External VGA connection for N80

Hi,
I need an external vga connection for my N80 to make presentations using a projector.
Any ideas, Nokia or 3rd party products are all welcome.
Thx, ML.

I think jive is used in webcenter discussions?
You may have the wrong forum... this is for Webcenter Interaction Products.
For help with Webcenter Discussion, blogs, and wiki's (part of webcenter services), you want to ask your question here:
http://forums.oracle.com/forums/forum.jspa?forumID=733

Similar Messages

BW external DB Connect for MS SQLServe

Hi Gurus,
can any one guide on BW external DB Connect for MS SQLServe
regards
kiss,

Hi,
Please check this Note 512739 - BW external DB Connect for MS SQLServer.
[Transferring Data with DB Connect|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2f0fea94-0501-0010-829c-d6b5c2ae5e40]
Hope this solves your problem.
Regards,
Muralidhar

DVI or VGA Connection For Sharp Aquos??

I've got an older Sharp Aquos, specifically the LC37G4U. Previously owned a Mini G4, 1.42 GHZ. The best I could do imagewise was with a DVI connection and the Aquos and Mini set to 1280 x 768. This resulted in an image cropping of approximately 1/2 inch on the right and left sides of the screen. I lived with it for a few years. I recently upgraded with a sweet Mini Duo Core 1.83 GHZ, 2 Gig of RAM, 7,500 RPM Seagate HD, etc. The computer is great, but with the DVI connection, it appears to default to the old 1280 x 768 setting, with the same exact image cropping. The maximum resolution on the LCD is 1366 X 768, and I'd like to attempt to do better as far as the cropping goes. Has anyone out there tried the VGA connection alternative? Or if anyone has any ideas, I would be forever in your debt. Thanks All!
Mac MIni Duo Core 1.83Ghz, 2 gig, etc. Mac OS X (10.4.9)

I have a sharp lcd tv as well, and as far as I know, if you connect the mini to it using DVI (you shouldn't really use anything else) the mini will default to the tv's resolution. I swap my mini from monitor to tele depending on what I'm using it for, and everytime it automatically fixes it's display settings to match whatever is connected to it. Hopefully this is the case for you too, try it out.

External LDAP connection for Jive forum webcenter Discussion

Hi All,
We could successfully configure external LDAP with Webcenter Discussion forum. In turns Jive forum.
Problem we are facing : It is authenticating for display name instead of actual userid.
EX:
John Paul (display name)
[email protected] (email id)
John.paul (userid)
It is accepting John Paul as username instead of john.paul. This is issue as there can be duplicate display names.
Which parameter and where to configure to make sure Authentication is done for userid only.

I think jive is used in webcenter discussions?
You may have the wrong forum... this is for Webcenter Interaction Products.
For help with Webcenter Discussion, blogs, and wiki's (part of webcenter services), you want to ask your question here:
http://forums.oracle.com/forums/forum.jspa?forumID=733

Satellite Pro U200 - External VGA monitor does not show any output

I have bought this device as used from ebay. It is working fine except that the External VGA connection does not work. I am using win 7 and have it does recognize the external display correctly and I can configure it as an extended display. However the external display does not show anything. The external VGA monitor is fine as it works with other Laptop machines. I have tried using UBUNTU Live CD on this machine and tried to make the external display work (and it can also recongize the external display and configure it) but there is no picture. I also connected the external display to the vga port and then re-booted the machine but still no picture. I have tried changing the bios settings for the display as well but all my actions point to a hardware fault.
I am not sure if it is a manufacturing fault ? Do you know if this issue has been reported earlier to you. Is there a product recall issued for this?
Please advise as I need to connect this external display but am sure that it is a hardware fault with your device.

Hi buddy,
Have you already tested it with factory settings? I mean the preinstalled Windows from Toshiba with all drivers and tools. If you have the Toshiba recovery disk you should boot from this disk and install Windows with all drivers and tools.
Furthermore you can switch between external and internal monitor using FN+F5 key combination. Does this work?

Satellite A100 display blank but external vga works

Hello,
my two year old Satellite A100-847 display stopped working. I used external VGA monitor for a few days,
then switched back to laptop LCD and found out it doesnt work. It doesn't show anything , only the grey backlight.
The LCD doesn't work even at boot nor does in WIN XP, nor at battery power or AC. I have tried to dismantle the display according to some guide
to check if the signal cable is firmly at its place in the connection to LCD, but it hasn't solved the problem.
I use the original BIOS and somewhat updated nvidia display driver, they worked fine up to now, so I suggest its not a bios/driver problem.
(but maybe it is, so I tried to install original display driver with no effect. I dont want to try to flash new bios, and end up with f....ed up display and bios too)
The video output to external monitor is completely fine, from boot or in win.
Does anybody see a solution, please? Or should I only go to service provider...
thank you
Pepe

Hello
In my opinion you should definitely go to the nearest Authorized service provider. They can say for sure what the problem is and, of course, order by Toshiba the right part for exchange.
It is definitely hardware issue and it can be the FL inverter, especially if you see the something on the screen but almost black and grey.

How can i get a VGA connection? I cant find the right cables?

i wish to get a VGA connection for a Projector or stuff like that? I looked on the apple site for a cable but cant find one that has the right port for my computer... any ideas? i have a new Macbook Pro.

Hi tjk,
I am taking advantage of clump´s post, but I have an issue with the following. I looked in my local retailer recently for a DVI to HDMI adapter... but they are out of stock. I need to plug my MacBook Pro to my TV, and then I have a DVi to VGA adapter, and my TV (Sharp Aquous LCD) has an analog PC connection. I tried to see my desktop in the TV, but the TV is not recognizing the Mac... do you if it is feasible to have the TV recognize the Mac through a DVI to VGA adapter?

External VGA Projector Screen Blue when MacBook Pro Connected

I love using my laptop for Powerpoint and Keynote presentations at work. I used to have a Powerbook 1.5GHz 15" and now have a MacBook Pro 2.2GHz 15". With some external VGA projectors, after connecting the MacBook Pro, everything works great. I turn off mirroring and my presentation goes smoothly.
However, with some particular external VGA projectors, I get a connection problem. After using my DVI-to-VGA cable to connect my MBP to the projector, nothing happens. The projector continues to project a blue screen as though nothing is connected to it and as though it has no video source. I've cycled through the projectors input selections hoping the projector would find the signal but still nothing. I've even restarted my MBP with the cables attached to the projector and still the projector shows a blue screen.
My friends can connect their PC Windows XP and Windows Vista computers to this same projector with no problems. I used to have this same problem with my PowerBook G4 which is one of the reasons I upgraded to the new MBP hoping this problem would be resolved. What's wrong and what can I do to get my MBP compatible with the external projector?

Sorry, I meant the cable that links between the connector and the input to the projector (RGB - IN by the way, not OUT).
We have a number of these VGA cables at my place of work that will work with a PC but not a Mac. Some are fine. My technician holds on to a cable for me that we know works and if I get a bad one, he brings in the replacement and it takes a few seconds to go online. I also note that some of the projectors (particularly ceiling mounted ones) have an additional adapter between the cable and the projector. It may be that some of the pins are not connected.
Of course, if the projector is mounted too high, that would not allow easy replacement.
I would suggest finding a cable that works and carrying that around.

Connecting to external VGA Monitor ?

Model: HP ENVY TouchSmart 15-j052nr
My laptop doesn't have VGA port and I didn't realize this when I bought this laptop. Can any suggest how to connect my laptop to external VGA Dell monitor ? Some forums are saying you can buy USB to VGA cable or HDMI to VGA cable but at the same people are complaining it is not working. Can someone give good information and links to cables or adaptops that WILL WORK for sure with this laptop.
This question was solved.
View Solution.

Hi,
HDMI to VGA cable won't work, you need a converter to convert from digital to analog. The following device is one example:
http://www.jaycar.com.au/productView.asp?ID=AC1638
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Connecting 2 external VGA monitors to an E535

I already have one external VGA monitor connected to my Thinkpad E535 via the VGA port.
What is the best way to connect a second VGA external monitor?
Should I use a VGA-USB or VGA-HDMI converter?
Do the converters need to have their own graphics card or can the E535 built in graphics card deal with 3 (laptop + 2 external) monitors running simultaneously?
Thanks for any help! R

Hi,
To get a third independant Display you need something like this...
http://eshop.macsales.com/item/NewerTech/VIDU2DVIA/

I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extrem. How do I get Itunes to search for the music here with out trying to copy it to my laptops hard drive??

I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extreme (2 TB drive plugged into the USB port). I see the drive on my laptop and I can add and delete files no problem. How do I get Itunes to search for the music here with out trying to copy it to my laptop's hard drive? I don't have enough space to do that.

How did you move the music to the external drive? What exactly is on the drive? The entire iTunes folder or only music? If it is the entire iTunes folder you can do the option+start suggestion earlier. If you copied only music and did so by dragging it there then you need to delete it again and consolidate/organize it there instead so iTunes tracks the move. iTunes 12 for Mac: Change where your iTunes files are stored - http://support.apple.com/kb/PH19507

I want to use the Thunderbolt connection for an external hard drive

I want to use the Thunderbolt connection for an external hard drive - so what port would I use on the MacBook Pro 13" for the display monitor. Thank you!

This is not the forum for MacBook Pro owners.
You just need to reformat the drive in Disk Utility and erase the drive and have Mac HFS.
If you did need to use NTFS then you would not want -3G but Paragon NTFS for OS X x. 10.0
Or buy something that isn't pre-formatted to Windows NT file system.
First though make sure you have backups of your system. TimeMachine being used now?
http://macperformanceguide.com/Mac-TimeMachine-drive.html
http://www.apple.com/support/timemachine/
Maybe cleanout some files you don't need.
Install a larger notebook hard drive even.
http://www.macsales.com/firewire has a lot of choice in Mac compatible drives and enclosures so you don't need to worry about Fantom not working at some point.
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard

I bought an external hard drive for backups to use with Time Machine, but however when I try to connect it with the other windows laptop it doesn't work ? intact it doesn't work on any other device except my MAC ?

I bought an external hard drive for backups to use with Time Machine, but however when I try to connect it with the other windows laptop it doesn't work ? intact it doesn't work on any other device except my MAC ?

Do not worry about it.
Time Machine needs that your external drive is formatted in HFS+, or better known as "Mac OS Extended (Journaled)". This filesystem is used by Apple on Macs and Windows cannot read or write drives formatted with this filesystem, being this the reason why all your devices do not read the external drive except your Mac.
You can only use your external drive to make Time Machine drives. If you store anything different, you may damage the Time Machine structure, so it is better not to use it as a drive to store other data. Instead, get another external drive to do it or create a second partition on the external drive formatted in FAT32 by using Disk Utility > http://pondini.org/OSX/DU3.html FAT32 can be read by Windows PCs

Minimum connection for external hard drive

Hopefully this is the correct subdepartment for this question.
I'm shopping for an external hard drive to which I'll be saving and storing movies and digital videos. The playback method will be a Powerbook G4 (15-inch FW800 1.5GHz) running DVD Player connected with composite cables to a TV -- any TV.
I'm searching for best value in terms of GB per dollar in the 300GB range. There are so many variables, but I think connection type is biggest factor. Are the USB 2.0 drives fast enough for what I need or would FW800 be a more reasonable minimum? Are there other more important factors?
2GHz Mac OS X (10.4.4) 23"17"PB15

Here's a portion of what I posted to a similar question. First, regarding FW400 vs FW800, if I were going to be reading data off a FW connection for immediate usage as you described, I'd want to use the fastest connection possible, FW800. From the other post....
A Western Digital 320 gb external enclosure (USB/FW 400) goes for around $200. However, all have one year warranties.
Another option, assemble your own, requires the hard drive and case: A 320 gb Western Digital, with a 5 year warranty, 7200 rpm ultra ATA interface (you can't use a serial ATA interface with a pre-Oct PB), cost for the drive around $140. They also make drives for a few bucks less with 3 year warranties. I prefer Western Digital drives over Seagate drives, as I've found them to run cooler.
Add a Rosewill RX30 external case (includes power supply and USB/FW 400) $60. This brushed aluminum case looks like it was made to sit right next to our PB's (I've got one). You can see it at their web site at http://www.rosewill.com/product/product.aspx?productId=80 or also at Newegg at http://www.newegg.com/Product/Product.asp?Item=N82E16817173003. So for $200, you can have a 320gb hard drive with a 3 to 5 year warranty, and a stunning case. If you want, the Rosewill case also comes with FW800 for another $35.
Assembling it is very easy - you can read the directions on Rosewill's site at http://www.rosewill.com/RosewillSoftware/RX30_eng.pdf , for example. You disassemble the case by taking out 4 screws on the bottom of the Rosewill case, plug the included plug into the hard drive, secure the hard drive with 4 screws to the case, and reassemble it.

HT202807 I have a MB Air 128gb and a Time Cap.802.11AC. My HD is maxed out because of 30GB of photo storage after migration to 10.3.3 Photos. Please recommend an external drive best for connecting to TC and moving the iPhoto Lib off my HD

I have a 13" mid 2011 MB Air 128gb and a Time Cap.802.11AC. My HD is maxed out because of 30GB of photo storage after migration to 10.10.3 Photos. I have reduced apps and files as much as possible so the only thing left is to move the photos. Please recommend an external drive compatible for connecting to my TC 802.11ac and moving the iPhoto Lib off my HD which will free approx 15 gbs. of space. I don't plan on using it for any other purpose so a small capacity drive will suffice. I know the "optimization" is supposed to adjust for this condition but I don't trust that assertion.I only have 2gb free space remaining.

I don't plan on using it for any other purpose so a small capacity drive will suffice.
If you really only want such a small capacity drive.. what about just buying a 32GB or 64GB USB memory stick.
You should still have a back up to the internal hard disk of the AC TC.
Or just buy a WD Passport.. don't waste your money buying 500GB as it is only a bit more to buy 1TB and a bit more again for 2TB.. For future use if you do buy a USB hard disk buy 2.5" type.. and buy 1TB or if the budget stretches 2TB..

External VGA connection for N80

Similar Messages

Maybe you are looking for