External WD Hard Drive Not Showing In File Explorer

My External WD ( 500GB My Passport) Hard drive Is Not showing In File Explorer...I Have Tried Re-installing It But Nothing Worked....Any Idea About Solving This Problem Without Losing Any Data ?

My External WD ( 500GB My Passport) Hard drive Is Not showing In File Explorer...I Have Tried Re-installing It But Nothing Worked....Any Idea About Solving This Problem Without Losing Any Data ?
a lot of these USB disks are garbage. Remove the hard disk from the case and connect it to an available desktop which will be able to read the disk.
the cheap usb controllers are often the cause of the problem
Corsair Carbide 300R with window
Corsair TX850V2 70A@12V
Asus M5A99FX PRO R2.0 CFX/SLI
AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
G.SKILL RipjawsX DDR3-2133 8 GB
EVGA GTX 6600 Ti FTW Signature 2(Gk104 Kepler)
Asus PA238QR IPS LED HDMI DP 1080p
ST2000DM001 & Windows 8.1 Enterprise x64
Microsoft Wireless Desktop 2000
Wacom Bamboo CHT470M
Place your rig specifics into your signature like I have, makes it 100x easier to understand!
Hardcore Games Legendary is the Only Way to Play!

Similar Messages

  • External USB Hard Drive not showing up on Time Capsule

    Hi all,
    I have a 500 Gb Time Capsule that used to be able to detect my external USB hard drives. I had to store my things for a while and have just started using the Time Capsule again. The TC works fine, however, the same USB external hard drives I used to connect to the TC are not showing up anymore :s They show up on the desktop when I connect them directly to my MacBook via USB. I have been through most of the file sharing options in Airport Utility and System Preferences but have not been able to solve this. I can't think of any settings that would have changed from when they were showing up in the past. Any help would be greatly appreciated. Thx

    yosemite won't work with ntfs drives for some reason, i've had the same issue with my toshiba. i thought ok lemme buy another one, and transfer it over maybe it's a driver issue which i've tried over and over, apple support can't figure it out.
    here's a simple fix, but the problem is i have an external where all my photography and video files are stored, so i can't access them right now and it's making my life ****.
    http://guides.macrumors.com/Formatting_an_External_Device
    that does work and make the drive mountable now, but problem being i can't obviously reformat the old drive and lose everything. once the new drive is formatted for mac i can't plug it into a pc to transfer the files from. which is the only problem now. but formatting the drive for mac only DOES work. but you're just screwed and not able to use it ntfs. hope the link helps SOME people.

  • Why is my External Hard Drive not showing in Aperture 3.6 Import?

    Why is my External Hard Drive not showing in Aperture 3.6 Import?
    Only my computer hard drive is and I want to import from an external drive.  I have always been able to until I updated to Aperture 3.6 and Yosemite.

    Only my computer hard drive is and I want to import from an external drive.  I have always been able to until I updated to Aperture 3.6 and Yosemite.
    I had the same problem. On the folders on the drive with the Aperture library did show in the Import panel. After I clicked the computer icon in the upper left corner of the Import panel, suddenly all drives appeared.
    You can also try to drag the folder you want to import into the Import panel, to point the file chooser to the drive.

  • My external hard drive not showing up

    Hello,
    My external hard drive is not showing up on my desktop. I went to finder & preferences>general and made sure I checked "show these items" and checked hard drives. I even unchecked it because I have 2 other external hard drives. When I checked the hard drive box the other 2 hard drives appeared but the third hard drive did not. The hard drive not showing up on my desk top does show up when I double click my system hard drive & can be opened from there, but I want to see it on my desk top. Any help would be appreciated.
    Thanks

    This procedure is a diagnostic test. It makes no changes to your data.
    Please triple-click anywhere in the line below on this page to select it:
    ls -@Oaen /V* | pbcopy
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    Wait for a new line ending in a dollar sign ($) to appear below what you entered.
    The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
    The Terminal window doesn't show the output. Please don't copy anything from there.
    If any personal information appears in the output, anonymize before posting, but don’t remove the context.

  • External Hard Drive/Not Showing Up on Desktop

    I have a G4, running OS X 10.2.8 and recently my kids deleted some important data. So--we bought an external hard drive (WD MyBook 160 GB Essential Edition, which says on the box that it runs 10.2.8 and higher).
    We took the external hard drive and the computer to a reputable repair place, the guy there took the hard drive out and using a G6 system, restored what he could to the external hard drive.
    We bring it home, plug it in, and the computer is not reading the new external hard drive. I did check in disk utility, and it shows up as a greyed out item on the disk utility.
    The external hard drive does show up when hooked up to my husband's office PC.
    Any ideas as to why this is happening and how to correct it?
    Thanks, Ruth

    OK, I figured it out (in case anyone else needs to know) with this information from the Western Digital site:
    Macintosh Operating System 10.3.x or earlier will only recognize FAT32 partitions that are smaller than 128-gigabytes. Multiple FAT32 partitions smaller than 128-gigabytes will need to be created in order for Macintosh Operating System 10.3.x or earlier to recognize the partitions. You will need to use a Windows based computer to create FAT32 partitions, as Macintosh does not have the ability to create them.
    Macintosh Operating System 10.4.x or later can recognize FAT32 partitions over 128-gigabytes.

  • External Hard Drive not showing in my computer

    I have an external hard drive that im trying to connect to my computer with usb2.0 and it doesn't show up in my computer.  I can see it in Disk Management and it says its Online but doesn't assign a letter to it.  I'm running Windows 7 Pro 64bit.
     I have 2 internal drives.  I have tried assigning the backup drive to different letters and that doesn't seem to work.  Any ideas???

    Hi,
    I understand that the external USB hard drive doesn’t show in Windows Explorer but detected in Disk Management. 
    To resolve this kind of issue, I would like to propose the following suggestions:
    1.    
    Go to Device Manager, uninstall the USB hard drive,
     scan for the hardware change and let Windows automatically re-install driver for your device.
    2.    
    Open Registry Editor, navigate to the following item:
    HKEY_LOCAL_MACHINE\SYSTEM\MountedDevices
    Find if your device is registered and assigned a letter.
    As a work around, I suggest you accessing the external hard drive via a Command Prompt, copy out the data, then format the hard drive.
    1)   
    Click Start, type: cmd in the Search bar.
    2)   
    Right Click cmd and click Run as Administrator.
    3)   
    Type the following command:
    Copy [source] [destination]
    Best Regards
    Dale
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • External Hard Drive not showing on desktop

    Hi,
    I'm using a macbook pro, 15", and have been using it with my external hard drive for the past 2 months.
    This afternoon, I was using the external, where i have all my music and photos stored, and it was working fine. I left the computer on sleep for about 2 hours (all programs that have stuff on the external I made sure to quit before), and when I got back the "icon" for the back up disk was slightly more "invisible" on my desktop and time machine informed me that the latest back up failed. When I tried to eject it (nothing on the disk was being used) it said it couldnt be ejected because the disk was in use.
    I tried to eject again, same thing, so I restarted the computer. When I restarted the computer the external harddrive icon did not show up on my desk top. I tried pulling it out and plugging it in a few times, the disk will start up, but not load onto my desk top.
    HELP!!!
    the external hard drive is a Western Digital "my Passport"
    Thank you!

    Danja.schluter wrote:
    if I repair the disk, will i lose everything on it?
    Running Disk Repair will not harm your data,  the idea is to repair  and make it functional again. 
    If successful I would make a back up of that data because you may be skating on thin ice.

  • External Hard Drives not showing

    I have 2 external hard drives connected using FW 800, a Western Digital 500TB & a Seagate 500TB. The Western Digital has a habit of freezing and the last time this happened I powered down the iMac. When I re started the iMac neither external hard drive is showing on the desk top what's happening and how do I cure this?

    HI MIke,
    To start with if your forum profile is correct you need to update your system softare to 10.5.8. Go here and install the v10.5.8 Combo Update
    Also, in the Finder from the Menu Bar click Finder/Preferences and select the General tab.
    Select the 2nd button and relaunch the Finder.
    Carolyn

  • External USB hard drive not being recognized

    Hello! I'm sure this has been posted before, but excuse my naivety with this sort of thing...
    I have a mac mini 10.5.6 (1.83 GHz Intel Core 2 Duo) and I run the Time Machine function to an external usb hard drive. The hard drive worked fine (plugged into the usb port on an older keyboard), but I went out and bought a new aluminum apple keyboard (because they look so cool ^_^ ) - I plugged the external usb drive into the keyboard and it wasn't recognized, so I tried plugging the external drive directly into the mac mini, but it is still not recognized. It is not showing up in Disk Utility or in System Profiler
    Help? I'd hate to have to give up this fancy keyboard...
    Thank you!
    Dr. E

    I believe I had my external drive plugged into the (old) keyboard because with the old mac that I had didn't have a free usb port for it - so when I got the mini I just plugged things back in where they were. But I have always had the Time Machine back up to this drive (connected to the keyboard) though it has been slow (another reason I thought the new keyboard was a good idea).
    I tried restarting the computer without the alu keyboard plugged in, but same problem of no drive showing up.
    Here is what System Profiler has to say about my drive:
    USB2.0 Storage Device:
    Capacity: 93.16 GB
    Removable Media: Yes
    Detachable Drive: Yes
    BSD Name: disk1
    Product ID: 0x6830
    Vendor ID: 0x04b4 (Cypress Semiconductor)
    Version: 0.01
    Serial Number: DEF107920F07
    Speed: Up to 12 Mb/sec
    Manufacturer: Cypress Semiconductor
    Location ID: 0x3d130000
    Current Available (mA): 100
    Current Required (mA): 0
    Mac OS 9 Drivers: No
    Partition Map Type: GPT (GUID Partition Table)
    S.M.A.R.T. status: Not Supported
    Volumes:
    USB:
    Capacity: 92.84 GB
    Available: 53.14 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk1s2
    Mount Point: /Volumes/USB
    I don't know the brand or model as it has 'always' been in the case that in which it currently resides and I didn't physically buy the thing :\ I do know that no software was installed with the drive as I assumed that when I put all the old info from the original mac to the mini that it was the sort of thing that would carry over.
    Sorry I'm not terribly helpful - Thank you!
    Dr. E

  • USB Hard Drive not showing up in AirPort Utility

    I have been using this AirPort Extreme for over two years now and it's been working fine. I finally decided to buy a self-powered USB hard drive so I can share it over the network. However, after I unpacked the hard drive, connected it to my Mac and reformatted it to HFS+ Journaled and GUID. I plugged the hard drive into my AirPort Extreme's USB port and waited. I looked in my AirPort Utility and saw nothing in the disk list.
    I spent hours searching online and discovered that I am not alone in this problem, although solutions are rare. I did try one solution where I hooked up the USB hard drive to a powered USB hub and the hub into AirPort Extreme. It actually worked once and after I rebooted everything, even though the hard drive still showed up in the disk list, no computers can connect to it. Although if I connect the hard drive directly to a Mac, it would still work perfectly.
    Having a USB hub is not a long term solution not that it's working anymore anyway. I would appreciate any suggestions you may have, thanks!

    Weilishu wrote:
    Thanks for the response. However, I'm not sure what you mean.
    So far my experience is far from "Just connect the external hard drive to the USB port on the back of your AirPort Extreme and — voilà".
    did you read the support article Daddy linked ? it clearly says
    JGG

  • 2.5" external USB hard drive not recognized by my iMac

    I have a small 2.5" external USB hard drive that my intel iMac will not mount or see. My 12" G4 Powerbook sees it fine and it is formatted in Mac OS Extended. My iMac is bootcamped and XP on my iMac sees the drive but not OS X Tiger on the iMac, (wierd) I have Tiger on both my Macs too.
    Why does the intel based OS X refuse to see this external 2.5 HD. It sees a 3.5" USB one I have but not the small one. I know it is software.

    Hey coby,
    Well thanks for the star. Not sure I deserve it.
    i then tried connecting the drive to each USB port again, and voila! i have found one it works in. I guess my computer's ports must be a little worn.
    Hmm well try looking inside and see if there's some smutz in there, if the contacts are dirty or bent or worn.
    i was starting to think i would have to go out and get a USB hub to give it some more power.
    Is it powered off the USB? If so that actually might be a good idea since that puts a lot of strain on the connectors. Even if it's self powered it might be a good idea since it would take the strain off an obviously flakey USB.
    richard

  • Windows Server 2012r2 Essentials - Dashboard - Server Folder and Hard Drives Not Showing..

    Hi,
    Following the last series of Windows updates, I'm experiencing problems with our WS2012R2 Essentials server. When opening the Dashboard, the 'home:getting started' tab shows all correct except 'server folders n/a'. On checking the Storage tab, the normal
    display for 'server folders' and 'hard drives' just shows 'refreshing list of items'.
    Despite symptoms above, Storage Space and Server Folders show correctly in server Windows Explorer and are available to client computers across the LAN. It just appears that for some reason the Dashboard cannot see them.
    One other related symptom I've noted is that for some reason the 'wsestoragesvc' Windows Server Essentials Storage Service no longer starts automatically. Even when started manually Dashboard symptoms remain - server folders and hard drives aren't visible
    on dashboard.
    I've run sfc /scannow to check for problems - all clear and run chkdsk on the system volume.
    Would welcome ideas on what steps to be taken to fix problem. Many thanks..

    Hi,
    The issue could be due to a custom service knocks on effect on the Windows Server Essentials Storage Service and causes the service no longer starts automatically.
    You could refer to the thread below to troubleshoot the issue:
    WHS 2011 Dashboard shows no users or drives
    https://social.microsoft.com/Forums/en-US/99fe8229-091e-4130-a279-19e0b8d8a0a8/whs-2011-dashboard-shows-no-users-or-drives?forum=whs2011
    If the issue still exists, try to reinstall the Windows Server Essentials.
    Dashboard storage tab does not show folders or hard drives
    https://social.technet.microsoft.com/Forums/en-US/d0c280cc-b0db-48d4-b649-d0db476fb4b5/dashboard-storage-tab-does-not-show-folders-or-hard-drives?foru
    Best Regards,
    Mandy 
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • External Hard Drive Not Showing Files

    Hi. I'm really in a panic right now because school starts tomorrow and a problem occurred with my external hard drive today. Before I start, I would like to clarify that I use a Macbook Pro 15" (not Retina Display). Here is what happened:
    Around 6 months ago, I was organizing the contents of my external hard drive into folders (i.e. "Movies" > "Romance," "Action," "Horror," etc.). In the midst of doing so, my laptop kind of froze and before I knew what was happening, the contents of the "Movies" folder was invisible. The "Movies" folder itself was still visible and accessible, but its contents were not. When I double-clicked the "Movies" folder, nothing would be shown. It was as if it was empty. The problem is that something was still taking up space on my external hard disk. When my friends asked to copy some of my movies onto their computers, I agreed and saw that they could access the "Movies" folder on their Mac laptops! This means that it was probably a problem with my Mac laptop. I decided to ignore it because I was still able to access the contents of the folder if I plugged in my external hard drive into my TV (it's an LG TV).
    Today, I decided that I've had enough with the invisible folder. I needed to access movies from the folder and because I couldn't access it, I got very stressed and decided to repair it myself. It was probably one of the worst decisions I've ever made.
    I opened Disk Utilities and clicked "Repair Disk" and then "Verify Disk." I then clicked "Repair Disk" again just to be safe (which was absolutely stupid in hindsight). Hoping it would have solved the problem, I ejected my external hard drive and plugged it back in. Once I plugged it in and opened it, I was faced with this:
    There was absolutely nothing else visible in my external hard drive. The reason I'm still fighting to fix this and not throwing out the hard disk is that when I got the info of my hard drive, a lot of space was still taking up my hard drive. Here is what I did (the name of my external hard drive is "Mines of Moria"):
    Mines of Moria > right-click > Get Info
    Once the info was shown ("Mines of Moria Info"), I saw this:
    Do you see how annoying this is?! It clearly states that there is only 17.78 GB left on the external hard drive meaning that there are a LOT of files on this hard drive considering its capacity is 1 TB, but I can't access or see anything inside the external hard drive! I tried to open my hard drive on my brother's Alienware (Windows 7), but it couldn't open it because its format. I also tried plugging it into my LG TV and the only folder visible is the "found.000" folder and I can't access it.
    Please give me some advice as to what I can do as soon as possible. I am willing to go to a store to fix it, but I would much rather try to do it myself at home. I transferred all my movies from my laptop to this external hard drive because I had no more space on my laptop (yes, almost 90% of the space taken up on my external hard drive is used up by movies and episodes).
    Please help me. I also have school files on here (granted, they are from two years ago, but you never know when you're going to use them). I'm a HUGE movie junkie and I've downloaded so many movies that I don't even remember what I downloaded last week (I just can't keep track of which ones I've downloaded when).
    This is really important to me, so I would be VERY grateful for any and all relevant and helpful tips and advice.

    The problem is caused by the third-party software you installed in order to make NTFS volumes writable. Refer to the developer for support. You might be able to repair the volume in Windows using the CHKDSK program.

  • External Hard Drive NOT Showing Up on Desktop or in Finder Window

    I have a PowerBook G4 and am connecting a Western Digital portable hard drive via USB (high-speed). It worked it the past, but it is no longer showing up in finder windows or on the desktop, and as such, I cannot access the files stored on it. When I open up the system profiler, it shows up as being connected in the USB Device Tree, but I don't know how to proceed... PLEASE help, I am a photographer and I have tons of images stored here, not to mention my iTunes library!!!

    Have you tried 'mounting' the drive from within Disk Utility (found in 'Utilities' within the Applications folder)?
    Do you have any other USB devices connected when you connect the drive? If so try ejecting all other USB devices before connecting the drive. Have you also tried using a different USB cable?
    Does the drive require an external power supply? If so, have you checked the power supply?
    Have you noticed if there were any unusual noises or activity from the drive in recent days? If so try 'Repair Disk' from Disk Utility. I don't want to scare you but there is always a possibility that the drive is either failing or has failed - hopefully that will not be the case.
    Do you have DiskWarrior? If so try checking the drive with DW.
    15" 1.25GHz/12" 1GHz PBs, 2xPPC Mac minis, 12" iBook G4,   Mac OS X (10.4.7)   Cube, 2xTAMs, iPod 4G & nano 2G, iPs, AEBS, AX

  • External hard drive not showing up on AFP server

    hi
    i have successfully connected a couple of times to a firewire external hard drive connected to my dad's iMac over the internet (AFP server) for the purpose of backing up some files, but now it doesn't show up at all as a volume when i connect to his iMac through finder/go/connect to server. i don't believe that any settings were changed, so don't understand why it isn't showing up. currently when i get info on the drive 'shared folder' is checked, everyone has permission to read and write and 'ignore ownership on this volume' is checked, and file sharing is enabled in system preferences/sharing.
    does anyone have any ideas of what i can do to get the drive to show up again?
    thanks
    nick

    OK, I figured it out (in case anyone else needs to know) with this information from the Western Digital site:
    Macintosh Operating System 10.3.x or earlier will only recognize FAT32 partitions that are smaller than 128-gigabytes. Multiple FAT32 partitions smaller than 128-gigabytes will need to be created in order for Macintosh Operating System 10.3.x or earlier to recognize the partitions. You will need to use a Windows based computer to create FAT32 partitions, as Macintosh does not have the ability to create them.
    Macintosh Operating System 10.4.x or later can recognize FAT32 partitions over 128-gigabytes.

Maybe you are looking for