External video headache

Hi.
I'm New to putting video in flash. The problem is that when
previewed the video clip ( which I choose to be a progressive
download) will not start unless the playhead on the video timeline
is moved down a bit.
The video clip is part of a movie clip not part of the main
time line.
I think it may be caused by action script in the main time
line giving a stop command because the movie clip will play from
the start up until the stop command occurs if i have set the movie
to play automatically.
Is their a way to pause the playhead on the man time line
that will not stop my streaming video as well?
Hope that is clear. Would appreciate some ideas
greatly.

Don't know what's up, then. If you have the MIDI input set to the same controller in your channel strip inspectors for both the software instrument and the external instrument, they should both respond accordingly. You could try creating a new, fresh Concert, and just add a single software instrument and external instrument and try, just in case something is corrupt or fubar.
To be safe, you could make sure your external controller is set up correctly in audio/midi setup.
Also, you could try the same basic config in Logic and see if all works correctly....

Similar Messages

Problems with external video

Hello,
I am trying to record video to my mini DV camera, something I have done many times before, and for some reason i can't!
My settings are all as they should be (or so I think) in NTSC 24, view all frames. The computer does recognize my device. I even have tried to capture and it does it. It plays, it just won't record.
The most annoying thing is that the camera monitor does show a still frame from the video in FCP but when I press spacebar (am trying to record from playback) it doesn't play the video only the audio then when I stop it it shows another frame again.
I have 512 RAM. Too little, I know, but like I said it has worked before and it should work again.
I'm getting a headache, any help is welcome
thanks
IBook G4 Mac OS X (10.3.5)

The External video has been in 'all frames' from the start.
I also tried the resizing but didn't work.
The very strange thing is that I can see the images in the camera when I move the playhead in the Timeline. But after pressing space bar the image freezes in the camera even if it plays in the canvas.
I know it must be something simple, I just can't figure it out.
thanks

HT3413 can I connect my new 15" macbook pro to 2 external video monitors?

can I connect my new 15" macbook pro to 2 external video monitors?

Not without an adaptor such as those from Matrox.

Timeline and External Video issues

Have an issue with output. My external video is not showing up to play from the timeline. I am getting neither audio or video. Have checked all firewire ports, used 2 different monitors, 2 different decks, 2 different firewire cable and even tried it without the external hard drive. It shows in the view menu that all frames are checked and the output is set to the correct monitor. Refreshing the external devices does not work either. Ran FCP Rescue. Still did not fix the problem. The Canvas window is sized to fit in the window. Capturing video and audio works great. Just output and monitoring it while editing. Can I get an answer. It is the latest FCP, 6.0.2. Is this a problem with the new quicktime 7.3.1?
This is an emergency. Any help would be appreciated.

You can't monitor SD without a 3rd party card.
Perhaps you mean the material is DV?
You don't send DV material directly to a monitor - you send it out via firewire to some sort of DV/analog conversion then to a monitor.
Perhaps your post was not clear?
x

Can I connect an external video camera to a mac book pro for viewing live video so I don't have to use the little screen on the camera?

Can I connect an external video camera to a mac book pro for viewing live video so I don't have to use the little screen on the camera?

Shadow30 wrote:
Can I connect an external video camera to a mac book pro for viewing live video so I don't have to use the little screen on the camera?
• Only if your video camera supports it. Depending on how your camera works, you may need to add preview software to your Mac to use this feature.
• Alternatively, your camera may also be able to record directly into your Mac while you are monitoring the Mac's display.
• If you are using a consumer camcorder that supports HDMI monitoring, a small HDTV might be an simpler solution than your Mac. For an example of how this is done, see http://youtu.be/GVpSkZD6qE4.
• The retailer who sold you your video camera may have other suggestions.
• If you need more professional results, an external preview monitor will offer more capability on compatible cameras.
Message was edited by: EZ Jim
Mac OSX 10.9.4

Print to vide/External video not working in FCP, PLEASE HELP

I have the FCP HD 4.5 and am having difficulty communicating to my Panasonic PV-800. Capture is great, but when trying to view external video or print to video, the default blue screen of my cameras vtr mode is distorted and no video comes through. I have refreshed AV devices and have check all frames in the external video menus. When i pause the playback, the still frame appears on my camera, then if i resume playback, the video does not come through, but only distorts the blue screen. I made sure the settings were correct and even found an apple site that told me to copy two plugins from the FCP CD, and i did that. I also did the quicktime fix where u delete the reciepts and download the latest version of Quicktime, still same videoless situation.
I feel like i've tried everything. Please if anyone can help, i gotta get something printed to video soon!

after doing everything it was:
Shutdown everything, power up connected camera, power up external drive, power up computer, launch fcp, and it worked. I dunno if the restart was a part of the process of one of my other things that i did or whatever. Maybe that's just how my computer reacts. Anyways, hope that helps anyone frustrated.

Linking to external video in Captivate 7

I develop video-based training. Each slide includes mostly video. I've been successfully embedding f4v videos into Captivate projects for some time but video quality and file size issues make it necessary to begin linking to videos on external servers.
I've tried a number of options without success.
I create a video event, choose the url option, and add the url from the uploaded video. The only usable server choice is the Adobe Media Streaming Service. I've tested the videos on different servers including Amazon since the troubleshooting advice alerted me that only Adobe partners servers will be recognized. The project previews and the progress bar moves as if the video is playing but only the background file is visible. I tried all the preview options - no luck.
I decided to try the YouTube widget. I uploaded test videos to YouTube, inserted the Interaction widget and added the url, etc. This option results in a successful preview only when I choose the html 5 output in web browser option. Captivate will successfully publish the project but I get "Java Script Error unable to acquire LMS, API content, may not play properly" messages.
The published file performs like all of the unsuccessful previews. The file loads and acts as if the videos are playing in that the progress bar moves but there is no video, just the slide background image. I tried different output settings like just SWF, just html5, both SWF and html5, different versions of the flash player, etc. I also added the output folder to the Flash Global Security settings in case it was a permissions issue.
I'm working on a mac so I emailed a zipped file to my PC and tried to open in Internet Explorer to see if the file might play on a different system or browser - same outcome - no luck.
Making external video work is critical to my work and use of Captivate so I'm hoping there's something I'm missing or misunderstanding about what I need to do.
Any help or advice will be appreciated.

I'm continuing to have problems with the YouTube widget. My client sent me YouTube links and when I copied and pasted the new links into the Captivate file and the published and uploaded the file, the links didn't work.
To review, I uploaded video files to YouTube and used the interactions widget to insert the linked videos. The videos which I uploaded can be previewed in html5 in web browser but not in any other way. When I publish this file and view the file on my system on my browser (Safari) the file opens but the videos do not play. However, when I upload to my ftp site and open the file from there, the linked YouTube videos play.
So this led me to believe that I have a file that will work at least in html5 output. But when I replace the original YouTube links that I uploaded with new links provided by my client the videos preview in html5 in web browser mode but do not play on my system or when uploaded to my ftp site. All of the videos (mine and my clients) play in YouTube and preview in html5 mode.
Additionally, when I ouput the html5 file, the quiz doesn't work properly. The radio buttons don't appear on screen so when answers are selected the user has no way of knowing their selections have been accepted. Oddly, the quiz is registering answers since when you submit there is a brief flash during which you can see the buttons but they quickly disappear and results are tallied accurately at the end. But the quiz is unusable without user feedback for selections. You can view this performance beginning on the sixth slide (the beginning of the quiz).
http://videoactive.org/PreventingObesityOnlinelinks/index.html
Are html5 output files compatible with Learning Management Systems? Is there a way to use the YouTube widget in SWF output files?

Can I have an external video source run in a window instead of using the full display?

I'm aware that the 27" iMac models are capable of accepting external video sources, but I'm wondering if it's possible to have an external video source run in a window on the desktop, rather then use the full display. Does anyone know if there's any software I can download to allow this, or will I have to purchase a special capture device?

hat I DON'T WANT TO OPEN the window application FROM the Labview VI BUT IN the Labview VI. I think it's possible to do that and to do communicate the OpenGL application with the Labview Interface using an ActiveX but I don't know how. Can someone help me ?The desired behavior you desribed may not be possible with that application. In general LabVIEW does not offer a window object that other standalone applications can run it. The closest thing is the ActiveX container. If the programmers for your application created an activeX control of your program and they provided documentation, it should be pretty easy to incorperate the app and labview into one window. I recommend contacting the manufacuturer of the app to see if they have an activeX control version of the app.

I want to create an external video widget with iAd. I followed the steps and copied the Url and paste it in the Video pop-up menu in the Properties section of the inspector. When i select 'preview' the video doesn't play and the Url that i pasted is gone.

i want to create an external video widget with iAd to use in an iBook. I followed the steps and copied the Url and paste it in the Video pop-up menu in the Properties section of the inspector. When i select 'preview' the video doesn't play and the Url that i pasted is gone.
hope someone can help!

May have something to do with whether or not the URL can be reached while building your widget. I've got a video on the web. When I enter the URL into the field for the video object and click to another field, the URL is replaced with some text indicating that it is accessing the video then updates itself to displaying just the name of the video file.
It shows just fine in preview and I can see the full path to the video when I export the widget so it should work for you.
Is the video accessible from your Mac while you're laying out your widget?
-Mark

Problem With External Video

I am currently running Final Cut Pro 5.1.2 on OS X 10.4.8. I am having some serious issues trying to get Final Cut to display the timelines video out to my TV. I have my Canon GL2 connected via FireWire, and set it up so the DV input plays as the audio/video. It then goes out to the TV via some standard RCA jacks. I have done this before, no problem.
The settings are as follows:
External Video: All Frames
Video Playback: Apple FireWire NTSC (720x480)
Audio Playback: Audio Follows Video
Sequence Preset: DV NTSC 48 kHz
Capture Preset: DV NTSC 48 kHz
Device Control Preset: FireWire NTSC Basic
If I turn the camera off, the output shows it as 'missing'. I can import using the camera so I know its connected correctly with the FireWire. I can see playback on the TV if I watch the tape, so I know that too is connected correctly.

Its funny you should reply, I was just looking through my posts, and was reading a response you left months ago when I asked a question, then I came back to this post and there you were again! Thanks, I fiddled with the camera for a bit and finally did something to get it to show up. Marked as solved.

TS1846 external video all frames

When I'm editing my video in Final Cut Pro 7, the external video Video freezes, I only hear the audio. To try to solve, I click on View> External Video> Refresh A /V Devices and nothing changes. Canvas in the program, the video runs normally.

Freezing or skipping during playback can be caused by any number of things, or by a combination of things:
1. Using media that doesn't work natively in FCP. Video formats like H.264 (and many others) should be converted prior to importing. Look in FCP's list of Easy Set Ups to see which formats are native to FCP.
2. Effects added to clips exceed your system's real time capabilities. Render the Sequence fully then try playback again.
3. Storing media on the boot drive or a USB drive.
4. Having less than 20% free space on the capture scratch volume and especially on your boot (system) drive.
5. Playing the Timeline with the Canvas window set larger than 100% or "Fit to Window," whichever fits best without scroll bars.
6. Having too many overlays activated in the Canvas window (Range Check, Title Safe, etc).
There may be other contributing factors as well, but those are the most common causes.
-DH

External video monitor not supported?

I started to use color APP just recent and soon found out that Color does not support live preview to my external video monitor via Firewire, I have 2 devices to choose, DSR11 or a DAC 10 ( DV Converter ), firewire to Component.
I hope that Apple resolve this issue fairly quick, many color users like me that don't have an IO card like AJ Kona or Decklink, color will be useless without an external video monitor for color correction.
Any input will be appreciated.
Sigi

Because of the reduced colorspace required for DV, I'd wager it's unlikely that Color will ever be made to go out via FireWire to a DV deck or DAC.
Decklink Intensity - $249 or $399? is a potential alternative...
Patrick

Scrubbing problems with external video turned on

I recently upgraded to Tiger and using FCP vers 4.5. When my external video is on and viewing on my NTSC monitor, I have a very irritating problem. Whenever I use the keyboard to play in reverse or scrub by holding down the J and K keys at the same time for slow play, the image stutters and drops frames. Also, the Viewer or Canvas display will also periodically black out for a second or two. When I scrub with the mouse, I don't see this problem. It's only when using the keyboard.
When I turn off external video, everything is fine. I've never had this problem in the past with my system. The only thing that's changed is Tiger and Quicktime 7 Pro. I have done all the upgrades and threw away all FCP preference files.
I'm stumped. Anyone else having the same problem?
By the way, video plays fine when in external video mode. Laid off a project last night, no issues or dropped frames.

Oh my goodness I'm having the same problem! Recently I upgraded to Quicktime 7.0.3 but did some Security Updates as well and thought I was up the creek. I'm on FCP 4.5, OS X 10.3.9 and noticed the same backwards stuttering. Thank you so much for putting your solution on there, I will try it first thing when I get to work tomorrow!
Jessica

External Video Monitor with iMac possible.

Dear friends,
recently i have bought one imac 21.5" mid 2010 model. i am a film maker. i make TVC s, corporate docu, docu and short films. previously i worked hiring differnt post production studios but with growing volume of work i there was need for a personal edit setup. i have FC Studio 7 installed in my imav. i wanted to connect one external video monitor to facilitate the edit work flow. 1st i bought and connected a mini dp to vga adaptor and connected my 6 series samsung lcd tv with it. but the result was not satisfactory. now the lcd tv have become the second monitor and the system was working as dual monitor system. i wanted 1 video monitor as we get in pro studios. then i bought 1 mini dp to HDMI adapotor and connected it with the lcd tv throgh HDMI cable. fantastic. system took it automatically. Now i opened FCP, set a/v display to full screen, audio out to HDMI then view>external video>full frame. and u are through. now yuo can see the time line output in the LCD tv with sync audio. cheers. any better way to calibrate the second monitor?

Thanks a lot for your help.
If i consider an old model, maybe one with a DisplayPort input (late 2009 or mid 2010 iMac), is there a chance to connect the card with the DP input with a simple cable, or to verify the compatibility? The card has a DP output but many articles say that screen flickering or blue screen is the result...
Regards,
Andrea

External video doesn't play but only shows still frame (some times).

When trying to view a clip or sequence on my external video monitor (NTSC via firewire through Sony converter box) and only for some of my projects, I cannot get the video to play. It displays a single frame and then updates when I stop playing a clip on the desktop. I've selected "all frames" in the External video option, but I cannot get it to play real time. This only happens with certain clips or sequences. Any ideas what's up?

I've been having this same issue. I'm pretty sure it has to do with one of my sequence settings. I have no issues when I'm playing back an SD project but when I try to playback an HD project to an SD monitor I encounter thsi problem where it stays locked on the last frame I paused at. I'm using a Blackmagic Decklink Extreme HD and attempting to playback over composite.
Thanks

External video headache

Similar Messages

Maybe you are looking for