External Usb Hard drive and Sync Problems with Shuffle

First of all excuse me for my bad english, i'm trying to obtain answers here, because i haven't received help from italian forum.
I've an external USB HD where i put all my songs, the main notebook HD is too small...
So, i charge music inside the main Itunes libray called "Music" but the the real files are still on my external HD drive.
The problem is when i try to add a song or a folder and i don't connect the HD ext. drive to the notebook...
The shuffle erase everything.....but the title of the songs are still in the library...
Why??? Thx for all..

First of all excuse me for my bad english, i'm trying
to obtain answers here, because i haven't received
help from italian forum.
I've an external USB HD where i put all my songs, the
main notebook HD is too small...
So, i charge music inside the main Itunes libray
called "Music" but the the real files are still on my
external HD drive.
The problem is when i try to add a song or a folder
and i don't connect the HD ext. drive to the
notebook...
The shuffle erase everything.....but the title of the
songs are still in the library...
Why??? Thx for all..
The real files have to be available to iTunes (the USB HD has to be connected) otherwise Shuffle will "update" by erasing them. That's the way it is...

Similar Messages

External USB Hard Drive causes menu problem - menu items flash

Greetings:
I have a external USB hard drive (250 GB) that is partitioned into 3 hard drives. Two hard drives are formatted in MacOS standard and one is formatted in MacOS extended. I had to reformat the last drive in MacOS extended because the Macbook would not let me edit files on the drive.
The problem is that when I connect to the drives, the menu malfunctions (I cannot see the date and time and the menu items flash). Dismounting the drives solves the problem.
Do I need to reformat the hard drives? Or do I need a new USB drive?
Thank you.
EA

Hmm, someone else had a similar problem. Note the ":: Loading root filesystem module...-e" line. That "-e" shouldn't be there. It should be, instead, the module for the filesystem.
As a workaround for right now, you can add your filesystem module to the MODULES array, and remove the "filesystems" hook.
In that case, you'll probably want rootdelay=* to allow the drive some time to settle, and rootfstype=* to speed up filesystem detection while in kinit.
By the way, what filesystem do you have on that machine? Can you tell me what
/usr/lib/klibc/bin/fstype < /dev/sda1
outputs on a running system (you may need to be root, or add yourself to the "disk" group or something similar) - /dev/sda1 should be replaced if the usb drive is not sda1

How to use iPad (4th gen) to edit with iMovie - but using an external source such as a USB stick or external USB hard drive

Want to use my iPad (4th gen) to edit a movie using iMovie - easy enough if the movie file is on the iPad - but what if it's too large - can I keep the source file on a USB stick or external USB hard drive and edit from there? How can you do this?

You can't export any type of file using the camera connection kit, so a USB flash drive or SD card won't work.
There are some wireless external hard drives that can be used with the iPad.
The Kingston Wi-Drive, which costs $50 for the 16 Gigabyte, and then $30 more for every 16 gigs more. It works by you turning it on and then accessing the files on it from an app that you download on your iDevice. You can access music, movies, and other stuff. No connections or anything, it works like a WiFi connection, you connect to it from the setting on the iPad under wireless networks.
Then there is the Seagate GoFlex, which some would recommend over the Wi-Drive. But this one costs $199 and had 500 Gigabytes of storage. It works the sameway as the Kingston: no wires, runs over its wireless connection. You can actually fit up to 300 HD movies on it.
Another option:
Expand your iPad's storage capacity with HyperDrive
http://www.macworld.com/article/1153935/hyperdrive.html
On the road with a camera, an iPad, and a Hyperdrive
http://www.macworld.com/article/1160231/ipadhyperdrive.html
 Cheers, Tom

[SOLVED] Kernel panic when using external USB hard drive

I have a desktop PC with a 64 bit arch install, on a Core2 Duo 6320 CPU. I have been using (and continue using right now) a 500 GB "Iomega Desktop Hard Drive" external USB hard disk without problems. But I have just bought a 3 TB "Seagate Expansion" external USB hard drive and I'm unable to use it from my Arch install. Each time I try to format it or to copy data from the PC, Arch freezes with a kernel panic. Sometimes it freezes faster and I cannot see anything, but others I am able to see the following kernel messages, repeating several times:
[11701.205071] sd 3:0:0:0: [sdf] uas_eh_abort_handler ffff880014e13380 tag 29, inflight: CMD
[11701.221297] sd 3:0:0:0: [sdf] abort completed
[11701.221313] scsi host3: uas_eh_task_mgmt: ABORT TASK failed (wrong tag 0/256)
[11701.221323] sd 3:0:0:0: [sdf] uas_eh_abort_handler ffff880014e13500 tag 30, inflight: CMD
[11701.237550] sd 3:0:0:0: [sdf] abort completed
[11701.237567] scsi host3: uas_eh_task_mgmt: ABORT TASK failed (wrong tag 0/256)
[11701.237576] sd 3:0:0:0: [sdf] uas_eh_abort_handler ffff880014e13680 tag 31, inflight: CMD
[11701.253922] sd 3:0:0:0: [sdf] abort completed
[11701.253936] scsi host3: uas_eh_task_mgmt: ABORT TASK failed (wrong tag 0/256)
[11701.253956] sd 3:0:0:0: uas_eh_device_reset_handler
[11704.252182] scsi host3: uas_eh_task_mgmt: LOGICAL UNIT RESET timed out
[11704.252196] scsi host3: uas_eh_bus_reset_handler start
[11704.252443] usb 5-6: stat urb: killed, stream 0
[11704.358882] usb 5-6: reset high-speed USB device number 3 using ehci-pci
[11704.483206] scsi host3: uas_eh_bus_reset_handler success
Strange enough, the drive is listed by lsusb command as a 2TB but I don't think this is related to the problem (as the OS sees the 3 TB). This is the lsusb output:
Bus 001 Device 003: ID 0bc2:3312 Seagate RSS LLC SRD00F2 [Expansion Desktop Drive 2TB]
I have tried the drive on other PCs and it works flawlessly. Also tried booting Windows 8 on the same PC I have Arch installed in, and in Windows it also works perfect. I have tried using ext2 and NTFS filesystems. Tried also changing the USB cable without success. And right now I'm out of ideas. Any suggestions?
Last edited by doragasu (2014-07-03 11:06:25)

looks like it could be the UAS module , check https://bbs.archlinux.org/viewtopic.php?id=183190

C30: Booting from external USB hard drive

I carry my OS on an external portable USB drive, and then make use of whatever hardware is available where I visit.
I recently attempted to boot a Lenovo C30 Thinkstation with this external drive, and was unable to do so. In looking at the BIOS settings, there is no option to boot from USB (other than floppy(?!?) or memory stick).
Is it possible to boot from an external USB hard drive, and if not, why?
jerry

The boot sequence section of our setup menus has been troublesome to say the least (at least through the development phase). There are various reasons why it is the way it is now....from spec requirements to customer requirements. So long story short it really needs to be this way, even though situations like the one you encoutered is inconvenient.
The USB issue is actually done for security reasons. For example, many large customers don't want users to have the ability to just walk up and plug in a USB device and allow the system to detect that and attempt to boot to it right away as it is a risk to their image/security. For this reason, USB devices don't automatically get added to the boot order, and must be added throught he setup menu if needed.

Rescue and Recovery 4.3 on Win7 doesn't see a backup on external USB hard drive - Model W510

I've run the Rescue and Recovery utility within Windows 7 on two different external USB hard drives thinking that maybe it was a usb drive issue. When I open the R And R utility in expert mode I can see that both backups exist on their respective drives. I planned on updating my hard drive so I made a full hd backup and the R&R startup disc to boot the laptop from. The bios recognizes either external hard drive at boot with no problems. It shows the names and "+" sign next to drives. So I booted the drive at startup off the DVD drive with the R&R startup disc after I was sure that the bios recognized either external drives. Then when I choose a "Full" restore is of course asks me if I want to use hd, cd/dvd, or external usb drive which I choose the later. It then should show me the backup that I created earlier just as it did when I ran the utility from the Win7 environment so I can choose it to restore from. But I get a blank box showing no backups when I run the 4.3 R&R Startup disc. Again if I boot to Win7 and go into the R&R utility I can see the backup on the exact same USB external drive. Then boot off the CD startup recovery disc and it shows NO BACKUP! Help please! I want to shelf my old hard drive "as is" and create the Restore onto the new hard drive but the utility isn't working for me.
Thanks for any help.

Hmmm,
Seems like that _should_ work. Here's a way you might be able to finesse it: go to the advanced R&R menu in Win 7 and create rescue media on your USB drive. It's essentially the same process as creating the CD - it makes the USB drive bootable and puts a copy of R&R there.
There _should_ be an option to "preserve existing data" but be prepared to lose your existing backup and make it again.
Then just boot the external USB drive and see if R&R recognizes a backup image on the same drive from which you booted.
That's the way I usually migrate to new drives. Maybe it will get around your mysterious problem.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

500 GB external USB hard drive USB 2 configuration problems

Hello Sirs.
I recently adquired a 500 Gb external USB hard drive part number PX1269E-1G50.
I have some problems with the USB 2.0 configuration in windows XP. When i connect it to an usb 2.0 port i receive the message "High-speed USB hard disk drive plugged into a non-hi-speed usb hub", and the device stays in low USB (12 mbits/s) speed. (I checked the port with another usb 2.0 peripheral and the port is working in usb 2.0 mode correctly).
I checked the PXI1269E-1G50 in others pc and i have same results. I cant get it to work in USB 2.0 mode. I also have some problems with the virtual CD partition that is always present when you insert it and mount. Exist a way to remove it ?
I only use the hard disk for daily data back-up and i don't want to use any more drive letters in my system.
The main PC is an ASUS P4P800-E deluxe with windows XP SP2 fully updated and build in USB 2.0 intel controller.
Best regards
PAMF

Hello again everybody
OK. Finally i had to send the disk to my dealer. Toshiba in Spain says there is not solution. Sorry. This is an erratic product. Sometimes with one cofiguration simply works and sometimes with a different configuration does not connect in USB 2.0 mode. I don't want such a product in my desktop... and the Virtual CDrom is impossible to turn off. (I'm not interested in security tools. I only want to make daily backups)
Thanks to everybody in the forum for your help.
pamf
[Edited by: admin on 09-Jan-2007 20:51]

Is 250GB External USB Hard Drive compatible with Mac OSX on an iBook G4?

Hello,
I just bought a Toshiba 250GB External Usb Hard Drive because the seller recommended it to telling me that it works in my computer iBook G4 Mac OSX.
I prepared it and I see it on my desktop with a folder named System Volume Information and 2.32 GB available.
I tried to copy a file and I received a message telling that the disc can't be modified.
Where can I find the instructions to initialize it if it is compatible?
Thanks in advance,
Joan
Message was edited by: jinglada
Message was edited by: jinglada

I have a feeling this is a similar problem to my 400GB Usb2 drive. I reformatted it to the default Mac format in Disk Utility and it mounted!! Try this

Extreme with USB Hard Drive and Backup 3.1 - Slow Connection

Has anyone had any experience with Apple's .Mac Backup 3.1? I have just setup my network with the new Extreme Base Station "N" with my Express being the main base station connected to my cable modem. When I go to use Backup 3.1 to backup my user folder to the wireless external USB hard drive, it takes forever! Is this normal?

RD2516:
That's exactly what I did last night to backup my wife's MacBook Pro home folder (about 45GB). I hooked up the USB drive directly to the laptop and used Backup to make a "full" backup. (This after trying it wirelessly and realizing it would've taken all night).
Then, just for fun, I forced another backup a few minutes later. It was very quick, as expected. It spent a few minutes reading the files (64000 or so) and comparing them, but then did the very small incremental backup in seconds.
So, I think now that I have the biggest part of her home folder backed up, using Backup every night should be pretty easy.
Hope that helps.
jr
Xenon2.6 Mac OS X (10.4.8)

External USB hard drives working very slow and/or not recognized. Help!

This probably started after my Yosemite upgrade, but my external usb hard drives either aren't working well or not being recognized. It's taking forever to write files to my external Seagate Free Agent USB 2.0 through front ports and my thumb drives aren't mounting (they have shown up for a second or two, then nothing). Is there a fix? I'm on an early 2008 mac pro with Yosemite 10.10.2.
Thanks!

Do an SMC reset using this slightly-modified procedure:
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
1.Shut down the computer.
2. Unplug the computer's power cord.
[2a. Press the power-on button to discharge the power capacitors.]
3. Wait fifteen seconds.
4. Attach the computer's power cord.
5. Wait five seconds, then press the power button to turn on the computer.
in all cases, the stated times are recommended minimums, and there are no maximums.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

I put my macbook to sleep and unplugged my external USB hard drive, now It

does not show up on the desktop and can not be verified in Disk Utility. This is my first mac but have been running linux for a while now. Any help would be appreciated.

rustytiger wrote:
I put my macbook to sleep and unplugged my external USB hard drive, now it
does not show up on the desktop and can not be verified in Disk Utility. This is my first mac but have been running linux for a while now. Any help would be appreciated.
Well I hate to ask the silly question here but... did you plug the external hard drive back in?

External USB hard drive not being recognized

Hello! I'm sure this has been posted before, but excuse my naivety with this sort of thing...
I have a mac mini 10.5.6 (1.83 GHz Intel Core 2 Duo) and I run the Time Machine function to an external usb hard drive. The hard drive worked fine (plugged into the usb port on an older keyboard), but I went out and bought a new aluminum apple keyboard (because they look so cool ^_^ ) - I plugged the external usb drive into the keyboard and it wasn't recognized, so I tried plugging the external drive directly into the mac mini, but it is still not recognized. It is not showing up in Disk Utility or in System Profiler
Help? I'd hate to have to give up this fancy keyboard...
Thank you!
Dr. E

I believe I had my external drive plugged into the (old) keyboard because with the old mac that I had didn't have a free usb port for it - so when I got the mini I just plugged things back in where they were. But I have always had the Time Machine back up to this drive (connected to the keyboard) though it has been slow (another reason I thought the new keyboard was a good idea).
I tried restarting the computer without the alu keyboard plugged in, but same problem of no drive showing up.
Here is what System Profiler has to say about my drive:
USB2.0 Storage Device:
Capacity: 93.16 GB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk1
Product ID: 0x6830
Vendor ID: 0x04b4 (Cypress Semiconductor)
Version: 0.01
Serial Number: DEF107920F07
Speed: Up to 12 Mb/sec
Manufacturer: Cypress Semiconductor
Location ID: 0x3d130000
Current Available (mA): 100
Current Required (mA): 0
Mac OS 9 Drivers: No
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Not Supported
Volumes:
USB:
Capacity: 92.84 GB
Available: 53.14 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s2
Mount Point: /Volumes/USB
I don't know the brand or model as it has 'always' been in the case that in which it currently resides and I didn't physically buy the thing :\ I do know that no software was installed with the drive as I assumed that when I put all the old info from the original mac to the mini that it was the sort of thing that would carry over.
Sorry I'm not terribly helpful - Thank you!
Dr. E

External USB Hard Drive not showing up on Time Capsule

Hi all,
I have a 500 Gb Time Capsule that used to be able to detect my external USB hard drives. I had to store my things for a while and have just started using the Time Capsule again. The TC works fine, however, the same USB external hard drives I used to connect to the TC are not showing up anymore :s They show up on the desktop when I connect them directly to my MacBook via USB. I have been through most of the file sharing options in Airport Utility and System Preferences but have not been able to solve this. I can't think of any settings that would have changed from when they were showing up in the past. Any help would be greatly appreciated. Thx

yosemite won't work with ntfs drives for some reason, i've had the same issue with my toshiba. i thought ok lemme buy another one, and transfer it over maybe it's a driver issue which i've tried over and over, apple support can't figure it out.
here's a simple fix, but the problem is i have an external where all my photography and video files are stored, so i can't access them right now and it's making my life ****.
http://guides.macrumors.com/Formatting_an_External_Device
that does work and make the drive mountable now, but problem being i can't obviously reformat the old drive and lose everything. once the new drive is formatted for mac i can't plug it into a pc to transfer the files from. which is the only problem now. but formatting the drive for mac only DOES work. but you're just screwed and not able to use it ntfs. hope the link helps SOME people.

Unable to eject external USB hard drive

I've been using a 500 gb WD Passport external USB hard drive for about six months now, and recently it's had trouble ejecting. I'm not sure if it's the drive itself or my OS; sometimes I can eject it, other times I get the "the disk __ wasn't ejected because one or more programs may be using it.".
There are NO programs using the drive, and no users connected to the drive from elsewhere. Is there some process in the activity monitor that may be preventing the disk from unmounting?
I've tried to log out, relaunch the finder, quite all programs, etc - but the only sure fire method is to restart the computer - which leads me to believe there is some underlying system process that is causing the eject sequence to hang...
Any ideas? Will I potentially harm my disk's contents by force ejecting every time (so long as I'm certain no programs are writing files)?
Thanks!

I'm aslo having problems with a USB drive. In this case it's my Time Machine drive. Similar symptom that the only way to eject it is to restart the computer. Otherwise I get the same message. I also tried the Terminal command with the drag/return. What showed was an empty command line:
+ip-109-43-193-109:~ user$+
Now, the reason why I've even tried to do this is because I'm having problems backing up withTime Machine. Upon boot up, the first backup always works, but typically any subsequent b/up will fail with the following error code:
+Starting standard backup+
+Backing up to: /Volumes/Jimz TM 2/Backups.backupdb+
+Error: (22) setxattr for key:com.apple.backupd.ModelID path:/Volumes/Jimz TM 2/Backups.backupdb/user's MBP size:13+
+Error: (-50) Creating directory 2010-07-08-112436.inProgress+
+Failed to make snapshot container.+
+Error: (22) setxattr for key:com.apple.backupd.ModelID path:/Volumes/Jimz TM 2/Backups.backupdb/user's MBP size:13+
+Backup failed with error: 2+
+Stopping backupd to allow ejection of backup destination disk!+
+Stopping backupd to allow ejection of backup destination disk!+
+Stopping backupd to allow ejection of backup destination disk!+
+Stopping backupd to allow ejection of backup destination disk!+
+Stopping backupd to allow ejection of backup destination disk!+
+Stopping backupd to allow ejection of backup destination disk!+
+Stopping backupd to allow ejection of backup destination disk!+
+Stopping backupd to allow ejection of backup destination disk!+
+Stopping backupd to allow ejection of backup destination disk!+
+Stopping backupd to allow ejection of backup destination disk!+
+Stopping backupd to allow ejection of backup destination disk!+
+Stopping backupd to allow ejection of backup destination disk!+
+Stopping backupd to allow ejection of backup destination disk!+
+Stopping backupd to allow ejection of backup destination disk!+
+Stopping backupd to allow ejection of backup destination disk!+
+Stopping backupd to allow ejection of backup destination disk!+
+Stopping backupd to allow ejection of backup destination disk!+
+Stopping backupd to allow ejection of backup destination disk!+
+Stopping backupd to allow ejection of backup destination disk!+
+Stopping backupd to allow ejection of backup destination disk!+
+Stopping backupd to allow ejection of backup destination disk!+
+Stopping backupd to allow ejection of backup destination disk!+
+Stopping backupd to allow ejection of backup destination disk!+
+Stopping backupd to allow ejection of backup destination disk!+
Also, this is the first time that I've seen the error lines regarding ejection of the disc.
Thanks in advance for any thoughts on this.

Imaging from external DVD player or an external usb hard drive

Hey,
At the High School i work at we are running Netware 6.0 SP5 and Zenworks
4.01 ir6. We have Zen Partitions installed on most computers to store a
local image in case the the computer needs to be re-imaged.
However, we have a dilemma. Every now and then a hard drive will go in a
computer.
When we replace the hard drive with a new one, we install the Zen
Partition, do the config and then our last step is to bring down an image.
Unfortunately our only means of dropping down an image is from the network
either through normal imaging or through multicast sessions.
When we drop an image down from the network which takes up network
bandwidth, it causes slow downs on the users computers and they start
complaining. Our network is running at 100mb.
Is there any way possible to image from an external DVD player or an
external usb hard drive when dropping down an image to a new hard drive in
the computer? Currently I have all my Zen Images on the external USB
Maxtor 160gb hard drive and I also have Zen Images burnt to DVD's.
If so, how do I go about doing this and is there documents on doing this?
Thanks!!!

Bpilon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

External Usb Hard drive and Sync Problems with Shuffle

Similar Messages

Maybe you are looking for