External Storage - Read only

Hey all,
I am a Mac newbie and I connected two external storage devices - one via USB and another through Firewire (though I personally do not think this matters, right?)
The one via USB works fine; however, the other storage shows under permissions as "Read only".
Any advice on how I could change the settings?
Thanks in advance.
Cheers,
Mustan

Painful yes, but not impossible!
Sence your Mac can read that format you can move your Photo's, Music and most of your other files to the Mac. Besure to test anything you move to the Mac befor reformatting the HD.
The other option is backup to the PC and then network you files to the Mac from the windows PC.
Sharing files between a Windows XP PC and a Mac running OS 10.4.x
If you are going to use the Ext. HD in both worlds have a look at this article:
Sharing drives
Dennis

Similar Messages

External Harddisk read only after the system hand during I copy some folders to my external drive.

I'm using macbook pro mid 2010.
I could not write my external HDD 1TB (WD) after I copying the folder from local folder to external folder via my parallel desktop.
During the copying, the system hang halfway and no choice i terminate the copy. SInce that, i could not write my HDD either from OSX or via parallel desktop.
When i check the infer, the HDD shown read only. I truing to use the disk utility to verify the disk but I could not click on the button.
Appreciate someone could advice me beside backup and reformat the HDD.
Thank you!

I've got the same problem here with a Seagate external HD. I've been able to install Leopard on another Western Digital HD and boot from it to copy some files to a newly purchased external, but in Leopard I can't copy my 180GB music library because of several errors. It either says that the file names cannot be copied because they are too similar to another file name (accidental dupes in the library) or that the names are too long to be copied and neither make any sense. I'm trying to figure out how to move all of my music over without having to go through it file by file and without losing anything.
I was able to easily copy all other information from the hard drive; the music is the last remaining item I need before I reformat the external and use it in Snow Leopard as a TM backup drive.

FireWire External Drive - Read Only Filesystem

I have a strange issue that I have not been able to resolve. I have an external hard drive connected to my iMac that has a read only file system. I have used it for years without issue. It switched to read only just recently.
Here are the details:
27-inch, Mid 2011 iMac
Processor 2.7 GHz Intel Core i5
Memory 12 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6770M 512 MB
Software OS X 10.8.4 (12E55)
The drive in question:
Mount Point : /Volumes/DATA
Capacity : 2 TB (2,000,054,960,128 Bytes)
Format : Mac OS Extended
Available : 450.83 GB (450,826,641,408 Bytes)
Owners Enabled : No
Used : 1.55 TB (1,549,228,318,720 Bytes)
Number of Folders : 15,989
Number of Files : 84,118
As you can see, everything is set to Read & Write. However when I try to remove a file, I get:
$ rm -f test.file
rm: test.file: Read-only file system
If I try to write a file I get:
$ touch test.file
touch: test.file: Read-only file system
I have run the First Aid utilities and everything checks out OK:
The volume DATA appears to be OK.
Rebooting does not fix the issue either. After searching here and the interwebs, I haven't found a solution. Only references to FAT/NTFS formatted drives.
Is there anything else I can do that I missed?

Thank you Linc & MrJavaDeveloper!
I'm not throwing these suggestions out the window, but they would also be exhiiting some other symptoms too. With indexing issues, it shouldn't impact the inode or anything dealing with the filesystem.
The good thing is that the data is all still good and is readable.
First Aid is still the name of the tab in Disk Utility :-)
Regardless, I got impatient and I didn't have a spare drive to copy the data off of it so that I can rebuild this drive. So I nuked it and recreated the partition. Now I have to wait a couple of weeks for my restore from CrashPlan to finish :-P.

External hd read only after snow leopard

Hi, I installed snow leopard and it's running fine, but now my permissions for my external drives (mac formatted) are now read-only. It wont let me change the permission, or change owner, even when I go through root account (regular account is an admin). I already repaired permissions on my mac hd in a vain attempt to see if that would help, but it didn't.
I then tried the chmod command in terminal
sudo chmod -R u+rwX /Volumes/"myexternaldrivename"
but all i get is this for every file on the drive.
chmod: Unable to change file mode on /Volumes/Aaron's Big External/music/iTunes/iTunes Music/Disturbed/Ten Thousand Fists (Bonus Video Version)/Video - Stricken.mp4: Permission denied
Any suggestions?

I've got the same problem here with a Seagate external HD. I've been able to install Leopard on another Western Digital HD and boot from it to copy some files to a newly purchased external, but in Leopard I can't copy my 180GB music library because of several errors. It either says that the file names cannot be copied because they are too similar to another file name (accidental dupes in the library) or that the names are too long to be copied and neither make any sense. I'm trying to figure out how to move all of my music over without having to go through it file by file and without losing anything.
I was able to easily copy all other information from the hard drive; the music is the last remaining item I need before I reformat the external and use it in Snow Leopard as a TM backup drive.

Automatic make external hdds read-only

I want to reach, that every Storage-Device, which gets connected to the computer, is automatically read-only.
In Windows Server 2008 there was an registry hack (StorageDevicePolicies -> WriteProtect) , but in Windows Server 2012 this doesnt work any more.
So what is a suitable alternative?
PS: Not only users must not write on the hard drive, also windows self should not change the Data on the hdd.
Thank you

Hi,
You may need a third party tool like forensic disk controller to achieve your goal:
Forensic disk controller
http://en.wikipedia.org/wiki/Forensic_disk_controller
Please Note: The third-party products discussed here are manufactured by companies that are independent of Microsoft. We make no warranty, implied or otherwise, regarding these products' performance or reliability.
Best Regards,
Amy

Time Machine Turns External Drive Read Only

Folks--
I went away on vacation in December 2010 and shut my mac osx 10.5.8 desktop computer off, and with it my lacie 1T external drive, partitioned into three volumes, one of which served as my Time Machine backup volume. When I returned from vacation in early January 2011, Time Machine said that the volume in question was no longer available. Somehow it had become "read only." When I tried to fix it using Disk Utility I was unable to even verify it. When I tried to copy the files from the volume to another drive so that I could reformat, I received error message 1426. I'm feeling a little stuck. It seems like the only option is to reformat the entire drive and lose all of the back ups (the other two volumes have older backups).
Any suggestions?
Thanks.

nicx wrote:
Is it really corrupted? I can still access all the data on the volume, I just can't copy it or get the volume out of the read-only status.
Yes. If OSX marked it "read-only," it's corrupted.
Time Machine backups are intricately linked together; anything corrupted means the whole set is suspect. You may be able to restore some things, you might even be able to do a full system restore from some backups; but somewhere, something is corrupted. OSX knows that, and won't let you resume backing-up to corrupted backups, or copy them (even if you could copy them, the copy would be corrupted, too).

External drive - READ ONLY

What's with the hard drives customers buy from the apple stores?
I have had this hard drive for a few weeks now and after reformatting the drive 5 times and coped a few items to the drive a few days latter it says read only you cant copy to this drive WHAT THE F#%$
Please help with this on going FULT with apple and its products..
(using a iMac with a Porsche design)

Use the Disk Utility in the /Applications/Utilities/ folder to reformat it to MS-DOS if you need to use it with a PC, or Mac OS Extended otherwise; if for some reason you don't want to or can't erase the drive, install Paragon NTFS or MacFUSE onto Mac OS X.
(27993)

External Volume read only on Mac OS X server 10.5

My mac OS X Server 10.5.8 is having a FC volume is read only ,
What could br the issue ??

Same issue here. I even tried to import the cert directly into keychain. I did get the certificate to show up in server admin with the correct signed info, but when I assigned a service to the cert. It actually was handing out the old unsigned cert, so I removed it to try again. Now I cannot get the cert back in server admin at all, just in Keychain under SYSTEM. The self-signed certs only show up under My Keychains... It appears also that Server Admin will only see the certs that are located in MyKeychains. Anyone have any luck?

External harddrive read only

I have an iMac and am running Lion. I have an external harddrive which I've had for months. It's worked fine (uploading files to it and deleting files from it). But suddenly I can't do that. I've checked the Info (which tells me under "Sharing and Permissions", "You can only read"). But there is no place in the Info panel for me to change this.
To my knowledge I did nothing to make this happen. How can I change this so I can once again upload to and delete from my external harddrive?
Regards, Bongani

For what do you use this drive? If it is a data-only drive (e.g., you just use it for iTunes) you can set it to ignore ownership on the volume which I find a lot more convenient than having to mess with permissions.
I use Tiger OS. When I get Info on a drive there is also a "Details" button under the ownership and permissions area where I can adjust things.
https://discussions.apple.com/thread/2443558
Trouble adding music to iTunes library or importing audio CD - http://support.apple.com/kb/ts1387

External drives read only problem

iam a new mac user. i have 2 external drives formatted to ntfs that can only read. They are too large to transfer files to the mac to reformat to fat32. Any workaround suggestions?

yopadima wrote:
iam a new mac user. i have 2 external drives formatted to ntfs that can only read. They are too large to transfer files to the mac to reformat to fat32. Any workaround suggestions?
You can install NTFS3G, this will allow you to write to an NTFS drive

How to use AirPort Time Capsule 2TB as an external storage hard drive only?

I have a new AirPort Time Capsule 3TB, now I want to use my AirPort Time Capsule 2TB as an external storage hard drive only, how do I it?
I would like to connect the AirPort Time Capsule 2TB directly to my Mac Pro. using OS X 10.7.5.
I have erase disk and reset the 2TB to factory default, after that, I cannot make it to connect to my Mac. Please help.

The 2TB Time Capsule needs to connect to your 3TB Time Capsule using a wired Ethernet connection.
Connect from a LAN <--> port on the 3 TB Time Capsule to the WAN "O" port on the 2 TB Time Capsule and configure the 2TB Time Capsule in Bridge Mode and turn off the wireless function on the device as well.
Once that is done, you can connect your Mac directly to the 2TB Time Capsule using another Ethernet cable, or your Mac can connect to the network using the normal wireless network, if you prefer.

My external hard drive is in Read Only mode...

My external hard drive, which I have used before, is in "Read Only Mode."
I have put files on this drive and taken files off of it before, so it isn't an NTFS issue.
I am still able to write with a different Mac.
FYI, this is a Late-2011 Macbook Air.

You are about to format your storage device. Be sure to copy and take the back up before formatting. Just select the physical disc you want to reformat in the tree on the left-hand side of Disk Utility. You can select a new file system format from the drop down below, and also name the new volume to be created. Showing the info of the newly formatted drive, you can see the disc is now set to read and write.

External hard drives suddenly changed to read only

Three of my external hard drives suddenly changed to read only. These hard drives have been working on my macbook pro for months. When I click on get info 'read only' shows up and there is no lock icon nor is there a window that shows name | permissions, also in disk utility the 'verify disk premissions', 'verify disk', 'repair disk', and 'repair disk premissions' buttons are ghosted and I can not select them. I have not made any changes to my computer and I have read many other posts and have not been able to find a solution.

About a hundred times with no luck. Some of my research is leading to Western Digital, there may be a problem with the drives' 'smartware' software. I've been using this drive for months and I never used the 'smartware', but I tried it anyway with no luck. I just remembered that four days ago I had this drive plugged this drive into an Iomega wireless storage device and it seemed to work fine. Now the wireless storage device can't find the drive at all. I just need to know if there is a way I can change the permissions back to read/write, otherwise I will have to buy another drive and transfer all the data to the new drive and re-formatt the wd drive.

External hard drive becomes "read only" and won't let Time Machine back up

I have an external hard drive for back up, and it has been working fine until recently.
There is a version of 10.6.6 loaded on it also.
The back up will fail every few days. When I do some checking, the back up drive is "read only" but I am not able to switch it to read/write. I cannot repair it with Disk Utility as the repair buttons are grayed out.
I can run DiskWarrior and it will fix it, but it runs super slow and takes all the memory to do it. I can barely use my e mail while it's running.
Anyone know what's going on?

System log says:
3/27/11 8:01:19 AM com.apple.backupd-auto[1559] Not starting scheduled Time Machine backup - time machine destination not resolvable.
It's read only because:
A: I cannot do repairs under Disk Utility, the buttons are grayed out.
B: I right click and "Get Info" and if I click on the lock icon, nothing happens.
C: The disk is not listed in the Time Machine backups.
I will try to take better notes the next time it happens and give you the exact messages.
There is another drive daisy chained to this external drive which holds my music. The music drive does not have a Mac OS installed on it and is only for storage. It works properly.

External usb hard drive - read only

I connected an external hard drive to my macbook in hopes I would be able to use it for storage. I shows up and I can parse through all the files. When I try to add a file to a folder, it doesnt let me. Its says READ ONLY. I have never set any permissions. Any help on how I can fix this issue?

Select the drive on your desktop and hit command+i. This brings up an information panel.
At the bottom, click the lock and enter an admin username and password. Then, click the plus sign, choose the username you want to give read/write access to and select read/write. Then click the gear icon and select "Apply to enclosed items."
Cheers.

External Storage - Read only

Similar Messages

Maybe you are looking for