External vendor file system

Hello All
For sending a file to a file directory using File adapter, which is in external network (vendor System) in a B2B, where can we give the ip address of the vendor network?
Thanks
Ricky

Hi ricky,
You specify the business system for the communication which internally is connected to the technical system ,definitions of both are stored in SLD so when u specify the business system the technical system is automatically identified having an IP and u just have to specify th directory path for the file
Regards,

Similar Messages

Disk Utility can't format my external HD - File System Formatter fails

Hi. I have a Freecom 1.5TB external hardrive that is connected by firewire to my Intel iMac. The drive has worked fine for a year and then suddenly the "error 36 code" appeared and nothing else could be saved to the drive.
Disk Utility told me that it could not repair the disk and that I should format it. At this stage the problems start!
DU fails to format the drive with the error "File System Formatter Failed."
I have read various conversations on this error on these forums and followed the instructions but nothing has worked. I have already
1) Partioned the disk making sure it is "GUID" - then formatted and it still fails
2) Used MS DOS to do it but that also fails.
I have noticed that the SMART status is "not recognised".
Is there anything else that I can do or am I just doing this wrong? I am thinking that I might be able to do something using the start-up disks but I don't know how to do that and don't want to jepardise my iMac whichis otherwise working fine!
Any help appreciated.
Rob

I went crazy last night with the same issue trying to format my Toshiba external drive. I could format as MSDOS but not Mac journaled. I tried the guid partition scheme etc... no luck. Then I read somewhere that Leopard has an issue with the partitioning schemes. I hooked it up to my macbook on Tiger and whalla, formatted no problem. Then I was able to hook it up to Time Machine and let it reformat it on my Snow Leopard version of OSX on the iMac. I'm on OSX 10.6.8.

My Macbook Pro can't detect or read my CDFS file system external HDD

My Macbook Pro can't detect or read my CDFS file system external HDD

Open Disk Utility and see if the USB drives show in there. If they don't then it is a USB port or bus problem. If they do show in disk utility are they formatted in either Mac extended or a Windows format?

What is the best way to copy aperture library on to external hard drive? I am getting a message that say's "There was an error opening the database. The library could not be opened because the file system of the library's volume is unsupported".

What is the best way to copy aperture library on to external hard drive? I am getting a message that say's "There was an error opening the database. The library could not be opened because the file system of the library's volume is unsupported". What does that mean? I am trying to drag libraries (with metadata) to external HD...wondering what the best way to do that is?

Kirby Krieger wrote:
Hi Shane. Not much in the way of thoughts - - but fwiw:
How is the drive attached?
Can you open large files on the drive with other programs?
Are you running any drive compression or acceleration programs (some drives arrive with these installed)?
Can you reformat the drive and try again?
Hi Kirby,
I attached the UltraMax Plus with a USB cable. The UltraMax powers the cable so power is not an issue. I can open other files. Also, there is 500GB of files on the drive so I cannot re-format it. Although, I noted I could import the entire Aperture Library. However, I do not want to create a duplicate on my machine because that would be defeating the purpose of the external drive.
Thanks,
Shane

The problem is encountered when we try to open the file from external vendor.

We are using Adobe illustrator CS3 with Patch 13.0.2. in MAC PC with OS 10.4.11. We tried to open the file generated from external vendor. This file is made by CS4/CS5 & downgraded to CS3 because we are using different version of CS package.
When we try to open such as file. It takes some time to open it. But after a while, the application illustrator has unexpectedly quit & crash report is generated. Any expert can help to look at the problem.

Just a bad file.
No telling what specifically may be the issue without seeing the original file as compaired to the CS3 file.

File system notification if file is open by external application

Hello!
I have an application in which a certain temporary file is generated. This file is then loaded by an external web browser. When the browser finished loading the file, I want my application to delete the temporary file. Unfortunately my app is not notified correctly by the browser when loading is complete. I guess this is because the temporary file is not interpreted by the browser itself but by a browser plugin.
So my plan to delete the file when the browser completes loading can't work. Thus I wonder if there is any way to get a file system notification when the file is opened by the browser plugin and when it is closed again.
The whole thing should work for Windows XP. I've searched the whole day but couldn't find an appropriate solution. I search for something like the FileSystemWatcher in .NET. But I even don't know if Windows fires these events when files are opened or closed.
It would be great if someone could help me although it seems to be very tricky.
Thanks in advance,
Robert

This forum is about program development in C, C++, and Fortran, and particularly about using Oracle Solaris Studio.
Questions specific to Solaris are more likely to get a helpful answer in a Solaris forum. Start here:
https://community.oracle.com/community/developer/english/server_%26_storage_systems/solaris

External Tables to Unix File System 10G R2

Can anyone help with setting up an external table that reads a flat file from a Unix File system.
I have sampled a file ok and created an external table and deployed it to the database ok but it can find the link through to the unix file system to read the file.
I created the location as an FTP type and have referenced the path to the relevant directory /oracle02/app/OWB_files when creating the location. I have placed the relevant named file in the directory but when i try to look at the table in TOAD i get the following errors
ORA-29913 error in executing ODCIEXTTABLEOPEN callout
ORA-29400 data cartridge error
KUP-04040 files 121123_PENS.txt in MLCC_FILES_LOCATION_0 not found
Does anyone have a step by step guide for creating these and am i doing some thing wrong. Is choosing the FTP type in the location correct and is the path specified correctly. I can see much information on thisin the manual!
Your assistance would be appreciated

HI,
You make sure that, the path should be shared one. We can do this using samba server.
Regards,
Gowtham Sen.

File system external data upload

Hi experts,
Is there any tool like File system external data upload, to upload the data from the why is it used what are the attributes to be given.

go thru this
http://confluence.atlassian.com/display/CONFEXT/MultipleAttachmentsUpload+Client

Images in the folders of an external file system KM

Hello,
We are facing a problem in our KM, the thing is We have created a external file system in our KM, it is green and almost everythings is working fine... In the CM repository we have assigned the "properties" as a repository services, but in the setting of our folders we can not see the tab of rendering within the properties.
This is our problem without this tab of rendering We can not assign a image for this folder .. And We need to assign imaged to the folders.
Does anyone know whether we need to add new repository sevices to our file system ? or it is impossible to assign an image to a folder in a external file system within the knowledge management.
Thanks in advance.
OLAF

We have found the reason why we did not have the rendering option for assign images to the folder in a external repository.
Our guess was good, We should have added a new "repository services" called "layout service".
Thanks for reading this.

HELP!: How to read and write to External hard drives? What file system to use?

hey all, this has been really frustrating for me today. i want to be able to write to an external HDD that's formatted in NTFS. today i find out it isn't possible to write to this file system on a Mac and that on FAT32 it is possible. however, FAT32 can't address files larger than 4GB so this hurts me a lot. are there any other file systems that'll allow me to read and write from a Mac? my goal was to use freeNAS to build a NAS with an old tower and connect my external hard drives to it, but if i can't write to them this may not be possible.
thanks guys, i'd appreciate any help!

Read this, you don't need to install any software unless you have no choice.
https://discussions.apple.com/docs/DOC-3044
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

Trying to make a iPhoto Library on my external hard drive but I get "the library could not be opened because the file system of the library's volume is unsupported.

Trying to make a iPhoto Library on my external hard drive but I get "the library could not be opened because the file system of the library's volume is unsupported." I reformatted my hard drive to ExFAT because I want to be able to use it on PC and MAC.
iOS: 10.10.1
Mac Book Air
External: WD 500 GB recently reformatted (no files on it currently)

The iPhoto library must only be on a volume formatted Mac OS extended (journaled) - it can not be on any other format drive
LN

Windows NT file system External HD - Will it work on a mac?

I have a USB external HD that is formatted as windows NT file system. When i plug it into my imac, it shows up on the desktop, but i cant see or access any files on it. What gives? I know i could re format it for mac, but i dont want to lose the 70 gb of files on the drive. Is there any way to make this work?

Hi and welcome to Discussions,
while OSX itself is capable of read-only access to NTFS file systems, it seems to have sometimes problems with it.
I am not sure if this is a 'permissions'-problem or something related to some 'special features' of NTFS (like ADS Alternate Data Streams).
http://en.wikipedia.org/wiki/NTFS
However you can try to use either NTFS-3G http://www.ntfs-3g.org/ or buy Paragons NTFS for Mac OSX http://www.paragon-software.com/home/ntfs-mac/
Regards
Stefan

HELP!!! i formated a external hdd to MAC os Extended file system

HELP!!! i formated a external hdd to MAC os Extended file system in disk utility and now i need it formated back to work on pc. i have tried ms-dos file system under the erase tab and it doesnt work, on my pc all it has under my computer is black, but if you go down by the time you can "safely remove hardware" but it dosent give a drive location (ex: e:/)....
the external hdd is a seagate go 250gb usb

Use the PC to reformat the drive.

Using an External Drive with a ReiserFS File System

I hope this is the most appropriate place to ask this question.
I am looking at adding a SimpleShare NAS device (Made by SimpleTech) to my home network. I am told that the hard drive uses the ReiserFS file system (which is a Linux file system). Two questions?
Does anyone have any experience with the ReiserFS file system? Does it play well with OS X?
Anyone familiar with the SimpleShare units? Any feedback good or bad?
Thanks for any suggestions.
David

After doing some research I determined that ReiserFS is a journaled Linux file system and having started to use it, it is working well on the network.

How increase external disk size used for an existing file system, Solaris10

Configuration:
Server: Sun T5220
S/O: Solaris 10 5/08 s10s_u5wos_10 SPARC
Storage: EMC AX4-5
EMC PowerPath: PowerPath Version 5.2
I have the following scenario:
In AX4-5 storage array, I created two LUNs into RAID Group 10, with Raid Type1/0:
LUN 101: 20Gb
LUN 102: 10Gb
Both LUNs were added to Storage Group (SG1) that includes two Servers (Server1 and Server2); both servers have Operating System Solaris 10 5/8 and Power Path.
The servers detect both LUNs across two paths. With Power Path were created a virtual path (emcpower0a, emcpower1a) to access to each LUNs respectively.
We have mounted two file system /home/tes1 over emcpower0a -> LUN101 and /home/tes2 over emcpower1a -> LUN102.
Filesystem size used avail capacity Mounted on
/dev/dsk/emcpower0a 20G 919M 19G 5% /home/test1
/dev/dsk/emcpower1a 10G 9G 1G 90% /home/test2
I want to increase the space in file system /home/test2, without lost the information that I have stored and using the same LUN, LUN 102. To do this I start with the following steps:
1- Create new LUN, LUN 103 with 15Gb into RAID Group 10. Result: OK, I have available space in RAID Group 10.
2- Add LUN 103 to LUN 102, using concatenation option. Result: OK. This action creates a new metaLUN with the same characteristics of LUN 102, but with new space of 25Gb.
After to do these actions, I want to know how Solaris recognize this new space. What I need to do, to increase the size of file system /home/test2 to 25 Gb. Is that possible?
I reviewed the description of each disk using format command, and the disks not have any change.
Could anyone help me? If you need more detail, please do not hesitate to contact me.
Thanks in advance.

Robert, thank a lot for your know how. You helped me to clarify some doubts. To complete your answer, I will add two more details, based on my experience.
After to execute, type -> auto configure and label, the disk was created with different partitions like root, swap, usr, like this:
Volume name = < >
ascii name = <DGC-RAID10-0223 cyl 49150 alt 2 hd 32 sec 12>
pcyl = 49152
ncyl = 49150
acyl = 2
nhead = 32
nsect = 12
Part Tag Flag Cylinders Size Blocks
0 root wm 0 - 682 128.06MB (683/0/0) 262272
1 swap wu 683 - 1365 128.06MB (683/0/0) 262272
2 backup wu 0 - 49149 9.00GB (49150/0/0) 18873600
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 usr wm 1366 - 49149 8.75GB (47784/0/0) 18349056
7 unassigned wm 0 0 (0/0/0) 0
This was not convenient because all information stored appear in the first slice and growfs not work if appear root or swap slice into the disk, for that reason was necesary to recreate manually every slice with partition command. The final result was this:
Part Tag Flag Cylinders Size Blocks
0 unassigned wm 0 - 49149 9.00GB (49150/0/0) 18873600
1 unassigned wu 0 0 (0/0/0) 0
2 backup wu 0 - 49149 9.00GB (49150/0/0) 18873600
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
Now, execute again the label command to save the new information.
Mount file system and execute:
growfs M file_system mount_point to expand the file system to 9Gb.

External vendor file system

Similar Messages

Maybe you are looking for