External Speakers = Only one works

Hello there
I'm having an issue with my speakers - I have some Altec Lansing speakers connected to my Dell Latitude E6400, and if I want to play audio, then there's only the right speaker working.
1. They run both if used with - for example - an MP3 player.
2. It doesn't matter what player I use or which song I play (it's the same issue).
3. The internal speakers of the laptop work both fine (but the quality is awful).
4. I think it's the fact that the left speaker is connected to the right via a RCA cable.
Any ideas?
Last edited by Kielo (2011-02-08 20:06:27)

Never mind, reboot with the speakers plugged in fixed that.. o.o
Last edited by Kielo (2011-02-09 04:43:59)

Similar Messages

  • EXTERNAL SPEAKERS DON'T WORK

    External speakers don't work. They are LABTEC LCS 2420 speakers. The internal speakers with RealTek driver works fine. I have an HP Pavilion 23 touchsmart All-In-One PC with windows 8. I plugged the speakers in the headphone port then tried the audio jack in the back with the same resullt. When I right click on the sound icon and click on playback devices and riight click  in the open area i checked  show disabled and disconnected devices only the speakers realtek icon appears. Do I need to download other drivers and how should I do this?

    Try the following: Control Panel > Hardware and Sound > Manage Audio Devices > in the 'Playback' tab you should see the ports (rear and headphone) > R-Click the one that you are using for your external speakers and make it the default device.
    Trust this helps.
    regards davida
    "Although I am an HP employee, I am speaking for myself and not for HP"

  • External speakers won't work

    The only time I can listen to music is through my Bluetooth. The external speakers don't work on my 4s. I have to start playing the song and in the lower right hand corner of iTunes it give me the option to switch between my Bluetooth or Dock Connector. When the Bluetooth isn't connected I get nothing. I've looked at every setting possible and even compared the settings to my husbands 4s. What should I do?

    Andrew Miller6...
    Are you shure that you connected it to the "headphone port"?
    That is the sound out port, as the other is an input port for a microphone.
    Other than the obvious maybe it has some incompatable tip on the jack. Test it with a known good set of headphones.
    ...Ron

  • I phone 5S 32GB Silver's External Speakers are not working.

    Model - Iphone 5S 32GB Silver
    IOS - 7.0.6
    Problem:
    I have Recently bought Iphone 5S 32GB model & was using it wisely. Since Yesterday I have realised my Phones External speakers are not working. all other features of the phone are working properly.
    Solutions Tried So far:
    Silent Mode On/Off
    Restarting Iphone
    Reset All Settings
    Complete Iphone Erase
    Please post if anyone else is having similar issues or have solution of this problem.
    Krupal

    No it shows "Volume" not "Headphones" when I try playing music via external speakers & trying to  adjust volume.
    I have noticed one thing.
    When i tried pushing/rubbing (Gently Not too Hard) bottom right front side of my Iphone ( exactly right side to Home Button) my speaker started working again for some time.
    when it stoped again i applied same method.
    Is this some kind of loose connection ?????

  • External speakers don't work with Maverick

    My external speakers will not work in Maverick....internal speakers ok. Tried rebooting, unplugging external speakers from back of computer, etc.......going to "sound" in System Preferences, only "internal speakers" is listed. Had external sound PRIOR to Maverick.....

    Boy, do I feel like an idiot !!!  I had the speakers plugged into the input RIGHT NEXT TO the headphone port !! I could have sworn that's where I unplugged them when I did some "housekeeping" on my desk ! I even labeled that port "speakers"............I must say though that the"output" in "sound" in sys. pref. NOW SHOWS UP AS HEADPHONES !! So SORRY for taking up your time, but you got my external speakers working, and for that I am VERY grateful !!  I guess in all your experiences you've seen it all, but................THANKS AGAIN !!!! 

  • After upgrading to Yosemite, my external speakers don't work.  Any clue what to do?

    After upgrading to Yosemite, my external speakers don't work.  Any clue what to do?

    System Preferences
         Sound (Make sure you have your external speaker cable or external headphones plugged in)
              Mute is selected (Uncheck Mute)

  • External Speakers Randomly Stop Working until I "Test" or Disable/Enable

    I'm using a HP Pavillion DV6 Notebook PC Running Windows 7 Professional 64-bit SP1.
    External speakers randomly stop working until I "test" or disable/enable them. Headphone/HDMI Audio Works.
    Background
    -Recently had to do a clean install of windows.
    -Went to the HP Drivers Website and downloaded all of the latest drivers.
    -I installed several other programs as well (Flash, Steam, Media Player, Browser)
    -The problem started
    Current Settings
    -My deafult device is "Speakers and Headphones: IDT High Definition Audio CODEC"
    -Enhancements are disabled
    -Bass and Treble are set to 4
    -Format is set to 16 bit, 48000 Hz (DVD Quality)
    -Allowing applications to take exclusive control of the device or not doesn't make a difference (but it's currently off)
    Troubleshooting
    -The audio works by plugging in headphones or using an HDMI device
    -The audio comes back if I go to my sound settings and hit "Test", or if I disable and re-enable the device
    Error Messages
    -Youtube starts the video for 3 seconds, restarts and sputters a bit, and then says that there was an error
    -My media player (MusicBee) gives me this message: "Unable to start playback (Error = BASS_ERROR_BUFLOST)"
    That's everything I can think of. Any ideas?

    Hi TheBigBoy,
    Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see that you are having a frustrating time with the sound to your external speakers. Have you tried connecting the speakers to another computer to see if is a hardware issue with the speakers? Do the regular speakers work? What is your product number as there are several models in the dv6 series?
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Why after updating to ios 7 on iphone 4g do I have 2 facebook icons?  Only one works.  How do I get rid of the other one?

    I recently update to the new ios 7 software on iphone 4.  Now I have 2 app icons for facebook.  Only one works and opens facebook.  How do I get rid of the other?  Tried deleting it out the old way but it has no "x" to take it out with?

    okay never mind.  I powered off and back on and the second not working icon is gone.  So if anybody else has this same problem, give it a try

  • External speakers suddenly stop working

    My 13" aluminum MacBook's internal speakers are working fine.  External speakers and headphones were also working fine until yesterday.  Now, external speakers do not work with my MacBook at all, and with headphones I get a very muddled, echoy sound.  This happened overnight - my laptop was just sitting, not plugged in, on my desk.  I've tried restarting and resetting the NVRAM - no help.
    I have a 13" Aluminum Unibody MacBook running OSX 10.7.5.
    Please help!

    >I had a quick look this morning and sure enough, a YouTube clip was playing, but no sound.
    This happened to me too using an Tecra A11 unit.
    The Youtube clip had no sound but if I plugged and re-plugged the headphone jack, the sound appeared again.
    I thought this was a problem with headphone jack but I wanted to check if this issue could be solved by driver reinstallation.
    Firstly I uninstalled the Realtek sound driver from the system. Then I entered the device manager and deleted the High definition Audio Controller from the System Devices area.
    In Audio , video and games controller I deleted the Intel display audio entry.
    Finally I rebooted the system.
    After new reboot the Windows recognized the deleted devices. I checked the playback tab in control panel -> sound and found new device Headphones which was not visible before.
    Then I started Youtube and checked the sound. It was available. Then I installed the newest version of Realtek HD audio driver and rebooted the unit.
    The sound was still there
    So hopefully it was just and driver issue

  • Why is it when I plug in any headphone that only one works?

    Why is it when I plug in any headphones that only one works?

    the song is in mono or only one track
    one of your headphones is broken
    there's something wrong internally in your iPod.
    Try different songs to see if all of them only play on one side. also try apps to see if the sound is on one side or both.
    Try a different set of headphones/ear buds to see if they sound different
    if neither of the above fixes it then you may want to have Apple check out the device and see if the jack is broken

  • My external speakers have stopped working. A circle with a line through it shows up when I try to adjust the volume.  I have been in system prefrences to check all the sound settings and everything is set properly.  What do I need to do to fix this. Help!

    My external speakers have stopped working. A circle with a line through it shows up when I try to adjust the volume.  I have been in system prefrences to check all the sound settings and everything is set properly.  What do I need to do to fix this. Help!

    Though I have doubts for success, you might try a SMC reset.  It can do no harm.  Otherwise, barring suggestions from others, the Apple Store or qualified repair facility is the last option.
    http://support.apple.com/kb/HT3964
    Ciao.

  • My external speakers are not working, any suggestions?

    My external speakers are not working, any suggestions?

    try different audio or USB cables.
    try the speakers with a different computer.
    go to the speaker manufacturer's website and see if there's some troubleshooting info or a new driver that you need.
    check System Preferences > Sound > Output
    see if the speakers show up in the sound output device list
    make sure the mute box is unchecked.
    Check Applications > Utilities > Audio Midi Setup
    see if your speakers are selected in the column on the left
    make sure the mute box is unchecked

  • External speakers don't work with Yosemite

    I have just upgraded my iMac to Yosemite and now my external speakers don't work.
    They are there to be used under System Preferences -> Sound as "Bose USB Audio"
    But when I select them I get no sound and "The selected device has no output controls"
    I do get sound if I select the Built-in Internal Speakers
    The Bose speakers worked fine under Mavericks.
    Can anyone help me get them working again ?

    Had similar issues with Bose Companion 5 after Yosemite installation. Tried most suggestions posted here without success.
    But Birkers' post about plugging in/out analog headphones from Bose puck gave me an idea.
    1. Removed Bose USB cable from iMac (Late 2014 Retina 5K / Yosemite 10.10)
         - confirm that Bose disappears from Sound panel in System Preferences
    2. Played music through internal speakers - OK
    3. Played music through 2nd Display speaker - OK
    4. Re-connected Bose USB cable to a different USB port
         - confirm that Bose appears in Sound panel in System Preferences
    5. - Bingo! Sound now playing trough Bose system

  • My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

    My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested.  How can there be audio issue for all these devices at the same time?
    As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

    Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
    I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
    What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
    Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
    Peace,
    P. Dreadie

  • External speakers only play form left side :(

    I have some Bose Companion 3 speakers on my Al 24" iMac and sometimes they only play out the left side. But if I unplug and plug in the speaker jack (on the mac) it works fine again. Any fix?

    so the sound plays through the internal speakers instead of the external speakers? what OS are you using?
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

Maybe you are looking for

  • An error has occurred during SWF generation.

    Hello We are receiving the error message "An error has occurred during SWF generation. Please contact the file creator or your system administrator" while trying to publish a dashboard to the BO server. But we haven't been able to assure the client w

  • Has anyone tried to upgrade windows 8 to 8.1 on mBPR via Windows store?

    Hello, Windows 8 is installed on the Mac Book Pro Retina Late 2013 (top configuration) via Boot Camp. When i try to run the upgrade via windows store it reaches 89% and when it is on the "preparing for restart" stage update fails. It reports that it

  • Securing RDS with SSL certificate

    Hi, is it possible to lock down 2008 R2 RDS so that a user can only connect to the server via RDP if they have the appropriate SSL certificate installed on their PC?

  • Issues with their Chinese or Japanese characters while sending mail

    Hi All , I am sending mail using FM SO_DOCUMENT_SEND_API1. I am facing problem with display of chinese and japanese character in mail attachment. For example , Data in ABAP table 延平路123弄1号10A is converted to ösï721_ 3S÷83L in excel sent via mail thr

  • Total subtract value obiee 11g

    Hi All, I have this kind of report: payroll earnings 500 deductions -100 grand total: 600 I use OBIEE 11.1.1.3 , and for the deductions I use formula column (case when deductions then value*-1). Is this bugs in Obiee 11.1.1.3?so the grand total show