External USB HD w/ Snow Leopard - boot from Windows machine

Is there a way for me to install Snow Leopard on an external USB or Firewire so that I can plug it in and boot it up from a PC?
Thanks,

Nope. And if you could, it would be a violation of the license to OSX.

Similar Messages

Will it work to un-install Snow Leopard (booting from original disks) and then reinstall, then upgrade without erasing hard drive on iMac?

I have both a bootable backup exernal hard drive and the original system disks. I have read on these support pages that you cannot get snow leopard freshly installed without erasing the whole whole drive since the original installation disks are older than the current updated version. I have also read here that it is possible to get the system newly installed (though it's wise to have a back up of the rest of your files). I need to know which can work. Is there an un-install function after booting from a different source? If I can get the system filess off the main hard drive and then install Snow Leopard from my original disks, then go through the upgrades, and end up with the rest of my files intact, that would be wonderful. I have all the adobe design premium software on the system with their updates and would like to not spend hours and hours restoring it all. And since I don't know where all the little bits and pieces of the Adobe programs get installed, perhaps it won't work anyway?
thanks,
Kahty

I have read on these support pages that you cannot get snow leopard freshly installed without erasing the whole whole drive since the original installation disks are older than the current updated version.
That is incorrect. You can install an older version of the same OS over itself. With Snow Leopard and later, unless you intentionally select to erase the drive, the OS removes and replaces all remnants of the current OS and leaves all of your third party apps, personal files and settings intact.
I have also read here that it is possible to get the system newly installed (though it's wise to have a back up of the rest of your files).
That is the correct information.
Is there an un-install function after booting from a different source? If I can get the system files off the main hard drive and then install Snow Leopard from my original disks, then go through the upgrades, and end up with the rest of my files intact, that would be wonderful.
No, there is no way to remove just the OS files from a drive. At least, not in any manner you could call easy. There are thousands of hidden files and folders related to UNIX. Many apps won't even run correctly, or at all, if they're not on the same drive you are starting up to. So trying to separate your third party apps from the drive the OS is on is not a good idea.
I have all the adobe design premium software on the system with their updates and would like to not spend hours and hours restoring it all.
If your end goal is to simply get the contents of the external drive onto a new internal drive in a bootable form, you can use Disk Utility to clone the drive, or use one of two excellent third party apps; SuperDuper! or Carbon Copy Cloner.

Snow Leopard & Boot Camp & Windows XP & Bluetooth

Hi everyone,
I just bought a new iMac. I upgraded to Snow Leopard. And I installed Windows XP on Boot Camp. The installation went perfectly until I had to pair my wireless keyboard and mouse to Windows.
When the installation finished, I opened the Bluetooth Device on my control panel. I was able to scan for devices. My computer found both the keyboard and mouse. I was able to pair the keyboard, but I couldn't get the mouse to work. Trial and error, error, and more error occurred. (I know now about 0000 and the mouse.)
At one point, I unpaired the keyboard and restarted the machine. Now when I open the Bluetooth device it says:
"Device Status: Windows has stopped the device because it has reported problems. (Code 43)"
The bluetooth device was just working. I can't figure out how to make it work again. It won't find the mouse or keyboard. I tried installing and uninstalling the Bluetooth device from the device manager. I tried repairing the device drivers from the Snow Leopard disk. I've googled and googled.
Does anyone know how I can pair my Windows XP with my mouse and keyboard? Should I erase the partion and start over again?

For the record, I gave up and booted my computer back to Snow Leopard. After about a week, I decided to try to fix this problem again. I booted up Windows from Bootcamp. And miraculously the problem was solved. The bluetooth was working; I paired both the keyboard and mouse. I don't know what fixed the problem but it was fixed.

Snow leopard - Boot Camp - Windows XP

Hi Guys!
One quick question, I had installed Windows XP using Boot Camp on my iMac, when it was still running Leopard. The installation was successful, I don't go online using Windows, as I only use it to play some games with my children, and I don't want any virus... and mainly... I don't need Windows for anything else!!!
After installing Snow Leopard, do I have to update any Windows driver using Boot Camp?
If so, how do I do it? Just launch Boot Camp and let it look for the drivers?
Thanks a lot for any help...
: )

*Hey kappy / hatter*
Thanks a lot for your responses...
I thought about booting from the SL cd as well, but I was not sure about it... hatter, what do you mean by?
*"You don't have to install Boot Camp 3.0 to XP"*
Does it mean I shouldn't do the procedure recommended by Kappy?
About my XP partition, I use it solely to play games like, Zoo Tycon, CimCity, Lego, etc with my little children... so i have no back up... in case it goes bad... I don't lose anything, and reinstall XP. All my professional apps and files are on my iMac partition... Photoshop, Flash, etc... then I have both a bootable SuperDuper backup, and a Time machine backup too.
On XP, I just wanna make sure I have all the drivers installed to run the games ok...
Thanks

13" Macbook (black), Snow Leopard, Boot Camp, Windows 7 display issue

OK I don't know where to post this. I couldn't find an appropriate forum under Boot Camp (nothing for display). Apologies if this is the wrong forum.
I am attempting to run Windows 7 using Boot Camp. Here is the behavior:
Booting Windows 7 without any monitor plugged in works fine.
Booting with an external monitor plugged in, I get the display on the external monitor. Now when I unplug the external monitor, the LCD display backlight is off and is completely dim. I had to reboot it in order for the LCD display to work again.
This is not a macbook display issue. But it has to do something with the way Windows 7, BootCamp are compatible with a macbook. Anyone seen this or know what the fix is?
Thanks
Sri

I can not get my Win 7 (32) os to see my Mac 10.6 partition. Is there something I need to set or turn on to get this to work?
As for your problem, perhaps Windows is not seeing the FireWire bus?

OS X Snow Leopard Server and Windows Machines

Hello! My wife's company is using Windows on a network. Is it possible to use a Mac server to control these? They will be eventually switching over, but are stuck with windows for the time being. We are hoping not to have to buy a windows server because they will be switching to Mac anyways. Am I making any sense?

Not a ton But to answer what I believe is your question. OS X Server can run as a Primary Domain Controller. This is not the same as an Active Directory domain controller. However, for many environments running pre Windows 7, this means that OS X Server can act as the sole directory container and all workstations (Windows, Mac, many flavors of Linux) can be bound into the OS X Server for single directory management. By the way, the community appears to have found a way to join Win 7 systems as well.
However, the easiest way of doing this may be to keep your Windows servers and move to Mac clients. Some of the questions that you need to be asking is will OS X Server be able to replace all the features currently in use on the Windows machine? How are you accounting for groupware, backup, disaster recovery, etc? Have you evaluated all of your software needs? Have you looking into physical security and data protection?
The rage is to go Mac. But it is not a panacea. Mac systems require the same amount of thought and consideration in design that a Windows environment does. Do you generally have fewer issues with Macs... sure. But don't think that everything will just magically work because there is an Apple logo on it.

Help wanted! Can't boot Snow Leopard, neither from HD nor disc!

Hi.
I tried to install Windows in Bootcamp on my wife's MacBook Pro 15" 2.4Ghz (with OSX SL), but something went wrong in the process and I now want to start all over by erasing the Bootcamp partition entirely.
But, as I try to start up in MacOSX it just stops at the start sound over and over again.
Can't shortcut by force starting it from MacOSX (command-X), from disc (command-C) or as a firewire disc (command-T).
I also can't eject the Snow Leopard DVD from the drive bay.
All it does is trying to boot and making the start up sound over and over and over and....
Help is VERY much appreciated, please!

Try starting in Safeboot and see if you get any further. To eject the DVD hold the left mouse button of a wired mouse on startup.

How do I create multiple live USBs of Operating systems to boot from on one flashdrive?

How do I create multiple live USBs of Operating systems to boot from on one flashdrive?
I am attempting to create multiple live USBs within one flashdrive so that i can boot various operating systems without having to buy multiple USb sticks. I am using a Mac OS X Snow Leopard 10.6.8 Operating System currently. I am using the Terminal provided by the OS.
I would like to try Debian, Kali, Precise Puppy, and Sabayon- with one space left empty for whatever Linux OS I would like to try next. I have partitioned an 8GB flashdrive into the following sections:
name of intended OS,     space allocated for it:
1)Debian ........................1.32 GB
2)Kali..............................2.61GB
3)Precise Puppy..............163.7MB
4)Sabayon.......................1.77GB
5)TBD..............................2.14GB
I have figured out how to change the .iso files of the operating systems into .img files with the following commands:
hdiutil convert -format UDRW /path/to/input.iso -o /path/to/output.img
a .img.dmg file is created, this is corrected in the next line of code *please note: I am a a very beginner at programming, and would greatly appreciate any help. Thank you!
mv /path/to/output/file.img{.dmg,}
This is where I started to get confused:
I entered diskutil list to find the location of the partitions on my flashdrive, and this is the relevant section:
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *8.0 GB     disk1
   1:                 DOS_FAT_32 DEBIAN               1.3 GB     disk1s1
   2:                 DOS_FAT_32 KALI                    2.6 GB     disk1s2
   3:                 DOS_FAT_32 PRECISE            163.7 MB   disk1s3
   4:                 DOS_FAT_32 SABAYON           1.8 GB     disk1s5
   5:                 DOS_FAT_32 TBD                     2.1 GB     disk1s6
This is the code I attempted to use and the subsequent result:
charles-burtons-mac-mini:~ charlesburton$ sudo dd if=/Users/charlesburton/Desktop/debian-live-7.2-i386-gnome-desktop.img of=/dev/disk1s1 bs=1m
dd: /dev/disk1s1: Resource busy
*at this point I went to the Disk Utility GUi and unmounted only the DEBIAN partition, now back to the terminal*
charles-burtons-mac-mini:~ charlesburton$ sudo dd if=/Users/charlesburton/Desktop/debian-live-7.2-i386-gnome-desktop.img of=/dev/disk1s1 bs=1m
dd: /dev/disk1s1: end of device
1259+0 records in
1258+1 records out
1320005632 bytes transferred in 1011.966891 secs (1304396 bytes/sec)
Please may someone help explain why I had a return value of +1 in my records in and how I can make it work properly.

I would like to know the answer to this as well. I tried renaming the 3D version by adding 3D after it, but it still not a separate movie in iTunes.
It's putting them in the same folder.

External USB hard disk fails to boot

I installed Arch Linux on an external USB Lacie 1 TB Hard Disk. I followed instructions on WiKi: "install from exisiting linux", method 2, since I already have Linux installed
on the internal HDD of my laptop (dual boot with Windows, also with Grub as bootloader).
Problem: The external HDD stalls during boot right after the "Welcome to Grub!" - message. I can only hard-reset my laptop from there.
The external HDD has msdos Partition Table. It is recognized by BIOS just fine, since I can choose to boot from it. It has following (very simple) partition setup:
[root@arch-laptop chris]# fdisk -l /dev/sdb
Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x000c9610
Device Boot Start End Blocks Id System
/dev/sdb1 * 2048 40962047 20480000 83 Linux
So there's just the root partition, no boot or home partition defined. Grub installed to the external HDD with no errors.
Here's the grub.cfg auto-generated, without anything adapted. The UUID of the external HDD /dev/sdb1 is correct.
[root@arch-laptop grub]# cat grub.cfg
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 5fe1d28c-2640-4b5c-b98b-75d147479348
else
search --no-floppy --fs-uuid --set=root 5fe1d28c-2640-4b5c-b98b-75d147479348
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=5
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_archlinux ###
menuentry "Arch Linux pkg-linux kernel" --class arch-linux --class arch --class gnu-linux --class gnu --class os {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
fi
set gfxpayload=keep
insmod ext2
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 5fe1d28c-2640-4b5c-b98b-75d147479348
else
search --no-floppy --fs-uuid --set=root 5fe1d28c-2640-4b5c-b98b-75d147479348
fi
echo 'Loading Arch Linux pkg-linux kernel ...'
linux /boot/vmlinuz-linux root=UUID=5fe1d28c-2640-4b5c-b98b-75d147479348 rw quiet
echo 'Loading Arch Linux pkg-linux kernel initramfs ...'
initrd /boot/initramfs-linux.img
menuentry "Arch Linux pkg-linux kernel (fallback initramfs)" --class arch-linux --class arch --class gnu-linux --class gnu --class os {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
fi
set gfxpayload=keep
insmod ext2
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 5fe1d28c-2640-4b5c-b98b-75d147479348
else
search --no-floppy --fs-uuid --set=root 5fe1d28c-2640-4b5c-b98b-75d147479348
fi
echo 'Loading Arch Linux pkg-linux kernel ...'
linux /boot/vmlinuz-linux root=UUID=5fe1d28c-2640-4b5c-b98b-75d147479348 rw quiet
echo 'Loading Arch Linux pkg-linux kernel fallback initramfs ...'
initrd /boot/initramfs-linux-fallback.img
### END /etc/grub.d/10_archlinux ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-5fe1d28c-2640-4b5c-b98b-75d147479348' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 5fe1d28c-2640-4b5c-b98b-75d147479348
else
search --no-floppy --fs-uuid --set=root 5fe1d28c-2640-4b5c-b98b-75d147479348
fi
echo 'Loading Linux linux ...'
linux /boot/vmlinuz-linux root=UUID=5fe1d28c-2640-4b5c-b98b-75d147479348 rw quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux.img
submenu 'Advanced options for Arch Linux' $menuentry_id_option 'gnulinux-advanced-5fe1d28c-2640-4b5c-b98b-75d147479348' {
menuentry 'Arch Linux, with Linux linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-advanced-5fe1d28c-2640-4b5c-b98b-75d147479348' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd1,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 5fe1d28c-2640-4b5c-b98b-75d147479348
else
search --no-floppy --fs-uuid --set=root 5fe1d28c-2640-4b5c-b98b-75d147479348
fi
echo 'Loading Linux linux ...'
linux /boot/vmlinuz-linux root=UUID=5fe1d28c-2640-4b5c-b98b-75d147479348 rw quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/60_memtest86+ ###
### END /etc/grub.d/60_memtest86+ ###
the internal HDD (/dev/sda) also has GRUB installed, without any problems, with a graphical console menu.
GRUB version is 2.02
laptop: dv6-6b41ed
Legacy BIOS (no EFI / UEFI).
Any ideas on how to solve / troubleshoot this?
Last edited by christopher72 (2014-04-21 15:05:21)

Any hooks in particular? I don't know which hook to add other then the 'blocks' hook, which is there already:
HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
Also, I don't think that could be the problem since loading the initramfs image takes place after choosing something from the Grub Menu. That menu never appears, I just get "welcome to grub!" with a blinking cursor underneath.
I did add "insmod usbms" in grub.cfg, but that didn't change anything.
What strikes me as odd is that in grub.cfg, the disk is referred to as "hd1", where I think it could just as well be "hd0" if that's the first hard disk the BIOS boots from. But I'm not sure if that really matters since the search is done with the UUID.
Another thing I tested earlier: I dd 'd the Arch Live image to the external usb HDD, and then it boots fine...

How do i set up a new lion imac from a snow leopard imac using time machine?

How do i set up a new lion imac from a snow leopard imac using time machine?

Connect the two via Firewire cable - Transferring files between two computers using FireWire. Boot the old iMac into Target Disk Mode. Boot the new iMac normally.
If you are starting the new iMac for the first time then do the above before you turn on the new iMac. After you turn on the new iMac you will begin in the Setup Assistant. When you complete the registration screens you will be offered an opportunity to migrate your data from another Mac. Follow the instructions to migrate your old Home folder, third-party applications and support files, and system preferences to the new iMac.
If you have already gone through the Setup Assistant and created an initial admin user account, then you do the connection step but will use Migration Assistant in the Utilities folder of the new iMac.

Can I have mavericks time machine on one partition of a WD external hard drive and snow leopard data on another

can I have mavericks time machine on one partition of a WD external hard drive and snow leopard data on another

If you want to and it is so large that it has room (350% is a good estimate for TimeMachine), then use a partition(s) to hold system restore images or bootable clones. Or VM images.
Using SSDs most Mac Pro models can easily hold 6 or more storage devices inside, except the nMP cylinder 6,1's; which do need external Thunderbolt and USB3.
System drive / data / scratch / backup data / backups of system / ....
I recommend a couple system backups, especially when faced with dual boot situations as well as an OS that is still undergoing updates and changes.

Apple USB modem and snow leopard = kernel panic !

Hello,
With Snow (10.6.1) I encounter very often a kernel panic when I turn off the
Mac.
When I check the console I have this:
Interval Since Last Panic Report: 670049 sec
Panics Since Last Report: 1
Anonymous UUID: F080CD9F-6604-4AF2-82F1-D43BE33F40C5
Tue Oct 6 07:38:13 2009
panic(cpu 1 caller 0x2a6ac2): Kernel trap at 0x08090001, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x00100000, CR4: 0x00000660
EAX: 0x089ec400, EBX: 0x08e51000, ECX: 0x08e51004, EDX: 0x0145aff1
CR2: 0x00000000, EBP: 0x4c1ebc88, ESI: 0x087cd800, EDI: 0x00000000
EFL: 0x00010246, EIP: 0x08090001, CS: 0x00000008, DS: 0x00030010
Error code: 0x00000002
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x4c1eba78 : 0x21acfa (0x5ce650 0x4c1ebaac 0x223156 0x0)
0x4c1ebac8 : 0x2a6ac2 (0x590a50 0x8090001 0xe 0x590c1a)
0x4c1ebba8 : 0x29c968 (0x4c1ebbc0 0x8c7c9e0 0x4c1ebc88 0x8090001)
0x4c1ebbb8 : 0x8090001 (0xe 0x48 0x4c1e0010 0x4f0010)
0x4c1ebc88 : 0x1333880 (0x8e51000 0x8e51000 0x0 0x8e6b400)
0x4c1ebca8 : 0x133269d (0x8e72280 0x0 0x0 0x1)
0x4c1ebce8 : 0x133277c (0x8e6b400 0xb000001 0x3 0x2000)
0x4c1ebd28 : 0x3064df (0xb000001 0x3 0x2000 0x8dfad20)
0x4c1ebd68 : 0x30cedb (0x4c1ebdb0 0x0 0x4000000 0x0)
0x4c1ebd98 : 0x2f8b48 (0x4c1ebdb0 0x246 0x4c1ebe08 0xa80d6f0)
0x4c1ebdd8 : 0x2ee35c (0xa80d6f0 0x3 0x4c1ebed8 0x0)
0x4c1ebe28 : 0x2ee422 (0xa80d6f0 0x3 0x4c1ebed8 0x0)
0x4c1ebe88 : 0x469be6 (0x92634e0 0x4c1ebed8 0x4c1ebeb8 0x3007dc)
0x4c1ebef8 : 0x46b9dc (0x865b280 0x92634e0 0x8dfad20 0x0)
0x4c1ebf38 : 0x46baad (0x0 0xa 0x4c1ebf5c 0x1)
0x4c1ebf78 : 0x4ed85f (0x8dfad20 0x9811ee8 0x9fa62a4 0x0)
0x4c1ebfc8 : 0x29d3fd (0x9811ee4 0x2 0x10 0x82d32a4)
Kernel Extensions in backtrace (with dependencies):
com.apple.iokit.IOSerialFamily(10.0.2)@0x132e000->0x1336fff
BSD process name corresponding to current thread: pppd
Mac OS version:
10B504
Kernel version:
Darwin Kernel Version 10.0.0: Fri Jul 31 22:47:34 PDT 2009; root:xnu-1456.1.25~1/RELEASE_I386
System model name: Macmini3,1 (Mac-F22C86C8)
System uptime in nanoseconds: 5693599172824
unloaded kexts:
com.apple.driver.AppleFileSystemDriver 2.0 (addr 0x105c000, size 0x12288) - last unloaded 98582035842
loaded kexts:
com.Logitech.Control Center.HID Driver 3.1.0
com.apple.driver.AppleHWSensor 1.9.2d0
com.apple.filesystems.autofs 2.1.0
com.apple.driver.MotorolaSM56KUSB 1.5.10
com.apple.driver.AppleHDA 1.7.4a1
com.apple.driver.ApplePlatformEnabler 2.0.0d2
com.apple.driver.AGPM 100.8.15
com.apple.driver.AppleUpstreamUserClient 3.0.5
com.apple.driver.NVSMU 1.1.7
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.0
com.apple.driver.AppleIRController 161
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.driver.ACPISMCPlatformPlugin 3.4.0a20
com.apple.driver.AppleLPC 1.4.6
com.apple.GeForce 6.0.2
com.apple.driver.AppleHIDKeyboard 1.1.5f1
com.apple.iokit.SCSITaskUserClient 2.5.1
com.apple.iokit.IOAHCIBlockStorage 1.5.0
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleFWOHCI 4.3.4
com.apple.driver.AirPortBrcm43xx 410.91.20
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleUSBHub 3.7.8
com.apple.driver.AppleAHCIPort 2.0.0
com.apple.nvenet 1.0.58
com.apple.driver.AppleUSBOHCI 3.7.5
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleRTC 1.3
com.apple.driver.AppleUSBEHCI 3.7.5
com.apple.driver.AppleACPIButtons 1.3
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.3
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 90.0.0
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.0.11
com.apple.driver.AppleIntelCPUPowerManagement 90.0.0
com.apple.nke.ppp 1.5 - last loaded 158842070257
com.apple.iokit.IOBluetoothSerialManager 2.2.1f7
com.apple.iokit.IOSerialFamily 10.0.2
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.DspFuncLib 1.7.4a1
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleSM56KUSBModemFamily 1.1.12
com.apple.driver.AppleSM56KUSBAudio 1.9.16
com.apple.iokit.SM56KUSBAudioFamily 1.6.1
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 73.0
com.apple.iokit.IOAudioFamily 1.7.0fc16
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.7.4a1
com.apple.iokit.IOHDAFamily 1.7.4a1
com.apple.iokit.AppleProfileFamily 40
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 3.4.0a20
com.apple.nvidia.nv50hal 6.0.2
com.apple.NVDAResman 6.0.2
com.apple.iokit.IONDRVSupport 2.0
com.apple.iokit.IOGraphicsFamily 2.0
com.apple.driver.BroadcomUSBBluetoothHCIController 2.2.1f7
com.apple.driver.AppleUSBBluetoothHCIController 2.2.1f7
com.apple.iokit.IOBluetoothFamily 2.2.1f7
com.apple.iokit.IOUSBHIDDriver 3.7.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.5.1
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.AppleUSBMergeNub 3.7.5
com.apple.driver.AppleUSBComposite 3.7.5
com.apple.iokit.IOAHCISerialATAPI 1.2.0
com.apple.iokit.IOSCSIArchitectureModelFamily 2.5.1
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOFireWireFamily 4.1.7
com.apple.iokit.IO80211Family 300.20
com.apple.iokit.IOUSBUserClient 3.7.5
com.apple.iokit.IOAHCIFamily 2.0.0
com.apple.iokit.IONetworkingFamily 1.8
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOUSBFamily 3.7.8
com.apple.iokit.IOHIDFamily 1.6.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 281
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: Macmini3,1, BootROM MM31.0081.B00, 2 processors, Intel Core 2 Duo, 2.26 GHz, 4 GB, SMC 1.35f0
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x90), Broadcom BCM43xx 1.0 (5.10.91.19)
Modem:
Bluetooth: Version 2.2.1f7, 2 service, 0 devices, 1 incoming serial ports
Network Service: External Modem, PPP (PPPSerial), ppp0
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: HTS721010G9SA00, 93,16 GB
Serial ATA Device: PIONEER DVD-RW DVRTS08
USB Device: Hub, 0x050d (Belkin Corporation), 0x0264, 0x24700000
USB Device: EyeTV Diversity, 0x0fd9, 0x0011, 0x24730000
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0x24100000
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc50e, 0x24110000
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0221, 0x24120000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000
USB Device: Apple USB Modem, 0x05ac (Apple Inc.), 0x1401, 0x06400000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8216, 0x06110000
We can see the following information:
BSD process name corresponding to current thread: pppd
so this is a bug with the Apple USB modem and snow leopard !
you know what to do?
Thank you very much for your help

up !
the problem is still there

Can i use someone else's Snow Leopard boot disk to upgrade my mac?

I am unfortunately at that stage in life where as a teenager i have many lusts and "needs" but have hit the road block... money.
I have enough to buy lion through the appstore but have not got enough to first upgrade to Snow Leopard and THEN Lion as well.
If my dad has a Snow Leopard boot disk with his mac, can i use it to upgrade mine and then go on to buy Lion through the Mac Appstore?
Thanks!

No for possibly two reasons ... First, that's illegal as it's a violation of the Apple license agreement, and second, boot disks are locked to the system type they are delivered with. Ask your Dad instead how you can earn $29 doing some chores around the house, or let the word get out that for any holiday gifts in December that cash would be appreciated.
Since you're on Leopard today, you probaby know in wanting to move to Lion that Lion no longer has the Rosetta emulator and thus doesn't support anything with PowerPC code. That's surprised some, so just FYI.

Will upgrading to Snow Leopard affect my Windows 7 boot camp partition?

Hi,
Did some preliminary searching on this before posting but couldn't find with confidence my answer. Does anybody know? Details below.
Q: Will upgrading to Snow Leopard affect my Windows 7 boot camp partition?
I'm running 10.5.8 on a single drive with two partitions. 1st partition for OS-x is extended (journaled), 2nd partiction (ntfs) has solid version of Windows 7 RC, build 7100 running.
Thanks.

Hi Michael,
here are some nice 'Myths and Facts' about Intel Macs and BootCamp http://refit.sourceforge.net/myths/
Bottom line: while not exactly needed for installing Windows on an Intel-based Mac, the BootCamp Assistant 'streamlines' the process with a nice GUI (no need for 'cryptic' Terminal commands).
Mac OSX as of now (10.5 Leopard and above) plus the uptodate firmware for Intel-Macs already include everything needed to install and boot Windows.
Deleting or reformating an OSX partition does not affect the Windows partition.
However a repartitioning of course does, if the Windows partition is on the same harddisk.
But even a repartitioning of any other harddisk (ones that not have the Windows partition on them) does not affect the Windows partition.
Did that myself when adding/upgrading the harddisks in my Mac Pro.
Nonetheless, when 'fumbling' with harddisks and partition structure I always have backups of my important files at hand.
Take care
Stefan

After installing a new hard drive can I install snow leopard directly from snow leopard disc

After installing a new hard drive can I install snow leopard directly from snow leopard disc. Or do I have to install previous versions first. iMac 7.1 (2007) 2.8ghz

You can install directly, assuming the disk is newer than your computer and not designed for a different Mac, but doing so won't install iLife.
(64305)

External USB HD w/ Snow Leopard - boot from Windows machine

Similar Messages

Maybe you are looking for