External sound system is not working
Hi, the sound system is not working for my MacBook. It is working perfectly for my PC, however, when I plug it into my mac, every sound playing is being paused (e.g. iTunes are being paused on the second playing). What could be the issue?
That is what I am asking. It just does not make since that the Macbooks audio out/headphone plug works on some systems and not on that particular system.
If the system you are trying to use does not plug into the AC wall socket to get power then that could be one of the problems. But I believe you have try to tell us that is does plug into the AC wall plug and then plugs into the Macbooks headphone plug.
Is it possible that the Jack on the sound system you are experiencing problems with is bad?
Does the sound actually pause or just cut sound in/out similar to how a loose speaker wire might sound like?
Have you tried using this sound system on a different computer to see if the problem still exist?
Similar Messages
-
I have hp laptop from last 2 days sound system is not working
hi my laptop sound system is not working i cant hear the music
Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & install the latest Audio driver.
http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
```````````````````````````````````````
If still no sound,try a hard reset, works sometimes.Disconnect all external devices first.
1-remove power cord and battery
2-press power button for 30 seconds
3-reinstall only power cord for first startup.
4-power on
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
My sound system does not work AFTER installing pc to tv wireless connection
my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.
Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
My sound system is not working after my last updates on my imac,what shall i do to get fixed?
Hello any body who can help me out here?
My sound system is not working on my imac after the last updates,
WHAT SHALL I DO FOR????apollos211,
You marked this as solved, so chances are no one else will respond.
You can try going Applications>utilities>audio MIDI set up, output tab and check to see if built in is selected.
Also check in system preferences>sound >output and see what is selected there.
If you look in the headphone port and see a red light (this means it is in digital mode), try taking a set off headphones and plugging them in and out several times also wiggle them around gently. There is a micro switch that sometimes gets stuck.
Hope this helps, if still no joy try reposting so that more contributers might check it, as once checked as solved it reduces the number of people checking.
All the best -
Sound system is not working. Stand option no more available.
I have HP pavillion dv 1000. After formatting the laptop, sound system is not working. I can't hear any video sound; stand by and hibernate options are no more available. Please help me.
This question was solved.
View Solution.Nazia2011 wrote:
I have HP pavillion dv 1000. After formatting the laptop, sound system is not working. I can't hear any video sound; stand by and hibernate options are no more available. Please help me.
Well actually, if you really performed the impossible as you stated "formatted the laptop" how could anything work?
One can format and partition a hard disk which is a component of a laptop. Without reinstallation of an OS how can anything work?
Please restate in clearer terms what you did to which component to achieve nothing working.
Identify your notebook in more concise terms than just the series number from the front. Turn your notebook over and look at the tag. Post all but the serial number from the barcoded tag.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Sound system completely not working
Dear Sir,
I have a HP Pavilion g6 Notebook PC running Windows 8 Single Language 64-bit,
Serial no: [Personal Information Removed]. All of a suuden a few days back when I opened the system I found sound system not functioning at all. I cannot hear any sound from either the speakers or the head set. I even tried recovering my sysem using recovery CDs, still I am not geting back the sound.
Could u please help me.
Thank you,
ParvathyHello EMANAHMED,
I see that you are having problems with the sound on your HP computer. I have some suggestions that may help with this issue.
Here is a link to some sound troubleshooting steps for Windows 8 computers. If you are still having problems with the sound and you have ran a recovery to the factory settings of the computer, I would suggest contacting HP support for repair options.
Here is a link to the contact options for HP support.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
The Open Sound System is not working
I have installed and configured OSS following the Wiki, but I still get no sound. Any idea of what problem this is?
Thanks in advance.
Last edited by R_Rios (2009-09-22 21:26:31)I have also have a problem with OSS4 on KDE 4.3. I have installed installed and got the sound but the volume output is too low even When I set it to max
> ossmix
Selected mixer 0/High Definition Audio ALC883
Known controls are:
jack.green.mode <front|rear|center/LFE|side|pcm4|input> (currently front)
jack.green [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
jack.green.mute ON|OFF (currently OFF)
jack.pink.mode <front|rear|center/LFE|side|pcm4|input> (currently front)
jack.pink [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
jack.pink.mute ON|OFF (currently OFF)
jack.fp-pink.mode <front|rear|center/LFE|side|pcm4|input> (currently front)
jack.fp-pink [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
jack.fp-pink.mute ON|OFF (currently OFF)
jack.blue.mode <front|rear|center/LFE|side|pcm4|input> (currently input)
jack.blue [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
jack.blue.mute ON|OFF (currently OFF)
jack.fp-green.mode <front|rear|center/LFE|side|pcm4|input> (currently front)
jack.fp-green [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
jack.fp-green.mute ON|OFF (currently OFF)
record.mix.mute.mic1 ON|OFF (currently OFF)
record.mix.mute.fp-mic1 ON|OFF (currently OFF)
record.mix.mute.linein1 ON|OFF (currently OFF)
record.mix.mute.fp-headphone1 ON|OFF (currently OFF)
record.mix.mute.green1 ON|OFF (currently OFF)
record.mix.mute.input-mix1 ON|OFF (currently OFF)
record.mix1 [<leftvol>:<rightvol>] (currently 46.4:46.4 dB)
record.mix.mute.mic2 ON|OFF (currently OFF)
record.mix.mute.fp-mic2 ON|OFF (currently OFF)
record.mix.mute.linein2 ON|OFF (currently OFF)
record.mix.mute.fp-headphone2 ON|OFF (currently OFF)
record.mix.mute.green2 ON|OFF (currently OFF)
record.mix.mute.input-mix2 ON|OFF (currently OFF)
record.mix2 [<leftvol>:<rightvol>] (currently 46.4:46.4 dB)
misc.mic [<leftvol>:<rightvol>] (currently 46.4:46.4 dB)
misc.fp-mic [<leftvol>:<rightvol>] (currently 46.4:46.4 dB)
misc.linein [<leftvol>:<rightvol>] (currently 46.4:46.4 dB)
misc.fp-headphone [<leftvol>:<rightvol>] (currently 46.4:46.4 dB)
misc.green [<leftvol>:<rightvol>] (currently 46.4:46.4 dB)
misc.input-mix <mic|fp-mic|linein> (currently mic)
misc.front-mute ON|OFF (currently OFF)
misc.input-mix-mute1 ON|OFF (currently OFF)
misc.front1 [<leftvol>:<rightvol>] (currently 37.4:37.4 dB)
misc.front2 <front|input-mix> (currently front)
misc.rear-mute ON|OFF (currently OFF)
misc.input-mix-mute2 ON|OFF (currently OFF)
misc.rear1 [<leftvol>:<rightvol>] (currently 46.4:46.4 dB)
misc.rear2 <rear|input-mix> (currently rear)
misc.center/lfe-mute ON|OFF (currently OFF)
misc.input-mix-mute3 ON|OFF (currently OFF)
misc.center/lfe1 [<leftvol>:<rightvol>] (currently 46.4:46.4 dB)
misc.center/lfe2 <center/LFE|input-mix> (currently center/LFE)
misc.side-mute ON|OFF (currently OFF)
misc.input-mix-mute4 ON|OFF (currently OFF)
misc.side1 [<leftvol>:<rightvol>] (currently 46.4:46.4 dB)
misc.side2 <side|input-mix> (currently side)
misc.pcm4-mute ON|OFF (currently OFF)
misc.input-mix-mute5 ON|OFF (currently OFF)
misc.pcm41 [<leftvol>:<rightvol>] (currently 46.4:46.4 dB)
misc.pcm42 <pcm4|input-mix> (currently pcm4)
vmix0-enable ON|OFF (currently ON)
vmix0-rate <decimal value> (currently 48000) (Read-only)
vmix0-channels <Stereo|Multich> (currently Stereo)
vmix0-src <Fast|High|OFF> (currently Fast)
vmix0-outvol <monovol> (currently 25.0 dB)
vmix0-invol <monovol> (currently 25.0 dB)
vmix0.pcm8 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB) ("knotify4")
vmix0.pcm9 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)
vmix0.pcm10 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)
vmix0.pcm11 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)
How to Increase volume to max level?
[edit]
Some extra info
> ossinfo
Version info: OSS 4.2 (b 2000/200909090620) (0x00040100) GPL
Platform: Linux/x86_64 2.6.30-ARCH #1 SMP PREEMPT Wed Sep 9 14:16:44 CEST 2009 (moody)
Number of audio devices: 8
Number of audio engines: 12
Number of MIDI devices: 0
Number of mixer devices: 1
Device objects
0: osscore0 OSS core services
1: oss_hdaudio0 Intel HD Audio interrupts=13214547 (13381872)
HD Audio controller Intel HD Audio
Vendor ID 0x808627d8
Subvendor ID 0x1458a002
Codec 2: ALC883 (0x10ec0883/0x1458c603)
2: oss_usb0 USB audio core services
MIDI devices (/dev/midi*)
Mixer devices
0: High Definition Audio ALC883 (Mixer 0 of device object 1)
Audio devices
HD Audio play front /dev/oss/oss_hdaudio0/pcm0 (device index 0)
HD Audio play rear /dev/oss/oss_hdaudio0/pcm1 (device index 1)
HD Audio play center/LFE /dev/oss/oss_hdaudio0/pcm2 (device index 2)
HD Audio play side /dev/oss/oss_hdaudio0/pcm3 (device index 3)
HD Audio play pcm4 /dev/oss/oss_hdaudio0/pcm4 (device index 4)
HD Audio play spdif-out /dev/oss/oss_hdaudio0/spdout0 (device index 5)
HD Audio rec mix /dev/oss/oss_hdaudio0/pcmin0 (device index 6)
HD Audio rec mix /dev/oss/oss_hdaudio0/pcmin1 (device index 7)
Nodes
/dev/dsp -> /dev/oss/oss_hdaudio0/pcm0
/dev/dsp_in -> /dev/oss/oss_hdaudio0/pcm0
/dev/dsp_out -> /dev/oss/oss_hdaudio0/pcm0
/dev/dsp_ac3 -> /dev/oss/oss_hdaudio0/spdout0
/dev/dsp_mmap -> /dev/oss/oss_hdaudio0/pcm0
/dev/dsp_multich -> /dev/oss/oss_hdaudio0/pcm0
I also ran "osstest" command and I only twice and rest there is no sound
No sound
/dev/oss/oss_hdaudio0/pcm1 (audio engine 1): HD Audio play rear
- Performing audio playback test...
<left> OK <right> OK <stereo> OK <measured srate 47995.00 Hz (-0.01%)>
/dev/oss/oss_hdaudio0/pcm2 (audio engine 2): HD Audio play center/LFE
- Performing audio playback test...
<left> OK <right> OK <stereo> OK <measured srate 47993.00 Hz (-0.01%)>
/dev/oss/oss_hdaudio0/pcm3 (audio engine 3): HD Audio play side
- Performing audio playback test...
<left> OK <right> OK <stereo> OK <measured srate 47993.00 Hz (-0.01%)>
/dev/oss/oss_hdaudio0/pcm4 (audio engine 4): HD Audio play pcm4
- Performing audio playback test...
/dev/oss/oss_hdaudio0/pcmin0 (audio engine 6): HD Audio rec mix
- Skipping input only device
/dev/oss/oss_hdaudio0/pcmin1 (audio engine 7): HD Audio rec mix
- Skipping input only device
I hear the Sound
dev/oss/oss_hdaudio0/pcm0 (audio engine 0): HD Audio play front
Note! Device is in use (by PID 0/VMIX) but will try anyway
- Performing audio playback test...
<left> OK <right> OK <stereo> OK <measured srate 47980.00 Hz (-0.04%)>
/dev/oss/oss_hdaudio0/spdout0 (audio engine 5): HD Audio play spdif-out
- Performing audio playback test...
<left> OK <right> OK <stereo> OK <measured srate 47993.00 Hz (-0.01%)>
Please help
Last edited by cool (2009-09-23 12:07:12) -
My mic,front speaker,back speaker,audio jack nothing is working. I can't listen others talking with me and there are not able to listen me
Did you consider the Nokia Software Recovery Tool on a Windows computer already?
-
MY EXTERNAL SPEAKER PORT IS NOT WORKING for hp envy
MY EXTERNAL SPEAKER PORT IS NOT WORKING .WHEN I CONNECTED TO A EXTERNAL SPEAKER ,THERE WERE NO SOUND AUDIBLE.SO WHEN I DISCONNECTED THE CABLE FROM PORT,I WAS ABLE TO HEAR WITH THE IN BUILT SPEAKERS.EXTERNAL SPEAKER IS I GOOD CONDITION.I CHEKED WITH MY HEAD SET ALSO.IT WAS NOT AUDIBLE.MY LAP IS HP ENVY .KINDLY HELP
Hi ano87, welcome to the HP Forums. What is the model or product number? What version of Windows is installed?
Guide to finding your product number
Which Windows operating system am I running?
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
SB04100 Sound Blaster Card not working after computer rebuild
=SB0400 Sound Blaster Card not working after computer rebuildZ I did a full disk format and reinstall for a friend on a Dimension 3000, running XP SP3. There is no sound at all. Speakers are good, tested on another system. Model number on the back of the sound card is SB0400, so I assume this is an older 24 bit PCI SoundBlaster card. Although I reinstalled all drivers from Dell, I found no drivers for this. The Creative site has no listing for this model.
Computer does not seem to recognize the card. Have not opened the box yet but I assume if I were to remove and then reinstall the card it would be recognized (?) I then have to find an SB0400 driver.
Does anyone know where I can find an SB0400 driver ? Does the strategy of pulling and reinstalling the card make sense ? (I have really avoided tampering with any of the hardware on this box -- since it is not mine.)Re: SB0400 Sound Blaster Card not working after computer rebuild? Thanks much for your response. Problem solved for now. I removed the board and then reinserted it, after which I was able to download the drivers directly. Some of my difficulty with this whole process has been ) I didn't know there was no working speaker in the computer and 2) I apparently misunderstood the BIOS settings for this. I re-set it up as an add-on board during the troubleshooting process. After loading the driver, I went back to the original setting (don't recall what it was but it was for integrated sound). The setting for integrated sound works fine, with external speakers and the new 24 bit driver. Still some noise (popping and static) but this board shares the bus with 2 other cards one of which is a wireless network card. May be a PCI latency issue but I'm reluctant to change that because the network card is a bit shaky anyway.
Everything works for now -- I'll be glad to get this particular computer out of my house ! -
External USB HD does not work with HAL:
External USB HD does not work with HAL:
From the last 10 days the HAL auto-mount with ntfs-3g file system of my external hard drive does not woks.
But the manual mount procedure with the command mount -t ntfs-3g /dev/sdb* /mnt/XYZ works.
I've followed the instructions in the wiki: http://wiki.archlinux.org/index.php/HAL and the system has worked up to the last kernel or HAL update.
My fat32 usb-stick works without any problem.
If I try to open the device with KDE it appears an error popup wit this message:
TODO: have to rethink extra options
Error: kio_media_mount_helper
The log from the kernel.log is
Nov 6 22:03:16 myhost usb 5-1: new high speed USB device using ehci_hcd and address 4
Nov 6 22:03:16 myhost usb 5-1: configuration #1 chosen from 1 choice
Nov 6 22:03:17 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 6 22:03:17 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 6 22:03:17 myhost Initializing USB Mass Storage driver...
Nov 6 22:03:17 myhost scsi6 : SCSI emulation for USB Mass Storage devices
Nov 6 22:03:17 myhost usb-storage: device found at 4
Nov 6 22:03:17 myhost usb-storage: waiting for device to settle before scanning
Nov 6 22:03:17 myhost usbcore: registered new interface driver usb-storage
Nov 6 22:03:17 myhost USB Mass Storage support registered.
Nov 6 22:03:22 myhost scsi 6:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0811 PQ: 0 ANSI: 0
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sdb: sdb1
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Attached SCSI disk
Nov 6 22:03:22 myhost sd 6:0:0:0: Attached scsi generic sg2 type 0
Nov 6 22:03:22 myhost usb-storage: device scan complete
and the error.log is
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Do you have some idea ....
Bye.I have done the following:
Downloaded the patched hal version.
used makepkg in /abs/local/trunk/ to create a pkg for pacman
used sudo pacman -U pkgname to install it.
used sudo nano /etc/hal/fdi/policy/preferences.fdi to create the fdi file with the following content:
saved the file and removed my ntfs entryes from fstab and rebooted. and still there is no automount off ntfs partitions.
have i done something wrong?
br fjodork
WARNING: what follows is a guide of what did work for me, I'm still in an early stage of learning linux, so please correct me if anything of what follows is wrong/dangerous/stupid. As I said, this worked for me, it's not pretty, since I was learning each step on the fly and I'm sure there are better ways to do this.
So fjodork, you seem to have done the the necessary steps, though i couldn't get it to work until i first removed hal without dependencies
pacman -Rd hal
it will give you some warning about the dependencies, ignore it since we are reinstalling hal in a few steps.
First i tried to follow Raymano's link, obviously it showed me nothing in the browser so I thought it might be a broken link.
So I downloaded the source tarball from here http://hal.freedesktop.org/releases/hal-0.5.10.tar.gz
unpacked it changed the /tools/hal-storage-mount.c as per Milfadoodle's instructions.
at first I tried to compile directly from source, the process would finish without a glitch though after reboot nothing changed, as if hal weren't
installed, i guess there were issues with paths. anyway read on
Then repacked the source in tarball, copied it to /var/abs/extra/system/hal and modified the PKGBUILD as follows
makedepends=('pkgconfig' 'gperf')
options=('!libtool')
install=hal.install
source=(${pkgname}-${pkgver}.tar.gz #removed url so makepkg looks in the current directory for the tarball
hal
hal-policy.patch
cryptsetup_location.patch
hal-0.5.9-hide-diagnostic.patch
ntfs3g-valid-options.patch)
md5sums=('6641c30a27c00485c6accac5110ff911' # replace with md5sum of your package's sourceball (run md5sum filename)
'882f67668cb14a0a9e4a27ef22278027'
'5ba8b610aa9763a5f42b9f7cbd7a86ad'
then makepkg (i had to add --asroot, don't ask why
and finally pacman -U hal-0.5.10-1-i686.pkg
another reboot and everything worked without a glitch!:D (yeah i know i still haven't got rid of the reboot mentality )
I have also put the policy files as per the wiki instructions.
PS: I know this is a dirty way to getting things done but as i said, I'm just starting
If anyone could comment/correct/explain this post I'd be more than happy, the automount issue was bothering me for about a month now (you'll say why do I need ntfs in the first place? well, I only recently switched for Linux as my primary OS, these are some relics of the M$ era -
System.out not working on eclipse
Greetings...
I am no longer a newbie on Java, but I have been facing an issue lately that I have been unable to resolve myself, even though it seems to be something so silly.
I have been using eclipse for development, and by developing a simple "Just to practice" code I have found myself unable to use System class or any of its methods at a certain point. See the code below:
package one;
import java.util.Scanner;
public ClassOne {
public static void main (String args[]){
Scanner reader = new Scanner(System.in); /*Works just fine here*/
int x = 0;
System.out.println("Type in the number of objects expected"); /*Does not work at all, like if System was something I could not use at all. Not an identifier */
Scanner readertwo = new Scanner(System.in); /*System does not work here either*/
}Even if I rewrite the code after that, by erasing the import statement and all other System references in the code, System does not work again.
If anybody has ever faced the same issue and knows what I am doing wrong and what I can do to fix it, I'd really be grateful.
Thanks to all, and happy 2009.
Santana TSantana_Thiago wrote:
It works on NetBeans.
On eclipse I get the following error:
ERROR: JDWP Unable to get JNI 1.2 Environment, jvm->GetEnv() return code = -2+
*JDWP exit error AGENT_ERROR_NO_JNI_ENV(183): [../../../src/share/back/util.c:820]*+
The funniest thing is that if copy and paste the code from somewhere else into eclipse it works. What a drag!!!!
Thank you.
Santana TNever seen that error but it sounds to me that your Eclipse installation is screwed up! -
External Hard Drive does not work with Lion
Hi
My External Hard Drive does not work with Lion this message appears:
NTFS-3G could not mount /dev/disk1s1
at /Volumes/My Passport because the following problem occurred:
/Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8).
the MacFUSE file system is not available (71)
can anyone help?Hi,
See this Discussion:
https://discussions.apple.com/thread/3191198?start=0&tstart=0
Cheers, -
I cannot get any sound..it says my sound card is not working properly...how do i fix this.
HP PC 2000 notebook, windows 7 operating system
can't get any sound..says the sound card is not working..how can i fix this...You need to contact Adobe for you billing problem this is a user four not adobe customer support.
For your Photoshop Problems this user community may be helpful.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc. -
My onboard soundchip vs. Sound Blaster Audigy 2 NX external sound system
Hi,
I have a Sony PCV-RZ504 computer which has an onboard soundchip (Analog Devices AD98B 6-bit CD-quality stereo sound AC 97 2.). I use a Logitech Z-2200 speakerset (2 x 40 w) with subwoofer (20 w). I'm not fully satisfied with the sound quality and I think that a better soundcard would do justice to my speakerset. I'm not sure how the quality of my soundchip is, but I think that the sound from the speakers would be better if I would have a better soundcard?
I prefer not to open my computer and I just saw this Sound Blaster? Audigy? 2 NX external sound system: http://uk.europe.creative.com/produc...04&product=903
Can someone tell me if I can expect a better sound quality with this system than I have now with my onboard soundchip?
I see that this system deli'vers up to 7. surround but I use two speakers. Would it still be an improvement for me?
If I would use this sound system would I have to remove or disable my onboard soundchip? If so, how?
Thanks,
Rik.
Message Edited by rikdenhaag on <SPAN class=date_text>2--2005 <SPAN class=time_text>07:03 PM
Message Edited by rikdenhaag on 2--2005 07:03 PMA dedicated soundcard will almost always be an improvement on the onboard models. To disable the onboard sound you disable it in the bios sreen. Your manual will tell you how to accrees bios,
Maybe you are looking for
-
How to store XML and search within tags
My question =========== exactly what steps do you need follow to take an XML doc, store it, and query based on a tag value. The 8i Intermedia text option Reference refers to XLM_SECTION_GROUP feature. However, no examples are given. There is no user
-
Finder always opens in icon view...
...despite my having set column view in preferences. Can this be fixed?
-
Everytime I compile and run my java programs an old class file is ran. How can I stop this.? I reset my pc, move the folder even change the name of the file but nothing works!!! Help?
-
Scan with Image Capture freezes OS
Since I updated to Mavericks the system freezes when I scan in Image Capture. This occurs with two different scanners, a Epson Perfection V30 and a Lexmark X364dw. When I start the scan in Image Capture it seems to work. Then Image Capture shows the
-
Download older version of Swing app using JWS
Hi In my project, I have a Swing GUI which is launched using Java Web Start. I have to sometimes move the Swing app to a previous version i.e. I deploy a previous version of the WAR file (which has on old timestamp). But, since JWS looks for only the