Extra page with: GET /DevMgt/DiscoveryTree.xml
HP Color Laser Jet CP 2025
Prints an extra page with the following message:
"GET /DiscoveryTree.xml HTTP/1.1
Host: 127.0.0.1.:8080"
Pamment, to resolve this issue you need to disable the "Printer Status Notifications" in the printer driver settings.
To do so, assuming you are using Windows 7, the first thing you need to do is go into your control panel.
Once there, select "view devices and printers" under "hardware and sound".
Right click your printer and select "properties" or "printer properties".
Select the "device settings" tab and there you should see the option to disable "printer status notifications".
If I have been helpful or if you’d like to say thanks you can click the white star under my name to give me Kudos. I really appreciate it!
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
Similar Messages
-
Importing MS Word into PDF adds extra page with document info
I am still evaluating Acrobat Pro, including Life Cycle Designer to create Forms, currently testing converting existing forms made in MS Word to PDF. There is someting that I do not know how to resolve is when I import files from MS Word, an extra page with details info about the document is copied as well. It contains info such as number of pages, author, date of creation etc....20 lines of info.
This becomes akward when inserting the document into an existing pdf...or just create a new form from the Word document....adds the extra page ..
Is there a setup somewhere that I could modify to not have the extra info? or how do I delete it? I try to select the text but cannot (within life cycle)
Thank youIf you are importing into Designer, you should ask in that forum. If in Acrobat, then you might try printing the WORD document to a PDF first and importing the PDF. However, with Acrobat you will not get the form fields that you are preserving with Designer.
-
I HAVE A PRITER "HP COLOR LASER JET CP5225" WHEN I SEND ANY PRINT JOB IT WILL DO THE JOB AND PRINT A SECOND PAGE. ON THE SECOND PAGE THE TEXT IS PRITED ALWAYS " GET /DevMgmt/ DiscoveryTree.xml HTTP/1.1 hOST: 127.0.0.1:8080"
HOW CAN I REMOVE THE SECONDPAGE PRINTOUT ?
PSL GUIDE...
{Personal Information Removed}Pamment, to resolve this issue you need to disable the "Printer Status Notifications" in the printer driver settings.
To do so, assuming you are using Windows 7, the first thing you need to do is go into your control panel.
Once there, select "view devices and printers" under "hardware and sound".
Right click your printer and select "properties" or "printer properties".
Select the "device settings" tab and there you should see the option to disable "printer status notifications".
If I have been helpful or if you’d like to say thanks you can click the white star under my name to give me Kudos. I really appreciate it!
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
Build page with screen definition in XML using XSLT in ADF 11.1.1.x
Hi folks,
I'm figuring out how best integrating Oracle Policy Automation/Webdeterminations in ADF. My idea is that in a ADF Taskflow I first call a Init-session webservice on OPA to initiate a session with facts queried from ADF Components.
Then I would query a Determinations Server Webservice to get the next interview-screen definition. This gives me an xml with the definition of a screen to present. I could create an xslt that transform this to an HTML form. Then I would show a page with this (x)html form included in a container. The user could fill in the question-fields. Then on a command button I would read the values from the HTTP request and feed it into a webservice call to the Determinations Service.
Is a scenario like this possible in ADF? And could you give me some hints to get me on track? Or would you suggest otherwise?
The recommendation from OPA is to use data-adapters. But that are then java-classes based on an java-interface that are to be custom build on a datamodel. And I could imagine several security implications on that.
Thanks in advance.
Regards,
MartienCan you use JAXB to unmarshall the XML document to a Java Class (and create a POJO data control out of the java class) and use it in the ADF pages as form or table or tree table?
Take a look at the following sample how an XML document having a schema associated can be converted to a Java class and used in the UI:
http://adftree.googlecode.com/svn/trunk/TreeSample.zip
Thanks,
Navaneeth -
Prints an extra page with message
Every time I print I get an extra page. I'm only prinitng one doucment and I get a second page with the following message:
userdict/ESPW1{}bind put
Can someone help make this stop?No the printer does not. I was finally able to solve the problem:
1. The X driver will not download at all from Minolta's site on the Mac Pro using firefox or safari as its a .gz file.
http://printer.konicaminolta.com/support/current_printers/pp1250e_sup.htm
2. Found another link to download from Minolta. Installer would not work - it quit with an error - Minolta site says 10.2 or later - using 10.7.4 so maybe not.
http://onyxftp.mykonicaminolta.com/download/SearchResults.aspx?productid=987&fil etypeid=5
3. Found this link instead:
http://onyxftp.mykonicaminolta.com/download/SearchResults.aspx?productname=macin tosh%201250e
Needed to download Unstuffit for Mac to open this file as Mac Pro would not uncompress this file.
4. Needed to manually install the uncompressed text file "PagePro 1250E" (from #3 above) at the following location to make the error go away:
Library/Printers/PPDs/Contents/Resources/PagePro%201250E -
Acrobat 7 Extra pages with comments
Using Acrobat 7 and adding a coment using the Text Tool. When printing the document (14 pages) an extra page is printed after each document page. This extra page say, "No cpomment on this page." Any know how to prevent the extra pages from printing?
Look at the options in print dialog.
-
Printing on Wireless Network with iMac G4 EXTRA Page with jibberish.
Hello folks,
I hope to find an easy fix. In my wireless network environment there are 6 PCs and one iMac G4 Flat Panel (OSX 10.4.6) that share a wireless router, and 3 wireless print servers that have 4 different printers attached.
Everything works very well, except, for when the iMac prints to the Lexmark Optra S 1250 printer. The very first page printed (everytime) has one line of jiberish like this:
[%-12345X@PJL JOB @PJL LJOBINFO USERID = "username" HOSTID = "imac15.local"@JPL S
After this very first page prints, everything that follows is printed perfectly. How do I turn off whatever it is that causes this page to print? When I print to any of the other printers it doesn't occur. It does not occur when any of the PCs print to the Lexmark either.
I thank you all for your time and hope you can help.
iMac G4 Mac OS X (10.4.6) Belkin 54g router, Linksys WPS54GU2 printserversThe question here imho is does it have to be wireless?
If the router is close to the Macs surely Ethernet would resolve any issues and provide fast performance.
If the XP machine is reliable wirelessly leave it wireless, you can always connect that using Ethernet if you want to transfer larger files to / from the Macs. This will also give you some convenience.
If things must be wireless then it'll depend on how much you want to spend. Since you'll need a new fast a or g router (avoid pre-n now, wait for something confirmed to work well with Intel Mac and others). The G4 would need a Wireless Ethernet bridge to give a fast connection since USB 1.1 is just too slow or Ethernet again.
So it depends on you realy and the location of the computers. Nothing wrong with a mixed Ethernet / Wireless network easy enough I have one
Nothing mentioned on router site about incompatibility with Mac OS 10.4.8. Once the router is configured using the web interface or software supplied you'll need to config the computers accordingly.
http://kbserver.netgear.com/products/MR814v2.asp -
For each page printed, a page is printed that has lots of information about the # of words, date, template, directory, etc. etc. How do I stop this page from printing? Thanks
Hi,
Teh specific page more likely being printed due to your MS Office configuration.
Follow Microsoft's artice below and check if that helps:
http://support.microsoft.com/kb/890897
Note: the Office 2007 information should also apply for Office 2010 or 2013
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
Hey everyone,
I'm buidling a multilingual webpage with Muse, i I have 5 masters, 53 pages and when I would like to add 2 extra page a get the "RangeError: Index '0' specified is out of bounds" error. Is there a limit to a website in Muse? how many final pages can it handle?
Thank you for answeringHi,
Please send your .muse file to [email protected] along with a link to this topic so we can check out your file. If your file is > 20MB, use a filesharing service like SendThisFile or Adobe SendNow.
Regards, -
I recently installed the PCL6 Driver (Windows 7) for my HP Color laser Jet 2605dn. With every print job I am getting an additional page. I cannot figure out how to change the settings to remove this page. The page reads (something like):
GET /DevMgmt/DiscoveryTree.xml HTTP/1.1
Host 127.0.0.6:7070
Any clues on how to resolve this waste of paper?
Thanks.
RSAnother possibility -
I don't have a Lexmark printer, but the features offered should be similar -
In the Print dialog screen, look for a pulldown menu showing the current program -
Click it, and select Cover Page from the menu presented -
In the new info displayed, set the "Print Cover Page" choice to "None". -
HI all,
I am getting my ouptut in smartforms . But the problem is i am getting an extra page with logo at the end. How to avoid that?
Here i am using only 2 windows. LOGO window and main window.
Thanks & Regards,
VineelCheck your main window and see whether there are any blank lines inside your main window... if that is not the case check whether you are using any command and calling the new-page in smartform... if yes.. goto command and un-check the tick box goto next page.
Close the thread once your question is answered.
Regards,
SaiRam -
Printing extra pages in smartform
Hi All,
i'm new to smartforms.i got an issue on invoice(smartforms).i'm getting 3 extra blank pages in smartform.how and where should i rectify that.can any one help me please.
thanks in advanceHi Mr Rao & Mr Reddy,
thanks for your prompt responses...added to the question, in the extra page i'm getting spool information.actually the program is set in background.once the invoice is issued the form is sent to printer.and in the spool it is displaying the actual pages only.its not showing the extra pages.but once it is out from the printer,i'm getting the extra pages with the spool information
the information on the extra page is....
user:
host:
class:
job:
these are the four lines i'mm getting on the extra page.could u please help me.
thanks in advance. -
SAP Script output extra page is coming
Dear friends
In my sap script output i m getting one extra page with empty main window. Even i have not used NEW-PAGE Command,
No Empty lines and window size also correct. Can anyone solute for this issue.
Regards
Balamurugan NHi,
check those details:
1) In your SAPSCRIPT contains one page or two pages?
2) In the sapscript check did u assign any nextpage as different page?
Regards,
Dhina.. -
Okidata printer timeout prints extra page after each job
After updating to Yosemite, I get the following problem. When printing to my Okidata C331dn, everything seems fine, but about 25-30 seconds later, I get an extra page printed with the following:
ERROR: timeout
OFFENDING COMMAND: timeout
STACK:
This happens every time I print. I am using the Mavericks drivers via USB (Oki has not updated their drivers, yet).
Any ideas on how to stop this? I am wasting a lot of paper!Hi,
I have had the same problem with an Oki MC560 color NETWORK printer, after upgrading my Macbook to Yosemite.
Now it seem solved after changing the printer network setting "IEEE802.1X" from "NO" to "YES"
(I don't know why !).
Now, after each printing, the printer remain "active" for some minutes, with "Data" led blinking as it should print something else,
and then it goes in standby (without printing the extra page with timeout error).
I hope this help you -
Network printer doing extra pages
I just installed a network printer (NEC Superscript 1800 duplexing laser))
its hanging off a SMC 7004AWBR router (just used as a hub/print server)
I'm getting 2 extra pages with each print. One blank then one with type
Giant letters made of the letter its making, like the *old* baner printers of the 70's & 80's. Its definetly orignating from the Mac since its the account name and computer name and in normal type:
lpd: job Trailer
Date: <no date>
Doesn't happen in Windoze.Hello-
Do you see this when you do a print preview also ?
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
Donald
Maybe you are looking for
-
I've had to re-install my backup files from to my MacBookPro after a software repair wiped out all my data. Now I have two Users identities on my laptop. Is there a way to combine them or get rid of one?
-
DMS document migration from Third Party DMS server(Omnidocs)
HI guys, I would like to migrate document from Third party DMS server to sap DMS server. What is the apporach. 1. The thir party dms server is protected with login name and password. How i can extract data from the software. Please spread your thoug
-
why can't iphone come to norway with leagal norwegian software? I've heard of people that buys the phone in the usa or in the uk and hacs the phone and make it norwegian, but i dont wana do that. I want iphone to come to norway leagaly!!!
-
Lumetri looks NOT showing up in the effects panel
When I open my effects panel I can see the Folder "Lumetri Looks" at the bottom of the list. But it is empty. A few updates before I could see several default looks in that list. Can anyone help to get those Lumetri Looks back into the effects list?
-
Size of SSDs for Photoshop CS5, LR3, Windows 7
Looking at configurations to build a new desktop, I've been reading so many articles on using SSDs for PS CS5 that I'm now confused. I'd like to use one drive for OS & programs and a 2nd for a PS scratch disk. I'm looking at 80GB or 120GB to fi