External USB Storage not found Lenovo IX2

Hello,
When I try to connect my 4TB External USB Drive to my ix2 it does not get gound. I also tried a friends 3TB Drive which does not work. When I connect a smaller 500gig drive it does get found.
It looks like large external USB drives are not accepted. Is there a solution for this?
Thanks,
Rigel

Hi rigelpaulin,
This device cannot read external drives over 2TB. You will have to limit the partitions on the drive to 2TB or less.
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page

Similar Messages

External usb storage

The external usb storage is only detected on a restart of the Z4 tablet. On my Z1 compact phone it is recognised when plugged in. Has anybody else had the same issue? Yes it is FAT32 and my phone has no issues with it. Thanks.

I have been in touch with Sony 'Xperia Care' about the issues I have raised with the USB support on the Z4 tablet. Again I have the full transcript, but the following extracts from their email confirm my worst suspicions. They said: 'I can confirm that when a USB device is connected to the tablet the SD card is meant to unmount.' and 'We would also not recommend using a USB hub on the tablet as this not the intended purpose of connecting a USB device to the tablet, the main one being for external storage. '
What follows is based on my experience so far: This means that while a USB memory device is attached to the Z4 tablet, any app which has been transferred to the SD card will stop. If an app attempts to run in the background, the Z4 tablet can crash. This has happened on my Z4 tablet.Using 'Tap here to safely remove USB storage' does not re-mount the SD card. The only way to restore access to the SD card is to restart the Z4 tablet.On some occasions, both USB memory AND SD based apps work, despite what Xperia Care say! However this not the norm! When the USB device is removed, the SD card becomes unmounted!Although Sony do not recommend the use of USB hubs, they do work. However: If the hub offers power to the Z4 tablet, the Z4 will go in to 'charge' mode and disables the OTG data mode. If the hub is completely non-powered, the Z4 tablet is likely to disable power to the USB port and close it down if you attach multiple devices. It certainly can't power a USB powered hard drive, unlike my LG G3 phone which can! If the hub powers USB devices but not the Z4 tablet, it seems to work normally. However, the USB implementation on the Z4 can only support ONE memory device, again unlike my LG G3 phone which supports the two I have tried and probably more!I have told Xperia Care that I think the USB support on the Z4 tablet is a mess!

I AM UNABLE TO UNLOCK MY PHONE AS IT GOT DISABLED AFTER TYPING INCORRECT PASSCODE.IF I CONNECT MY PHONE TO ITUNES IT SAYS USB DEVICE NOT FOUND.

AFTER TYPING INCORRECT PASSCODE MULTIPLE TIMES MY PHONE GOT DISABLED. IT SAYS CONNECT TO ITUNES BUT ON CONNECTING IT SAYS USB DEVICE NOT FOUND.

See this support document for instructions on how to deal with a disabled device or forgetting your passcode. iOS: Forgot passcode or device disabled

External USB storage no longer recognized by kernel [SOLVED]

If I plug in an external USB thumb drive, my system no longer sees it.
-gdisk and fdisk do not see it
-gparted cannot see it
-thunar cannot see it
I have a USB mouse and keyboard that work just fine. Here is my dmesg. You can see in the last line that something detected me plugging in the USB thumb drive, but that's it. Is this something with udev or ?
[ 110.596683] usb 1-3: new high-speed USB device number 4 using ehci_hcd
I found this thread but my problem is different from the op's.
I run the linux-ck package from the AUR but as a sanity check, installed the ARCH kernel package and this problem exists under both:
$ uname -r
3.2.6-2-ARCH
Last edited by graysky (2012-02-19 00:44:26)

I know this thread is marked solved, but I have the exact same problem - I just installed the linux-ck package from the AUR (running linux-ck version 3.2.11-1), alongwith the nvidia-ck package. The kernel was compiled with the localmodcfg and BFQ options enabled in the pkgbuild. Now when I plug in an external drive, dmesg detects it, but no device nodes are created under /dev.
There is nothing wrong with the drives (happens with multiple drives) - and they are mounting fine under the stock kernel. lsusb also shows the drive present. I thought this might be an issue with needing to rebuild initramfs using mkinitcpio, but the available hooks seem to include all the usual ones from the stock kernel, nor does the wiki article mention needing to do such a thing. Any ideas?
EDIT: I didn't notice in the OP that the problem persisted with both the -ck kernel and the stock kernel. In my case, it only persists with the -ck kernel - and this happens on two different computers.
Last edited by manzdagratiano (2012-03-16 06:40:27)

External USB HDD not recognized by Time Capsule

Hi, I read that I should be able to extend my Time Capsule 500Gb with an external USB disk, and I bought a 500Gb Maxtor with external Power supply and USB 2 interface. I formatted it as mnentionen in all other threads I've read, but it dont show up in the Disks window in Airport Utility. Tried every combinations of restart procedures, plug/unplu, you name it. I tried vit a 2Gb USB Stick vith the same formatting - no problem, it showed up immediately.
Does the drive/USB interface have to be of a specific type (nothing like that is mentioned in the documentation), but it seems that there is an issue here?

I was having same trouble and finally found a solution by hooking my external drive to my time capsule through a powered USB router. When I did this, the disk was finally recognized. However I received a message from Airport Setup Utility that the external disk needed repair. (it had been formatted to a Mac OS Extended (Journaled) format previously).
I hooked up the external drive directly to my MBP with USB2 and reformatted/partitioned (1 partition) using the following: "Mac OS Extended (Journaled)" and the GUID partition scheme. (It should NOT be Master Boot Record (MBR).)
I then hooked the external back up to my Time Capsule thru my powered USB hub (it still would not show up using a direct connection) and I am able to see the drive fine now through AirPort Utility and able to archive directly to it. Hooray!
I hope this helps. Good luck!

External USB-hdd not recognised by Finder if connected to Time Capsule

Hello!
I'd like to connect a small external harddrive (40 GB) to my Time Capsule (1 TB) via USB.
I've read on http://www.apple.com/timecapsule/wireless.html the followings:
"... +And if you want to share both a printer and an additional hard drive, you can. Just connect a USB hub to Time Capsule.+ ..."
While I've connected two printers to Time Capsule - so I already use a USB hub - I've tried with the external USB-harddrive, but it wasn't recognised neither by the Finder, nor by the DiskUtility-app. The external USB-harddrive appears not even if I connect it directly to the Time Capsule!
Restarting the Time Capsule / USB-hub / external USB-harddrive / my Mac doesn't change anything
The external USB-harddrive appears only in the AirPort-utility app (5.4.2) in "manual Config" - "Devices", but even here only as a possible archiving device for the internal Time Capsule harddrive.
The USB-harddrive itself is formated as Mac OS extended (journaled) and it works like it should on my iMac (3.06 GHz, Mac OS X 10.5.7).
Do you have any idea why the external USB-harddrive doesn't appear when connected to the Time Capsule?
Thanks!
Regards,
Vlad

Vlad, this might help...
*Accessing External Hard Disk*
Open a Finder window
Select the Time Capsule in the Sidebar on the left.
Click "Connect As..." in the upper right of the window.
Enter the Name of your Time Capsule & its' password (Note: NOT your own Username & password).
Check "Remember password in my Keychain."
You should now see a blue share folder with the name of your Time Capsule.
Any hard disks attached to the Time Capsule’s USB port will also appear here as blue share folders. To mount them on your desktop double-clicking their blue folders. If you had a separate password setup for those disks in Airport Utility then enter that password if asked. Otherwise, it should now mount on your desktop.
Let us know if this solves your issue. If, however, the drive is not showing up either on the Desktop or the Sidebar, you may still need to do the following...
*On Desktop*
In the Finder, go to the Finder menu and select "Preferences".
Click “General” in the toolbar.
Ensure that all the items under "Show these items on the desktop" are checked.
Close the preference window.
*In Finder SideBar*
In the Finder, go to the Finder menu and select "Preferences".
Click “SideBar” in the toolbar.
Ensure that all the items under "Devices" & “Shared” are checked.
Close the preference window.
Did this resolve the issue?
As for Disk Utility, bear in mind that DU won't "see" network attached storage devices unless they are already mounted on the Desktop. And even then they are sometimes not "seen" by DU. If you are going to do any work on a network attached storage device avoid attempting to do it wirelessly. Best to connect it directly to the Mac (USB/Firewire), or at the very least via ethernet.
Hope this helps. Cheers!

X220: external USB keyboard not detected in BIOS

Hi!
I use an external USB keyboard attached to the port replicator of my X220. When Windows is booted the keyboard works without any problems. But I cannot use the keyboard pre-boot, e.g. to enter the HDD password after starting up, to configure the BIOS, etc.
I tried all USB ports both of the port replicator and the X220. The keyboard is still not detected by the BIOS (Version 1.20) and there are no BIOS options to enable "USB keyboard support".
Has anyone experienced similar problems? Are there any solutions to get the keyboard detected by the BIOS?
Thank you for your support!

@beastiesoft and earthartja,
If I am not mistaken, we are discussing this on the T series thread. Check here.
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T420-Not-recognizing-keyboard-before-OS-loa...
@someotherguy,
Drop you an email on this.
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD

Music stored on external hard disc not found after re-boot

I moved all my music onto an external hard disc becuase it was taking up too much space on my Mac. Now every time I reboot I get an error message saying music not found, please find. ie. I have to point itunes to all the folders on my hard drive again. How can I stop this happening?
Thanks for your help
imac g5 Mac OS X (10.4.5)

I followed other comments on the forum and succeeded. Thanks! -Migs

External USB Drive Not Shown in Finder... HELP!!!

After upgraded to the latest OS X Lion, external USB drives plugged to my macbook pro (named A) won't show anything. I've tried cmd+opt+r+p twice but no luck; however, i am able to see it in Disk Ultilities and Storage in About This Mac...
Another same macbook pro of mine (named B) did the upgrade and it is working just fine - external drive is shown as normal whenever plugged.
Help please because my daily work depends largely on document on external usb drive!!!???

I've surfed around already before having my problem posted here because it's so frustrated…
AnaMusic: I've tried that but it isn't worked
Eric Ross: it's checked
LexSchellings: I did run "verify disk" and "repair disk" -> but no luck… My hard drive isn't mounted to Lion as shown in status. Is it something to do with NTFS format? I came across some forum and read that Lion is design to natively support NTFS..
Are there any ways around???

External USB drive not recognized in OS X after rebooting from Boot Camp

Thanks in advance for any help. Here's the situation:
Everything works fine in OS X (10.5.2). In particular I have an external USB harddrive that I keep my iTunes songs on.
Then I boot via Boot Camp into Windows XP and play a few games. Then I reboot out of XP and back into OS X. At that point the external USB harddrive does not show up on the desktop. If I turn off the harddrive and turn it back on again, it shows up and is usable. I can continue to do that, but I would appreciate any advice on how to get the harddrive to show up when rebooting from XP (without requiring it to be turned off and on).
Thanks!

I've surfed around already before having my problem posted here because it's so frustrated…
AnaMusic: I've tried that but it isn't worked
Eric Ross: it's checked
LexSchellings: I did run "verify disk" and "repair disk" -> but no luck… My hard drive isn't mounted to Lion as shown in status. Is it something to do with NTFS format? I came across some forum and read that Lion is design to natively support NTFS..
Are there any ways around???

ExFAT external usb disk not working in Lion?

Hi, I used to be able to read/write to an external usb disk, exFAT formatted, using Snow Leopard.
Since upgrading to Lion I can't seem to be able to find the disk anymore on the desktop/finder. When I go into Disk Utility it sees it but thats pretty much all it will do. Anyone knows of this issue or how to fix it?
Thanks
Richard

I am encountering a similar issue where I can read but not write to an exFAT volume (connected over FireWire 800) in the Finder. While I don't know of a fix, opening a Terminal and using CP to move files seems to work.

Iomega external USB drive not working

Hello, I have a K8n neo4f board, 1.9 bios, AMD64x2 4400. For some strange reason my external USB drive doesn't work with this setup. I get i/o or insufficient resource errors, and the system will hang. This is puzzling since I have plenty of system resources available (2G ram), and my USB inputs work with other devices. I currently have a dvd drive, ir receiver,memory card adapter, and a cordless mouse receiver plugged in. All of these devices work flawlessly. There is nothing wrong with the external drive, it works with my Dell Inspiron 8200 Laptop. Is this a bios issue, should I upgrade to the latest 1b ? I'm hesitant of doing so, because of the horror stories I've read in this forum of systems becoming unuseable. Maybe someone with a similar problem can help me out.

Are you sure this is not software related .
Ref:
https://iomega-eu-en.custhelp.com/cgi-bin/iomega_eu_en.cfg/php/enduser/std_adp.php?p_faqid=16552&p_sid=7UzKoC4i&p_lva=&p_sp=cF9zcmNoPSZwX3NvcnRfYnk9JnBfZ3JpZHNvcnQ9JnBfcm93X2NudD0xOTgmcF9wcm9kX2x2bDE9MyZwX3Byb2RfbHZsMj0zNSZwX2NhdF9sdmwxPTUwJnBfcGFnZT0x&p_li=

WRT160NL Usb storage not recognized after firmware update

Hi.
I've been using an AC powered hard disk in my router for a long time, until i found the new firmware (Ver.1.0.04 Build 2), but after the upgrade the storage didn't work any more. (i don't remember the firmware version it had)
In the storage tab, in the configuration page i can see the disk, i can create sharings but these are not found in the windows network. (i'm using windows 7)
the disk has been tested using FAT32 and NTFS (232.8GB)
do you have a solution for this problem? or should i return to the firmware version it had (the one i don't remember)...
is there another version to switch to?
thanks for your help...
Solved!
Go to Solution.

Please kudo my post for if it solved your issue.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

External usb microphone not working with FaceTime and mac mini with os x Yosemite

Hello
When I try to do a phone call with face time through my iphone 6 face time is not recognizing my external usb microphone connected to my mac mini. I have just updated my mac mini to os x Yosemite. If I go to the audio system preferences and look to the audio input signal I can see that the external microphone (SB Omni Surround 5.1) is working (audio input level is showing an input signal).
Can someone help. I saw that this was also an issue in the beta versions of Yosemite.
Thanks.
BR Stefan

Interesting. I don't have a USB mic on the Mac Pro. Its the OLD FireWire 300 iSight. It works for FaceTime calls but not the iPhone call via the FaceTime app.
I also have 2010 MBP that works perfectly, even since the first Public Beta. I'm to sure if that mic is considered an external USB device or not, or if it has to do with device signatures vs. external or internal. I would almost assume that the built-in mic is on the USB bus. How would it be any different than the external USB.
I think I have to agree that this is a point release bug. I have submitted a bug report at bugreport.apple.com, and would ask others to do the same, or at least post to apple.com/feedback. The more noise we make through process the more likely to get a fix in the .1 release.

External hard drive not found when holding option key at startup

So here's the deal. My MacBooks DVD drive crappedmout. I opened up to check that the drive was hooked up correctly and all. Looked fine so I put it all back together and tuned on the Mac. My hard drive wasn't recognized so I Got the ? Flashing folder so I plugged in my external USB to run the disc utility and restore the hard drive (I have the startup discs on there as my dvdrom won't read anymore). Turned it on, held down option (with external plugged in and on) and the mouse came up to select what I wanted to boot from, but nothing showed up. I can't see the device at all. Keyboard seems to be working fine as well as the track pad. I also plugged in a USB mouse to check my USB ports and the mouse worked fine. Would love any help on this. Need the computer salvaged (hopefully) since I don't have the money to get a new one at current. Thanks for the help! (ps on an I touch if there are misspellings.)

Apparently, you unhooked something or other. Open it up again and check at the computing hardware forums for you machine. If still no go, then it's time to visit a repair station.

External USB Storage not found Lenovo IX2

Similar Messages

Maybe you are looking for