External Storage recommended for use with FCPX

Hi everyone,
I want to improve FCPX performance and work with my events and projects on one or two external HDDs.
I am an amateur editor and mostly work with 720p, 120 fps, h.264 optimized to ProRes 422 footage on mostly single camera projects.
Can anyone recommend a portable product that will work for my purposes? Preferably one that I don't have to spend $1000+ on (like drobo or promise).
Is an external USB3 Drive powerful enough? Do I need thunderbolt?
Thanks so much for your answers and help!
Mike
P.s. Working with a MBP 15" Retina, 2,6 GHz i7, 16GB RAM, 750GB SSD.

120fps? What camera did this media come from?
FW800 minimum, Thunderbolt is best. You're budget will determine your limits. Will USB 3.0 be enough? It all depends on what format you're editing. If you transcode everything to ProRes, just about anything will work. Firewire 800 will work, unless you're doing a lot of compositing and/or very long projects.
Get the format you can afford. Be sure spinning disk drives (your price range) are 7200rpm! Vital!
Minimum would be FW800, next up would be USB 3.0, next up would be Thunderbolt, as far as speed. Avoid SSD drives as you'll not get much storage space for the amount you sound like you have to spend.

Similar Messages

Can someone suggest an affordable external hard drive for use with FCPX and video editing on my Macbook Pro Retina

I have a Macbook Pro Retina from 2012 and I only got the 250GB hard drive. I'm getting ready to purchase a Panosonic HC-X920 to use with Final Cut Pro X already installed on my laptop. Since I know the file sizes are going to be so big, can anyone suggest an affordable external drive fast enough to keep up with editing the video? I'm not a pro and use it for family and personal projects.
I prefer some thunderbolt options since I haven't had a chance to use the inputs since I got my macbook pro. I just don't know what is necessarily too little or too big and too cheap and too expensive for my needs. Thank you.

OWC is a Mac specialist and a very trustworthy vendor. I have dealt with them and their technical stall on many occasions. Hence you may look at what they offer and be assured that they will stand behind what they sell:
http://eshop.macsales.com/shop/Thunderbolt/
I suspect that for your needs, a 1 TB drive is going to be the minimum.
Ciao.

Monitor Recommendations for Use with Captivate

Anyone have any monitor recommendations for use with Captivate? Size and resolution?

The formal adobe recommendation is as posted 1024x768 is fine.
But, monitors are not that expensive, so for productivity and better work environment I recommend at least one wide screen 22" with resolution 1600X1200 or more and that supports 1080 for video.
You need the wide screen ( or two monitors) so you can work with all the tools in one view.

Which fft filter do you recommend for use with Photoshop CS4?

Looking around the internet, I am having trouble finding an FFT filter that I can download and that is recommended for use with CS4. Any have any help?

Thanks much, but when I click on the link
<http://www.mdr.co.nz/Fourier%20Transformation.zip>
http://www.mdr.co.nz/Fourier%20Transformation.zip, it leads to a Not Found
page.
Monelle M. Richmond
Administrative Manager
jubilee! / Me Beads!
One More Thing, Inc.
165 Hollow Road
Glenford, NY 12433
Tel: (845) 657.5290
Fax: (845) 657.5294
<mailto:[email protected]> [email protected]
www.jubileejewelry.com

What is the best software to use for screen capture on a PC for use with FCPX?

What is the best software to use for screen capture on a PC (windows 7) for use with FCPX? I've tried Camtasia and camstudio however the avi files cannot be imported by FCPX and the mov files produced by these programs are shown as just black screens in FCPX.

I use to face this issue every now and then (as a freelancer) when I use to cut on FCP7.
if the material is DV and was captured using Sony VEGAS, Premiere or Edius, the footage generally worked fine. You'll find most people will tell you to convert it regardless, however I found no issues working with them.
A problem you'll definitely face is HDV material. Most PC editing software write HDV in their own codec, which can't be read in FCP.
The only thing I can think of is to try converting HDV meaterial to QuickTime using something like MPEG Streamclip, or something similar.
Good luck

Partitioning an External 320gb drive for use with Time Machine and...

I want to be able to use my Western Digital 320GB external drive for use with Time Machine and to use as extra storage space on both my Mac and when I boot into Windows Vista.
Is this possible?
I was playing around in Disk Utility and would I partition the part I want to use for Time Machine with the Mac OS Journaled, and whatever I want as space for windows, use a MS - DOS format?
Has anyone done this before?
Cheers-

Unless you are using 64 bit version of MSWindows (64 bit XP/Vista), it won't be able to handle a disk with GUID partition table (GPT). Disks with Apple Partition Map (APM) or GUID partition table are the only ones that Time Machine will work with (not MBR disks). Note also that the MBR/APM/GPT are at the DISK level and not the partition level, so don't mix the format with partitioning scheme. Time Machine disks are meant to live in the Mac universe (for now, anyway) and sharing with the MSWindows 32-bit universe is not possible.
See http://img87.imageshack.us/my.php?image=macpcdiskdd06sv8.png for some additional background.

USB external portable HD for use with FCE and MBP ???????

I've seen a 120 GB USB portable external Seagate HD for $117. Would this be usable as a scratch disk for use with my MBP 2.0 and final cut express HD 3.5. Are there problems with using USB externals? FW external hd's seem to be a good deal more expensive.
Thanks.
Maurice

I bought one recently very cheaply to use for general storage.
I found that FCE 3.0 worked perfectly and have been using it ever since instead of my FW HD.
HOWEVER, before you dash out and buy one take note that I have only been tinkering around and experimenting with comparatively short projects of no importance.
I strongly suspect that if I made a long and complicated film I might suffer - so pay the extra and get a FW HD !
Incidentally for normal storage purposes the USB2 HD takes over twice the time to move files back and forth. So even for non-FCE use the Firewire HD is twice as fast.
Ian.

External Touch Screen for use with x220 running Tablet PC for XP

I've been tasked to purchase an external touch monitor for use the the x220 running Tablet PC for XP but the monitor specs typically show "Windows Vista/Win7" supported. Will any touch monitor correctly work with this OS? Any recommendations?

Hello,
I would imagine you would need to find a touch-enabled screen that has device drivers for Microsoft Windows XP available for it.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Tips on laptop purchase for use with FCPX

Hello
I hope to soon purchase a Mac laptop to use with FCPX. It's been a while, I've always bought MB Pros, but I thought I'd ask what would be the best option and why, and if Mac Air notebooks or the MacBook would do just as well for editing as the MB Pro.
How do Mac Air, MacBook and MB Pro stack up?
Is the Retina Display useful or not for editing? I thought I'd heard negative comments about it for editing.
Do I need a 7200rpm drive?
Is Flash storage the best option?
What graphics card is best?
Should I get the usb super drive? I've always used FW drives.
Is there even a FW port? If not, the adaptor seems mandatory.
What's up with Thunderbolt storage? Better than FW?
Should I be moving away from FW drives?
Where's the best place to buy? I'm looking on Amazon and Ebay.
Anyways, any tips or advice would be much appreciated.
best,
elmer

Advice is to max out as much as you can afford. Sdd, best gpu etc. For simple editits, most machines will work, but when you start using effects, colur correction etc, things will go much faster. Personally i just order a iMac retina with max out specs.

What is a good external hard drive for use with a macbook air?

I am looking at purchasing a macbook air 13". What is a good external hard drive to use with it? Should I look for an external hard drive with its own a/c power or is the usb 3.0 capable of powering the external drive.

Have a look here for the sizes and prices.
It is however, much better to get a USB external drive that comes with it's own power adapter to avoid issues when or if your USB port can't supply enough power to your external drive.
That issue however does happen rarely but it does happen. Especially when connecting other devices to your other USB port while your external hard drive is connected to your other usb port.

Recommend an External Floppy Drive for use with G5 and Leopard?

I need to pull some data off a number of floppy disks I used with my old Mac. Can anyone recommend a brand and/or source. Speed is unimportant. Can use USB.

Any USB floppy will work. Apple store sells Smartdisk.

Format external hard drive for use with macbook pro

I have an old external drive that has been used with a pc.
Now I have formatted the disc on the pc, but seemingly, I need to format it for the MacBook Pro, as well.
How to?
Rgds Jan

Go to disk utility
Format it in Mac OSX extended journaled
Warning-- doing so will erase all data on the drive

Quiet external hard drive for use with Time Machine?

Few questions related to Time Machine:
1- what external hard drive that would be good to use with Time Machine, that also runs relatively quietly? Since TM runs 24/7, am looking for one that is quieter than my current G-tech.
2- Please confirm what size is optimal relative to the size of the internal hard drive.
3- I currently use a separate external hard drive as my bootable disc. Is it possible/preferable to have these be on one and the same drive?
Thank you.

1. I like these (have three of them) - literally whisper quiet:
http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
2. You should allow 2 - 3 times your internal drive's size for TM.
3. No, it'd be best to be on another drive - you can create separate partitions, but if/when the drive fails, both of your backups would be gone. So, keep your clone on a separate disk. In fact, it's good to have two different backups.

Need tablet recommendation for use with CS6 and a Mac Mini

Hello all,
I'm running CS6 on a Mac MIni with OS X 10.8.3. I want to start learning graphic design entry on Illustrator and Photoshop and all I've read indicates use of a tablet is de rigueur. Can anyone recommend a medium to top-end tablet that is compatible with the Mac Mini and CS6? Apple's site only shows the Wacom Bamboo Splash tablet but doesn't give any hint whether it would work with the Adobe tools.
Thanks,
Kevin H.

Actually it depends on how you like to work and what exactly you're after.
Illustrator can be used with a mouse only when you do just construction work, like using the shape tools, the pen tool, pathfinder functions, transformations and all those other tools that serve the need for exact results.
In case you'd like to draw stuff intuitively like doing water color, calligraphy, sketching then you would definitely need a tablet.
A tablet can also replace a mouse in case you want to reduce a strain on your hand, arm and fingers. Some people prefer styluses in this case.
Is any of these the case for you?

External hard disk for use with quicksilver 2002 and intel imac 24"

i am wanting to purchase an external hard disk to be used with both a g4 and an intel imac 24".
i am considering a seagate barracuda 500gb or 750gb and purchasing an external case separately.
interfaces - usb2, firewire 400 and 800.
Do I need a case with the "oxford chipset" to have it work.
Are all seagates compatible these days.
I was looking at a ultra ata100 hard disk. Will this disk connect automatically to the enclosure or will additional cables be required
Is the Ice Cube Generation II Ide enclosure ok to use.
Appreciate any help given
dual 1 gig G4, Intel 24" Imac Mac OS X (10.4.8)

Hi-
The Ice Cube uses an Oxford chipset, (part of the external housings onboard controller) so it should be fine. The Oxford chipset has been shown to give the best compatibility and performance, thus being an desirable feature.
http://www.pccasegear.com/prod2307.htm
Using a Seagate Ultra ATA 100 drive should give you good, quiet, reliable service. There are no problems with the Seagate ATA drives.
Using the drive and housing with firewire will give you the best results, and firewire will allow you to use a bootable backup on the external drive, should the need be.
The housing comes with all the necessary cables to connect and use your external drive.
Insert the hard drive into the housing, connect the power and the firewire, format the hard drive, and you are ready to go..........
G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, 300gbSATA+160gb HD, ATI Radeon 9800 Mac OS X (10.4.8) Pioneer DVR-109, LaCie 160gb, 23"Cinema Display, Ratoc USB2.0, Nikon Coolscan

External Storage recommended for use with FCPX

Similar Messages

Maybe you are looking for