Extra margins when printing double sided

I'm using Word 2007 and have created recipe cards using a basic recipe templete in Word. I have the top margin set to .25 and I'm printing on a regular 8x11 piece of card stock (I want to simply cut the sides and bottom down to make a 4x6 index card).
However, the margin is printing at almost .75 when I print double sided. Any help would greatly appreciated! I've been working on this problem for two days and I bought the printer to print both sides.
Thanks!

Did you ever figure this out? Because my C309g changes my margins when I print double sided, and I can't find any info on it anywhere...!

Similar Messages

Pages print out of sequence when printing double sided

I have an hp5550 deskjet printer that when printing double sided prints pages out of sequence.
HP 5550 deskjet
XP

Hi there blbarbina,
Could you provide the community with a little more information to help narrow troubleshooting? Does this happen in only one application, if so what application? Is this a booklet style document?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

TS3147 how do i change the orientation for documents in pages when printing double sided so that the document opens like a menu?

how do i change the orientation for documents in pages when printing double sided so that the document opens like a menu?
write now the document is printing so that when folded the interior of the menu is upside down.

See also this article about the New Tab page (about:newtab):
*https://support.mozilla.org/kb/new-tab-page-show-hide-and-customize-top-sites

When printing double sided, font is not clear on second side

Hi there, when I print double sided the printing on the back of the first page and the backs of all the pages come out blurred. I can make out the printing but I have to strain to read it. Is there anything I can do so that when I print double sided, the printing on the back of the page is a clear as it is on the front of the page? This only happens during double sided printing, the printing on the front of the page or if I am printing single sided is clear and readable.

Hi @anjema
I have truthfully never heard of an issue like this before, but I'd certainly be happy to help. I wonder if the issue has something to do with how the paper is being pulled through the duplexer, perhaps cleaning the rollers might help.
Please use the following document for helpful instructions to clean the rollers; A 'Paper Jam' Error Displays on the HP Photosmart 7510 e-All-in-One Printer Series. I know the issue is not a 'paper jam', but the steps in Solution 4 are cleaning the rollers
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Flipped even-numbered pages when printing double-sided from Preview

My HP 2015dn printer has the ability to print double-sided. Yet I'm finding that when printing from Preview, the even-numbered pages are flipped 180 degrees. I can see the rationale for this, but I'd like to disable it and have the orientation the same for both odd- and even-numbered pages. There is a setting in the print dialog to "automatically rotate each page," but that is not what I want.
Any ideas?

That fixed it. The pdfs were rotated so that they would appear in landscape orientation on my screen (they're originally photocopies of side-by-side book pages). Well, now I understand the difference between short-edge and long-edge binding! Thanks for your help.

Printer not prompting when doing double sided copies

According to the manual, my Hp 7645 is supposed to prompt when to place the second original in the feeder when doing double sided copying. Well, is not. I've followed all the directions; checked all the settings, but the darn thing will spit out the first copy of the one I'm making and then pull it back in (even when I have put the second original in the feeder) and then spit the copy back out with no double side. What is going on? Any ideas? Thank you for your help.

Hi @Mariposa29
I can hep you copy 1 sided originals to 2 sided copies. Please place the pages that need to be copied on the document feeder, then in the copy menu be sure to select the 2 sided copy option and choose 1:2.
Please let me know if this resolves the issue, thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP Laserjet P2035n is set to print double-sided, but I can't change it in the preferences

Last week i downloaded and printed a PDF file. Since then, my HP Laserjet 2035n is set to print double-sided. Here are the details.
I'm running an HP Pavilion Laptop with Windows 7 Home.
The printer is set up as a network printer.
When I try to print something, it stops after one page waiting for me to re-feed the paper manually to print on the other side.
It's only this laptop that's messed up. My other computer prints fine
When I go to Printers, right click on the 2035n, and select "Printer Properties" and look at the bottom of the General tab, it reads under Features "Double Sided: Yes"
If I then click 'Preferences..." and go to the Finishing tab, under Document Options, the box "Print On Both Sides (Manually)" box is unchecked.
Here's what I've tried:
I have uninstalled and reinstalled the printer
I reinstalled the printer drivers
I have tried reinstalling under a different name
Any suggestions? Can someone tell me where the printer preferences file is so I can manually delete it then reinstall the printer drivers? Is there a tool for the P2035N to uninstal EVERYTHING related to it?
Thanks.
This question was solved.
View Solution.

Hi,
Please try the following settings:
Right click the printer icon, then click Printer Properties.
Click the Device Settings tab.
At the very bottom, uncheck the Allow Manual Duplexing option.
Now try printing and check for any change.
Please let me know of any change,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How to print double sided from my Mac to my Canon MG6350

I have looked up everywhere on the internet and youtube of how to print double sided from my Mac Book Pro. I am using OSX 10.8.5.
All of the dicussions I have looked up before have told me to go to System Preferences>Print & Scan>Options & Supplies> Driver and then tick the little box that comes up and it will allow you to print double sided. I have tried doing this but THERE IS NO DRIVER TAB!!!
I was just wondering if there was a solution to this as I can print double sided from my other appliences, like the PC and iPad, it is just my Mac Book Pro that doesn't work.
It has become a big problem for me as I'm studying at college and I need to print things double sided quite regularly. I really need this to work.

The print dialog has several drop-down menus, one of which initially shows the name of the application you're printing from. If the printer supports duplex, you can choose
Duplex Printing & Margin
from that menu. You should then see a checkbox marked
Automatic Duplex Printing

How to print double sided on Canon MG5400 series?

I have tried to tick the duplex option under the printer driver tab but this only prevents the document from being printed! I am trying to print double sided from my mac mini... I am currently using a printer cable as I have no network available; when I printed using my ipad and the wifi facility, double sided printing wasn't an issue...

My first thought would be it isn't do to whether you are using cable or wifi to connect. ... Could be on though.
Have you looked on the internet site & seen if there is a more recent driver? wag.
Robert

HP Officejet 7410 All-in-One no longer 'automatically' print double sided

After upgrading my PC from Windows XP 32-bit to Windows 7 64-bit my HP Officejet 7410 All-in-One printer no longer prints double-sided automatically. When sending something to print I am presented with only two options: Print One-Sided or Manually Print on Both Sides. If I choose the latter I have to manually reload the paper when prompted. I have tried searching for updates and downloading drivers but nothing has resolved the problem. I've even gone into printer properties printing shortcuts and changed the settings in "Print on Both Sides" to 'automatically' and still I am prompted to reload the paper. It is a real pain when I have to print a very large slide pack especially when the printer decides to pick up two sheets at the same time. I have spoken to HP and they say my printer is old and they cannot help me. It is about 8-10 years old. Any advice would be gratefully received.

Hello Toosweet
In Printer Preferences make sure the duplexer is enabled. Do you have the full feature software installed?
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Can you print double sided on a HP photosmart all in one plus e-B210a

Hi, I hope someone can help, I'm having trouble printing double sided on this printer, does anyone know how this can be done.

As best I can tell, this printer does not have automatic duplex printing available. You need to print the even pages, turn them upside down and reinsert them and print the odd pages, using Paper Handling in the Print dialog. You may need to print in reverse order when printing the even pages, as I recall. It has been a while since I had a printer without automatic duplexing. It is a feature which I insist upon.

Can't print double-sided on my HP printer (laserjet CP2025)

I have owned an HP laptop and printer (color laserjet CP 2025) for about one year. When I purchased the printer it said that the printer was not compatible with Windows 7 - I did not know this before i purchased the printer. I had to reset my computer recently and now do not have the ability to print double-sided. The printer works but I cannot print double-sided unless I manually insert the pages. I had the ability to print double-sided before I reset the computer. HELP! this is the most frustrating experience and I am hesitant to purchase another HP product because OF THIS BAD EXPERIENCE. When under warranty I was able to contact HP and received information on how to get the printer to be fully functional, I can't do that now. Does anyone know how to get this function working? Please help.
This question was solved.
View Solution.

asp29,
For the cp2025, if you have the duplex model (has d in the model name) then this document will help you re-set the printer when using the Unversial Print Driver. Make sure you read the document all the way through and pay sepecial attention to the notes as they explain the process in relation to this product. Please check it out...
Unable to Print in Color or Unable to Auto-Duplex (Two-Sided Printing Fails) after installing the UP...
Here is another document on how to configure Auto-duplex on the cp2025dn model printers:
HP Color LaserJet CP2025dn/x Printers - Configure Auto-Duplex, 2-sided Printing On Both Sides
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Printing double sided odd number of pages

I have Adobe Reader 10.0.2 instalied on my iMac running Mac OS 10.6.7 with a Canon Pixma iP4200 printer. Since installing this version of Reader I have come across a curious problem with printing PDF files double sided with an odd number of pages.
For example, a three page PDF file printed double sided. The first page prints first, then pages 2 and 3 print double sided. This leaves a blank page on the reverse side of page 1 which is INCORRECT and has me puzzled. Normal double sided printing should have pages 1 and 2 back to back and page 3 with a blank page on the reverse.
All my other software on my iMac prints an odd numbered file double sided correctly. It is only Reader 10.0.2 that has this problem and would appreciate a solution.
Have I found a bug in the Reader software?.
Regards
Peter AKA DaftBrush

Hello
I specially created a PDF of three pages with no page breaks or section breaks. The problem still persists no matter what way I set the printing order of the pages, that is automatic, normal or reverse when double sided printing. The same file in MS Word format prints perfectly.
My only solution at the moment is to add a blank page at the end of a PDF document that has an odd number of pages.
I would like to know if I have discovered a bug in Adobe Reader and is there a fix that I can download to solve the problem.
Regards
Peter

How can I get my HP 6525 to print double-sided?

When I try to print from a Word Document, I do not get the choice to print double-sided. How can I make that happen?

Do you get an option for two-sided printing in other programs? What is your operating system?
The driver may need to have the duplexer set as "installed", see the Vista/Win 7 Duplex Printing Troubleshooting Guide here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP 4300 All-in-one not printing double sided

Hello
Here is my setup. I have a HP 4300 All-in-one printer set up on a network. There are two computers on this network, and XP and a vista. The printer is installed on the XP, and the vista accesses the printer via the LAN network (Wired, not wireless).
Here's the problem: When, on the vista computer, I try to manually print on both sides, the only option I get in the "Print on both sides" option in properties is "off." However, on the XP I get the option to do it manually.
Is there anything I can do to enable the "manual" option on the vista?
Thanks.

I'm having the same problem expect with different operating systems and printers. I have a HP Deskjet D1455 that's wired to a laptop with Vista x32. I have another laptop connected to that printer wirelessly that has Windows 7 x64. On the laptop that's connected to the printer, I can print double sided with 4 different options. However, I cannot with my laptop that's connected wirelessly through printer sharing.
At first, it looks like I can do it but once I select "Manual" it disappears and turns off. Any ideas?

Extra margins when printing double sided

Similar Messages

Maybe you are looking for