Extra depreciation in one period

Hi guru's,
    we are implimenting AA module.asset transfer date is april 2009.one my user wants to post depreciation for the month of april and remaining months it should be same as per percentages.
for eg:asset capitalised 05.02.2007
   Acq.value=3580.00
   life period 3 yrs
dep till dec 08=949.38
Dep till april =397.7777778(as per calculations)
but they want post dep till apr=1716.32
system adjusting extra amount in month of may they dont want to adjust this amount should be as of april.may onwords dep should calculate as per percentages.
    how we can upload these values can anybody explain me.
Thanks
Ravi

Hi santosh,
   Thanks for your explonaton its helpful but 1 small thing.if i upload perticular asset like below,
   Asset acq date;05022007
   acq.value   3580.00
   dep till december 2008:   949.38
   dep as of april(jan to april current year)= 397.77
   System showing dep posted = 397.77
   Amount TBP for May= 99.44
         but according to user the catch up dep amount 1318.54 it has to include before april i.e insted of posted amount 397.77 it has to show 1716.32(397.77+1318.54)
         If i post through ABAA the amount 1318.54 still its showing Amt TBP for may.required is amount posted is 1716.32 and for may,june.......99.44 like.
         please help on this.
Thanks
Ravi

Similar Messages

In oneasset class i have created 2 assets by using of aso1 after that i acquired one asset for that i run the depreciation for first 5 periods, it has been showing depreciation for those period but if i am trying to run the depreciation for second asset i

in on asset class i have created 2 assets by using of aso1 after that i acquired one asset for that i run the depreciation for first 5 periods, it has been showing depreciation for those period but if i am trying to run the depreciation for second asset it is not showing first 5 periods why it is not showing? Is there any reason?

Hi
Repeat run you can do only for the last depreciation period. For the asset which you are tryin to post depreciation from July to Jan, please check the asset value date which you have given while posting the transactions or in the asset master.
If the asset value date is in July, then deprecaition from July - Jan will get posted in the current month depreciation in total. You will not be able to post depreciation individually month wise using AFAB.
REgards
Malathi

Asset planned Depreciation by each period (Jan -Dec)

Dear friends,
Could some one suggest the Report for List of assets by costcenter with planned depreciation for all periods (Jan-Dec) for forthcoming year, in my example for the yaer 2011.
Thanks in Advnace,
Ram

Hi,
Check - S_ALR_87012018 - Depreciation and Interest
Best Regards,
Madhu

100% depn in one period

Hi,
We have a requirement where for assets having less than say 5000$ we want to have 100% depn in one period, how to achieve this and what configuration is required.

Hi Ravi,
Long time, hope you are doing well. you can achieve 100% depreciation by specifying
Base method as stated percentage. Have all the three options as no
Declining balance as 001
Prd control 003
Multilevel method - create a custom method which calculates 100% depreciation
Thanks,
Zaid

How can I use the RMS.vi over more than one period?

Hi everyone,
I am using the Cycle average and RMS.VI to get the RMS value of a alternative voltage (2kHz). To acquire this signal I am using a differentiel AI of a 6225 card (at 250kS/s) and the RMS value is correct, it works fine. However from what I have understood, this VI calculates the RMS value according to only one period no matter how many samples I have acquired (2000 samples in the VI I have attached). Is this correct? If so, is ithere a way to use it over all of the 2000 samples to get a more averaged value? Or does another VI exist?
I could repeat several time an acquisition of a short number of samples (a period) and make an average but it would take some time and I have to do this with 39 other Inputs on the same card one after the other...
Thank you for your help,
User
Attachments:
Forum.vi ‏76 KB

User_1979 wrote:
....could you tell me if this VI sends a rms value of X compleat periods (even if I have send X periods and a half for example)?
It gives the RMS value of only the newest set of data.
The RMS and RMS Pt. By Pt. work for me, but it depends on how you break out that Dynamic Data from the Express VI, which was why I suggested you didn't use it - mainly because you can't tell what happens to that data when you wire it to a function and it coerces. Actually, I should say, I can't tell what happens to it. You may know, but I don't.
In the attached screenshot, I have "made" a 2k sine wave with an amplitude of 5. The indicators show RMS value.
Richard
Attachments:
rms.gif ‏14 KB

BPC 10.0 NW - How do I make Business Rules run one Period at a time

I was wondering if anyone has a way to make business rules run one period at a time before moving on to the next to the next time period (i.e. January 2014 calc prior to moving on to February 2014). In past SQL this could be achieved with a piece of script *CALC_EACH_PERIOD. Is there anything like this that can be applied in the NW platform for Business Rules? I have some logic that I want to run through a package on multiple periods at once. Part of this logic contains a Business Rule that uses a value from the preceding period. the Business rule appears to be calculating all time periods selected in the package at once so it is missing the piece that is supposed to come from the prior month unless the package is run one period at a time. I need the logic to run sequentially by time period (oldest first) when more than one time period is selected.
thanks,
Keith

Hi Vadim,
Script for the business rule is below, it runs along with the FX_Trans rule in the same package ( I have also attached a screen shot of the actual Business rule its self)
*RUN_PROGRAM CALC_ACCOUNT CATEGORY = %CATEGORY_SET% ENTITY = %ENTITY_SET% CURRENCY = USD //GROUPS = %GROUPS_SET% TID_RA = %TIME_SET% //OTHER = [AUDITTRAIL=%AUDITTRAIL_SET%] CALC = CALC_HIST_USD *ENDRUN_PROGRAM
Thanks, Keith Carlson

Catch up depreciation from past period for PPA write-up

Hi,
What is the best practice or solution to catch up depreciation from past period for the PPA (purchase price accounting) write-up?
We need to write up assets for 2/28/2014 now (August). Once the assets are written up and when the depreciation runs - it will be based on the new NBV. But we will be missing depreciation for the amount which the asset was written up by. How do we catch up with this depreciation?
We tried running unplanned depreciation, but unplanned depreciation runs for the current NBV.

HI,
what do you mean with "We tried running unplanned depreciation, but unplanned depreciation runs for the current NBV. "?
Regards,
Markus

"lock" values of tax depreciation for previous periods

Hi all,
is it possible to lock calculated values of depreciation for previous periods? We need it for the case when e.g. depreciation key is changed. Then we want preserve the values for previous periods and change only the future values. But please note that we want this for depreciation area, which does not post values to GL.
thanks
Zbynek

Hi,
It did not work for me. I changed the useful life from 30 to 20 yrs and then used menu path Edit/Recalculate values. Then I used the Tx S_ALR_87012936 to display the depreciation values for individual months. But all the values were the same, i.e. the values for previous periods were not kept.
So is there a way to keep these values?
thanks,
Zbynek

Depreciation repeat run (period 14) - no areas to post to...

Hi Experts,
We have problem - cannot run Repeat run depreciation (posting to period 14 - audit adjustment)
We did reverse document for fixed asset, therfore we would like to do Repeat run depreciation.
However while we run, the error showing "there are no areas to post to in company code xxx"
Kindly advise. Thank you.

Hi,
- simulate AFAB for period 15 (if exists) for the specific asset and see if it has any entries
- try repeat run for period 14 specifying the asset number in the selection screen
- check for Posted Values tab in AW01N for the asset in question and see if any yellow triangle is seen or any depreciation planned.
Rgds.

Depreciation With skiped periods

Dear experts,
I have uploaded assets from legacy system with the depreciation value uptill end of may 2009. Now in running the depreciation AFAB unplanned puting period six (06), the system is calculation depreciation from january and i intend to post depreciation just for June, so how can i skip the periods 01 to 05.

Hi,
Go to Tcode OAYC.
Select your company code and double click on period in which depreciation was posted
So here please mention FY 2009 and period 5 for depreciation area 01.
So with this system will start calculating depreciation from 06th period only.
This will defenitely fix your issue.
Thanks,
Srinu

If one period is selected,Report is working fine, not for range of periods

Dear All,
i have a problem in nearly 3 reports of Finance
1) Working Capital Requirement Report,
if one period is selected, Report is working fine, but when range of periods is
given in selection screen, amount is showing wrong value.
2)Balance_Sheet and 3) P&L_Statement reportSame problem
E.g Mar07 period will give the results for March08 period and Mar06 period will give the results for Mar07.
Ur valuable suggestion is rewarded.
Regards
venu

Hi,
check for your variable restrictions in the report key figures.
It will show up according to the rsctriction put there.
Try to verify the vlaues with the key figures and if they are amtching then you have some issues with the data loads.
But with your explanation it seems its just the you are looking at the wrong key figure( for actuals you are looking at previous year values)
Or you are using wrong restrcition values at the key figure level( indicators indicating prior values used for actual values).
Hope it helps
Thanks
Ajeet

I'm really sorry i just bay my griAddress again to my phone please grindar extra just for one month and you charge me for one year so i would like to cancel that transaction and pay only monthly many thanks marcel

I'm really sorry i just bay my griAddress again to my phone please grindar extra just for one month and you charge me for one year so i would like to cancel that transaction and pay only monthly many thanks marcel

These are user forums. You are not speaking to Apple. We can't assist you. You must contact Apple directly in your country.
Customer Service: Contacting Apple for support and service - this includes international calling numbers.

Strange problem - Extra space coming before period.

I have a strange problem with CR 2008 SP2. I tried in SP3 also . Same problem exists.
Consider a text like "Configuration.". If I add this text in designer and use a preview is shows like "Configuration.". But when I run the report , it displays like "Configuration .". Note the extra spaces coming before period. I am using win xp . And using win form application. The font used Times New Roman. This issue is common to any text shown in report. Where ever a period is displayed , extra space is coming . How to solve this issue.

There is an "fix" which has been intentionally not documented in release notes as itu2019s a new hidden API added in XIR2 SP4 and XI3.1 that could cause problems with rendering of other fields. To activate the fix, a configuration file has to be added to the project, called "app.config" (.NET 2.0) and it contains the following information. Then rebuild the solution. Please test thoroughly...
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<configSections>
 <sectionGroup name="businessObjects">
 <sectionGroup name="crystalReports">
 <section name="crystalReportViewer" type="System.Configuration.NameValueSectionHandler"/>
 </sectionGroup>
 </sectionGroup>
</configSections>
<businessObjects>
 <crystalReports>
 <crystalReportViewer>
 <add key="AntiAlias" value="true"/>
 </crystalReportViewer>
 </crystalReports>
</businessObjects>
</configuration>
Ludek

Post manual/unplanned depreciation in previous period

Dear Experts,
I really appreciate for your advices on the following issue.
I have posted depreciation up to period 9, 2010. However, there's an unplanned depreciation journal that was missed to be posted on period 8, 2010. Therefore, I tried to create the unplanned depreciation journal on period 8, 2010 (t-code ABAA).
When I tried to execute the depreciation (t-code AFAB) on period 8, 2010 with Repeat, Restart, and Unplanned Posting Run, the depreciation could not be posted. Then I tried to execute the depreciation on period 9, 2010 with Repeat Posting Run and the unplanned depreciation posted through ABAA on period 8, 2010 is posted on period 9, 2010.
I have an objective to post the the unplanned depreciation on period 8, 2010 instead of period 9, 2010 even though the depreciation has been posted up to period 9, 2010.
I really appreciate for your advices on how to post unplanned/manual depreciation on previous period or if there is any other work around available for this matter.
Thank you.
Best regards,
Frans Sunarja

Hi Frans
You have 3 options
Option 1 SAP recommended, but too cumbersome
You can reverse the depreciation posting using ABF1
refer this thread for more details
Unable to post depreciation- Error AA730
Option 2
Else, pass a manual JV to shift the depreciation from current month to previous month.... You can remove the auto posting tick in FS00 for depreciation for the time being
The JV shall be Dep a/c Dr and a Balance sheet a/c credit in Previous period AND opposite entry in current period... This balance sheet account shall be clubbed with Accum Dep a/c in your FSV (financial statement version)
Option 3
Same as option 2.... Use T code OASV to pass this JV
Use Accum Dep a/c instead of a balance sheet account... OASV will allow you to pass JV into recon account
Regards
Ajay M

Sort more sine periods in one period

Hi everyone. I would like to sort more periods of sine waves into just one. I'm having problem with programming it.
I've attached .vi wich does not work correctly.
Help, please.
Attachments:
Sort To One Period.vi ‏33 KB

Seems like your strategy is to sort the values of the rising and falling slope...
How is your data generated and what is the reason why you want to do it this way?
Do you have a constant period?
Here is a way to merge to a fixed period (that can even be a fraction of the sample period)
But beware that the output doesn't have an equal timestep. That would need a resampling.
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'
Attachments:
Merge to fixed period lengh.vi ‏34 KB

Extra depreciation in one period

Similar Messages

Maybe you are looking for