External Web Services: parameter SY-CLIENT cannot be fixed

Hi,
I am configuring Web Service for Supplier Directory. At the standard call structure, I added parameter SY-CLIENT and fixed the value as 300. However, the setting fails to override the default value of client. How can I change the client?
Best regards,
ts

Hi TS,
Add parameter SAP-CLIENT with your client number and try.
Best Regards,
Anil

Similar Messages

External Web Service setting for Supplier Registration ROS to EBP

Dear guys,
We are working on Supplier registration scenario where potential supplier are accepted in ROS client and then transferred to EBP via Suppliers Directory.
For this we have defined External Web Service in both clients ROS and EBP
Can anyone tell me what are the Parameters and setting required to define External Web Service?
We have created New Web Service with following parameters in both the clients ROS and EBP.
Web Service ID : ROS
Description : Suppliers Directory in ROS Client
Bus. Type of Web Service : Lost of Vendors
Display Partners Data Again in Vendor List : X
Vendor Root Node : 50000620
Use Error Log : X
Use HTTP GET to call Web Service : <blank>
Codepage of Service : <blank>
Technical Type of Service : <blank>
Logical system : SRDCLNT300 (EBP Logical system)
Path for Symbol for Service : <blank>
Define Standard Call Structure with following Parameters
1 <blank> http://erpdevsrci.egat.co.th:8010/sap/bc/bsp/sap/ros_prescreen/main.do
 URL
2 HOOK_URL <blank> Return URL
Please correct us.
With this setting system does display the Suppliers Directory option in Supplier Screening (Suppliers Directory in ROS Client), however after selecting suppliers directory instead of listing the accepted supplier to transfer to EBP, system displays the same suppliers Prescreen again with no option to transfer accepted supplier to EBP client.
I think I have not set the External Web services setting properly ..
So can anyone send me the correct web service parameter setting?
Regards,
Sandeep parab

Ramki/disha,
I have defined following setting in external web services in EBP client
Web Service ID : ROS
Description: External Web Service in EBP
Bus Type of a Web service : List of Vendors
Display Partner Data again in Vendor List : X
Vendor Root Node : 50000620 (this is Vensor Root node in EBP client)
Use Error Log : X
Use HTTP GET to call Web Service : <blank>
Codepage of Service: <blank>
Techinical type of Service : <Blank>
Logical system : SRDCLNT310 (this is ROs client from there supplier will be transfered)
Path for symbol for service : <blank>
Standard Call Structure Parameter setting as follows
1. <blank> http://....ros_prescreen/main.do URL
2. sap-client 310 fixed_value
3. sap-username dineshp fixed_value
4. sap-password GAJANAN fixed_value
5. HOOK_URL <blank> Return_URL
6. ~OkCode ADDI fixed_value
7. ~target top fixedvalue
8. ~caller CTLG fixed_value
Also defined ROS external web service as default CAT attribute in the organization setting.
Maintained ROS client in SAP_BBP_STAL_STRAT_PURCHASER role.
Created New Users in ROS as well as EBP and tried the scenario. still it failed to transfer the supplier from Ros to EBP.
Where can we debug the error message?
Regards,
Sandeep

Using Client Side Extensions (SWF) to call external Web Service

Hi,
I'm using .swf files to extend my CRMOD application, and one of my requirements is to be able to show information on a custom applet using the Client Side Extensions. This information is coming from an external system, so i'm trying to call this external web service using .swf.
When i create my swf application and i run it locally, i can access the web service and receive the results into my browser, but when i do the same call from the custom web applet in CRMOD i don't get any results.
Can someone tell me if this is possible? And if so, how to do it?
Best Regards,
NF

Post Author: luke
CA Forum: Data Integration
Yes. I have figured out the way to do it.
Luke.

Error while trying to call external web service from oracle PL/SQL 10.2 g

Hi I am trying to call an external web service from oracle PL/SQL .I am getting following run time error when I try to set the opeartion style.
But as per the oracle documentation this is one of the 2 valid values.
ORA-29532: Java call terminated by uncaught Java exception: operation style: "document" not supported.Teh webservice does expect the operation style as document.
Following is the code I am executing.
FUNCTION email
return varchar2
AS
service_ SYS.utl_dbws.SERVICE;
call_ SYS.utl_dbws.CALL;
service_qname SYS.utl_dbws.QNAME;
port_qname SYS.utl_dbws.QNAME;
operation_qname SYS.utl_dbws.QNAME;
string_type_qname SYS.utl_dbws.QNAME;
retx ANYDATA;
retx_string VARCHAR2(1000);
retx_double number;
retx_len number;
params SYS.utl_dbws.ANYDATA_LIST;
l_input_params SYS.utl_dbws.anydata_list;
l_result ANYDATA;
l_namespace VARCHAR2(1000);
begin
-- open internet explorer and navigate to http://webservices.imacination.com/distance/Distance.jws?wsdl
-- search for 'targetNamespace' in the wsdl
l_namespace := 'http://service.xmlservices.global.freedomgroup.com/';
-- search for 'service name' in the wsdl
service_qname := SYS.utl_dbws.to_qname(l_namespace, 'ClientCoreWebServiceBeanService');
-- this is just the actual wsdl url
service_ := SYS.utl_dbws.create_service(HTTPURITYPE('http://hostname/GlobalWebServices/services/ClientCoreWebService?wsdl'), service_qname);
-- search for 'portType name' in the wsdl
port_qname := SYS.utl_dbws.to_qname(l_namespace, 'ClientCoreWebServiceBeanPort');
-- search for 'operation name' in the wsdl
-- there will be a lot, we will choose 'getCity'
operation_qname := SYS.utl_dbws.to_qname(l_namespace, 'postalCodelookup');
-- bind things together
call_ := SYS.utl_dbws.create_call(service_, port_qname, operation_qname);
-- default is 'FALSE', so we make it 'TRUE'
SYS.utl_dbws.set_property(call_, 'SOAPACTION_USE', 'TRUE');
-- search for 'operation soapAction' under <wsdl:operation name="getCity">
-- it is blank, so we make it ''
SYS.utl_dbws.set_property(call_, 'SOAPACTION_URI', '');
-- search for 'encodingstyle' under <wsdl:operation name="getCity">
SYS.utl_dbws.set_property(call_, 'ENCODINGSTYLE_URI', 'http://schemas.xmlsoap.org/soap/encoding/');
-- search for 'binding style'
SYS.utl_dbws.set_property(call_, 'OPERATION_STYLE', 'DOCUMENT');
-- search for 'xmlns:xs' to know the value of the first parameter
-- under <wsdl:message name="getCityResponse"> you will see the line <wsdl:part name="getCityReturn" type="xsd:string" />
-- thus the return type is 'string", removing 'xsd:'
string_type_qname := SYS.utl_dbws.to_qname('http://www.w3.org/2001/XMLSchema', 'string');
-- in the line <wsdl:operation name="getCity" parameterOrder="zip">
-- the parameterOrder is 'zip', thus we put in 'zip'
-- the 'ParameterMode.IN' is used to specify that we will be passing an "In Parameter" to the web service
-- the 'ParameterMode.IN' is a constant variable in the sys.utl_dbws package
--vj this cud be either params or xml
SYS.utl_dbws.add_parameter(call_, 'param1', string_type_qname, 'ParameterMode.IN');
SYS.utl_dbws.add_parameter(call_, 'param2', string_type_qname, 'ParameterMode.IN');
SYS.utl_dbws.set_return_type(call_, string_type_qname);
-- supply the In Parameter for the web service
params(0) := ANYDATA.convertvarchar('<TFGGlobalBasicXMLDO><systemCd>GLOBAL</systemCd><username>GlobalAdmin</username><password>GlobalAdmin</password><localID>1</localID></TFGGlobalBasicXMLDO>');
params(1) := ANYDATA.convertvarchar('<TFGGlobalPostalCodeLookupIDDO><postalCode>02446</postalCode><countryCode>USA</countryCode><stateCode>MA</stateCode><cityDisplay>BROOKLINE</cityDisplay><countyDisplay>NORFOLK</countyDisplay><include_inactive_flag>True</include_inactive_flag></TFGGlobalPostalCodeLookupIDDO>');
-- invoke the web service
retx := SYS.utl_dbws.invoke(call_, params);
dbms_output.put_line(retx.gettypename);
-- access the returned value and output it to the screen
retx_string := retx.accessvarchar2;
dbms_output.put_line('done' || retx_string);
dbms_output.put_line('PL/SQL DII client return ===> ' || retx_string);
-- release the web service call
SYS.utl_dbws.release_service(service_);
return retx_string;
end email;

thsi is urgent anybody ????

Consuming an External Web Service using HTTPS and WS Security

Hello everyone,
I'm having a problem setting the security information in a SOAP header using a generated ABAP Client Proxy to consume an external web service that requires a User ID and Password in the Header section of the SOAP message. I need to use HTTPS. I'm on a WAS 7.01 SP08 system so from my readings, SAP is supposed to be able to add the username and password into the header section of the message. I can't seem to get SAP to add this information added to the header.
Here are the steps that I have taken to set the security values.
1) Created the client proxy from the WSDL in SE80. Basic Authentication on the Configuration tab was turned on automatically.
Note, Transport Security is set to None. I cannot change it.
2) Created an outbound set user name profile in transaction WSPROFILE with the appropriate username and password.
3) Added the profile to the default port in transaction LPCONFIG as an outbound under the WS Security section of the screen.
When I called the external Web Service, I got back the following error message:
com.ibm.wsspi.wssecurity.SoapSecurityException: WSEC5509E: A security token whose type is [http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#UsernameToken] is required.
So, after reading through this Forum, I saw that I needed to use the SOAMANAGER. I set up a Proxy in the SOAMANAGER and manually created the Logical Port. This was the only way I could figure out how to set the Authentication Settings in the Logical Port to "User ID / Password". I then entered the User ID and Password.
However, I am still getting the same error message. I feel I am close but missing some small configuration to tell SAP to use WS Security with a Username token.
I'm not sure what I'm doing wrong, so any help would be appreciated.
Thanks,
Stephen

I had this error again so I thought I would post my solution:
The issue is SAP needs to know the certificates being used by the web site being called. These certificates are automatically installed in your browser but need to be manually installed in SAP. This is what I did:
How to find/install new certificates
Make sure you run Internet Explorer as an Administrator so you can export the certificates
Go to the web site that SAP is trying to call in Internet Explorer
Double click on the lock in the address bar
View certificates
Find the certificates that are being used
Tools --> Internet Options --> Content --> Certificates
Click on the “Trusted Root Certification Authorities” tab
Find the certificate identified in step iii
Export as a CER certificate
Click on the “Intermediate Certification Authorities” tab
Find the certificate identified in step iii
Export as a CER certificate
Go to STRUST in SAP
Import the Certificates in the “Anonymous” or “Standard” SSL client
Save
RESTART the ICM via t-code SMICM <-- Critical!!!
Test

External Web Service call from Sandbox Solution in SharePoint 2010

Can anyone from this forum can tell me how to call an external web service from Sandbox solution?
It would of great help as got stuck on it for a long time.
Note:- Cannot use Silverlight and JQuery to call web service from client side.Cannot use full trust proxy.

Hi Dibyendu,
Sorry for delay but fact that we can not call webservice in sand box solution(It's does not support).
The reason behind of this sand box solution support only full trust code.
One or more assemblies referenced by the XmlSerializer cannot be called
from partially trusted code.
When you create a reference to a Web service, Microsoft Visual Studio®.NET creates and places one or more objects in your assembly to store the argument data passed to the method(s) in the Web service. These objects are serialized using the XmlSerializer class
when you invoke one or more of the methods in the Web service. By default, if your assembly is strongly named and resides in the BIN directory, callers with partial trust cannot access objects within that assembly. When you make the call to the Web service
method, the XmlSerializerdetects that there are partially trusted callers on the callstack (i.e. your assembly) and prevents the serialization from taking place even though the object resides in the same assembly.
Er.vinay

Issue when calling an external web service - CRM 2013

Hello everyone.
This is my scenario:
I'm doing a real time data integration from CRM to another software. I deployed several plugins, mostly in create/update messages, for the entities i want to sync. The developers of the other software gave me the endpoint of the web service and I created the
client using svcutil. I manually created the binding and gave it to the generated client, along with the endpoint. At the first tests I could sync some registries, but I had some mapping errors. I debugged the plugin, corrected the errors, and when I
want to tests again, the plugin is throwing me an exception when calls any method of the web service. Let me explain the issue:
The exception:
I instantiated the client for the web service (passing to it the binding and the endpoint). And when I'm trying to call any method (ex. Add), it throws the exceptions "InvalidOperationException". I started to debug the code and I notice that
just before to call the web service method, the state of the client stills in "Opening". Of course that is generating the exception.
The complete exception is: "The communication object, System.ServiceModel.ChannelFactory`1[IAxxisWcfServices], cannot be modified while it is in the Opening
state."} System.SystemException {System.InvalidOperationException}
I did a test, outside the CRM environment, on a console app with the same conditions of the web services client (generating with svcutil, manually passing the same binding and endpoint), and the same order of the plugin code, and everything works well; The
state of the client never stills in 'Opening', so I discarded any problem with the web service.
Anyone knows if I'm missing something in the code? or some configuration?
The CRM is 2013 On-premise with last updates.
Thanks in advance.

I tried adding the web reference in a console app and works fine. In the plugins this can't be done, because the plugins are deploy in database.
I tried another basic test using ChannelFactory. Only want to retrieve some entity through the external web services:
IPluginExecutionContext context = localContext.PluginExecutionContext;
IOrganizationService service = localContext.OrganizationService;
ITracingService tracer = localContext.TracingService;
try
BasicHttpBinding binding = new BasicHttpBinding();
binding.Name = "BasicHttpBinding_IAxxisWcfServices";
binding.Security.Mode = BasicHttpSecurityMode.None;
binding.Security.Transport.ProxyCredentialType = HttpProxyCredentialType.None;
binding.Security.Transport.ClientCredentialType = HttpClientCredentialType.None;
EndpointAddress endpoint = new EndpointAddress(@"http://*****.svc");
ChannelFactory<IAxxisWcfServices> factory = new ChannelFactory<IAxxisWcfServices>(binding, endpoint);
IAxxisWcfServices channel = factory.CreateChannel();
var entity = channel.FindByEntities(new CRM.Application.Context.Dtos.Asegurado( { CrmGuid = "7C3E96C6-C3BC-E411-80DF-0A736AE14667" }, null, new CRM.Framework.Session() { User = "***", Password = "***" });
catch (Exception ex)
throw new InvalidPluginExecutionException(ex.Message);
That test threw the following exception on the GenericParameterAttributes of channelType of factory object:
http://s27.postimg.org/4wf3er8up/Error.png

Accessing external web service with non-constant URL

Hello, all
I am looking in the documentation on accessing external web services, but either I am looking in the wrong place, or the documentatoin is lacking info.
My clients have several web services in the local network (regular services, not DB-based), the have the same interface, but different URL's.
Versions of the DB are 11, 12, and 16.
First of all, I do not see in the specs an option for a non-hardcoded URL. The logic says that this has to be possible, but I cannot find it.
Second, I need to see an example of accessing an XML or JSon based service, I cannot find it in the specs either.
Can anyone point me to a document with examples?
Thank you
Arcady

The following will call a web service with whatever URL you pass in as the argument "myurl". I think that is what you are looking for.
CREATE PROCEDURE cli_test2( myurl LONG VARCHAR )
RESULT( httpheaders long varchar, httpvalues long varchars
URL '!myurl'
To deal with the resulting data in XML, use the OPENXML() function.
eg. To turn an XML list of employees that looks like this:
<root>
<row EmployeeID="102" Surname="Whitney" GivenName="Fran" StartDate="1984-08-28"/>
</root>
into a table of results, you would do this (where xmlgetemplist() is the web service call):
CREATE OR REPLACE PROCEDURE xmlgetemplist() RESULT( httpheader long varchar, httpbody long varchar)
URL 'http://localhost/demo/xmlEmployeeList'
TYPE 'HTTP:GET';
create variable res long varchar;
-- call the web service
select httpbody into res from xmlgetemplist() where httpheader = 'Body'
-- extract the XML elements into a SQL result set
select * from openXML( res, '/root/row' ) WITH ( EmployeeID INT '@EmployeeID',
 GivenName CHAR(20) '@GivenName',
 Surname CHAR(20) '@Surname',
 PhoneNumber CHAR(10) '@Phone');
To deal with the resulting data in JSON, use the sp_parse_json() procedure.
eg.
To turn a JSON formatted list of employees that looks like this:
"EmployeeID": 102,
"Surname": "Whitney",
"GivenName": "Fran",
"StartDate": "1984-08-28",
"TerminationDate": null
into a table of results, you would do this (where jsongetemplist() is the web service call):
CREATE OR REPLACE PROCEDURE jsongetemplist() RESULT( httpheader long varchar, httpbody long varchar)
URL 'http://localhost/demo/jsonEmployeeList'
TYPE 'HTTP:GET';
create variable foo long varchar;
--call the webservice
select httpbody into foo from jsongetemplist() where httpheader = 'Body';
--turn the json result into a structured array of data
-- this step is required because of less structured nature of JSON
call sp_parse_json( 'output_array', foo);
--extract the JSON elements from the output array into a SQL result set
SELECT output_array[[row_num]].EmployeeID as EmployeeID,
 output_array[[row_num]].SurName as SurName,
 output_array[[row_num]].GivenName as GivenName,
 output_array[[row_num]].StartDate as StartDate,
 output_array[[row_num]].TerminationDate as EndDate
FROM sa_rowgenerator(1, CARDINALITY(output_array))
Hope this helps,
--Jason

Error calling external web service over HTTPS

Hi everyone
I'm trying to call an external web service over HTTPS, and continually get the following error:
com.sap.engine.services.webservices.espbase.wsdl.exceptions.WSDLException: Peer sent alert: Alert Fatal: handshake failure
I haven't tried doing this before, so not quite sure where to start. I have a client certificate that must be used to access the remote web service, and I think the problem is associating the client cert with the web service call.
Has anyone else tried this before? Any suggestions of where to look?
I've had a brief look at Key Storage in NWA, but it's not something I'm familiar with - so not sure if it's even the right place to be looking.
Some help on this would be great!
Thanks
Stuart

Thanks Aleksandar
Here's the output from the trace. Unfortunately the SAP forums don't allow attachments, so it may be difficult to read. Please let me know if you see anything that may help.
Thanks
Stuart
Time Severity User Thread Location Message
09:18:23:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:23:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@fa1b67
09:18:24:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:24:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@4c8af
09:18:24:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:24:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@b6981b
09:18:25:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:25:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=[email protected]
09:18:25:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:25:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=[email protected]
09:18:26:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:26:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=[email protected]
09:18:26:203 Debug Administrator HTTP Worker [0] ~es.espbase.client.jaxws.cts.CTSProvider [com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider] 'nonProxyHosts' are configured '10.|127.|192.168.*'.
09:18:26:203 Debug Administrator HTTP Worker [0] ~es.espbase.client.jaxws.cts.CTSProvider [com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider] 'nonProxyHosts' default value is '10.|127.|192.168.*'.
09:18:26:203 Debug Administrator HTTP Worker [0] ~es.espbase.client.jaxws.cts.CTSProvider Loadin mapping file from location :[c:/mapping.txt]
09:18:26:203 Debug Administrator HTTP Worker [0] ~es.espbase.client.jaxws.cts.CTSProvider Additional file for CTS configuration can not be found [c:\mapping.txt (The system cannot find the file specified)].
09:18:26:203 Debug Administrator HTTP Worker [0] ~es.espbase.client.jaxws.cts.CTSProvider >>>>>>>>> ERROR: Could not find mapping for service QName=vipSoapInterfaceService, class=class com.verisign._2006._08.vipservice.VipSoapInterfaceService
09:18:26:203 Debug Administrator HTTP Worker [0] ~es.espbase.client.jaxws.cts.CTSProvider com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider: Creating client instance with WSDL URL [https://pilot-vipservices-auth.verisign.com:443/prov/soap/val/soap] (vipSoapInterfaceService) <com.verisign._2006._08.vipservice.VipSoapInterfaceService>
09:18:26:203 Debug Administrator HTTP Worker [0] ~es.espbase.client.jaxws.cts.CTSProvider com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider: Using SAP JAX-WS Implemetation to create service delegate.
09:18:26:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:26:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@5586b0
09:18:26:687 Path Administrator HTTP Worker [0] ~s.espbase.wsdl.exceptions.WSDLException Exception : Peer sent alert: Alert Fatal: handshake failure
java.lang.Exception
at com.sap.exception.BaseExceptionInfo.traceAutomatically(BaseExceptionInfo.java:1230)
at com.sap.exception.BaseExceptionInfo.<init>(BaseExceptionInfo.java:147)
at com.sap.exception.BaseException.<init>(BaseException.java:89)
at com.sap.engine.services.webservices.espbase.wsdl.exceptions.WSDLException.<init>(WSDLException.java:34)
at com.sap.engine.services.webservices.espbase.wsdl.WSDLLoader.loadDOMDocument(WSDLLoader.java:140)
at com.sap.engine.services.webservices.espbase.wsdl.WSDLLoader.load(WSDLLoader.java:91)
at com.sap.engine.services.webservices.espbase.wsdl.WSDLLoader.load(WSDLLoader.java:80)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.loadWSDLDefinitions(SAPServiceDelegate.java:201)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.initWSDL(SAPServiceDelegate.java:159)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.<init>(SAPServiceDelegate.java:113)
at com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider.createDelegate(CTSProvider.java:170)
at com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider.createServiceDelegate(CTSProvider.java:151)
at javax.xml.ws.Service.<init>(Service.java:57)
at com.verisign._2006._08.vipservice.VipSoapInterfaceService.<init>(VipSoapInterfaceService.java:41)
at JEE_jsp_result_6740550_1225116575421_1225116585468._jspService(JEE_jsp_result_6740550_1225116575421_1225116585468.java:64)
at com.sap.engine.services.servlets_jsp.lib.jspruntime.JspBase.service(JspBase.java:102)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:433)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:240)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:32)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:431)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:289)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:376)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:85)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:160)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:309)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
Caused by: org.w3c.www.protocol.http.HttpException: Peer sent alert: Alert Fatal: handshake failure
iaik.security.ssl.SSLException: Peer sent alert: Alert Fatal: handshake failure
at iaik.security.ssl.r.f(Unknown Source)
at iaik.security.ssl.x.b(Unknown Source)
at iaik.security.ssl.x.a(Unknown Source)
at iaik.security.ssl.r.d(Unknown Source)
at iaik.security.ssl.SSLTransport.startHandshake(Unknown Source)
at iaik.security.ssl.SSLTransport.getOutputStream(Unknown Source)
at iaik.security.ssl.SSLSocket.getOutputStream(Unknown Source)
at org.w3c.www.protocol.http.g.markUsed(Unknown Source)
at org.w3c.www.protocol.http.HttpBasicServer.getConnection(Unknown Source)
at org.w3c.www.protocol.http.HttpBasicServer.runRequest(Unknown Source)
at org.w3c.www.protocol.http.HttpManager.runRequest(Unknown Source)
at org.w3c.www.protocol.http.HttpURLConnection.connect(Unknown Source)
at org.w3c.www.protocol.http.HttpURLConnection.a(Unknown Source)
at org.w3c.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at java.net.URL.openStream(URL.java:1007)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:201)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:263)
at com.sap.engine.lib.xml.parser.Parser.parse_DTDValidation(Parser.java:282)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:293)
at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:101)
at com.sap.engine.lib.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:127)
at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:146)
at com.sap.engine.services.webservices.espbase.wsdl.WSDLLoader.loadDOMDocument(WSDLLoader.java:132)
at com.sap.engine.services.webservices.espbase.wsdl.WSDLLoader.load(WSDLLoader.java:91)
at com.sap.engine.services.webservices.espbase.wsdl.WSDLLoader.load(WSDLLoader.java:80)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.loadWSDLDefinitions(SAPServiceDelegate.java:201)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.initWSDL(SAPServiceDelegate.java:159)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.<init>(SAPServiceDelegate.java:113)
at com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider.createDelegate(CTSProvider.java:170)
at com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider.createServiceDelegate(CTSProvider.java:151)
at javax.xml.ws.Service.<init>(Service.java:57)
at com.verisign._2006._08.vipservice.VipSoapInterfaceService.<init>(VipSoapInterfaceService.java:41)
at JEE_jsp_result_6740550_1225116575421_1225116585468._jspService(JEE_jsp_result_6740550_1225116575421_1225116585468.java:64)
at com.sap.engine.services.servlets_jsp.lib.jspruntime.JspBase.service(JspBase.java:102)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:433)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:240)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:32)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:431)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:289)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:376)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:85)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:160)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:309)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
09:18:27:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:27:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@20ba3c
09:18:27:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:27:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=[email protected]
09:18:28:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:28:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@26e3bf
09:18:28:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:28:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=[email protected]
09:18:29:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:29:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@f827f6
09:18:29:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:29:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@a8646a
09:18:30:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:30:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=[email protected]
09:18:30:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:30:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@c449f1
09:18:31:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:31:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=[email protected]
09:18:31:593 Info Administrator HTTP Worker [3] System.out SessionImpl::getContext():[ B E G I N ].timerId=15
09:18:31:593 Info Administrator HTTP Worker [3] System.out SessionImpl::getContext():[ E N D ].timerId=[id:#15, elapsed: 0 ms.]

ERROR Consuming external Web Services from JDE E1

Hello everybody,
I am trying to consume external web services from JD Edwards Enterprise One. For that, I have followed "Consuming External Web Services Tutorial".
I have followed all the steps successfully, but when the final test called from an interactive application to the business function that I had created in C get the following error messages in the log file:
[WARN ] JDE - [RUNTIME] *ERROR CallObject@13d346d: CallObject.executeRequest(): Problem executing function [consumingWS] lib [CALLBSFN] GetProcAddress failed. Please see Enterprise Server log for details. Business function cannot be found user:JDE Env:DV900*
[SEVERE] JDE - [RUNTIME] FormEngine.doEvent(): BSFN failed and need roll back!! | Form Name : P5500055_W5500055A com.jdedwards.runtime.base.SystemException: There was a problem with the sever while running the business function consumingWs.\nThe current transaction has been lost.\nPlease exit the application and restart it.\nButton clicked Line number 1\nP5500055_W5500055A
com.jdedwards.runtime.base.SystemException: There was a problem with the sever while running the business function consumingWs.\nThe current transaction has been lost.\nPlease exit the application and restart it.\nButton clicked Line number 1\nP5500055_W5500055A
at com.jdedwards.runtime.engine.form.FormEngine.doEvent(Unknown Source)
at com.jdedwards.runtime.vtcomponent.form.VTForm.doEvent(Unknown Source)
at com.jdedwards.runtime.engine.ButtonEngine.onClick(Unknown Source)
at com.jdedwards.runtime.vtcomponent.VTButton.onClick(Unknown Source)
at com.jdedwards.runtime.vtcomponent.VTButton.processVirtualEvent(Unknown Source)
at com.jdedwards.runtime.virtual.OWVirtual.processVTEvent(Unknown Source)
at com.jdedwards.runtime.virtual.OWVirtual.processEventLoop(Unknown Source)
at com.jdedwards.runtime.virtual.OWVirtual.run(Unknown Source)
at com.jdedwards.base.util.ThreadPool$WorkerThread.run(Unknown Source)
I have tested:
1) Incorrect OCM for BSFNs.
Mapped to development Enterprise Server, so it was failing to find the BSFN.
2) Increase heap space for Java.
3) Business Function Location (C/S): "Both Client & Server Function"
4) Link the Business function with its parent DLL (CALLBSFN.dll)
I'm not sure I'd done well...
5) Update Package
From Buildlog.txt I can see the following error:
Copying \\ORACLE-JDE\E900\DV900\package\DV900FB\lib32\sCALLBSF.lib to \\ORACLE-JDE\E900\DV900\package\DVU100427\lib32\sCALLBSF.lib
Copying \\ORACLE-JDE\E900\DV900\package\DV900FB\work\jdertdll.c to \\ORACLE-JDE\E900\DV900\package\DVU100427\work\jdertdll.c
Generating Makefile: E:\e900\DV900\obj\CALLBSFN.mak
B5500055 : Not checked into pathcode, excluded from the build
.Makefile generated.
Building business functions.
************CALLBSFN************
jdertdll.c
Creating library \\ORACLE-JDE\E900\DV900\package\DVU100427\lib32\CALLBSFN.lib and object \\ORACLE-JDE\E900\DV900\package\DVU100427\lib32\CALLBSFN.exp
CALLBSFN.exp : error LNK2001: unresolved external symbol _consumingWS@12
\\ORACLE-JDE\E900\DV900\package\DVU100427\bin32\CALLBSFN.dll : warning LNK4088: image being generated due to /FORCE option; image may not run
To not build the business function is not possible the package deployment for the server becomes aware of the presence of this business function...
But I have not managed to solve the problem, do you have any idea?
Thank you and regards.

Hello again,
I have modied OCM record with a correct BSSV (the name and the port number were wrong).
And other thing that I have tested is change the parent DLL with a new DLL created by me (Object Name: CALLWS.dll, Product Code: 0, Product System Code:0) and the error is:
*ERROR CallObject@25b780: CallObject.executeRequest(): Problem executing function [invocarWS] lib [CALLWS] LoadLib failed.Please see Enterprise Server log for details. Library in which business funtion resides cannot be loaded user:JDE Env:DV900*
[SEVERE] JDE - [RUNTIME] FormEngine.doEvent(): BSFN failed and need roll back!! | Form Name : P5500055_W5500055A com.jdedwards.runtime.base.SystemException: There was a problem with the sever while running the business function invocarWS.\nThe current transaction has been lost.\nPlease exit the application and restart it.\nButton clicked Line number 1\nP5500055_W5500055A
com.jdedwards.runtime.base.SystemException: There was a problem with the sever while running the business function invocarWS.\nThe current transaction has been lost.\nPlease exit the application and restart it.\nButton clicked Line number 1\nP5500055_W5500055A
     at com.jdedwards.runtime.engine.form.FormEngine.doEvent(Unknown Source)
     at com.jdedwards.runtime.vtcomponent.form.VTForm.doEvent(Unknown Source)
     at com.jdedwards.runtime.engine.ButtonEngine.onClick(Unknown Source)
     at com.jdedwards.runtime.vtcomponent.VTButton.onClick(Unknown Source)
     at com.jdedwards.runtime.vtcomponent.VTButton.processVirtualEvent(Unknown Source)
     at com.jdedwards.runtime.virtual.OWVirtual.processVTEvent(Unknown Source)
     at com.jdedwards.runtime.virtual.OWVirtual.processEventLoop(Unknown Source)
     at com.jdedwards.runtime.virtual.OWVirtual.run(Unknown Source)
     at com.jdedwards.base.util.ThreadPool$WorkerThread.run(Unknown Source)
It seems like it is not possible to find the CALLWS dll... Althought it was built and compiled without errors and warnings...
I would like to debug the Business Function in C from Microsoft Visual Studio 2005, but I can't, because breakpoints are disable.
I have followed the following manual:
E1: BSFN: Debugging Business Functions Using Visual Studio .NET 2003, 2005 and 2008 (I have founded it in Oracle Support (Metalinki)).
And here they say:
"It is a normal feature of visual studio 2003/2005 to disable break point at the start of a debug session and display a warning saying no symbol is loaded. Break point will only be activated on demand when the code to debug is loaded in to the runtime memory".
I think is necessary add the referency with parent DLL (in my case, CALLWS.dll) but I don't know how can I do it. I have tested to insert in Business Function's source code the following line:
"#pragma comment(lib,"CALLWS.dll")" to force to include it, but when it was built:
************CALLWS************
B5500055.c
Replacing B5500055.obj
jdertdll.c
Creating library E:\e900\DV900\lib32\CALLWS.lib and object E:\e900\DV900\lib32\CALLWS.exp
LINK : fatal error LNK1104: cannot open file 'CALLWS.dll'
Microsoft (R) Manifest Tool version 5.2.3790.2075
Copyright (c) Microsoft Corporation 2005.
All rights reserved.
mt.exe : general error c10100b1: Failed to load file "E:\e900\DV900\bin32\CALLWS.dll". The system cannot find the file specified.
Adjusting DLL load addresses . . .
************Build Finished************
I don't understand nothing, because the path is totally right.
Any help is appreciated!
Thank you and regards.
Edited by: user12085357 on 29-abr-2010 2:55
Edited by: user12085357 on 29-abr-2010 3:02

Consuming an external web service with WAS 6.40

Hi all,
I know this thread isnt 100% XI forum related, my apologies for that. However, I believe somebody here has experience with this subject.
Im trying to consume an external web service through WAS 6.40 with se80. When I try to create my proxy object package Choose Create > Enterprise Service / Web Service > Proxy Object > URL type, I receive an error message (SPRX084) -> During proxy generation, an interface description in WSDL format is fetched from the integration builder or from another source and interpreted. This WSDL document must describe the whole interface correctly.
I dont have sure, but it seams something within WSDL object/element. Nevertheless, these external web services are working well with other third party client applications, why SAP WAS cant take this WSDL?
Anyone has faced an issue like this one?
Thanks in advance,
Ricardo.

Hi,
some tools do not generate WSDLs correcty (not with all the standards
or with obsolete parts) and then in ABAP you cannot generate a proxy from it
you should be able to see the some more details in disgnosis section
sometimes you just have to change one or two things in the WSDL
and it will be ok for WAS but you need to find the exect cause
of the error - it can be done by debugging
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Sending SSL Certificate to external Web service in BizTalk 2010

Hi,
We are facing issues in calling the external web service(SAP I Web service) which is authenticated using the SSL self signed certificates.
When BizTalk sends the request to SAP it fails with HTTP 401 error, and in SAP PI the log says calling application not sending the client certificate. Please help us in sending the request to external web service by signing with the client
certificate.
Below are the details,
1. This is a 2-way SSL communication authenticating based on the client Certificate.
2. BizTalk server public key certificate is shared to SAP PI and using SAP PI certificate public key in biztalk
3. Configuration done at BizTalk as given below
1. Created BizTalk Certificate using makecert command
2. Client and Server Certificate Installation
- Installed BizTalk Client Certificate in Certificates Store under
a. Current User--> Personal (Private Key)
b. Current User --> Trusted Root Certification Authorities (Public Key)
c. Local Computer --> Personal (Private key)
d. Local Computer --> Trusted Root Certification Authorities (Public Key)
e. Current User--> Other People
Installed SAP Server Certificate in Certificates Store under
a. Current User --> Trusted Root Certification Authorities
b. Current User --> Trusted People
c. Local Computer --> Trusted Root Certification Authorities
d. Local Computer --> Trusted People
e. Current User--> Other People
3. BizTalk Status Solicit Response Send Port(used to call the SAP PI Web service) Configuration
- Transport Type  WCF-Custom
- Binding  BasicHttpbinding
Security Mode : Transport
 Client Credential Type : Certificate
 Proxy Credential Type : None
 Realm : localhost
• Message
 Client Credential Type : Certificate
Client CredentialsClient Certificate
 findValue : CN=< Thumbprint >
 x509Findype : FindByThumbPrint
• Server Certificate
 findValue : <Thumbprint>
 x509Findype : FindByThumbPrint

Hi All,
The reasons why the trigger from BizTalk is failing and the trigger from SoapUI is successful.
In SoapUI configuration we select the Private key of the client certificate and provide the password for the same.
In BizTalk we only have the option of selecting the certificate and we cannot provide the password. Below is the MSDN article for the same
In one of the Site , its mentioned as below, Kindly let us knwo whether the below mentioned will work or not
Organization Security Restrictions::
Each organization may have restriction on using client certificates for security reasons . One such restriction is when a user requests a client certificate a password prompt is displayed . A client certificate can be used only if the correct password is provided
becuase Biztalk Server uses services and services cannot interact with dialog boxes so do not use client certificates requiring password validation.
To Prevent the issue , configure the policy so no password are prompted when a certificate is used this setting is enforced by the Group policy Object (GPO) system cryptography: Force strong Key protection for user keys stored on the computer . If setting
this policy , then the value should be set to "User input is not required when new keys are stored and used "
Kindly let us know whether setting needs to be done in the system cryptography
Thanks

Error when calling an external web service (blank soap action)

I did a lot of searching on this message and did not find an answer. Most of the issues i found related to XI/PI, which we are not using.
There is a web service created outside of SAP for which i generated (from the WSDL) a proxy class in my DEV system, client 050, a few years ago. This was subsequently moved to QA and production, and all is working fine.
Now, i want the same web service to work in client 100. I created the logical port, and the RFC destination, but when i try to call the web service, i get the following error
Server did not recognize the value of HTTP Header SOAPAction
Since only the basis group around here can access the logical port definition,and rfc destination, i have no idea where this information should be set up. I should not have to reimport the WSDL, since the proxy was imported from DEV to QA and it is working in QA client 050. There is something i need to set up, specific to client 100, and i am missing it. I looked in SOAMANAGER, and i didnt see anything even set up there for client 050, so i did set up anything for client 100.
Any help would be appreciated.

I tried adding the web reference in a console app and works fine. In the plugins this can't be done, because the plugins are deploy in database.
I tried another basic test using ChannelFactory. Only want to retrieve some entity through the external web services:
IPluginExecutionContext context = localContext.PluginExecutionContext;
IOrganizationService service = localContext.OrganizationService;
ITracingService tracer = localContext.TracingService;
try
BasicHttpBinding binding = new BasicHttpBinding();
binding.Name = "BasicHttpBinding_IAxxisWcfServices";
binding.Security.Mode = BasicHttpSecurityMode.None;
binding.Security.Transport.ProxyCredentialType = HttpProxyCredentialType.None;
binding.Security.Transport.ClientCredentialType = HttpClientCredentialType.None;
EndpointAddress endpoint = new EndpointAddress(@"http://*****.svc");
ChannelFactory<IAxxisWcfServices> factory = new ChannelFactory<IAxxisWcfServices>(binding, endpoint);
IAxxisWcfServices channel = factory.CreateChannel();
var entity = channel.FindByEntities(new CRM.Application.Context.Dtos.Asegurado( { CrmGuid = "7C3E96C6-C3BC-E411-80DF-0A736AE14667" }, null, new CRM.Framework.Session() { User = "***", Password = "***" });
catch (Exception ex)
throw new InvalidPluginExecutionException(ex.Message);
That test threw the following exception on the GenericParameterAttributes of channelType of factory object:
http://s27.postimg.org/4wf3er8up/Error.png

Invoking an external web service through a JCD with Basic Authentication

Group,
I am trying to invoke an external web service (written in ASP.Net) from a jcd (5.1.2). The web service is guarded by Basic Authentication. I have entered the crudentials into the External Web service environment component and deployed the project. I receive the following error from the .invoke() method:
request requires HTTP authentication: Unauthorized
I have tried the same request through SoapUI using the same crudentials and get back the response correctly. Has anyone tried invoking an external web service with basic authentication through a jcd in 5.1.2 before?
One other item of note. I have another jcd calling a different external web service deployed on the same domain. I hope that this isn't interfering with the execution of this service as it doesn't require any crudentials to execute.

Hey Chris.
I am just starting to write a jcd that calls an external web service but cannot find any sample code nor instructions on how to do it in the supplied documentation. Could you send me a code sample from your one?
Cheers
Matt

Front End internal and external web services

Hi all,
Can someone explain the purpose of internal and external web services URL in front end server. what does it do and what is it used for? and why the external traffic goes directly to it and not through reverse proxy?
Thanks,

They're for multiple purposes. Address books, autodiscovery, meeting urls, mobile clients, etc. There are two because they respond slightly differently based on whether the client is internal or external. External traffic should always reach
it through a reverse proxy, that reverse proxy should proxy traffic received on port 443 to port 4443 on your front end pool.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

External Web Services: parameter SY-CLIENT cannot be fixed

Similar Messages

Maybe you are looking for