External Speaker turns on when call answered for 5 sec's.

Help! Every call I answer, the external spkr turns on for 5 seconds and then turns off. Just enough time
that I cant hear who it is thats calling me!! Any ideas? Thanks.

I too have a couple of seconds of speaker. Plus it takes so long after I hit the green button to answer, That I usually miss the call anyway. Very frustrated!!

Similar Messages

Loud Speaker Turns on during call . Any solution ?

Loudspeaker turns on during call with an option showing me that its in handset mode and offcourse it still gives me an option to switch the loudspeaker on . Is there any solution for this tried updating the software and all ...
If any other solutions pls let me know ....
I had this problem with my N8 which i got on October 11 2010 since then i have been to Nokia Care more than 30 times for service and other problem . Atlast they gave me a replacement handset (swap is what they call) a week back but even with the New handset i am facing the same problem .. Is there any solution
Regards
Vikash

No Bro it doesnt works ...
Tried it with a different Sim card as well but facing the same problem Loud Speaker turns on by itself ... ... Dont know if there is ever gonna be a solution for this . . Even Nokia care has no solution for this problem .. I guess the Nokia Technician are incapable or inefficient of sorting the issue ..
Do tell me if u have anything else which i could try ...
Thanks
Vikash

Speaker turns off everytime I answer phone

I have a bluetooth earpiece with A2DP capability (Jabra BT8040). I like to have the sound set to speaker as a default (otherwise you can't hear the phone ring or get notifications) but whenever I use the bluetooth earpiece it automatically sets ALL sound to go through the bluetooth earpeice and does not set it back to speaker mode after the call is complete. I always have to manually set the sound back to speaker, which sort of defeats the purpose of having a hands free earpiece. Are there any solutions to this out there? I find it hard to believe I am the only one with this problem but I haven't seen anyone else mention it. I already tried unpairing and re-pairing the earpiece just in case the problem was with the pairing.

Indeed, this issue exists; it DOESN'T RING through the headset, though! At least for me, using a Jabra BT530 A2DP-capable headset. I too believe that there should be some option panel under bluetooth that allows you to set default ouputs for every kind of sound (it's not very useful to hear the camera or the unlock sounds through the headset), but it's not THAT annoying, since the phone RINGS as it should, through the SPEAKER.

E71 hangs when call answered

Hi Nokians,
A moment ago, when I click "green" key to answer a call, my E71 hangs (No backgroud application is running)
E71 is a great device but as days go by, more and more issue happened (refer below).
I cannot accept a phone that hangs when answering a call. It does not improve my productivity at all. My previous Treo 680 had the same problem, that is why I switched to E61i, and now E71.
To Nokia: you better improve! Cause E71 may be my last phone from Nokia.
List of bugs
1. Active Notes does not appear when call is make to the linked contact
2. GPS not able to lock to satellite, and display current location on map (solved by changing the positioning server to supl.nokia.com)
3. I connect to the email account and retrieve emails, the application shut down and returns to the home screen.
4. I have 2 e-mail mailboxes, the 2nd mailbox disappeared when auto-retrieval is turned on, all e-mails are lost!
5. Unable to terminate/hang-up when called number is busy (partially solved if automatic redial is diabled) or when an incoming call ends.
6. When set powersaver to "None", when the screen goes to power save mode, it display a time. The time stops at that moment. And will no tick at all.
7. Automatic Retrieval > E-Mail notifications > only in home network . When I open an incoming SMS, a warning message appeared, "Messaging: Memeory Full. Close some applications and try again." . I checked my phone's memory, it has 95MB free memory. I need to disable E-mail notifications, then only I am able to open an incoming SMS.
8. The recent call list (in, out and missed) shows all icons as "mobile" despite the number is a telephone number.
9. I am not able to enable both
- Automatic retrieval > E-mail notifications
- Automatic retrieval > E-mail retrieval
E71 only allows either one of the above to be enabled
10. Sometimes, E71 will hang when answering a call.
200.21.118
27-11-2008
RM346
NOKIA E71-1(26)
Message Edited by mecool2008 on 11-Feb-2009 10:16 PM

Hi,
I am also facing some of the problems you have listed.
My frined has Nokia E71 but with older FM 100..... He do not have much problems.
Nokia has to fix these problems at the earliest.
bye,
raj707
Mumbai - India
=====
200.21.118
E71-1
RM-346
=====

IPhone 4 audio unavailable when calling/answering phone calls.

When I place a call, or receive a call, I am unable to hear anything on the other end, and the other user can't hear me.
If they call and leave me a message, I can listen to that just fine. All other audio works - apps, music, voicemail, etc. I can even Facetime chat without problems, it's just my phone call that drops out.
I've tried the headphone trick, as well as compressed air, restarted, left off for long period of time, removed/reinserted SIM card. None of it seems to help. Any thoughts?

Hi Friend,
Try to use the volume buttons to adjust it. Go to Settings>>Sounds, and check if Adjust Volume with buttons is turned on.
Check in Settings>>General>>Restrictions if there is a restriction for volume turned on. If yes, turn it off and set the volume limit as higher as possible.
The speaker is easy to break if wet, even wet for a little. My girlfriend's iPhone speaker broke with some drops of a drink.
Anyway, check if Restrictions is turned on, rebbot your idevice, be sure you have selected a pernonalized sound (ringtone) that works (change to a standard ringtone), check if "Do Not Disturb" is turned off.
Go to Settings >> Sounds and turn Adjust with Buttons on. In Message sound, be sure you set a standard Apple ringtone. Tap it again to listen the ringtone ringing. If not ring, well, your speaker probably has a problem.
Hope it helps

External display turns off when macbook isn't charging...

I have my old 2007 white Macbook hooked up to an external display. Recently I have been wanting to calibrate the battery while using it on the external display, but every time I remove the charger from the Macbook the external display will stay on for a couple of seconds then turn off, it will only come back on when I click the mouse or press something on the keyboard, but then it will go back to sleep. Note: when my Macbook is connected to the external display I keep the screen closed.

When you are looking at the displays in the System Prefs, all you have to do is click and drag the tiny rectangular bar from the main screen to the external monitor screen (this designates the primary monitor).
Once you've done that, all you have to do is close the lid. Your screen will flash a couple times, but the external monitor will then remain on and working, and you dont need to keep your lid open.
FYI, I would turn down the brightness of your MBP down all the way (for both the screen and keyboard). I have found that this reduces any heat build up that it may have from running with a closed lid.
Hope this helps!
Ben

Iphone 4s turns off when using flash for photograph

so here is my problem. i have an iPhone 4s 16gb bought back at launch in 2011. since updating to ios6 i have this dumb issue.. whenever i try and click a photo using the stock camera app (with FLASH) the phone (sometimes) just turns itself off and when i try turning it back on, it tells me i need to connect it for charging (regardless of how much juice is remaining).. when i try turning it on after a few minutes it boots up normally with the amount of battery it had prior to the shut down.. i thought that the new software updates might solve this issue but it hasnt at all.. i have searched these forums and it seems im not the only one having this issue.. even upgrading to ios7 did nothing and its still the same.. it was working fine when i had ios5 out of the box.. also when i use flash (in a low light enviorment) the images are completely washed out/ heavily overexposed.. i mean you can only see the 4 corners of the picture.. i have no covers etc on the phone just fyi.. btw this only happenes in the stock ios camera app and not any of the 3rd party apps that i have tried.. also when i use the new quick flashlight it works perfectly without issue till the battery really drians out (just fyi for a perspective).. is there like a fix that im unaware about? or apple doesn't care about 4s people anymore??

Same thing happening here.
iphone4s 64gb switches off when taking pictures (sometimes) (often enough to be annoying!)
always with 10-40% of battery remaining
it shows flat battery animation and will NOT switch on, even if holding both buttons for 2mins+
but it turns on immediately when i connect charger, no waiting to charge
and immediately shows 10-50% of battery that i knew it had
it also did it once when playing music and then someone called me
device switched off when i pressed answer button
i am on 5.1.1 but know others on forums running 6.0.1 with same problem
so telling me to update will be pretty stupid advice
it did not happen on 5.0 (but that was when battery was new - 4 months old!)
had device for 13 months so warranty/swap is out of the question
as i paid £270 upfront for the device and still have to pay £37 per month to o2-UK for another year
i find it disgusting that i would have to pay to have it fixed/swapped considering its not my fault
im actually looking for a definite fix for this
NOT the usual 'take it to apple store' babble as i cant afford that
but we all know im not gonna get one....

IPhone 5 speaker turns off during call

32gb iPhone 5. When on speaker during call, switches automatically back to iPhone inadvertently. On call with only one person. No incoming calls causing issue.
Tested on other calls by putting phone on solid surface without touching. Not a PIBPAC error. Please advise if you're experiencing similar issue and how you solved for it. Thank you

I figured out a solution. Apparently it was a software malfunction. I got the toll free number off the web (1-800-MY-APPLE) and called and gave them my information. They gave me three different options to send my phone in for repair or replacement. The entire replacement process took a out 5 days from the day I called to the day I received the new phone and ended up costing me absolutely nothing. The apple support team was very friendly, courteous, and knowledgable. A software malfunction sounds like it could be your issue, you may want to look into this! Hope this helped!

Error messages when calling RSDRI_INFOPROV_READ for more than one time

Hello all,
I need to write a cube, however, before I do this I need to check whether there are already data in the target cube for a certain accounting period. This I do by reading the cube via FM RSDRI_INFOPROV_READ. The following coding is called from a running program after pushing a button on the screen.
<i>* clear internal tables.
      CLEAR gt_range.
      CLEAR gt_sfc.
*fill internal tables
      CLEAR ls_sfc.
      ls_sfc-chanm    = '0FISCPER'.
      ls_sfc-chaalias = '0FISCPER'.
      ls_sfc-orderby = 0.
      INSERT ls_sfc INTO TABLE gt_sfc.
      CLEAR ls_range.
      ls_range-chanm    = '0FISCPER'.
      ls_range-sign     = rs_c_range_sign-including.
      ls_range-compop   = rs_c_range_opt-equal.
      ls_range-low      = '2007001'.
      APPEND ls_range TO gt_range.
here I do not know what exactly to do with this flag
      lf_first_call = abap_true.
      CALL FUNCTION 'RSDRI_INFOPROV_READ'
        EXPORTING
          i_infoprov             = 'T01'
          i_th_sfc               = gt_sfc
          i_th_sfk               = gt_sfk
          i_t_range              = gt_range
          i_packagesize          = 1
        IMPORTING
          e_t_data               = lt_rd_cube
          e_end_of_data          = lf_eod
        CHANGING
          c_first_call           = lf_first_call
        EXCEPTIONS
          illegal_input          = 1
          illegal_input_sfc      = 2
          illegal_input_sfk      = 3
          illegal_input_range    = 4
          illegal_input_tablesel = 5
          no_authorization       = 6
          illegal_download       = 7
          illegal_tablename      = 8
          trans_no_write_mode    = 9
          inherited_error        = 10
          x_message              = 11
          OTHERS                 = 12.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      lf_eod = abap_false.
      IF NOT lt_rd_cube IS INITIAL.
        RAISE target_data_found.
        EXIT.
      ENDIF.</i>
When testing with a period for which data already exists, it runs through quite perfectly. The return table is filled and I know that data exists and I EXIT.
However, if I press the button again (program is still running) I get an error message 'Nested call of RSDRI_INFOPROV_READ'. And this for each time I press the button.
So I thought I should clear the flag lf_first_call. After having done so I get an error message 'SQL Error'. Funny is that I get this error only every second time the Function Module is processed. Every other time it works perfectly.
How can I get rid of those error messages?
PLEASE - can anybody help me?
Many thanks in advance,
Thomas

Hi,
you have something like:
end_of_data = ' '.
first_call = 'X'.
WHILE end_of_data = ' '.
        CALL FUNCTION 'RSDRI_INFOPROV_READ'
          EXPORTING i_infoprov             = ....
                     i_th_sfc               = ...
                     i_th_sfk               = ...
                     i_t_range              = ...
                     i_reference_date       = ...
                     i_save_in_table        = ....
                     i_save_in_file         = ....
                     I_USE_DB_AGGREGATION   = ...
                     i_packagesize          = 100000
                     i_authority_check      = ...
          IMPORTING e_t_data               = .....
                     e_end_of_data          = end_of_data
          CHANGING   c_first_call           = first_call
          EXCEPTIONS illegal_input          = 1
                     illegal_input_sfc      = 2
                     illegal_input_sfk      = 3
                     illegal_input_range    = 4
                     illegal_input_tablesel = 5
                     no_authorization       = 6
                     ncum_not_supported     = 7
                     illegal_download       = 8
                     illegal_tablename      = 9
                     OTHERS                 = 11.
ENDWHILE.
hope this helps...
Olivier.

7961 answering on speakerphone when call answered by CUEAC.

We have recently installed CUEAC 3.1.1.5 and it is set to use the handset. When the operator answers the call, the phone rings once and the call goes directly to speakerphone. When we call the phone directly it does not get answered on the speakerphone. How can we stop this calls from being answered automatically on the speakerphone?

check the preferance on the AC client. There should be something that states what the operator can use. Headset, speaker or handset. If its locked out, then you have to adjust at the AC Server

N8 vibrates when call answered

Hello there.
This is what happens: I call someone, that someone picks up/answers the call, my phone vibrates a few seconds after they asnwered causing a really anoying sound on the other side of the call.
I would apreciate if you could remind me how to disable this function.
Thank you very much for your time.
Solved!
Go to Solution.

Have you checked if there is an option to turn it off? Also, it may be due to an app. NetQin Mobile Guard creates the same effect on a 5800.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

403 Forbidden errors when calling GetUploadURL for iTunes U API

I am trying to test the uploading of XML to iTunes U using the provided
API. However, I am consistently receiving a 403 Forbidden response
(and resulting exception thrown in Java) when I attempt to get the
URL for upload with the call to /WebObjects/Core.woa/API/GetUploadURL/.
I am able to generate successful login URLs with identical calls to
/WebObjects/Core.woa/API/GetBrowseURL/, which successfully authenticate
me to iTunes U, with the same credential.
Furthermore, following a suggestion found online, I have issued calls to
/WebObjects/Core.woa/Browse/ with my debugging string appended, again
with the same credentials, and that SUCCEEDS, telling me that
"Because the received signature and time were valid, the received identity
and credentials were accepted by iTunes U" so I get no further information.
My system clock has the proper time, etc.
I am also able to retrieve an XML manifest of the contents of my site
by issuing a call to /API/ShowTree/, no problem whatsoever.
Any ideas of what might be the problem? Or perhaps some way I might be
able to do further debugging? Putting the debug string on the
GetUploadURL does nothing, the Forbidden overrides me getting any actual
response at all.
Thanks for any assistance.

Just a sanity check here ...
When you use GetUploadURL, and you want to send a web services XML document rather than an ordinary media file, you must also include the type=XMLControlFile token in your token string.
That is, normally, you create a token string this way:
credentials=your-creds&identity=your-identity&time=12345678&signature=big-long-h ex-string
When you want an upload URL for a web services request, you need to add one more token ...
credentials=your-creds&identity=your-identity&time=12345678&signature=big-long-h ex-string
&type=XMLControlFile

6210 - No ringtone or volume when call answer. Ple...

I cannot hear ringtone when I dial or voice when I receive any calls. I have checked the volume control, turned the phone off and on, removed and replaced the battery and SIM card and still cannot rectify the problem. Can anyone please help.

Hello,
Try to reset phone to the factory settings from Settings menu. It will ask security code. Enter 12345.
Regards,
Andrey
6150, 8310, 2100, 6310, 6310i, 6230, 6600, 6630, 6700, E60, N80, E61, N93
N95, E61i, E71, E72,8600, 5800, N8

Skype is crashing when calling/answering calls

Ever since i updated to windows 10 skype keeps crashing when ever i call someone, or someone calls me. Can anybody help me?

Please, run the DirectX diagnostics tool. Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.

My external speaker will not turn off

I can't figure out how to turn off my external speaker. Even when my headphones are plugged in, it still plays. I did not know this was happening until an airline attendent asked me to please turn down my music on a flight. Boy was I embarassed! I reset it to the original settings and it still has not cured the problem.

Make sure that your headphones are plugged all the way in meaning you cannot see any of the silver from the headphone's plug still showing. Once you have verified that, try a hard reset of the iPod. To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
B-rock

External Speaker turns on when call answered for 5 sec's.

Similar Messages

Maybe you are looking for