External SWF or internal symbol for movie clips

I'm creating a Flash interactive thing which is basically a couple minute animated intro and then a menu of products to choose from. You click on one of 12 products and get a little animation about how it works. So my question is where to put these 12 product animations? I was originally thinking to just put them in the main timeline and just jump to them with labels but I'm thinking that the timeline is going to get too hairy, it's already got a lot. Now I'm wondering what the best approach should be. Should I produce 12 external SWF movies to be loaded when clicked on, or should I just make each product animation an internal movie symbol and just add an instance from the library to my main timeline? Or is there any other approach that might be better for some reason?
Thanks,
~peter

yes, as i mentioned, guidelines can be given:
1. loaded objects won't display as quickly (unless they're preloaded) as embedded objects. they must load before they can be displayed
2. using loaded objects decreases the size of the main swf (and therefore decreases the main swf's load time) when compared with embedding objects in swfs.
and, as for loading vs embedding swfs, the above still applies. but there's one over-riding factor when considering swfs:
3. embedded swfs have their actionscript, if any is present, disabled. so, almost always, you load, not embed swfs.

Similar Messages

Check for movie clips with AS?

Is it possible to check if a frame contain a movie clip with
AS, and then if movie clip is found run a function? Like a global
"event handler " for movie clips.

I want a function that automaticly can detect and fade in any
movie clip found in any keyframe in the main timeline. So i don't
have to make
In the first keyframe in the main timeline
on (ohh here i found a movie clip)
//let's run a nice fade function on that movie clip
mx.transitions.TransitionManager.start
(eval(TheClip),
{type:mx.transitions.Fade,
direction:0,
duration:1,
easing:mx.transitions.easing.None.easeNone,
param1:empty,
param2:empty
Something like that

RemoveChild for movie clip that was added in another function?

Hello everyone. I have 3 different functions for my preloader. I have an Event.OPEN, ProgressEvent.PROGRESS, and an Event.COMPLETE. In the event.OPEN function, I create a new variable that is data typed to the class name of my preloader that I set in it's property dialogue box. This is just a simple circle animation. Below is my code for it:
function addPreloader(event:Event):void
    var myPreloader:mcPreloader = new mcPreloader();
    myPreloader.x = stage.stageWidth / 2;
    myPreloader.y = stage.stageHeight / 2;
    myPreloader.width = 75;
    myPreloader.height = 75;
    addChild(myPreloader);
My ProgressEvent.PROGRESS function looks like so:
function preloadImages(event:ProgressEvent):void
    var percent:Number = Math.round(event.bytesLoaded / event.bytesTotal * 100);
    percent_txt.text = percent + "%";
and my Event.COMPLETE function looks like so:
function imageLoaded(event:Event):void
    var myLoadedImage:Loader = Loader(event.target.loader);
    addChild(myLoadedImage);
    new Tween(myLoadedImage, "alpha", Strong.easeIn, 0, 1, 0.5, true);
    event.target.loader.removeEventListener(Event.OPEN, addPreloader);
    event.target.loader.removeEventListener(ProgressEvent.PROGRESS, preloadImages);
    event.target.loader.removeEventListener(Event.COMPLETE, imageLoaded);
The only problem is that when it's done loading, I'd like to remove the myPreloader from the stage. Since it is declared in the Event.OPEN function, I can't communicate with it via my Event.COMPLETE function. How can I successfully remove it from the stage after it's done loading? Thanks!
Jesse

Duh, thanks Kglad. It's been a long week ;).
Jesse
Date: Thu, 9 Jun 2011 13:47:57 -0600
From: [email protected]
To: [email protected]
Subject: removeChild for movie clip that was added in another function?
var myPreloader:mcPreloader
function addPreloader(event:Event):void
   myPreloader = new mcPreloader();
    myPreloader.x = stage.stageWidth / 2;
    myPreloader.y = stage.stageHeight / 2;
    myPreloader.width = 75;
    myPreloader.height = 75;
    addChild(myPreloader);
My ProgressEvent.PROGRESS function looks like so:
function preloadImages(event:ProgressEvent):void
    var percent:Number = Math.round(event.bytesLoaded / event.bytesTotal * 100);
    percent_txt.text = percent + "%";
and my Event.COMPLETE function looks like so:
function imageLoaded(event:Event):void
removeChild(myPreloader);
myPreloader=null;
    var myLoadedImage:Loader = Loader(event.target.loader);
    addChild(myLoadedImage);
    new Tween(myLoadedImage, "alpha", Strong.easeIn, 0, 1, 0.5, true);
    event.target.loader.removeEventListener(Event.OPEN, addPreloader);
    event.target.loader.removeEventListener(ProgressEvent.PROGRESS, preloadImages);
    event.target.loader.removeEventListener(Event.COMPLETE, imageLoaded);
>

Bitmap Font gets blurry when its swf is loaded into a movie clip

I have a gallery i'm working on, located here:
http://www.stationarynotes.com/portfolio/Gallery.html
If you click the first button (the one that looks like a
splattered "S" in black ink) you'll see that my bitmap text gets
rendered all blurry. That swf which is being loaded renders fine
when I test it by itself. The text is positioned with whole numbers
and aligns to the grid within its own swf, and the movie clip which
receives it is also positioned with whole numbers. Do you think
perhaps when it is loaded into another MC it is being pushed off of
the grid somehow...? I'm really confused.
I can post my .flas if that'll help.

bitmap fonts look best when positioned on a whole pixel
number (100.0 instead of 100.4 for example).
If you are loading into an empty clip - try placing that clip
on the nearest whole number. or you
could load the external swf to a level with will position it
at 0,0 (upper left corner of stage).
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
Scruffpuff wrote:
> I have a gallery i'm working on, located here:
>
http://www.stationarynotes.com/portfolio/Gallery.html
>
> If you click the first button (the one that looks like a
splattered "S" in
> black ink) you'll see that my bitmap text gets rendered
all blurry. That swf
> which is being loaded renders fine when I test it by
itself. The text is
> positioned with whole numbers and aligns to the grid
within its own swf, and
> the movie clip which receives it is also positioned with
whole numbers. Do you
> think perhaps when it is loaded into another MC it is
being pushed off of the
> grid somehow...? I'm really confused.
>
> I can post my .flas if that'll help.
>

Can you create a "constructor" for movie clips?

What I'm doing:
var this_array[counter] = new monster; //monster is a movie clip
init_monster(); //set's things like .name, .x, .y, etc.
What I want to do:
var this_array[counter] = new monster();
When I add a "monster" I then call a function to "initialize" all of it's stats.
Is there a way in the creation of the object, like with a constructor, where it automatilly does it on 1 line?
I'm teaching myself and am a little stuck on this part. If I have to create a "monster class" to do what I want just say so.
Any simple examples or links to simple examples would be great. Thanks in advance.

Ok so I've made a class Monster, and I have my movie object Red_Monster
How would I go about creating the variable so it knows it's both?
The only thing I can think of is linking them together as a .variable of the other.
Example:
var this_monster[x] = new Red_Monster();
this_monster[x].stats = new Monster();
It just seems a bit slopy, it would be nice to have this_monster know it's both. Is there a way to do that?
(added)
I've gotten Monster to extend MovieClip, and this is working to use it as a movieclip.
Currently trying to change the image of the movie clip in code to Red_Monster. Is there a way to do that?
(added)
Found how to do it, sort of. Change the class linkage name to Monster instead of Red_Monster. I just have to make classes for each movie clip.
(last add, answer for anyone else)
Ok the answer is to create a Monster class that extends MovieClip. Then for each color_Monster they all extend Monster, no other code needed inside each class other then the constructor.

How do I View Guides for Movie Clips in Relation to Entire Scene?

My boss purchased a flash animation from a company a few months ago that she now needs me to fix. The goal is to resize the animation to different dimensions for a new banner. I took the original file, brought up the document settings, and changed the size to the new one we need, and hit the "scale content" checkbox. The file I have after doing this is shown below; I have highlighted the shape I will be talking about in pink. Nothing is the correct size now so I am trying to resize them to fit the stage area. I am having trouble with the green shape that is highlighted Pink.
The person who originally made this file made that highlighted shape into a movie clip and then dropped it in to the main timeline. I was wondering if there was a way that I could see where that shape is in relation to the area of the entire stage and the other objects in the main timeline? Meaning if I am inside of the greenblock movie clip all I see is what is below:
With this view I cannot tell where that shape is in relation to everything else. I am hoping someone can tell me how to view the guides from my main file inside of this movie clip( I already have guides turned on), or any other way of seeing what size and where my shape is in relation to rest of the objects on the stage of my main file. I would take any option that would let me tweak the green shape inside of the movie clip and see in real time how it looks in relation to the rest of the items on the stage as I make changes.
Any suggestions on how to get perspective on where my movie clip is in relation to the stage and other objects on it would be greatly appreciated.
Sincerely,
Tissal

Somehow double clicking on your system seems to be connected to the command
fl.getDocumentDOM().enterEditMode('');//the view where you don`t see the rest of your stage
whereas normally it defaults to
fl.getDocumentDOM().enterEditMode('inPlace'); //the view where you can see everything els on stge alphablended
you can either create a shortcut to
edit>edit in place or alter the standard behaviour of your double click
or right click(Windows) or ctrl-click(MAc) the mc and choose Edit in Place

Formats for movie clip used in PSE 4 slide show

Still finding it difficult to find documentation of what formats are supported for using digital camera movie clips in PSE 4 slide show.
The movie file from my Canon camera is 640 x 480, 30 fps Motion JPEG and has a .AVI extension. I am able to use it "as is" in a PSE 4 slide show. However, sometimes I need to trim the movie clip in Windows Movie Maker 2 in order to keep only the best part.
My question is what parameters can I specify to save my movie clip in Movie Maker 2 so that I can use it as a movie clip in a Photoshop Elements 4 slide show that will be saved as a WMV file?
Barb O

Karin Sue,
>Also, are the projects saved in a folder somewhere, or only as part of the Catalog?"
The definition of the "project", which is the "Creation" in Organizer terms is saved only in the Catalog.
>If you publish your creation as a pdf or wmv they are saved in the folder you designate. Once published, I don't believe there is any way to edit. If you save the creation, you can go back and edit and republish if you like.
Yes, the WMV or PDF file is saved in the folder that you designate. You are correct that if you save the Creation, you can go back and re-edit. When you Save the Creation gets a thumbnail within the Organizer photo well and you can click on the thumbnail to go back in to the Creation process make modifications and save a new WMV or PDF file.
Note: that the Save window documents that the PDF choice does not support some options such as Pan and zoom, videos, and certain transitiions.
Barb O

Creating functions for movie-clips(serious problem)

Hello,
This is I think my third thread on these forums and in my
previous threads I had always got some help.Well, now I have
another serious problem, can you help me?
I am unable to create a function that can control movie
clips. Let me explain:-
I have 10 movie clips on the stage and I have assigned them
that whenever they crash to an object, they will go to a random
position. Writing this code ten times for each movie clip would be
very tedious, so, I thought about creating a function, but, it
doesn't work. Here's the function, can you correct it?
var object:movieClip;
function position(object) {
var testnum1:Number;
testnum1 = random(290)+36;
_root.object._y = -77.6;
_root.object._x = testnum1;
position(nameofmovieclip)
PLEASE HELP IS REQUIRED!!!!
Thanking All,
Chinmaya

Thanks for the reply,
I tried that, it worked!
But, now, I am encountering a really odd problem. This time
I'll give you my full code.The problem is, that now when the object
collides with another one, it changes its position according to the
code but then after a while, it just passes through the object.
Here's my code:-
function position(object) {
var testnum1:Number;
testnum1 = random(290)+36;
object._y = -77.6;
object._x = testnum1;
metal.onEnterFrame = function() {
_root.metal._y += speednum;
if (_root.metal.hitTest(_root.testline)) {
position(_root.metal);
speednum = random(6)+1;
Can you help me out again,
Thanks,
Chinmaya
P.S. I have tried to use the function like this:
position(metal), but it doesn't work. And yes, I have already
defines speednum somewhere before, so that isn't the
problem.

Boundary for movie clips following the mouse

here's my AS...
myInterval = setInterval(KBMOglobal,15);
function KBMOglobal () {
KBMOglobal1._x -= (KBMOglobal1._x - _xmouse)/10;
KBMOglobal1._y -= (KBMOglobal1._y - _ymouse)/10-2;
ok, so my movie clip follows the mouse around, with a small
delay and the y axis is slightly lowered. the stage of my movie is
380 x 640. does anyone have any suggestions on how to create a
boundary, equal to the size of my stage, that does not let the
movie clips that follow the mouse extend past? does that even make
any sense? essentially, i would like the movie clips to follow the
mouse, the entire movie clip stay visible on the stage. because of
the positioning of the items on the stage that initiate this
function, i only have to consider the width of each movie clip,
which luckily is a constant = 200. does that make any sense? let me
try this all again....
how do adjust the above function so that the movie clip,
KBMOglobal1 (which has a width of 200) stay within the horizontal
limits of the stage (which is 380)?
thanks for your time and to everyone in this forum that has
been so very helpful with all my questions in this project so far,
yall rock!

quote:
Originally posted by:
NickTheNameless
this is almost working perfectly, however i need to adjust
the boundary of the x axis. for some reason, the movie clip stops
following the mouse when it reaches half way across stage,
horizontally.
would you please be so kind to explain what your script is
doing? because i'm not a total idiot, i realize i could probably
replace 380 with 760 (double the width of the stage) and it would
work as expected. however, if you could spare the time to explain
what the following two lines are doing, step by step....i'll give
you my first born.....
KBMOglobalGeneralCancelDispatch._x<0?KBMOglobalGeneralCancelDispatch._x=0:KBMOglobalGenera lCancelDispatch._x;
KBMOglobalGeneralCancelDispatch._x>380-KBMOglobalGeneralCancelDispatch._width?KBMOglobalG eneralCancelDispatch._x=380-KBMOglobalGeneralCancelDispatch._width:KBMOglobalGeneralCancel Dispatch._x;
thanks again for your time!
do you know ?: operator? it is like if...else... statements,
when we say:
somethingIsTrue ? do1() : do2();
it is exactly same meaning like:
if (somethingIsTrue) {
do1();
} else {
do2();
Now, we look at this line:
KBMOglobalGeneralCancelDispatch._x<0?
KBMOglobalGeneralCancelDispatch._x=0:
KBMOglobalGeneralCancelDispatch._x;
it is same like
if (KBMOglobalGeneralCancelDispatch._x<0) {
KBMOglobalGeneralCancelDispatch._x=0
} else {
KBMOglobalGeneralCancelDispatch._x

Checking files for movie clips

Hi,
Is there a quicker way to do a global search within a large
flash file to see if any movie clips still exist, without having to
open every frame & check ea symbol individually on the timeline
to check in addition to searching the library?
thanks.

use the Movie Explorer.
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
dmc99 wrote:
> Hi,
>
> Is there a quicker way to do a global search within a
large flash file to see
> if any movie clips still exist, without having to open
every frame & check ea
> symbol individually on the timeline to check in addition
to searching the
> library?
>
> thanks.
>

Load and unload the external swf file using AS3(for window, IOS and android)

For the external swf file loading, I use this code
load2.addEventListener(MouseEvent.MOUSE_DOWN, newvid);
function newvid(event:MouseEvent) {
          trace("you clicked me");
          var loadit = new Loader();
          addChild(loadit);
    var _lc:LoaderContext = new LoaderContext(false, ApplicationDomain.currentDomain, null);
    loadit.load(new URLRequest("scene02.swf"), _lc);
its working great but I don’t know how to unload the loaded swf files (looking: unload one by one and unload all)
in AS2 we have
on (release) {
          loadMovieNum("scene2.swf", 1);
          unloadMovieNum(2);
          unloadMovieNum(3);
but i need in AS3

Now I use this code and this time I got these compiler errors
package {
                import flash.display.SimpleButton;
                import flash.display.MovieClip;
                import flash.events.MouseEvent;
                //import flash.display.URLRequest;
                //import flash.display.Loader;
                import flash.events.Event;
                import flash.system.ApplicationDomain;
                import flash.net.URLRequest;
                import flash.system.LoaderContext;
                                public class load1 extends SimpleButton {
                                                var loadit:Loader;
                                                public function load1() {
                                                                this.addEventListener(MouseEvent.MOUSE_DOWN, loadfile);
                                                private function loadfile(event:MouseEvent):void {
                                                                trace("you clicked me");
                                                                loadit = new Loader();
                                                                this.parent.addChild(loadit);
                                                                var _lc:LoaderContext = new LoaderContext(false, ApplicationDomain.currentDomain, null);
                                                                loadit.load(new URLRequest("s01.swf"), _lc);
                                                private function unloadfile(event:MouseEvent):void {
                                                                loadit.unloadAndStop();

How do I create a play button for movie clip using AS3

Hello.
Bit new to this and have been searching the adobe forums and google. I am trying to create a button that will play an imported MovieClip.
I have a movie clip that I've imported into it's own layer (Layer1) Frame 1. I've given the MovieClip an instance name of foundationMovie.
I've created a button and have that on its own layer(Layer2) above layer1, it is also in Frame 1.
I've added a
stop (); action to layer2
The video is not set to autoplay.
I want the video to start playing when the viewer clicks the button. I know I've got to put some kind of event listener using AS3 in my timeline somewhere.
I've found some code and I've been trying to work with it. I'm sure I've mutilated it beyond usability but this is what I've got.
stop ();
player.addEventListener(MouseEvent.CLICK,play);
function play(event:MouseEvent)
gotoAndPlay("foundationMovie");
If someone could point me the right direction or help me with my code I would really appreciate it. Thanks.

First, you need to clear up what you are working with... a movieclip and a video are usually entirely different things.
Next, your code may get you started on your way with some changes. You shouldn't use "play" as a function name due to there already being a play() method/function in Flash.
If the movieclip is a movieclip and has an instance name of "foundationMovie", and your button has an instance name of "player" then the following adjusted code would normally work...
stop ();
player.addEventListener(MouseEvent.CLICK,playMovie);
function playMovie(event:MouseEvent)
foundationMovie.play();

[ISSUE] Load external .swf into an AIR for iOS app

I want to load an external .swf which is included theme objects of the application. The loader class finishes loading but after this when I try to get objects in the swf I get this error.
Device is iPad v.2 iOS v5.1.
ReferenceError: Error #1065: Variable MenuHome is not defined.
    at adaptive.controls.thememanager::ApplyTheme/applyStyle()[D:\ConsumerProductInterface\Consu merProductBusiness\src\adaptive\controls\thememanager\ApplyTheme.as:41]
    at adaptive.controls.thememanager::ApplyTheme/apply()[D:\ConsumerProductInterface\ConsumerPr oductBusiness\src\adaptive\controls\thememanager\ApplyTheme.as:54]
    at adaptive.controls.thememanager::ThemeManagerSystem/checkIfAllLoaded()[D:\ConsumerProductI nterface\ConsumerProductBusiness\src\adaptive\controls\thememanager\ThemeManagerSystem.as: 139]
    at adaptive.controls.thememanager::ThemeManagerSystem/backgroundImageLoadHandler()[D:\Consum erProductInterface\ConsumerProductBusiness\src\adaptive\controls\thememanager\ThemeManager System.as:119]
    at adaptive.controls.thememanager::ThemeManagerSystem/backgroundImageLoadHandler()
    at flash.events::EventDispatcher/dispatchEvent()
    at adaptive.controls.thememanager::ThemeManagerImageLoader/loadImageCompleteHandler()[D:\Con sumerProductInterface\ConsumerProductBusiness\src\adaptive\controls\thememanager\ThemeMana gerImageLoader.as:60]
    at adaptive.controls.thememanager::ThemeManagerImageLoader/loadImageCompleteHandler()
    at flash.events::EventDispatcher/dispatchEvent()
    at adaptive.controls.imageloader::ImageLoader/imageCompleteHandler()[D:\ConsumerProductInter face\ConsumerProductControls\src\adaptive\controls\imageloader\ImageLoader.as:32]
    at adaptive.controls.imageloader::ImageLoader/imageCompleteHandler()
Steps are:
1- Create a .fla file and one object in it (like below):
2- In Flash Builder 4.6
Load the external swf:
                var swfLoader:Loader = new Loader();
                var url:URLRequest = new URLRequest("themes/DefaultTheme/DefaultTheme.swf");
                var loaderContext:LoaderContext = new LoaderContext(false, ApplicationDomain.currentDomain, null);
                swfLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, completeHandler);
                swfLoader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioErrorHandler);
                swfLoader.load(url, loaderContext);
        private function completeHandler(event:Event):void
            var evt:LoadThemeSWFEvent = new LoadThemeSWFEvent(LoadThemeSWFEvent.COMPLETE);
            if (AdaptiveHelper.getInstance().platform == PlatformType.DESKTOP)
                evt.swfLoader = SWFLoader(event.currentTarget);
            else
                evt.loader = Loader(event.currentTarget.loader)
            dispatchEvent(evt);
          // load is OK
        private function ioErrorHandler(event:IOErrorEvent):void
After load is complete I tried to get the object from the swf file and use it as a skin class of a button.
cssSelector.setStyle(property, Class(content.loaderInfo.applicationDomain.getDefinition("MainMenu")));
I am stuck here. Any ideas what the problem is?
My Best,
Suat

Hi Suat,
Can you send me a sample application @[email protected] with which I can reproduce your problem and can look into the issue?
Thanks,
Nimisha

External HD file size limits for movies

I recently bought (but have not yet connected) a Western Digital My Book Pro ext.HD for storage and started a thread - 'Best external hard drive...?' in the iMac forum to discuss this.
Though the responses were useful I would be pleased to have views from folks who specifically make and store their own movies.
As yet I am only using iMovie to edit DV footage (not HDV) but find, though saving frequently, that even short movies end up as much as 5 - 7GB. Converting them to Quicktime 'full quality' (ie .dv - hopefully with no loss) can sometimes reduce them, but other times very little at all.
My question is, being a little disappointed with the apparent limits in this new purchase:
If I want to keep the WD external in dual format FAT32 enabling me to take files to a PC how can I store files in it over 4GB?
If, as I suspect, this is out of the question and I am forced to reformat to Mac only is there a file size limit here?
Intel iMac 24" 2.16Ghz 2GB Mac OS X (10.4.10) G4 OS9

Using a Mac and video, hard drives would be normally formatted to Mac OS Extended (no limit).
Even though I personally don't do it you could have a partition using FAT32 for Windows.
Having the wrong format will restrict sizes even on Mac if Mac Standard is used. Windows needs to be NTFS for long video files.
Video files are large eg. DV files are 13.5 gig per hour. Compressing them reduces quality more or less depending type.
Al

Custom Class for movie clips

Hello AS2 Forum,
I am being forced to use AS2.0. (prefer AS3). I am using
Captivate 3, and want to add some Flash created swfs as animations
to a slide or slides in my Captivate project (Captivate 3 supports
AS2 only at this time).
I would like to create a class file that has symbol in it. By
symbols I mean MovieClips that are converted drawings.
My test case is just one item, a "plus" sign for addition. I
will want to add a minus, a divide (slash), and a multiply
(asterisk) once I get my class working.
I have a nice plus sign that I created using the Flash
drawing tools. Is there some way I can add this created symbol to
my class? I mean without putting a bunch of code in the class that
actually draws the plus sign using "lineto" this and "lineto" that,
etc. My thought is create a class called "Operator", and have the
signs in the class, and instantiate a sign using something like:
var plus:Operator = new Operator("plus");
The thought of creating the math to draw an asterisk is not
exciting!
Or should I just create the symbols in my fla file, convert
to movieclips, and add to the stage using the attachMovie scenario
(which is easier).
Tips???
Thanks,
eholz1

Hello Kglad,
Thanks for the info. I might be getting "smarter" as the
thought did occur to me, but did not try it. can I assume that I
would build a swf of the "image" and then use attachMovie to bring
the swf into my class file, and the when the class is instantiated
in my other flash file, I will have the object?
I will experiment.
Thanks
eholz1

External SWF or internal symbol for movie clips

Similar Messages

Maybe you are looking for