Extra fonts with output server pro

We are using Output Server Pro 5.5 to generate PDF and Postscript. Fonthandling is ok for postscript, but the PDF doesn't use the fonts we want (KIX for postal code and a custom font defined in the template). Can we add fonts to Output Server Pro and if so, where do I have to put them and in what format ?
Thanks,
Michel

If you look in the Help under "Font" you will find several chapters on adding new fonts.

Similar Messages

Add license fonts with Form Server

How to add license fonts to Form Server?

Hi,
I dont know if it is possible with java command but it is possible to add through web application.
I tried it long back on XI R2 SP2.
BO provide classes like:
ILicenseKey
ILicenseKeyBase
see if you can take help of these classes.
setLicenseKey
void setLicenseKey(java.lang.String newLicenseKey)Sets the license key value for a new license key.
Parameters:
newLicenseKey - A String containing a new license key value.
For more information
https://www.sdn.sap.com/irj/boc/sdklibrary.
Thanks,
Praveen.

Problem with output server service credentials

I am having a peculiar problem with regards into the output service starting. I created a username and password in AD for this service for one of our programs to use this to print. So I set this up and associated the service to use this account to login, but whenever I reboot the server the service never starts even though it is setup as auto, so I looked and in the login tab it has the username that I setup, but i always have to re type in the password to allow it to start.
Does anyone have any ideas about this and how to fix this problem that i am having?

Hi Vishal,
Kindly use /XMII/Illuminator?service=logout
Illuminator has to be in same case as shown above and not in caps.
Further, this kind of error generally comes when you miss including some mode or service name in the URL.
Kindly recheck your URL that you are navigating to post logoff.
It should generally go to: http://<Server>:<Port>/XMII/Illuminator?service=Personalization
Thanks,
Swaroop

Which interface to use to run 2 extra screens with a macbook pro 13"

Hi All
Just bought MBP 13" (non retina) and would like to hear about some external monitor solutions in particular which interfaces are used.
Is the USB3 slot best to use with DisplayLink kit or the Thunderbolt and DisplayPort stuff.
My need is to run LogicPro 9 over 3 windows as this will improve my productivity, had been used to just MB White Screen and 1 external VGA Monitor.
Any suggestions would be most welcome...
In anticipation
Shiningheart

Hello, Carl.
Thank you for visiting Apple Support Communities.
Here is the best resource I could find that gives the best option.
About Mini DisplayPort to HDMI adapters
http://support.apple.com/kb/HT4241
Cheers,
Jason H.

Creating PDF's with Central Pro Output Server for AS400 (iseries)

Today we generate spool files on the AS400 (iSeries)using Central Pro Output Server on the AS400. The user now wants to create the spool files as PDF's and then email them as attachments with a password to open them. Can this be done ?

I don't know if there is anything specific about the AS400 version of Central Pro that would prevent you from doing that. The Windows version comes with a task "JFPVMRG" that demonstrates how to create a PDF. Of course, the forms have to include the PDF "Presentation Target" before this will work. There is also a "JFEMSEND" task/agent for firing up the "messaging agent" that would do the emailing. I have no idea if you can require a password before opening an attachment.

Will robo html 6 output work with robo server 7?

I'm sure this is answered somewhere but I have such a hard time searching this forum.... I''m using Robo HTML 6 to create webhelp. Doesn't work with our old X5 RoboEngine. Procurement only offers Robo Server 7. Can I use that with my Robo 6 webhelp output?
thanks!

Hi there
I stand to be corrected on this as I'm not the best resource for RoboHelp Server issues. But I think if you have RoboHelp 7, you need it on both sides. RoboHelp Server 7 and RoboHelp WebHelp Pro output generated from version 7.
Hopefully my colleage and fellow Adobe Community Expert John Daigle or another author more familiar with the Server component will pop in here to confirm or deny.
Cheers... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Are Type 1 Fonts compatible with Windows 8 Pro 64-bit?

Are Type 1 Fonts compatible with Windows 8 Pro 64-bit?
Can anyone point to a specific reference that says Type 1 fonts should or shouldn't work?

Hello Nikhil.
Can you see here?
MAIN MODULE INFORMATION:
   SAP GUI for Windows
   SAP Logon Pad for Windows
   730 Final Release
   7300.1.0.1074
   1337608
SYSTEM INFORMATION:
   Operating system: Windows 8 Pro 6.2 (9200)
You are using patch 0 for Windows 8
Windows 8 is not supported until patch 1 or higher is applied, and for Windows 8.1, you must use
Patch 7 or higher,.
Apart from that the error is not from the GUI side,
See below:
Previous frontend interpretation time   :           109 ms
Previous server response time           :          5078 ms (for 1 roundtrips)
The frontend interpretation time is only 100 ms whereas the server time has taken 5000 ms
Please use a supported version for the OS you intend to use.
You can find this information in note
http://service.sap.com/sap/support/notes/66971
Jude

How do I get Mac Pro with Lion Server to restart at a set time when users are connected?

I have recently configured a Mac Pro with Lion Server, and have set it to restart automatically every morning at 3am. When I arrive in the morning, I notice that it has not rebooted, usually because it states there are users connected. Is there a way to automatically disconnect users so that the machine will reboot. No one is ACTIVELY connected at this time of the morning, but may still be logged in somewhere. I did see where I can log out users after a set period of time when using Workgroup Manager to manage a computer or computer group, but I don't use the server to manage all of the computers that have users log in.
Thanks!

Well, it doesn't necessarily have to be each and every night, but it was for the sole purpose of preventing sluggishness. We had it set up before, as Snow Leopard Server and it would restart every night. It would occasionally be slow and need rebooting, however a manual reboot was not possible by most people in the store as they did not have credentials to screen share and restart it - which would result in holding down the power button to shut it down.
The server is used for the sole purpose of logging in about 50 users just so they can customize their experience, as well as saving items to their own home folders. The store is closed during the night, and there is no reason anyone would be accessing it during the night.

Need help on resolving the issue with adobe output server - error MSG256 & MSG 210 not in .ini file

Hi,
I am using adobe output designer 5.5 for designing the label template and using the Adobe output server for printing process.
In the Jfmerge.ini we given the condition "DiscardUnknownFields=Yes" for ignoring the unwanted fields in the .dat file.
During the process, I faced some issue with the output server in printing the labels.
When the .dat file is placed in the Data folder of adobe, the label is not getting printed in the printer.
The file is move to the error folder and an error file is getting generated which contains the error message as given below:
090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [256]** Message Msg256 not in .ini file **
090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [210]** Message Msg210 not in .ini file **
2009/08/26 02:59:02 D:\Program Files\Adobe\Central\Bin\jfserver.exe: [314]Agent exit message: [210]** Message Msg210 not in .ini file **
The output server is a new installtion and I verified the Jfmerge.ini file. It contains the message details of Msg256 and Msg210.
I also verified the license and it is a valid licence.
Kindly help me out in solving this issue.
Thanks
Senthil

I assume this is too late to help you, but other might need a hint. I had the same problem, and found some possible causes that I posted on http://codeznips.blogspot.com/2010/02/adobe-output-server-message-msg210-not.html.
It is quite likely that you are missing some double quotes around the path specifying the ini file (-aii), if its installed under "Program Files".
Hope this helps anyone....
Vegard

Is Windows Server 2012 compatible with HP Officejet pro 8600 plus printers

Hello,
I am wondering whether HP officejet pro 8600 plus printers compatible with Windows server 2012 - I have the driver installed on the server and deployed - installation of the driver and all was successful but it won't print from the server or on a user's computer from the deployed printers list. No error message comes up, I just click print and nothing happens. If I install it individually on the user computers - it seems to print as a 'network printer' but won't print from the server, and if it can not print from the server then it can not print from the deployed printers list. I was looking up on driver compatibility list online earlier and could not find Windows Server 2012 mentioned on the list - only server 2008 and below.
Essentially what I am trying to find out is whether this officejet pro 8600 plus printer is compatible with our server.
Many thanks,
Michael Peters

Hello Michael, and welcome to the HP Forums.
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial issue. You can do this at the HP Commercial Forums.
I hope this helps!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

What is the problem with fonts changing to myriad pro? Is this problem ever going to be resolved? Its driving me mad!

What is the problem with fonts changing to myriad pro? Is this problem ever going to be resolved? Its driving me mad!

Browser Dog, Amy,
The default font remains Myriad Pro until you change it, either in the RGB/CMYK Startup files or in the preferences, options depending on versions.
Concerning missing font names, I believe this may solve it:
Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
It was first presented in this post #15 by TheUlser:

Sony Charger with output: 5.0VDC 850mA and serves on the Xperia Z1?

I have a Sony Ericsson Type CAA-0002016-BR with output: 5.0VDC 850mA and. Wonder if this charger is compatible with the Xperia Z1, once your charger has 1500mA output 5.0VDC and.
Thank you.

Well,there should not be any problems.However,it is recommended to use the chargers that come with the phone.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Central Output Server View Manager on Windows 7, need patch for jfPreview.exe

Where can I obtain the latest version of JfPreView.exe?
According to the following webpage:
http://helpx.adobe.com/legacy/kb/central-central-pro-output-server-1.html
Adobe Central and Central Pro Output Server 5.7, Windows support extended to Windows 7 (32/64 bit) and Windows Server 2008 R2 (64 bit)
Issue 2 on this page is the problem that I am having:
Issue 2
View manager is a client application for Central Pro. When it is installed on Windows 7 (32/64 bit) and Windows Server 2008 (64 bit), it doesn't work properly.
For Windows 7 and Windows Server 2008R2, IPv6 is installed and enabled by default. On a machine running the Central Preview Agent with IPv4 protocol, the Preview Agent fails to transfer the files. The Preview Agent also reports the following error in the jfserver.log.
“Fails. Exception: [1005] Connect to <host> failed: 10060”
Solution
A patch for JfPreView.exe.exe is available from Adobe enterprise support to address this issue.
I need this patch.
Thank you

I have loaded KB2937636 to the server2012 wsus/sup but that still did not fix the communication issue. I have since removed the KB2937636 from the 2012 server, because when the KB2937636 is installed on the sup server once the 7.6.7600.256 computers
communicate with the server the WUA 7.6.7600.320 gets installed on the clients and then they stop communicating. Very Frustrating!
Please any help would be greatly appreciated.
Thanks
~ZbWinMan
I have attached my WindowsUpdate.log file. When I used CMTrace.exe you can clearly see that the computer talks fine at the beginning, then I installed WUA 7.6.7600.320 and All Communication breaks, then I uninstall to get back to 7.6.7600.256 and communication
works again.
If I uninstall 7.6.7600.320 then the computer communicates back to the SUP server.
so you're using SSL? (port 8531)
weird things might happen when in SSL if hastily configured, causing this weird error, like this for example:
http://social.technet.microsoft.com/Forums/en-US/5d6ae350-9714-471f-aa67-375e657caa11/windows-update-cant-connect-to-wsus-server-which-happens-to-be-itself-after-switch-to-ssl?forum=winserverwsus
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Why all the Font Explorer X server requests?

I recently upgraded to the paid version of Font Explorer, Linotype's Font Explorer Pro X 3.1, on my Macbook Pro running OSX10.6. Every time I launch the app, it goes through a 3-5 minute process where it gives me the following "Connection failed" modal dialog error about 10 times:
"The server (remote server name here) may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
The server being mentioned is my Mac Pro, which does not (or should not) have any bearing on what Font Explorer X is doing. I have no idea why it needs to access that computer.
I get these messages even when the Macbook is running on the same network with the Mac Pro actually connected and files from that machine open on the Mabook's desktop.
These messages never happened with the free version of Font Explorer X, so I'm at a complete loss as to what's going on. I deleted all files related to Font Explorer, including the .plist preference file and the Linotype folder in Application Support, AND I cleaned the font cache. I re-installed Font Explorer X 3.1 after emptying the trash, rebooting and clearing the PRAM. It went through all the normal motions of setup, indicating that it was a completely clean install. But again it goes through that impossible process every time I launch the app. What gives? Does anyone have any ideas?

Have you tried contacting the developer of the software your using, this is the Apple forum.

Nvidia/nvidia-utils 190.42-1 with xorg-server 1.7.1-1 segfault

After today's upgrade, X fails to start with segmentation fault. When I downgraded nvidia/nvidia-utils to 185.18.36-2, xorg-server to 1.6.3.901-1 and related xf86-input-*, it starts to work. Interestingly, neither combination of nvidia/nvidia-utils to 185.18.36-2 with xorg-server 1.7.1-1, nor nvidia/nvidia-utils 190.42-1 with xorg-server to 1.6.3.901-1 works. After downgrading and playing it a little bit, I lost my original crash logs.
I guess I should post the problem here to see if anyone is seeing the same problem, before going back upgrading and hitting the bug again. Of course, if you are interested in my Xorg.0.log, I can produce it again.
And by the way, I'm using arch64 on a lenovo t61p with nVidia Quadro FX 570M. I guess the problem is new, and I don't have any luck with google, yet.

I just encountered this error with nvidia-173xx, I guess the only solution is to manually search for and install the
older xorg packages? And wait for nvidia to possibly* add support for the new xorg?
X.Org X Server 1.7.1
Release Date: 2009-10-23
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-ARCH i686
Current Operating System: Linux Thorin 2.6.31-ARCH #1 SMP PREEMPT Fri Oct 23 11:12:58 CEST 2009 i686
Kernel command line: root=/dev/disk/by-uuid/3902f419-5299-4a4e-8cc7-f31d3d7702a5 ro vga=773
Build Date: 25 October 2009 08:20:56PM
Current version of pixman: 0.16.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 1 13:59:11 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "DontZap" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x81e5f40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 8
(--) PCI:*(0:1:0:0) 10de:00c8:1558:0900 nVidia Corporation NV41.8 [GeForce Go 6800] rev 162, Mem @ 0xb2000000/16777216, 0xc0000000/268435456, 0xb1000000/16777216
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 173.14.20 Thu Jun 25 19:49:59 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
dlopen: /usr/lib/xorg/modules/drivers/nvidia_drv.so: undefined symbol: resVgaShared
(EE) Failed to load /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) UnloadModule: "nvidia"
(EE) Failed to load module "nvidia" (loader failed, 7)
(EE) No drivers available.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
Edit: found my packages at http://www.schlunix.org/archlinux/extra/os/i686/ and did a downgrade,
anubis@Thorin ~/ $ sudo pacman -U /var/cache/pacman/pkg/xorg-server-1.6.3.901-1-i686.pkg.tar.gz /var/cache/pacman/pkg/xorg-server-utils-7.4-7-i686.pkg.tar.gz /var/cache/pacman/pkg/xf86-input-evdev-2.2.5-1-i686.pkg.tar.gz /var/cache/pacman/pkg/xf86-input-keyboard-1.3.2-2-i686.pkg.tar.gz /var/cache/pacman/pkg/xf86-input-mouse-1.4.0-2-i686.pkg.tar.gz /var/cache/pacman/pkg/xf86-input-synaptics-1.1.3-1-i686.pkg.tar.gz /var/cache/pacman/pkg/xf86-video-nv-2.1.14-1-i686.pkg.tar.gz /var/cache/pacman/pkg/xf86-video-vesa-2.2.0-1-i686.pkg.tar.gz
Last edited by 1LordAnubis (2009-11-01 23:07:34)

Extra fonts with output server pro

Similar Messages

Maybe you are looking for