External website in a tabset? Similar to frames? iframe?

Does anyone know how you can display an external website within a single tab of the tabset component?
Thanks,
Brent

And you have permission from that other website to display
their content in
your site and use their bandwidth?
If so; iFrame it in your site.

Similar Messages

Headers for external website

Hello,
I am looking to make a header for an external website that
would link back into my own. I'd rather not use frames if possible.
For example, when you search for an image on Google and you choose
an image, a header is shown giving you some options, along with the
page the image is on. How do you make something like this, or what
is that called? Thanks!
Kris

.oO(dehoney)
> I am looking to make a header for an external website
that would link back
>into my own. I'd rather not use frames if possible. For
example, when you
>search for an image on Google and you choose an image, a
header is shown giving
>you some options, along with the page the image is on.
How do you make
>something like this, or what is that called? Thanks!
Frames ...
Micha

Follow up - DNS (internal domain has same name as external website)

Hi,
I am following up with on previous blog entry about resolving an domain internal name to an external website found here:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/4d97325b-ff3a-4f46-ba6e-dc3f4ff978e1/dns-internal-domain-has-same-name-as-external-website
On October 30, 2014
HayashiTech provided a response suggesting the use of netsh interface portproxy on the DC's to resolve this issue. There has been no feedback to this suggestion and I am very curious what opinions are out there for this suggestion as it appears to be the
best option provided yet.
Thank you in advance as well for all the great guidance I have found provided by Ace and his followers.

Interesting question. I've not seen that solution before, but having done a test on my lab setup it certainly seems to work as expected. Eg, using :
netsh interface portproxy add v4tov4 listenport=80 listenaddress=dc1.abc.com connectport=80 connectaddress=www.abc.com
on my DC where I've setup a working external domain name with the www record pointing to the website, and the non-www record pointing to the DC, requests to the non-www address are successfully being redirected to the www address (after confirming it didn't
happen prior to adding the portproxy).
So on the face of it that does look like a workable solution. I haven't used it myself in anger obviously, but the two downsides I can think of immediately to this solution are :
1) This operates as a proxy, so unlike the IIS method that Ace mentioned where it would tell the client to go to the www address instead (so the client connects direct), this method keeps your DC acting as a middle man, eg all communications to that address
go through your DC rather than direct from the client to the website. Depending on what they're doing on the website this may or may not be an issue for you.
2) Since the client is continuing to connect to the DC throughout, if you ever did need the have something on the DC responding to port 80 then you could have issues. That said, according to
https://technet.microsoft.com/en-us/library/cc731068(v=ws.10).aspx the portproxy listenaddress can be a FQDN rather than IP, so that could mitigate any issues there.

SSO to external website from portal

We want to do a single sign on to an external website (non-sap). I know for SAP we can do a logontickets. But for non-sap external websites are there ways to do a SSO? Please help.

please don't cross-post, see SSO to external website from portal
kr, achim

Setup WSUS - Now My External Website Cannot be Accessed via Domain Machines

Hi all,
I recently set up a WSUS server for my company so I can manage updates to domain computers. I got it working and each domain computer now looks to the server (192.168.0.101) for updates. In addition, I have a DC on this machine as well which has DHCP and
DNS setup on it too.
After I installed WSUS, Windows set up a IIS server so it could send out updates to computers. Unfortunatly, local domain (prorepmktg.com) computers stopped being able to access our external website (found at http://www.prorepmktg.com) this is hosted by
a 3rd party and is not a part of our network. I assume this is a DNS issue, but since it is also probably connected with WSUS, I need some help being able to allow access to our external website without disrupting any WSUS functions.
I apologize if this issue is simple to fix, but I am stretching my knowledge of DNS and WSUS here. I am running Windows Server 2012 R2.

I have a DC on this machine as well which has DHCP and DNS setup on it too.
I am running Windows Server 2012 R2.
This is your very first challenge. Have you researched the implications and requirements for installing WSUS on a Windows Server 2012/2012R2 Domain Controller?
Unfortunatly, local domain (prorepmktg.com) computers stopped being able to access our external website (found at http://www.prorepmktg.com)
I'm fairly certain that the mere act of installing WSUS and/or IIS would not have impacted your ability to access external domains.
Does this issue ONLY affect THIS external domain or ALL external domains?
If only THIS external domain, then it also begs the question of what you configured in DNS to allow your internal clients to get to that external domain.
Also relevant is this question: What is the Active Directory Domain Name of your internal domain? I'm much more inclined to think this issue began when you installed/configured DNS, not when you installed WSUS.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

DNS Setup/View external website internally

Greetings all - trying to set up a Mac server from scratch for the first time. Been managing one for a while but didn't actually set it up myself.
I have the beginnings of DNS setup all squared away, but am still looking to figure out how to properly set up my website. Here's my setup. We used to have a joint Windows 2003/10.5 server environment. Windows handled Exchange and DNS, the Leopard box handled everything else (DHCP, web, file sharing, etc). We're transitioning everything to the Mac box in preparation for setting up Kerio MailServer and just to ditch the windows box.
I own companyname.net - that domain is hosted externally by Network Solutions. It's forwarded to my static IP.
Our old internal DNS was hosted by a Windows 2003 box - it had zones for companyname.ltd (the private internal domain) and companyname.net. companyname.ltd was the nameserver. There were two A records handling the website for internal clients - one with a blank name, and one with www. Both pointed to the IP of the Mac server (the current box that I'm transitioning everything to). Everything was hunky dory - internal pings to the web address went to the internal ip, externally it went to the external IP, and everything worked just great.
So in setting up the new DNS on the Leopard box, here's what I have so far.
Primary zone: companyname.net
A Record: macpro : 192.168.1.3 (this is the name of the server)
A Record: mail : 192.168.1.2 (our mail server)
Alias : ichat : macpro.winstongroup.net
The checkhostname thing works fine, Kerberos is up and running, as is Open Directory.
Now, I do not know how to set up our website so that internal clients can view the external website. I tried creating an A record to the server for www, but then that overrides the macpro A record that is the host of the whole thing. I also tried creating A records to the external IP, but then when I pinged it just pinged once, then it seemed like the firewall kicked in and stopped it. I tried creating aliases to companyname.net but every time I did that, Server Admin kept adding on an additional companyname.net to the end of the name (so it would read like companyname.netcompanyname.net). That didn't make much sense to me.
I'm sure there's other people who can view internally hosted sites from the lan - so any help would be very much appreciated!

One minor other question. I prefer the url of our site to be companyname.net instead of www.companyname.net. So now, while www is set up as a server alias, it wouldn't direct to companyname.net, even though that URL was set up in the web services panel in Server Admin. I then created a new alias that was "companyname.net", without the trailing period so it was not a FQDM, directed it at the same web server, and everything seemed to work. Does that seem right - it's working, so it seems to be somewhat right at least!

How to pass a report value to an external website URL??

Hello,
Clicking on one of the fields in a report needs to take me to an external website and should pass the value of the field to the URL
Example:
1. Let's assume external site is http://www.abc.com
2. The values in a column in my report range from 1 to 1000.
3. When I click on say value 21 in my report, the URL formed should be http://www.abc.com/21 and should open in a new browser. Similary, when I click on value 994 in my report, the URL should be http://www.abc.com/994
Note: I have created reports before and linked them(passed parameters) sucessfully to other objects(forms,reports) etc.. But, haven't passed parameters to external websites before!
Would really appreciate if anyone could point me in the right direction.
Thanks
Dev Govindaswamy

Please take a look @
how-to-pass-null-value-to-multi-value
Passing NULL parameter from aspx page to Report Server

How to configure DNS server to redirect all web traffic to one external website?

I'd like to use the DNS service on my OS X Server as a way to force all all web traffic to one specific, external website. Not quite sure how to go about configuring it, though - any recommendations?
(BTW, this is, obviously, not our primary DNS server; I intend to silently update the preferred DNS server for users who fail to complete their timesheets in order to force the issue)

Web clients don't generate uniquely-identifiable DNS queries; there's no SRV request or related traffic that you could select on and spoof. So if you do implement this, everything querying the spoofing DNS server will get the spoofed host, or you'll have to spot specific queries that are likely web queries; Facebook, Google, Bing, etc.
If you still want to implement this, then I'd probably replace the DNS server with a runt DNS server (maybe hack dnsmasq or maraDNS, or create yourself a trivial DNS server) and have that always return the specified IP address. This avoids having to hack BIND to be universally authoritative, which is probably on par with hacking a simpler DNS server to always return a fixed IP address, and the latter is probably easier to undo.
A firewall can spot TCP port 80 and port 443 traffic, unlike a DNS server. Firewalling outbound port 80 traffic is more typical of these requests, and either trap that traffic to a specific web page based on the capabilities of the firewall, or the web proxy approach that Camelot suggests. There are folks that tie access into the web proxies into external authentication and related; that'd be able to do what you want. Web proxies are usually combined with firewall blocks, as most sites want only the web proxy to have external access, too. But this is also rather more pieces than a DNS redirect, too.

Small Business Server 2008 IIS trying to authenticate an external website logon???????

I have a problem accessing an external website portal on the internet, when i select the link on the website it prompts for the username and password i then get an internal IIS authentication error ???
The website is not hosted by us but the error is defiantly from my IIS server.
I have checked everything that i can think of but no luck.
Also it seems to be only this particular website as i can log into other portals like MYOB, ATO ect without a problem.

Thanks for the reply.
When i ping i get a reply from the external IP Address of the website that i am attempting to log on to.
No totally different domain name than our domain name.
The bindings for the default website is only http
The error page i receive after typing in my credentials to the dialog box that prompts me is below.
You are not authorized to view this page
You do not have permission to view this directory or page using the credentials that you supplied.
Please try the following:
Contact the Web site administrator if you believe you should be able to view this directory or page.
Click the Refresh button to try again with different credentials.
HTTP Error 401.1 - Unauthorized: Access is denied due to invalid credentials.
Internet Information Services (IIS)
Technical Information (for support personnel)
Go to Microsoft Product Support Services and perform a title search for the words HTTP and 401.
Open IIS Help, which is accessible in IIS Manager (inetmgr), and search for topics titled Authentication, Access Control, and About Custom Error Messages.

Command Link inside table to external website in popup window

Hi,
I am trying to have a command link inside a table which is on the tables id. I know that if I have control of the destination page I can use setCurrentRowKeyValue. However I do not have control of the external website. So I cannot add it into my faces-config.xml file? I have tried putting a GoLink and a GoButton but I get the following Illegal character in fragment error, when I put my destination URL in. An example of the format the URL is:
http://www.bbc.co.uk/radio?&music=#{row.PrimaryKey}&adf=123
Where I am adding in #{row.PrimaryKey} which is the Id of the row. I would like to have the new page opened into a pop up window if this is possible.
I am not sure if this can be done in the backing bean or whether my approach is the correct one?
Many Thanks
Steve

something like...
<af:goLink text="#{row.PrimaryKey}"
destination="http://www.bbc.co.uk/radio?&music=#{row.PrimaryKey}&adf=123"
targetFrame="_blank"/>Regards,
Neeraj

Hyperlink from MY website to a specific area on EXTERNAL website

i was hoping to use an HTML snippet to accomplish this on iWeb. i've spent several hours on google, and this forum too but found NOBODY addressing this:
i need to create a hyperlink from MY website to an external url. the external page needs to open at a very specific area on the page. i see that this is done on hand-coded websites.
most iWeb discussions were about hyperlinking to lower down on the same page or within the same website where 'anchors' can be used. obviously that can't be done when linking to an external website.

Cyclosaurus i appreciate your quick advice.
the external site i am targeting is:
http://www.tcg.org/international/events/festivals.cfm
scrolling down the page, i want to land on this sub-headline beginning at "Rome, Italy"
i.e.
Rome, Italy
IL VATICANO CADE: The English title of this play by American writer Frank J. Avella is Vatican Falls, but the fi............
if that site is coded so that it can work, i would so greatly appreciate it if you can indicate the actual HTML to put inside the snippet --- i'm an artist, and the rigid 'science' of code is always a challenge. thanks again

Links to External Websites Appearing in my Project

Hi,
Got a strange one here . . . it may be network related I guess, but I'm not sure.
I recently finished work on a large WebHelp project. When I outputed it to HTML I noticed that certain words have been 'hikacked' and used as links to external websites - webopedia.com being the most common:
Federated Instant Messaging (IM)
<a href="http://www.webopedia.com/TERM/F/network.html">networks</a>
allow communications across a variety of different IM <a href="http://www.webopedia.com/TERM/F/client.html">clients</a>
and <a href="http://www.webopedia.com/TERM/F/platform.html">platforms</a>.
A Federated IM network, has an open <a href="http://www.webopedia.com/TERM/F/directory.html">directory</a>
allowing other IM networks to message their users. Federated IM networks
often communicate using open standards, such as <a href="http://www.webopedia.com/TERM/F/XMPP.html">XMPP</a>.
It's almost as if Google Adwords or some other site has taken over my document. These are certainly not links that I have put in; I generally only link to other pages within the same document and hardly ever go out to other sites. The only external links I have added to the project are for legitimate sites (Adobe and Avaya).
Has anybody else experienced this, and does anybody know how to stop it happening?
Any help or advice would be appreciated,
Thanks,
Alex

Hello again Alex
Okay, question here. The document you say is exhibiting the issue, did you create that document yourself? If not, then perhaps whomever created the document to begin with added these links.
I suppose that you could troubleshoot this by creating a fresh document. If the fresh document doesn't have the mysterious links, you can rule out any automated and nefarious forces at play. But if creating the document DOES seem to contain the links, you have other issues at play here that warrant further and deeper investigation.
By the way, is this content originating from a Microsoft Word document or is it just basic HTML pages?
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcererStone Blog
RoboHelp eBooks

Create FB03 attachments to external Website

Hi Gurus,
I have a requirement where my client wants to use FB03 create attachment functionality but at the same time, they don't want the attachments to store in SAP Sood table or related ones for there may be a time when the tables will be clogged.
Is there a way, that when we create attachment, it goes and sits in external website and when ever they want to see attachments it will be pulled from there.
I am totally new to this and have never encountered such scenario. i have tried going through some postings on SCN telling about OAC0, and am not sure on how that works.
Is there a way apart from open text which i can use?
Please if somebody can help giving step by step list it will be really appreciated.
Rgds,
Nitin.

Rob ~ Yes, it's possible...
In your empty Photos page add an HTML Snippet with the following code:
<script type="text/javascript">
parent.window.location = "http://gallery.me.com/wintersgrass"; // change this to your own URL
</script>
...Once published, clicking on "Photos" in the navbar will immediately redirect to your MobileMe Gallery page. (Thanks to Cyclosaurus for the code).

Redirecting to external website from abstract portal component?

Hi,
I have developed an abstract portal component and trying to be redirected to an external website ex : www.google.com
here is the code...
public void doContent(IPortalComponentRequest request, IPortalComponentResponse response)
HttpServletRequest req = request.getServletRequest();
String queryString = req.getQueryString();
String redirectURL = queryString.substring(queryString.indexOf("=")+1);
HttpServletResponse resp = request.getServletResponse(true);
resp.sendRedirect(redirectURL);
OR
RequestDispatcher rd = req.getRequestDispatcher("www.google.com");
rd.forward(req, resp);
But couldn't able to redirect in either ways ..
exception was ... iView not found: www.google.com.
Any help?
Thanks
MMK

Hi Mohan,
When you do a redirect you need to provide a URL. From javadocs
Sends a temporary redirect response to the client using the specified redirect location URL. This method can accept relative URLs; the servlet container will convert the relative URL to an absolute URL before sending the response to the client.
Thus when you provide just "www.google.com" the converted complete URL will be something like http://portalserver/irj....www.google.com whcih of course does not exist as a portal component. Thus you get the error iview not found.
Hence you need to give a full URL and not a relative URL.
Akhilesh

External website in a webpage

Hiya all,
is it possible to show an external website in a layer in
dreamweaver??? Looking to show a video clip that is hosted elswhere
in a window on an existing website.
Thanks
Paul

And you have permission from that other website to display
their content in
your site and use their bandwidth?
If so; iFrame it in your site.

External website in a tabset? Similar to frames? iframe?

Similar Messages

Maybe you are looking for