Extigy not connecting to

The other day after plugging a usb device into my laptop my extigy decided to stop working. After a restart with no other perhiperals attached it still refused to connect. I have tried connecting it to other computer but still to no avail. The card switches on as normal with all the lights as they were when they were working.
Has anyone any ideas?
Neil

I have tried but nothing, no pc is showing it as connected when it is even with all relevant software installed, i am stumped

Similar Messages

What do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet

what do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet. i have contacted apple support and they said to change from wep to wpa2 but when i change it to wpa2 and type in password and connect on my laptop it says the saved setting on this computer for the network do not match the require ments of the network

My 2nd gen works fine with WPA2 and AES encryption.
You may need to go back and start over. Reset the router back to factory defaults, log on as the admin, set up security, DHCP, and make sure the IP address pool has enough IP addresses to lease to ALL of the computers/devices that will connect to that the router.

ITunes could not connect to the iTunes Store "Error Message"

I recently added iTunes 7.6 to my Windows XP operating system at the same time when I added an *Ion USB Turntable (TTUSB).* I currently have the 80G iPod with the larger video screen. I added in the supplied software of the EZ Vinyl Converter. The software reads from Gracenote and imports into iTunes okay. But now my PC cannot access the iTunes store to buy songs, read the tracks on the discs, or display new album artwork. The diagnostic read the network connectivety test, the CD/DVD drive, and iPod connectivity tests all read okay. I followed the directions on checking the network settings under the Internet Options Tool "Connections" Lan Settings and the Automatic detection and still no dice. All I get is "Make sure your network is active."
Can anybody help out their?
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
HP Pavilion 061 ED842AA-ABA M7250N
iTunes 7.6.2.9
QuickTime 7.5
CD Driver 2.0.7.3
CD Driver DLL 2.1.1.1
Apple Mobile Device 1.1.4.7
Bonjour 1.0.4.12 (118.4)
iTunes Serial Number 425XXXXXXXXXXXXX
Current user is an administrator.
The current local date and time is 2008-07-06 01:07:54.
iTunes is not running in safe mode.
Video Display Information
RADEON X300 Series
RADEON X300 Series Secondary
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {1C6FC80D-7300-43A2-A78B-9DFA93BF7727}
Description: Intel(R) PRO/100 VE Network Connection - Packet Scheduler Miniport
IP Address: XXXXXXXXXXXX
Subnet Mask: XXXXXXXXXXXX
Default Gateway: XXXXXXXXXX
DHCP Enabled: Yes
DHCP Server: XXXXXXXXXX
Lease Obtained: Sun Jul 06 01:02:58 2008
Lease Expires: Sun Jul 06 02:02:58 2008
DNS Servers: 66.51.205.100
66.51.205.100
66.51.206.100
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Disabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
iTunes has never successfully accessed iTunes store.
** CD/DVD Drive Tests **
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.7.3),
E: HL-DT-ST DVD-RAM GSA-H55N, Rev 1.03
Audio CD in drive.
Found 12 songs on CD, playing time 39:58 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:18:00
Track 3, start time 07:16:25
Track 4, start time 11:23:70
Track 5, start time 15:23:17
Track 6, start time 20:15:17
Track 7, start time 23:04:67
Track 8, start time 26:10:40
Track 9, start time 28:59:05
Track 10, start time 31:31:42
Track 11, start time 33:32:32
Track 12, start time 37:03:57
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 8 10 16 40 48.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
** iPod/iPhone Connectivity Tests **
iPodService 7.6.2.9 is currently running.
iTunesHelper 7.6.2.9 is currently running.
Apple Mobile Device service 1.14.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7
Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD
Intel(R) 82801GB USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801GB USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801GB USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801GB USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801GB USB2 Enhanced Host Controller - 27CC. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
VIA OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Connected Device Information:
HP_ADMINIST (L:\), Fifth Generation iPod (iPod with video) running firmware version 1.3
Serial Number: 8K645xxxV9R
Bus Speed: 61440

I'm seeing this error on some, but not all, of my Windows XP machines. On my personal development XP box, I see this error if iTunes is closed when I try and access iTunes U via my transfer script or Stanford's.
"iTunes could not connect to the Music Store. The network connection was terminated unexpectedly. Make sure your network connection is active and try again."
The errors occured in IE 7 Beta, Firefox 1.5.x, and Firefox 2 Beta. In each case, iTunes U loaded after I clicked the 'ok' button in iTunes. I did notice that in Firefox's case an additional pop-up window appeared that asked whether or not I had iTunes; when I selected that I do have itunes, it transfered me to iTunes but generated the error.
After getting these errors on my Windows XP machine, I tried it on two different lab machines running Windows XP, and didn't get the error message once -- I tried it in IE 6, Firefox 1.0.x and Firefox 1.5.x and they all worked. It even worked with IE 7 Beta and Vista Beta.
Based on this, I think the problem must lie in how Windows registered iTunes, and the handshake just isn't happening properly.
Ken Newquist
Lafayette College

I cannot update my ipad2 to ios5. Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server. Tried resetting network settings, still not connecting. Tried updating iTunes, still not connecting.

I cannot update my ipad2 to ios5. Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server. Tried resetting network settings, still not connecting. Tried updating iTunes, still not connecting.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

Please take the Mac to Apple store to have it checked out.
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Best.

I need to upgrade my 10.5.1 os on my G4/1.25 (I'm having some audio-midi setup problems), but it's a machine that is not connected to the internet. Do I have any options? Thanks!

Friends,
I'm having some audio-midi setup problems on my G4/1.25/10.5.1 machine. I'm thinking that a routine OS upgrade might help. However, this machine is not connected to the internet. Are there any alternate methods for upgrading system software? Thanks in advance!

OK, what you should do is download the updates on another machine and burn them to a disc. Start at this link http://support.apple.com/downloads/#leopard for downloads and find, among other things, the 10.5.8 combo updater that works on PPC machines, plus security, QuickTime and other updates. Going from 10.5.1 to 10.5.8, there will probably be a bunch of things that you should install. Being off the internet with the machine, you can't have Software Update sort it out, so something might get missed, unfortunately.
My suggestion is this: if it looks like you might need a download, get it onto that disc.

Win 7 Pro not connecting to remote Win 7 pro via port 3389

I have a new Dell XPS 8700 Win Pro 64 bit that will not connect to work machine of same specs, i.e, XPS 8700 Win 7 Pro. Ironically an old lap top running XP Pro
will connect to work computer. I have a new Dell laptop with Win 8.1 pro that will not connect either. I tried everything, uninstalled Symantec End point, shut off the Windows Firewall, did a complete
hardware check via Dell Diagnostics, made sure network discovery was on as well as all remote services, turned on RD, changed every setting on the RD dialog box, pinged the external IP and it timed out. None of the forums seem to have an answer and I
am at wits end. I set up 15 machines at work under Win 7 for RD and all are working with Win 7 Pro.

Hello Al Wayne,
What is your current situation?
Please share us more information for better analyzation as Frederik Long mentioned.
Do you mean that the Dell XPS 8700 and laptop can’t RDP to work Windows 7 machines, but the Windows XP laptop can RDP to?
Please take the following steps for troubleshooting:
1. Share us the result of command ipconfig /all in the source and destination computers
2. Check if we can ping the Windows 7 machines from the Dell XPS 8700 and laptop
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Error message "not connected to internet" when trying to sign in to BB id with Mac laptop

I have a Mac laptop and was forced to remove the original BB Link OS when the Z10 launched. I replaced the OS with the current one but now it doesn't allow me to use my Mac's computer name eg. John Smith's Mac book. I can only use a single name. I suspect that is why I'm not getting the itune's library to load. Also, I can't sign into my BB id, I get a message that says I'm not connected to the internet. I've taken the firewall off as I heard that was a solution with Windows but it didn't work. Any ideas?

i have the same problem. I have window 7 pc. I had to use internet to download link so i don't understand why it is not allowing me to use link or do set up. I uninstalled my previous bb desktop driver in hopes that would help. It didn't. I appreciate any help on this forum

Can not connect wireless through Bootcamp Windows XP to Timecapsule?

Any help would be appreciated.
I recently purchased an iMac with Leopard (10.5.2). Today, I used Bootcamp to install Windows XP with SP2. I created a FAT partition of 32 gigs and followed all of the steps (including installing drivers off of MAC OS installation disk 1 while on initial XP boot up).
My wireless network is on a Timecapsule and is "WPA Personal secured". The Mac OS detects the network and connects instantly, my work laptop PC detects the network and connects instantly. However, the newly installed XP detects the wireless network but will not connect. When I try to connect to the network, I receive an error message that basically states "unable to connect...". I do not even get to a screen that asks for me to enter a network key or password. When I try to connect to two other networks in the neighborhood, I at least get the network key screen.
I have gone into the Windows network tools and have tried to manually configure the connection, but I still get the same problem. I thought maybe I had "WPA2 Personal" enabled as the security setting for the network (XP does not support WPA2 out of the box) , but I have it as "WPA Personal".
Can't figure it out. I am new to Macs (about 1 month). The reason I switched was because I could run both Leopard and XP.
Best regards,

Solved my own problem.
FYI
Even though my security settings on my Timecapsule are listed as "WPA Personal", my work PC Laptop kept detecting as "WPA2 Personal". I even removed all security settings from the Timecapsule and my laptop still detected as "WPA2".
I know that XP does not support WPA2 out of the box.
I hooked directly into the Timecapsule via an ethernet cable while in Windows environment. Thankfully, I was able to access the internet. I went to Microsoft and did a search for WPA2 patches for XP. Found one that allows XP wireless connection to WPA2. I installed the patch and was able to detect and connect wirelessly to Timecapsule from XP.
After two days, I have come to the firm believe (don't know the technical reasons why) that Timecapsule is a WPA2 device and that the XP patch is the only way to create initial connectivity. It is sort of ironic that although I wanted to connect wirelessly, I had to first connect via an ethernet hard connection.
Solve one problem, left with another. I have a Epson all-in-one scanner, printer, copier hooked to the Timecapsule. My iMac picks it up fine wirelessly but I am getting nothing on XP. Hopefully it is a simple driver download issue.

Can not connect outside of Lan to with rtsp PVC2300

I have the following cameras set up at my office
1 - PVC2300
2 - WVC54GC
3 - AXIS 225FD
I have a BEFSR81 Router
I have a computer on Windows XP running the surv software to record. Everything with that is good.
I also have 2 desktops.
I have been playing around with the rtsp feed with the pvc2300, but have run into a few problems.
1(a). I can not connect outside of the LAN with RTSP with either the VLC player or quicktime. It connects and asks for a password and then just hangs.
The PVC 2300 local address is 192.168.1.102 with ports 554, 5000-5010, and 6970-6999 forwarded on the router. What am I missing?
1(b) I can successfully connect with my blackberry bold, although when I try to change the default port (554) to something else (I would like to RTSP my the AXIS camera as well, so I will need a different port) it connects on my bold, but then says server is unresponsive. What am I missing here?
2. The voice with the PVC 2300 using http outside of the LAN (internet) lags quite baddly and is choppy. This happens without fail when I have all 4 cameras running, which I understand is upload bandwidth problem. But it also happens when I connect to just the PVC2300. I do have a connection to all 4 cameras inside the LAN to the XP running the surv software, but that is it. Is the my router acting buggy? I have unplugged the router for 5 sec, and it fixed it for a while, but it always comes back. I have donwloaded the latest firmware for the router and PVC 2300 and that didnt seem ot fix it either. Suggestions?
3. This is more of a question. I know the mobile streaming of the PVC 2300 does not include voice. Is there an app or way that I can just get it to my Blackberry. Even if I didnt get the video, voice is sometimes more important to me.
I hope Ive been clear enough in my description, Im very self taught (google is amazing), but I am in no way a techy.
Thank you in advace for your help.
Colin

Glad to hear you are successfully using the SWVMS16. That program is really cool and useful. I just cant tell you how that model of Linksys Router can work for you here (that is not a model we support on this community as its not small business)
Regarding RTSP access, are you also including the mobile.sdp in the URL?
RTSP:///mobile.sdp I noticed in the camera GUI with the newer firmware, you can specify an access code under mobile settings after checking the enable mobile streaming box. That word may be what you have to include, so check that too...
Try this locally first and then remotely is the easiest way to see if you got it right, then it just becomes a routing or firewall issue to figure out.
But your forwarded ports look right and should be opened.
Under advanced settings, you can define an alternate HTTP, HTTPS or RTSP port

Can not connect computer to Cisco Connect -EA3500

Can not connect computer to Cisco Connect -.Receive error msg 82BD0305. Reset to EA3500 to default and reinstalled software.

Reading the manual it says the username is blank, password 'admin'.

Can not connect my wireless printer to the new router.

Can not connect my wireless printer to the new router.

Can you please provide details:
1. The make and model of printer
2. Make and Model of Wireless Router
3. Is your printer connection wireless to router or a cable to PC
4. What have you done or attempted to do to establish a connection?
5. Any further info to assist

Can not connect to Image Browser

Can not connect to Image Browser. Try to open again but no results.

Hi garyrandall,
I'm sorry to hear of the difficulty you've encountered with the transfer of images from your Canon camera.
Please reply with the Camera model you're using and the operating system on your computer.
Please include any error messages you receive.
We look forward to hearing from you!
Richard
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Can not connect to oracle10g release2 database On XP SP2. Help needed

Hi! friends!
I have used Oracle 8 and it was nice. I didn't run Oracle 9i.
Now I installed Oracle10g R2 in WinXP-SP2. There was no problem in installation. But i can't run it. I get the Black SQL screen. But if i give some command it says "Not connected to database".
Oracle 8 version had built in database "emp" and "sal". In start up username and password box used to come(scott/tiger). But here I don't know if there is any builtin database,even there is no place to input username/password. So i cant work with 10g.
So i can't give command like Oracle 8
select *
from emp;
I do not have any network in my Desktop PC.. pls help me how to run and test Oracle 10g database on my machine. Also tell the name of the built in database.
I am much in trouble.
I am wishing thanks in advance to all who will reply.
Regards
Abir Atarthy
[email protected]

In 10g database
During installation is you choose "database creation" option then default database is created.
database name is "ORCL"
you can check in windows registry
On command prompt
cmd>net start
if it is showing "OracleServiceORCL" then database is created"scott/tiger user is also created but in 10g it is LOCKED by default.
so you have to first unlock this user.
Now you can connect with "sys"or "system" but you know their password.
in 10g there is no default password for sys or system, we have to mention during installation time.
if you don't know then you can connect with sys like "SQL> CONN / AS SYSDBA" to sqlplus.

Adobe creative cloud say i'm not connected to the internet, but I am

adobe creative cloud says i'm not connected to the internet, but I am

If you statee more aout your set up about your relation to the Cloud a l9ittle of the history something to go on right now tht is believe it or not ptretty vague.
i do not relly particfipate in the forum but I doubt that the other users will have an easytime helping you without more informtion.
Offhand I wouuld say it was a permissions issue fwiw.

Extigy not connecting to

Similar Messages

Maybe you are looking for