External Video option not working

Recently our Final Cut System crashed. We're running 10.5.7, FCP 6.0.6. We have an external JVC monitor that always worked before with Video Playback. Now we have no Video Playback options (we do not use Digital Cinema Desktop - but that is all that is currently available.). We have reinstalled FCP several times - the issue is NOT a) installation b) a JVC driver c) a faulty monitor (we see an image when we digitize footage). Footage is digitized through a Sony HDV 1080i deck. The deck is functionally normally. In fact, everything is functioning normally except that since we did the system reinstall we no longer have any video playback options behind Digital Cinema Desktop. The Help boys tried but I couldn't describe the problem any more clearly than this. The connections have been checked and indeed not changed. The Video Playback worked for six months previous to the crash. Does anyone know how we can recover External Video options? PS Important note - the External Video setting is set to OFF and will NOT reconnect to "All Frames" or "Single Frame". Thanks.

Are you trying to preview HDV? Or DV? I know you can preview HDV via firewire as DV...don't know how to do that...but someone does.
Shane

Similar Messages

My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested. How can there be audio issue for all these devices at the same time?
As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
Peace,
P. Dreadie

Print to video HDV not working

I'm having problems with printing my HDV project to the camera.
On a DV project it works, but when I open my HDV project I cannot choose any external video options,
I can log and capture, but not the other way.
I read that the edit to tape function does not work in HDV, but printing to video should.
Just don't know how
Maybe someone can help me
Thank you!

If it's a sony camera involved, select the "Easy Setup" that matches the sequence setting... like 1080i for example, and see if this doesn't clear things up. Make sure the camera is in VTR mode as well. If it's not a Sony camera check the settings it uses here: http://www.apple.com/finalcutstudio/resources/devicelist.php
Jerry

External mouse scrolling not working

The scrolling function of my external mouse does not work when the MacBook Pro is not plugged in with its powercord. The mouse buttons seem to be functioning. So does as an external keyboard. My wife has the same problem (using 10.6.2 OS). There are no options in the System Preferences that deal with this. Is this just an oversight by Apple? This basically makes using an external keyboard and mouse a nonviable option for a laptop unless you are near an electric outlet. If you know of a workaround I would appreciate the information. If not, it is something Apple will have to correct as it a pretty obvious oversight.
Thanks in advance for any advice.
Tony

Check your settings when it is unplugged to make sure they are still properly configured. You might even want to try and disable the trackpad when a mouse is being used. I would also check out USB Overdrive (Shareware).

I recently moved my music to an external hd. I deleted the music from the internal. When i plug in the External,itunes doesnt pick it up. I have pointed itunes towards external but still not working,driving me nuts!

I recently moved my music to an external hd. I deleted the music from the internal. When i plug in the External,itunes doesnt pick it up. I have pointed itunes towards external but still not working,driving me nuts!

LeoGets wrote:
I recently moved my music to an external hd.
the best way would be to copy the entire iTunes folder (not just the iTunes music or media folder) from <MacintoshHD>/users/<yourname>/music on your Mac to the external, then launch iTunes while holding the option (⌥) key, click on choose library when prompted, and select the iTunes folder on the external.
I have pointed itunes towards external but still not working,driving me nuts!
that tells iTunes where to put new additions to your library, not where the content currently is.

External editing does not work in LR4 (??)

external editing does not work in LR4 (updated from LR3 a few days ago)
has anyone an idea to solve this problem?
Thank you.
Regards
Priska

priskaleutenegger wrote:
no ..
when I send the RAW Document for external editing (Elements 10) nothing happens at all ... zero :-(
a friend of mine has the same problem - also updated from LR3 to LR4, external editor: elements 10
Which process version is the image you're trying to edit externally?
You right-click (I'm assuming PC, can't help Macs), there should be a context menu option "Edit in". You choose that, and there's an option for Elements 10 or not?
If so, what happens when you select it? Do you get any further message?
If not, you may have to go to Edit menu, preferences, External Editing tab and create a preset for Elements. In the "Additional External Editor" area, click "Choose" and navigate to wherever Elements is on your machine and you can create a new external editor.

"Itunes has detected a problem with your audio configuration. Audio/Video may not work properly".

Turned my Dell running windows 7 off 2 days ago. Turned on today. Launched ITunes and got message "Itunes has detected a problem with your audio configuration. Audio/Video may not work properly".
All my albums are there but won't play.
Deleted Itunes and reinstalled. Same as before.
Any ideas ??

Hey MrCurwen,
I was able to find an article that included the same error message you're experiencing:
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371
According to that article, if you see the error message "iTunes cannot run because it has detected a problem with your audio configuration," QuickTime may need to be reinstalled. Please follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
On the Start menu, click Control Panel.
Follow the steps appropriate for your Windows operating system below.
Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
During the download:
If you choose to run the installer, proceed to the next step.
If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
Follow the on-screen instructions to install QuickTime.
Reopen iTunes.
Cheers,
David

Amd video drivers not working after win 10 upgrade

AMD video drivers not working after win 10 install. running on microsoft basic driver, call hp smartfriend assistance. appearently there is a fix but hp will not help unless i pay 100.00$ US because the warranty has expired on my notebook.Have a pavilion dv7 was running AMD Mobility Radeon HD5000 series. Thank you hp will not be purchasing an hp product again. Alienware here i come.

Not much we can do since your model is not supported by Toshiba for Win 10 upgrade according to THIS list so there is no Win 10 driver for your TouchPad. That button, however, is not the only way to disable/enable the TouchPad. FN+F9 does it and you can fix it where, when you plug in an external mouse, it will automatically be disabled.

Hi Guys, I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out

Hi Guys,
I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out as this web-site has been payed for by my client.
Alex

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Video does not work in iOS 8.3

I have the iPhone 6 128GB. I did update to iOS 8.3.
I have some problems after the update... video does not work, it wont play, i can click on the play button but nothing happens.
The problem ocurs in safari when i visit news sites and try to play video in articles.
When i get snapchat with video... it wont play, it is only black screen with the seconds counting down... and some times it just craches the snap app...
I cant watch videos in instagram or facebook...
I live in Norway and I think it is stupid that Apple still has not fixed the keyboard... the "123" key and the "globe" key swithc place with each other in portrait and landscape mode... why...!?! ( this is when i use Norwegian keyboard )
Yes i have rebooted the phone holding in both buttons until apple logo is visible 2 times
Yes i have rebooted the phone even more
Yes i have quitted the apps that was open and the only way i get the black screen away in snapchat is by killing the App...
Apple... i am not impressed.

Here is the strangest thing, what works for you does not necessarily help other. I rebooted my phone several times, and yes, youtube finally worked, but only for some hours then it did not work. I did quit all Apps and rebooted with home and power button pressed inn until apple logo appeared and disappeared again, i had to press power to start the phone. I repeated this step. Now the videos where playing in all apps. The next morning i did get a snap on my iPhone, i tried to see it, but it was only black screen with text and a clock counted down to 0, but it stopped on 1... and the app froze.
I dubble clicked the home button, and there where 25 active apps, apps that i had not used for days and note... i manually quitted all apps the day before... how did this apps appear again ? The Apps that where terminated do appear again after reboot... i don't know why, i have still trouble to see video. I hope for a fix from Apple, because i have so much i don't want to loose in my phone.

Video does not Work in iTunes Store please help! annoying problem!

The video does not work in the itunes store. I get no picture, only sound when i want to preview a music video or a movie trailer. No video at all. However, i can watch my movies and music videos that i already own. Please, is there any smart guy who knows a solution?

I'm having this same issue. I tried some things but still couldn't get it to work the way it used too.
It will not play the video portion in iTunes only the audio if I click on the song. If I switch the settings from Music Video to TV show in the info tab, the file plays fine. If I open it in Quicktime, the file plays fine.
I've tried changing the preferences so that the video will play in the iTunes window, in a separate window, etc. and all it plays is the audio and will show the artwork instead of playing the video.

Where left off video setting not working in ios 7

Since upgrading to ios 7 the 'Where left off' stting on the Video is not working. I have turned it off/on and it is ticked. Every time I switch off the iPad 2 and then turn it on again the last video played place is not remembered - it always resets at the beginning. This happens on my iPhone 4s as well as that is at ios 7 now as well. Both devices were OK with remembering the video place before upgrading.
The videos are produced from Handbrake and not store purchases but I dont have any store purchases to try it out.
Anyone else seeing this (or not)
Paul

I have this problem too since IOS7, except I don't have to switch my ipad off, I simply have to have not watched a video for a bit and when I switch back to the vid app it forgets all over again. VLC looks to be the much better app

In google video chat, video is not working in safari

video is not working in google video chat. it shows a black screen. what could be the problem. i have tried in safari, firefox, chrome. face time is working properly. (camera is working)

thanks
i got the solution.
Enable the "Video chat enhancements" lab in Gmail or select 'enable high resolution video' in your Chat settings in iGoogle or Google+. The Video Chat Enhancements is under "Labs" in your Gmail Settings. It works fine.

HT6065 I have a problem with my Mac book pro, my external monitor is not working and i need it to do my business. Please can someone help me with this. I am running windows 8 on parallels.

Since I have up dated my Macbook pro, my external monitor does not work. Who can help me

It was working untill i did the update

Video Posting Not Working for One Page - Working fine on others...

I have a page created using iWeb that features a video, however the video will not load properly when the page is opened.
here is a link to the page where the video DOES NOT work:
http://web.mac.com/minorstrachan/iWeb/Surviving/Surviving%20WEB.html\
I published the page using homepage and the video works, here is a link to the page where the video DOES WORK:
http://homepage.mac.com/minorstrachan/iMovieTheater6.html
As anyone can clearly see, the quality of the homepage created site is not nearly as good as the iWeb created site and therefore I would much prefer the iWeb site to work.
So far I have tried renaming the video, creating a new page in iWeb, creating a new site in iWeb, and re-encoding the video and using the new encode.
So far none of these solutions has worked. Does anyone have any advice/experience with this or similar problems?
And just for the record, I'm using the latest version of iWeb, 1.1.2.
Thank You,
My personal email address is [email protected]

At the very least, you should take the last slash off the end of that URL above....otherwise it won't work... like this...
http://web.mac.com/minorstrachan/iWeb/Surviving/Surviving%20WEB.html
To better shield you from making errors like this, you should focus on using the shortest URL possible to get to your page. For your situation with multiple sites, you can use this general URL format...
http://web.mac.com/username/iWeb/sitename , which would yield...
http://web.mac.com/minorstrachan/iWeb/Surviving
That should fix your problem.

External Video option not working

Similar Messages

Maybe you are looking for