External startup disks will not start with my new iMac
My external devices which are startup disks will not start when connected to my iMac, although it appears in the bootable drive selections after the chime sound, using the option (Alt) key. I get the bootable drive selections and when selecting it all I get is a gray screen with the apple logo and that is it. No matter how long I wait the start up does not happen. I am sure that the external device is not damaged because there is no problem to use it as a startup device when connected to my MacBook Pro.
Otherwise the devices work as they should. If I connect them to my iMac then they will appear on the desktop, etc. The only thing which does not work is that they cannot be used as startup disks, even though they work fine as startup disks if connected to my MacBook Pro.
Based on your description it is very hard to tell what is going on.
You appear to have an i7 iMac. That model was delivered with Snow Leopard (10.6.x).
My guess is that your external disks may have a version of OS X that predates the version supplied with your new iMac. You cannot run an earlier version of OS X than what was delivered with your Mac.
Similar Messages
-
When I try to use the scanner I get error message 'scanner not available' and the scanner indicator goes red . I have contacted Epsom who advised me to run System update on my Mac several times which I havedone to no avail. The scanner is in working order as it works satifactorily with my 'Windows' laptop. The scanner is listed as being included in the driver updates but It would appear that the driver on my iMac supplied in any update is not suitable.
I am currently running OSX 10.8.4
What steps should I now persue to be able to use the scanner?
Alan.Howdy Susiesdad,
I would suggest the troubleshooting steps from this article named Troubleshooting printer issues in OS X found here http://support.apple.com/kb/ts3147
Don't let the name throw you off, the troubleshooting is relevant for scanners as well.
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
All the best,
Sterling -
My iphone 4 will not sync with my new macbook air. It says that syncing refused to start. Any suggestions? FYI - all my apps and software are updated.
Thanks,
JodiClose iTunes. On your phone, double tap the Home button to bring up the multi-tasking bar, tap & hold any app until they all start to wiggle & a red minus sign appears. Tap the red minus sign to remove every app shown. Tap Home button when finished. Re-start your Mac, launch iTunes, connect your phone. See if things work now.
-
I am trying to run a hardware test. The Computer will not start with the "D" key held?
If you are using a Blutooth keyboard, don't hold the "D" key until the keyboard is recognised (green light)
Running AHT in Lion
http://support.apple.com/kb/PH4510 -
PC will not start with the battery and charger. There's no light, no noise on fan, hard drive and CD writer. The hard drive, fan and charger are new. But I was havingproblems and sudden blackouts System 32. Try several times to install theoperating system but the pc turned off suddenly and restarted until I stop working completely. Now it does nothing and no light. I hope it can help me I need torespect and love very much this notebook.
Thanks in advance
Jose Echevarria
[email protected]Turn off your laptop, unplug all wires, remove the battery, and hold the power button for thirty seconds. Afterwards, reattach the battery and connections. If it still won't start, remove the battery and start with just the AC power. Next try without the AC power and just the battery.
- Peter -
"Layer 1 does not start with a new cell" replicator error
Hi All,
I recently sent a dual layer +R DVD off to our replication house and their system is returning a message that says: "Layer 1 of DVD-Video does not start with a new cell".
I know from reading that the dual-layer breakpoint must be set to the end of a cell, but what does the word "cell" translate into for DVDSP4?
I had the DVD DL+R set to Automatic and Non-Seamless for output for the break point. Should I just try setting the break point manually at the beginning or ending of a track that would be dubbed as just a little more than half the size of the content? (I know in OTP, the Layer 0 has to be bigger than Layer 1)
Please Help!
Cheers,
DustyThanks both of you for your replies.
Eric, I am currently exporting DDPs to send in to the replicator. I also emailed them asking if they accept this format for delivery. (Which I would hope they would, as it is, an answer to DLT of sorts) Thanks for bringing this up, DDP is new to me, as this is our first DL project for replication.
Drew, to answer your reply, yes I have two viable markers (chapter markers) that show up in black, not grayed out, in the tab you mentioned under formatting. I chose manual break point selection for this last disc I burned and chose chapter 4 of that track. (chapter 4 and chapter 5 of track 6 are only options) I have to assume that the "automatic" setting was selecting chapter 5, as it had to see that as the last viable marker available to select, as described in the DVDSP4 manual.
DVDSP4 says that all markers are considered cells- Or actually that tracks are cells and that the markers within them make up more cells. So my question, outside of DDP option, would be, "what truly constitutes a cell boundary in DVDSP4?" Is it the markers within the tracks or the beginning or ends of the tracks themselves?
As a side note, I burned the disc that received the error, "Layer 1 doesn't start with a new cell" from an IMG i created from DVDSP4 through Disk Utility. Word is that IMG's somehow don't include breakpoint information.
So at this point I don't know if it is the IMG or the fact that DVDSP4 wants the break at one of two possible chapter markers in track 6.
(Some more background- this is a TV show season DVD, with thirteen tracks of video, each with 12-14 chapter markers a piece.)
Any more thoughts to help clear the air on what constitutes a true new cell boundary?
Thanks sooo much Eric and Drew, I know this a long read.
Cheers,
Dusty -
My safari will not open with the new iphone update
my safari will not open with the new iphone update...help
Hi Robin,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
I would first suggest you restart your iPhone to see if the issue persists.
iOS: Connecting to Wi-Fi
http://support.apple.com/kb/HT5569?viewlocale=en_US
Cheers,
- Judy -
I want old Firefox back. My credit union, Verity, will not open with the new version of Firefox I have downloaded.
@glennhaste, the public pages I visited seem identical in IE8 and Fx10, but you may be referring to a part of the site that requires logging in (impossible for non-customers to view).
Since the problem is so recent, can you recall any changes you made in Firefox, or are you aware of any changes your CU made on its site?
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
1. Clear Firefox's Cache
Firefox > Preferences > Options > Advanced
On the Network mini-tab > Offline Storage : "Clear Now"
2. If needed, delete the site's cookies here
While viewing a page on the site, "right-click" and choose View Page Info > Security > "View Cookies" (''Sorry, I don't know how you right-click on a Mac'')
Then try reloading the page. Does that help? -
I can't get my ipod touch to sync with my new computer. My old one died. I downloaded itunes and installed music but the ipod will not sync with this new computer. What do I do?
You can only sync with one iTunes library/computer. To switch:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities -
I got a new computer and my IPOD will not sync with the new computer.....I have a ITUNES account on the new computer and is downloading music just fine but it will not sync to the IPOD....What should I do to sync my IPOD? thanks
Copy the ENTIRE iTunes folder from the old computer to the new computer.
Attempts to sync an iDevice to a new computer will remove all content from the device and replace it with content from the new, empty library. -
I've tried reseting my sync accounts the way all of the help articles say, but my computer and two android devices just will not sync with this new FF Sync version.
I've tried unregistering the device sync accounts, removing the accounts, reinstalling FF on all devices, etc.
Nothing works. Please help.Hi mongoose00318,
On the android devices in the Account section of your OS settings, please make sure that the account is not listed under "Firefox Sync (deprecated)" this is the old sync. Firefox for Android may need to be reinstalled and the Firefox Sync (depricated) account removed from the device.
NOTE: DO NOT do this if there is data on the devices that have not obviously synced yet. An alternative is to visit accounts.firefox.com to see if you are logged into the device on the new sync sign in page.
Does this help? -
HT1619 my remote is not working with the new imac 27" :(
my remote is not working with the new imac 27" i do not know even if new imac has infrared at all , pcworld shop said yes it should work . but hey i tried everything including security setting checks
<http://store.apple.com/us/product/MC377LL/A/apple-remote>
"Not compatible with MacBook Pro with Retina display or iMac (Late 2012)."
There are some USB IR receivers that allow the Apple Reomote to work with software such as Remote Buddy
<http://www.iospirit.com/products/remotebuddy/> -
Imac 27-inch 10.9 recovery disk will not start
hello everyone,
I am having boot up problems on my imac 27-inch.
I pressed the power button and press and held the Option key, I chose the
Recovery disk, but the Recovery disk did not start, instead I have the grey Apple logo and it keeps running but will not start.
The imac 27-inch was bought refurbished in late 2010
I also have imac apple care from 2010 never used. First time problem.
On pressing the Option key during startup,
Mach Hard disk and Recovery Disk 10.9 is displayed.
Choosing mac hard disk does not boot up the OS instead I get a big Zero sign with line through it or a big flash question mark sign.
Choosing the Recovery Disk 10.9 does not boot up Disk Utility, instead I get the grey Apple logo.
Please help. Thanks.Your Recovery HD is damaged. You may be able to repair it using Carbon Copy Cloner 3.5.4. Under the Windowm menu select Disk Center. Select your boot volume from the list. Click on the Recovery HD tab then click on the Create a Recovery volume for this disk. Select Mavericks from the dropdown menu labeled "Recovery HD version to be applied." See if that works. If it does not then see Update - Create Lion RecoveryHD Partition Quickly Without Reinstalling | brunerd. Or see Recovery Partition Creator 3.7 – Updated for Mavericks ...
-
Insatalled a WD5000 hd in intel 21" imac 2006 worked fine for a couple of months then tried to switch on and got the Apple logo and spinning wheel. Tried to reset PRAM, starting from DVD and in Target mode - nothing. Will not respond to keyboard. Replaced old drive - no problems. Whats happened?
4 hours by bus to an Apple store.
So Original Drive(O) working Ok. but computer will not start from WD drive by usb. Got a 3.5 external case and checked WD drive using Disk Utility. After about a minute Disk Utility stops & says "disk needs repairing". Repair disk and Utility says "Ok". Run a check again and "OK" Try to start computer from WD with usb but no good so run Disc Utility again and it stops and says "disc needs repairing". Went through this process 4 times, same result.
If I try to start computer with WD pluged in by usb it will not start. I must disconnect and then it is Ok.
Got a Seagate(S) drive & copied WD using "Restore" then tried to start computer with S drive over usb. Same result as with WD, disk needs repair etc.
Don't know what I did but computer will not start from O drive now so no computer.
Drive WD & O show up Ok on a Macbookso they seem to be Ok.
HELP. -
Tomcat service will not start with JRockit 8.0
We are trying to use JRockit with Tomcat 4.0.1. It runs great as a console app
but when we try to run it as a service it will not start. Has anyone had any luck
with this.Hi Bob!
You can use the jk_nt_service descibed and downloadble at
http://members.ozemail.com.au/~lampante/howto/tomcat/iisnt/
To make this work on JRockit you have to follow these instrcutions.
But also do this:
Make sure that you environment variables are set up correctly. Make sure
that
you have set your JAVA_HOME environment variable correctly, and that that
"%JAVA_HOME%\bin" is available in your PATH environment variable before any
other directory where any version of java.exe may exist. When running
applications as Windows services it is crucial that you set these
environment
variables system wide. To do this open
Start->Settings->Control Panel->System
and select the Advanced tab. Click on the "Environment Variables." button.
To
set system wide environment variables you must edit in the lower part of
this
dialog, i.e. the part called System variables.
When using jk_nt_service the Tomcat startup is defined in
%CATALINA_HOME%\conf\jk\wrapper.properties
Make sure that you set the three properties wrapper.tomcat_home,
wrapper.java_home and wrapper.cmd_line are set accordingly.
wrapper.tomcat_home must be set with the installation directory of tomcat
wrapper.java_home must be set to the same value as the JAVA_HOME environment
variable.
The property wrapper.cmd_line defines the startup command.
At the time of writing, this property should be set to
wrapper.cmd_line=$(wrapper.javabin) -Xnohup
-Djava.security.policy=="$(wrapper.tomcat_policy)"
-Dtomcat.home="$(wrapper.tomcat_home)" -classpath $(wrapper.class_path)
$(wrapper.startup_class) -config $(wrapper.server_xml) start
for JRockit. Normally this command includes a non-standard option to stop
the
JVM from shutting down the process when a user logs off. For JRockit this
non-standard option is -Xnohup, for the Sun JVM it is -Xrs.
/ Sten
"Bob Siragusa" <[email protected]> wrote in message
news:[email protected]...
Thanks for your reply Sten.
We slightly modified tomcat.exe to install our app as a service.
Really the only changes we made were to the name of the service and weadded a
few application parameters with -D. We still use the same startup andshutdown
hooks to the Bootstrap jar. This is where we think there may be a
problem.
>>
I am now trying to use SilverEgg Technologies open source Java ServiceWrapper
but have not progressed very far yet.
Bob
"Sten Garmark" <[email protected]> wrote:
Hi Bob!
Are we talking Tomcat controlled by a Windows Service? If so, how are
you
trying to make this happen?
Can you please point me to the documentation of this and the win32
wrapper
service that you are using?
I would like to be able to re-produce your problem.
/ Sten
"Bob Siragusa" <[email protected]> wrote in message
news:[email protected]...
We are trying to use JRockit with Tomcat 4.0.1. It runs great as aconsole
app
but when we try to run it as a service it will not start. Has anyonehad
any luck
with this.
Maybe you are looking for
-
Safari 6.0.5 Mac won't "SAVE IMAGE AS" jpegs from web pages
Hi. Trying to figure out what has changed here. In the past, when I've located a specific graphic on a web page - say, a .png or .jpg file through a Google image search in Safari - I could right click and choose "SAVE IMAGE AS" and download the image
-
Can't download the latest update for iTunes
Hi, I tried to download the sofware update for itunes 10.6.3 for my MacBook Pro, but as soon as the download begins, it stops and I get an error message saying: "The update 'iTunes' can't be installed", and also "The update could not be verified..."
-
I had my ipod touch and iphone synced to itunes on my PC and basically managed my photos and music, etc. from there. However recently my computer died and I am considering replacing it with an ipad eventually. Can I still add stuff onto my two devi
-
Hello, How would I click on one of the circles I've created and move them using the arrow keys. The circles move just fine with the drag of the mouse but now I want to use the arrow keys. Can somebody help me please? I would really appreciate the ass
-
My iCal alarm works except there is no sound. Just the alarm window with a pulsating alarm clock. Any suggestions? Thanks