Externally-loaded animation bounds or width and height

Hi All,
I have swf of a dinosaur walking from left to right across a
stage that is at least 500 pixels wide. If I load it into another
movie and try to access the width using the attached code:
The _width property appears to only display the width of the
movie at that moment - that is from the left part of the stage to
the right-most part of the dinosaur - at the moment the trace runs.
getBounds does the same thing.
If I keep checking these parameters, as the animation runs,
they change to reflect the right most position of the dinosaur.
My question is, how can I, immediately upon loading the
external .swf, find the original stage size that that .swf (the
eventual bounds of the animation if I let run to completion)?
TIA
Steve

i'm not sure it can be done in as3. there's a better chance
it can be done but it would require some testing to see if you
could access the stage from loader's content property. but it might
be that you can only access the stage of the loading swf (if the
loader is added to the display list).

Similar Messages

SWF loader need to load 100% width and height

Hi,
 I have using dashboard in my application.In which the flex pages are loaded using SWF loader. the swf is not loading 100% when i minimize the browser. actually its loading 100% when the browser is full screen mode. suppose the browser is opened in 75% the swf also gets loaded based on the browser size. but after maxmizing the browser the SWF its not expaned to the actuall size of the browser. could you anybody help me plz..?
Thanks & Regards
Muthu

Hi,
 I have used this code to load the swf in the main application:
<mx:Canvas id="dashCanvas" creationPolicy="all" cachePolicy="on" width="100%" backgroundColor="#FFFFFF" horizontalScrollPolicy="off" verticalScrollPolicy="off" >
 <mx:SWFLoader id="dashBoard" trustContent="true" width="100%" height="100%" scaleContent="true" autoLoad="true"
source="@Embed(source='../../../../assets/appl/dashboard/dashboard.swf')" />
</mx:Canvas>
And i have set width and height as 100% in <mx:Appilcation> .
Thanks and egards
Muthu

[svn] 4793: Fix bug SDK-17734 Path with width and height set different than path data has incorrect bounds

Revision: 4793
Author: [email protected]
Date: 2009-02-02 11:20:06 -0800 (Mon, 02 Feb 2009)
Log Message:
Fix bug SDK-17734 Path with width and height set different than path data has incorrect bounds
Fix: When calculating the bounds position we should take into account the implicit scaling factor actualSize/naturalSize. Also did some refactoring, getting rid of the protected method calculateTopLeft.
QE Notes: None
Doc Notes: None
Bugs: SDK-17734
Reviewer: Ryan
tests: mustella gumbo/layout/GraphicElement
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17734
http://bugs.adobe.com/jira/browse/SDK-17734
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/graphics/Ellipse.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/graphics/Path.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/graphics/graphicsClasses/GraphicElement.a s

Thank you so much for replying.
Yes I have removed and reinstalled WMP.
I had good results with the PD6 application installed on the default path onto the C: drive with the one exception that if the application was launched by accident and the user data path was not available, the PD6 application would blow away my custom user path registry settings. Now that I know what they are I have made a .reg file to repair my registry to my desired user data paths.
Installing the application on the removable drive appeared to help prevent me from launching the application by accident and overwriting my registry with default user paths.
So which is the less of the two evils?
If the application directory is not available, windows media player still tries to launch the .msi for installing PD6.
If I install the application to the C: drive but the user data to the removable drive, launching the PD6 application without the user data drive will still corrupt my registry settings for a user data path.
Both these issues seem like a logical (if not easy) fix that should be done in the PD6 application and installation package. I mean really, cannot anyone tell me why windows media player is checking the PD6 application directory? Why in PD4 did we have an option control for setting the user data path from the PD4 application? Why is this option not in the PD6 application, just the installer?
I am given a choice during installation to move the user data to another non default location. Why else would this be provided if not to accommodate my kind of request to store the user data into an alternate location other than “My Document”. Certainly Palm is not trying to force the users on how to protect and store their personal data?
Post relates to: Centro (Verizon)

Get width and height of a dynamically loaded image once it's done loading?!

hello : :
well... i'm taking my first shots at flex after programming
in flash for a year now. it's been fun and i've been picking up on
things pretty well (or so i think), but i come across something
today that i used to be able to do in my as2 programming and don't
know how to do in as3...
in flex, i'm loading an image into an image control (by using
"myImgControl.load(urlString)"). i have a "complete" parameter on
the image control that calls a function just fine after the image
is loaded, but if i try and check the hight and width of the loaded
image once it loads, it comes back as zero. how can i get the
height and width of the image after it's loaded?!
in flash/as2 i used to do this little trick/work-around i
found in a forum (kirupa.com, i think) to find out the width and
height once the loaded image listener checked the loading process
and came back "complete"... in the code below, "imgLoader" is the
movieClip the image was loaded using
imgLoaderListener.loadClip(urlString, imgLoader).
quote:
iTot = imgLoader.getBytesTotal();
iLoad = imgLoader.getBytesLoaded();
if (iLoad == iTot && iTot > 4) {
imgH = imgLoader._height;
imgW = imgLoader._width;
that all make sense?!
basically, it's as simple as this: i need to find something
similar to the above for as3 that will tell me the width and height
of a dynamically loaded image after it's done loading...
so there ya have it. i appreciate any help any of you can
throw my way! thank you so much for even reading this!
: : michael

I assume you have probably already figured this out, but just
in case, there should be an event to listen for after which you can
get the height and width information successfully. I can't remember
the exact name, however. Experiment and see which one works
time-wise.

How to change the width and height of the visible part of the of the report

I have define a report with paper size 'Letter', orientation 'landscape' and 30 columns. Dynamically I am changing width of columns and suppressing many columns of the report.
Mostly using first 16-20 columns and others get suppressed.
Now problem is that when navigating the report thru crystal viewer, a huge blank spaces getting display on right of the report. When we take jump to some part of report thru navigation tree, the whole report gets shifted to left and only blank part is visible and it is required to scroll left.
Even printing is not working correctly.
Is there any way to change the width and height of the visible part of the report in the viewer thru .net classes? Setting the width and height of the report in Load event handler doesn't help.
Example: CrystalReportViewer1.Width = 200; - is not helping.
Is there any other solution?
Please let me know.
Thanks
Mahesh Patel

Hi Yogesh,
Your suggestion 'reportDocument.PrintOptions.PaperSize=PaperSize.PaperLedger;' along with 'PaperOrientation' setting as follow works fine. I tried to switch between Landscape and Portrait depending on report width.
reportDocument.PrintOptions.PaperOrientation = PaperOrientation.Landscape;
But problem with crystal viewer remain as it is.
While navigating report thru crystal viewer, when we take jump to some part of report thru navigation tree, the whole report gets shifted to left and it is required to scroll left.
Thanks for your very good suggestion.
Mahesh Patel

How to create a map that is larger than the game in width and height?

hi,
i wounder how i can create a map(not the design) that is larger than the game in width and height, part of it will appear in the main page and anther part you can move to it after you press the arrow symbol, but the map is just one image so i want put it in line and out line the game page, and the out line part includes buttons and symbols the player can use, but it will be in line and the other part will be out line when you press the left arrow or the down arrow, how i can do that?
and is that possible to animate it so when the player press the arrow, will give it action to start the animation in one sec, i know how to animate it if that possible but i don't know which code i will use for the mouse click with the arrow symbol, and how to use the same code in the same symbol to start anther animation depending on which part of the map is on?

I don't know a lot about mask and masked layers and how to work with the normal layers beside i will use some 3D graphics but not in the background, i will explain all this to you to be more clearly.
first i am using action script 3.0
close ex,
you have 2d map"image" 900*300 pixel.
this image contains some 2d symbols when you click will go to anther normal map (anther normal layer) so they must appear.
your game 320*320 px, and the place the map will show on 300*300, and there's basics objects will be in most pages including the page that show the map so i don't know a lot about how this will work with mask layers.
so you can only see the left side of the map image and what it contains, while there's two arrows one to the left and one to the right there's three cases here,
first when it show the left side(start from x:0 to x:300), the left arrow will not active when you press and the right arrow will start an animation that make the map image move to the mid side in one sec when you press.
in mid side (start from x:301 to x:600) the same left arrow will active when you press to send you back to the left side while the same right arrow will be active to send you not to the mid side but to the right side,
when moved to the right side the same left arrow will be active to send you to the mid and the right will not active when you press and depending on that,
first how to make the large image appear with the three sides in the same place without effecting the other objects "like disappearing them" ?
and the codes i need in the same left or right arrow symbol to make different actions with the same symbol when clicked depending on which part of the map is on.

Java returning incorrect values for width and height of a Tiff image

I have some TIFF images (sorry, I cannot post them b/c of there confidential nature) that are returning the incorrect values for the width and height. I am using Image.getWidth(null) and have tried the relevant methods from BufferedImage. When I open the same files in external viewers (Irfanview, MS Office Document Imaging) they look fine and report the "correct" dimensions. When I re-save the files, my code works fine. Obviously, there is something wrong with the files, but why would the Java code fail and not the external viewers? Is there some way I can detect file problems?
Here is the code, the relevant section is in the print() routine.
* ImagePrinter.java
* Created on Feb 27, 2008
* Created by tso1207
import java.awt.Graphics2D;
import java.awt.Image;
import java.awt.print.PageFormat;
import java.awt.print.PrinterException;
import java.io.File;
import java.io.IOException;
import java.util.Iterator;
import javax.imageio.ImageIO;
import javax.imageio.ImageReader;
import javax.imageio.stream.FileImageInputStream;
import javax.imageio.stream.ImageInputStream;
import com.shelter.io.FileTypeIdentifier;
public class ImagePrinter extends FilePrintable
 private final ImageReader _reader;
 private final int _pageCount;
 private final boolean _isTiff;
 //for speed we will hold current page info in memory
 private Image _image = null;
 private int _imgWidth = 0;
 private int _imgHeight = 0;
 private int _currentPage = -1;
 public ImagePrinter(File imageFile) throws IOException
 super(imageFile);
 ImageInputStream fis = new FileImageInputStream(getFile());
 Iterator readerIter = ImageIO.getImageReaders(fis);
 ImageReader reader = null;
 while (readerIter.hasNext())
 reader = (ImageReader) readerIter.next();
 reader.setInput(fis);
 _reader = reader;
 int pageCount = 1;
 String mimeType = FileTypeIdentifier.getMimeType(imageFile, true);
 if (mimeType.equalsIgnoreCase("image/tiff"))
 _isTiff = true;
 pageCount = reader.getNumImages(true);
 else
 _isTiff = false;
 _pageCount = pageCount;
 public int print(java.awt.Graphics g, java.awt.print.PageFormat pf, int pageIndex)
 throws java.awt.print.PrinterException
 int drawX = 0, drawY = 0;
 double scaleRatio = 1;
 if (getCurrentPage() != (pageIndex - getPageOffset()))
 try
 setCurrentPage(pageIndex - getPageOffset());
 setImage(_reader.read(getCurrentPage()));
 setImgWidth(getImage().getWidth(null));
 setImgHeight(getImage().getHeight(null));
 catch (IndexOutOfBoundsException e)
 return NO_SUCH_PAGE;
 catch (IOException e)
 throw new PrinterException(e.getLocalizedMessage());
 if (!_isTiff && getImgWidth() > getImgHeight())
 pf.setOrientation(PageFormat.LANDSCAPE);
 else
 pf.setOrientation(PageFormat.PORTRAIT);
 Graphics2D g2 = (Graphics2D) g;
 g2.translate(pf.getImageableX(), pf.getImageableY());
 g2.setClip(0, 0, (int) pf.getImageableWidth(), (int) pf.getImageableHeight());
 scaleRatio =
 (double) ((getImgWidth() > getImgHeight())
 ? (pf.getImageableWidth() / getImgWidth())
 : (pf.getImageableHeight() / getImgHeight()));
 //check the scale ratio to make sure that we will not write something off the page
 if ((getImgWidth() * scaleRatio) > pf.getImageableWidth())
 scaleRatio = (pf.getImageableWidth() / getImgWidth());
 else if ((getImgHeight() * scaleRatio) > pf.getImageableHeight())
 scaleRatio = (pf.getImageableHeight() / getImgHeight());
 int drawWidth = getImgWidth();
 int drawHeight = getImgHeight();
 //center image
 if (scaleRatio < 1)
 drawX = (int) ((pf.getImageableWidth() - (getImgWidth() * scaleRatio)) / 2);
 drawY = (int) ((pf.getImageableHeight() - (getImgHeight() * scaleRatio)) / 2);
 drawWidth = (int) (getImgWidth() * scaleRatio);
 drawHeight = (int) (getImgHeight() * scaleRatio);
 else
 drawX = (int) (pf.getImageableWidth() - getImgWidth()) / 2;
 drawY = (int) (pf.getImageableHeight() - getImgHeight()) / 2;
 g2.drawImage(getImage(), drawX, drawY, drawWidth, drawHeight, null);
 g2.dispose();
 return PAGE_EXISTS;
 * 
 * Created By: TSO1207 - John Loyd
 * @since version XXX
 * @return
 public int getPageCount()
 return _pageCount;
 public void destroy()
 setImage(null);
 try
 _reader.reset();
 _reader.dispose();
 catch (Exception e)
 System.gc();
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @return
 public Image getImage()
 return _image;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @return
 public int getImgHeight()
 return _imgHeight;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @return
 public int getImgWidth()
 return _imgWidth;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @param image
 public void setImage(Image image)
 _image = image;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @param i
 public void setImgHeight(int i)
 _imgHeight = i;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @param i
 public void setImgWidth(int i)
 _imgWidth = i;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @return
 public int getCurrentPage()
 return _currentPage;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @param i
 public void setCurrentPage(int i)
 _currentPage = i;
}Edited by: jloyd01 on Jul 3, 2008 8:26 AM

Figured it out. The files have a different vertical and horizontal resolutions. In this case the horizontal resolution is 200 DPI and the vertical is 100 DPI. The imgage width and height values are based on those resolution values. I wrote a section of code to take care of the problem (at least for TIFF 6.0)
 private void setPageSize(int pageNum) throws IOException
 IIOMetadata imageMetadata = _reader.getImageMetadata(pageNum);
 //Get the IFD (Image File Directory) which is the root of all the tags
 //for this image. From here we can get all the tags in the image.
 TIFFDirectory ifd = TIFFDirectory.createFromMetadata(imageMetadata);
 double xPixles = ifd.getTIFFField(256).getAsDouble(0);
 double yPixles = ifd.getTIFFField(257).getAsDouble(0);
 double xRes = ifd.getTIFFField(282).getAsDouble(0);
 double yres = ifd.getTIFFField(283).getAsDouble(0);
 int resUnits = ifd.getTIFFField(296).getAsInt(0);
 double imageWidth = xPixles / xRes;
 double imageHeight = yPixles / yres;
 //if units are in CM convert ot inches
 if (resUnits == 3)
 imageWidth = imageWidth * 0.3937;
 imageHeight = imageHeight * 0.3937;
 //convert to pixles in 72 DPI
 imageWidth = imageWidth * 72;
 imageHeight = imageHeight * 72;
 setImgWidth((int) Math.round(imageWidth));
 setImgHeight((int) Math.round(imageHeight));
 setImgAspectRatio(imageWidth / imageHeight);
 }

Current page (not Document) width and height with JSX

Hi,
I am trying to create a script that saves every page of the document and add its width and height to the name.
So far I managed to get the dimensions of the document using:
app.activeDocument.pages.documentPreferences.pageWidth;
app.activeDocument.pages.documentPreferences.pageHeight;
That's ok when all the pages in the document have the same dimensions (Document Preferences).
However, when I use custom pages that does not work.
I tried the code below but does not work either.
for(i=0; i<nb;i++)
 app.activeDocument.pages[i].documentPreferences.pageWidth;
 app.activeDocument.pages[i].documentPreferences.pageHeight;
I have done some research and I don't seem to find any information regarding custom pages dimensions.
Can you please help with this?
Thanks in advance,
Isko

Main();
function Main() {
 var doc = app.activeDocument,
 pages = doc.pages,
 page, width, height;
 for (var i = 0; i < pages.length; i++) {
 page = pages[i];
 width = page.bounds[3] - page.bounds[1];
 height = page.bounds[2] - page.bounds[0];
 $.writeln("Page: " + page.name + " - " + "width = " + width + ", height = " + height);

Pdf in new window full width and height

Hi i managed to create a new window and add a pdf to it :
var pdf = new air.HTMLLoader();
pdf.height = 600;
pdf.width = 400;
pdf.load(request);
mywin = window.open("",
"pdfWindow","height=600,width=400,top=10,left=10");
mywin.nativeWindow.stage.addChild(pdf)
But i would like to make the pdf scale to the width and
height of the window , i tried width = '100%' but then it doesn't
show a pdf
for the current result see :
Screen

Okay i created a test :
var pdf = new air.HTMLLoader();
pdf.height = 600;
pdf.width = 400;
pdf.load(request);
mywin = window.open("",
"pdfWindow","height=700,width=500,top=10,left=10");
mywin.nativeWindow.stage.addChild(pdf)
pdf.width = mywin.nativeWindow.stage.stageWidth
pdf.height = mywin.nativeWindow.stage.stageheight
But then the pdf doesn't show, i also think this wouldn't
work on resize of the window ?
Or is there a event that is triggered

[svn] 3580: MXMLG-243 - Path does not draw in the correct location when width and height are set

Revision: 3580
Author: [email protected]
Date: 2008-10-10 16:24:50 -0700 (Fri, 10 Oct 2008)
Log Message:
MXMLG-243 - Path does not draw in the correct location when width and height are set
Fixed MatrixUtil.transformBounds to offset the four bound points by the origin
Bug: MXMLG-243
QA: Yes
Doc: No
Review: Evtim
Ticket Links:
http://bugs.adobe.com/jira/browse/MXMLG-243
http://bugs.adobe.com/jira/browse/MXMLG-243
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/utils/MatrixUtil.as

Hi,
For web application problem, please post your thread in
ASP.NET forum.
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. Thanks MSDN Community Support Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and
makes it easier for other visitors to find the resolution later.

Scripting TGetProperty width and height

Hello all,
i have a problem with the flash player in IE6 and FF2.
I have a html page with some flash movie elements on it.
I'm using SWFObject to bind the movies in.
After the onload event is fired, for each flash movie the
javascript function setCorrectSize4Flash will be called to resize
the html container element (embed, object tag) automatically by the
given width and height of the flash movie.
Therefore i'm checking if the movie is completely loaded and
if width and height is not undefined.
So if i'm getting width and height, i'm resizing the
container element to best fit in.
My problem is now, that the same movie used several times in
the same html page has every time different width and height
values. Sometimes the aspect ratio is 1:2 and sometimes it's 2:1.
Is this a problem of the flash player plugin or am i doing
something wrong.
Best regards,
bartmark

Thank you for your answer. But I don't understand:
The question is not the margin. I put in the body margin: 0; padding:0; and there is no margin.
I want to know the viewport: the width and height with the iPad in horizontal position and without the address bar.
This does not coincide with the 1024 x 768. (nor the 946 x 768 if I rest the address bar). I don't understand why
Thank you
Narcís

Flex 4 Premium reference to the Stage issue! width and height seem to be switched??

So I am doing a very basic resize effect with a panel, but if I want it to fill the screen, I have to switch stage.stageWidth and stage.stageHeight. I have also traced them out and they come out as switched values. Anyone else having this issue?
protected function panel1_addedToStageHandler(event:Event):void
 trace(stage.stageWidth, " " , stage.stageHeight);

Hi,
You maybe running into some sort of layout constraint also it depends on how you are initiating the animation, if you are doing it on startup you need to wait for creationComplete to ensure all your dimensions have been calculated for the browser. You shouldn't need to use stage dimensions either. The following code resizes a panel to fill the browser. (note using top/left/bottom/right is a lot smoother than width and height).
David
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
 xmlns:s="library://ns.adobe.com/flex/spark"
 xmlns:mx="library://ns.adobe.com/flex/mx"
 creationComplete="application1_creationCompleteHandler(event)">
<fx:Script>
<![CDATA[
import mx.events.FlexEvent;
protected function application1_creationCompleteHandler(event:FlexEvent):void
pw.valueFrom=pnl.width;
ph.valueFrom=pnl.height;
fillscreen.play();
]]>
</fx:Script>
<fx:Declarations>
<s:Animate id="fillscreen" target="{pnl}" repeatCount="1" duration="1000">
<s:SimpleMotionPath id="pw" property="width" valueTo="{width}"/>
<s:SimpleMotionPath id="ph" property="height" valueTo="{height}"/>
</s:Animate>
</fx:Declarations>
<s:Panel id="pnl" width="250" height="200" horizontalCenter="0" verticalCenter="0">
</s:Panel>
</s:Application>

Can I adjust pixel width and height in iPhoto?

I'm trying to find out if it's possible to adjust pixel width and height of a photo without cropping it. iPhoto Help was no help at all.
Thanks.
iBook Mac OS X (10.4.4)

For uploading to a site this is the way to do it.
If you wanted to use in another application, you can drag and drop if it is supported, and then use that other application to resize. You can also set up a graphic application as an external editor.
I find it just as quick and easy to export to the desktop, then delete the photos on the desktop when I am done.

Find new width and height of a rotated item

hi all,
I have an issue where I have a rectangle that I rotate and I need to know the new width and height of the bounding box of the rectangle when it has been rotated
example:
I have this rectangle shape
so its known width and height is 20pixels x 60pixels
now i rotate the rectangle by 90 degrees
so it looks like this
now its 60pixels x 20 pixels
but all i know is the width height is 20 x 60
how do I calculate the new width and height after rotation?
obviously a rotation of 45 degrees would mean the bounding box will not be 20 x 60 or 60 x 20 so I need to take that into consideration
thanks

If your shapes are not restricted to being rectangels, then the bounding box after rotation can't be calculate from simply the bounding box before rotation alone.
Simples counter-example:
The bounding box of those two shapes are equivalent:
{noformat}
and
{noformat}But after a 45 degree rotation, their bounding boxes are different.
For the exact way to calculate the bounding box for arbitrary shapes, you'll need to consult some geometry books (or wait and hope for a useful hint here, I can't give one).

Fullscreen published in flash - htm 100% width and height file is too big

Hello everyone
I need some help to create a fullcreen flash animation inside
dreamweaver.
What I did was to create a html file published in flash 100%
width and height.
It worked well on my explorer browser, but the size of the
file is 995 k and this would be my index.
When I publish on my provider the file doesn't open, probably
is too big as an index, i don't know.
Is there anyone there that could help me on that one?
Thank you
This is the code on Dreamweaver html
<HTML>
<HEAD>
<meta http-equiv=Content-Type content="text/html;
charset=ISO-8859-1">
<TITLE>back_men</TITLE>
</HEAD>
<BODY bgcolor="#262626">


11cf-96B8-444553540000"
codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,0,0"
WIDTH="100%" HEIGHT="100%" id="back_men" ALIGN="">
<PARAM NAME=movie
VALUE="file:///C|/betoko_webfiles/flash_files/betoko/back_men.swf">
<PARAM NAME=quality VALUE=high> <PARAM NAME=bgcolor
VALUE=#262626> <EMBED
src="file:///C|/betoko_webfiles/flash_files/betoko/back_men.swf"
quality=high bgcolor=#262626 WIDTH="100%" HEIGHT="100%"
NAME="back_men" ALIGN=""
TYPE="application/x-shockwave-flash" PLUGINSPAGE="
http://www.macromedia.com/go/getflashplayer"></EMBED>
</OBJECT>
</BODY>
</HTML>
<script type="text/javascript"
src="fixit.js"></script>

Well, firstly you have > 60 minutes of video, therefore, you should not use the 60 minute preset. Since you have 80 minutes of video, you're probably better off using the 90 minute preset.
Secondly, the presets assume that you are compressing your audio to AC3 with A.pack or Compressor 2 (depending on which version of DVDSP you're using). Uncompressed audio takes up lots of disc space and bandwidth.
Thirdly, the difference between the measured size in the Finder and the size in DVDSP is the difference between true gigabytes (how the Finder measures things) and billions of bytes (how DVDSP measures things). When you Get Info in the Finder, look at the number following the file size in GB... it's a larger number that's so many billions of bytes. This larger number should agree with the number you see in DVDSP. See the DVD FAQ for a discussion of this issue.

Externally-loaded animation bounds or width and height

Similar Messages

Maybe you are looking for