Extra plan order are created

Hi PP expert
I am facing following prob.
*Mrp type- M3*
*stategy-30(LSF)*
*lot sze procedure - Fixed (1500)*
When cust. Req. come and we run Mrp sytem create extra plan order (3 nos.) after plannig time fence.
So plz tell me why ?
Nitu....

Dear,
The Purpose of Planning strategy 30 is, to Produce for major customers based on the sale order lot size.
However u can plan addtional requirements using the demand management by creating PIR. System will create planned order as in net requirement planning.
Since Becuse requirement type for indep requirements (LSF) defined for Strategy 30 at SPRO.
If u donot want to system allow to create PIR & Planned order create new strategy by copying SG 30 & remove thy requirement type of ind requirement (LSF). and try.
The strategy 30 is production by lot. This falls under MTS scenario only.
But the production plan is created depending on the lot size. Whether it is PIR or CIR they are group till it becomes the required lot size and then only the planned orders are created.
Hope clear to you.
Regards,
R.Brahmankar

Similar Messages

Planned orders are created when Production order is open

Hi Everyone
We have Make order and Make to stock scenarios in the system for various products. When Production order is still open ( Fully confirmed with C015 and partially delivered), system assuming that order is completed and created a new planned order for the undelivered quantity against Sales order.
As per my knowledge MRP shouldn't create new planned orders when old production order is still incomplete. The old production order has status REL, PDLV and CNF.
Any help is appreciate and it is our production issue
Regards
Prasad

Hi,
is the order marked as completely delivered on the Warehouse view? Have you reached the under delivery tolerance for this order with your partial delivery from production? If yes, this would be the reason why the system thinks that a new order is required
Regards
Thomas

Extra planned orders generated though there are sufficient Purchase orders

Hi
For a component material system is generating extra planned orders though there are sufficient purchase orders to meet the requirement.
When i check the pegged requirements for the planned order it gives a message Order xxxxxx(purchase order) possibly contains recursive BOM components
There is no recursiveness defined in the system.
Below are the MRP settings for this component.
MRP type: PD
Lot Size: EX(lot to lot) min lot size is XXKG
Availability check --- 02 (individual requirements)
Please help me in understanding the reason

Hi,
First thing is BOM Where used lst.
Check this component in which are all the BOMs it exists..
If it is showing the BOM for the same matrial?
Check the BOM of the same material..
Regards,
Siva

Planned Orders Are Being Created In The Future Period (About Six Months onw

Dear All,
We are facing a problem that when we execute the product heuristics for a particular location - item, planned orders are not getting generated as per the demand element in the current period but they are getting generated in future period say six months from now... We could NOT understand that Why the system is pushing the orders in future period. We have checked the following parameters :
Calendar is active for the period upto DEC"2012.
Time Streams have been genereted for the particular resource.
Resource(s) do exist in Live Cache.
Sufficient capapcity is available in the current period (as viewed from the resource planning table).
Please advise that what other parameters should be checked in order to get the planned orders in current period. In this regard, we shall like to confirm that we are facing this issue since last 8 - 10 days, earlier, there was NOT such an issue.
With Best Regards,
Sanjeev Chugh
06-JAN-2012

Hi Sanjeev,
Did you maintain any value for planning time fence, and if yes, how big is it? This could be one possible reason why system is not able to plan the orders (also depends on what Heuristics you are using).
In RRP3, double click on your planned orders and check out the start date and the end date. Is your start date also lying in the future, or is it that due to long time in your operations (somehow your PDS/PPMs got messed up?), orders availability got pushed to the future.
I am not an expert in PPDS, but I can only think of different lead times coming into picture which could possibly push your planned orders availability to the future.
See if this helps.
Thanks - Pawan

MPS run, planned orders were created for all levels ?

Hello PP members
I ran a small scenario
material    MRP Type     Low Level    SG           M/T Type
A      M0         000             40              FERT
B               PD              001              40             HALB
c               PD              002               10             ROH
Maintained PIRs(MD61) for material A, and ran MD41( Single Item Multi level Planning)
As material A is an MPS item, I was expecting that it should create planned orders only for material A, but in this MPS run it created planned orders for material B & C. (Looked into MD04, where I see planned orders were created
for all the levels)
As per the MPS run, it will plan only for one level of BOM (in this scenario for material A)
Any suggestions, why planned orders were created for material B & C
please clarify

Just check
System must have created a dependent requirement planned order and not the planned order for requirement you put in demand management for B and C
i.e. if you enter a demand in MD61 for B and C, run the transaction, system will not consider this requirement during MPS run. MPS run will consider the requirement if the requirement for the child is comming from parement where parent is MPS item.
Hence you need to run MRPm for B amd C if teh requirement(not dependdent requirement from A) is to be considered.
I hope you are clear
Edited by: Rajesha Vittal on Jan 28, 2008 8:06 AM

Planned orders are not taking into account the processing time

Hi,
Could you please tell me why planned orders quantities are not based on processing time from the material master.
Materials was set before with 1 day in house production , no matter of lot size.
Based on routings I updated material master with processing time depending on lot size.
What is bottering me now is that planned orders are not taking into account processing time. (e.g. based on my processing time 1000 pce are produced in 3 days, but planned orders show me that 1000 pce are still need in 1 day , but it can not be produced in 1 day ).
what did I miss?
Thanks a lot for any information!

Hello Simona
The in house production time from tab MRP 2 is lot size independent.
However, on tab work scheduling you can define a lot size dependent times.
Please observe that, if you have entered an in house production time, the processing time will not be considered. The F1 help of the field provides the following explanation:
You can define work scheduling times in the material master record in one of two ways:
Either you enter the in-house production time. If required, you can get the system to update this value from the routing.
Or you enter the setup, teardown, processing, and interoperation times. If you maintain these values, the system determines the in-house production time on the basis of lot size.
Therefore, if you want to consider the processing time, you should remove the in house processing time.
BR
Caetano

Planned order is creating before planning bucket for a specific material.

Planned order is creating before planning bucket for a specific material.
Eg: Planning Bucket future: 12 months & Start date- 01/02/2012, but Planned order Availability/Requirement date is 12/23/2011.
What causes this, how to fix it? Please suggest u2026
Thanks
Ravi

Since your planning bucket start date is in the future, so this is normal that the system is trying to satisfy the demand in jan2012 bucket by creating a receipt on Dec23, 2011.
Reasons for RECEIPT to be generated earlier is
(1) There might be a FIRM HORIZON( SNP PROD HOR)
OR
(2) There might be a GR time and the system is considering that time
In Customizing for Advanced Planning and Optimization -> Supply Chain Planning -> Supply Network Planning (SNP) -> Basic Settings -> Maintain Global SNP Settings, in the SNP:GR for Plnd Ords field, you have selected Processing Time.
Blank out these times and see if it works, else do one of the following:
(1) Set Period Factor(LOT SIZE TAB of PRODUCT MASTER) to 1, so that the receipts get created at the end of the bucket.
OR
(2) Create your demand at the end of the planning bucket period
Thanks
Kumar

Maintenance orders are created for FL/equipment only ?

Hi all,
"maintenance orders are created for FL/equipment only".
How can i to understander this sentence, i use t-code: iw31 to create a maintenance order, and the 'Assembly' field can be entered. so how can i to create a maintenance order just for FL/equipment only ?
Thanks and best regards,
Ivy Lu

Hi Praveen,
It's not a message. i got this sentence from the following information:
Q7: When you maintain an assembly in a piece of equipment, is it possible to get maintenance history of the assembly? Do you have to create it as a piece of equipment?
A7: As maintenance orders are created for FL/equipment only, maintenance history can only be tracked at that level, not at assembly level. Assemblies are mere structuring devices to have spare parts linked to an equipment in a structured manner. However, in PM orders, you can mention the assembly along with the FL/Eq. Depending on your reporting needs, an ABAPer could use the 'PM Assembly' field in PM orders.
Best regards,
Ivy Lu

Why some extra XML tags are created when viewed a XML in Adobe Illustrator with Esko plugin?

We see some extra XML tags are created when viewing a XML in Adobe Illustrator with Esko plugin. Why these extra lines are created ?
Screenshot of XML and XML viewed in AI below(the extra XML tags outlined in red):

Hi Graffiti,
Thanks so much for your resply. I am happy to say that the problem has been fixed by my customer updating her version of Adobe Reader 9 to the latest version. I had sent her a few suggestions on how to try to fix the problem including that one from info I had read on the forum etc.. and that was the solution that worked. I am so relieved that I was able to fix the problem and to answer your question the blank pages were only graphics no text but they were the only pages that the graphics took up the whole page. I thought that was strange and had her change a setting in preferences for printing large images a solution I read in the forum but it did not work.

NB Type Planned orders are not Displayed in the Order Information System

Dear All
We have one material with Proc. type F.
We have entered a sales order for that item & run MRP ( MRP type PE)
No strategy is assigned to the material.
MRP has created a Plan Order which is of NB type & in MD04 it is showing SDEB against Plan Order.
Now we are not able to see this Plan Order in COOIS.
Although it is visible in MD04,MD16.
Can anyone tell me whether COOIS consider only those plan orders which are of E ( In house Prod ) category ?
How can we display that in COOIS ?
Abhishek Garg

Dear,
COOIS is used for production orders or planned orders olny and it will show u Order information relevent to "E" type procurement.
You can use ME5A

Planned orders are not converted into process orders in ECC.

Dear All,
The issue is that Planned orders with conversion tick are not publishing in ECC as manufacturing orders. We did check the relevant master data consistency between APO and ECC and it seems fine.
We have tried to send the conversion from APO to ECC,all the orders stuck in the R1P inbound queue with error - Order no. XXXX does not exist
Message no. C/006.
Based on above message and error we found SAP Note 515740 - Inconsistencies in table CIFORDMAP for this issue.
Used the transaction SE38 and created RCFORDCH report and 'Checking inconsistencies in table CIFORDMAP'
Here it shows order series stuck in queues no longer exists.
But not sure how to reconcile the inconsistency in the CIFORDMAP table.
Would appreciate your advice.
Regards,
Sajit SIngh

Hi Sajit Singh,
Could you take some sample items struck for order conversion and check
whether active PPDS & SNP PPMs available.
In some cases, conversion will be affected for want of PPMs. If it is the
case with you, try generating the PPM first for that sample item and retry
converting the orders.
Could you please check and confirm this.
Regards
R. Senthil Mareeswaran.

After MRP planned orders are not getting generated?

HI,
Our bussiness is make to stock and repetetive manufacturing.
We have a prob in running MRP, i enter the demand in MD61 on day basis and after running MRP for some materials all planned orders getting generated wrt to demand but for some materials only some planned orders getting generated means it's not taking full demand ex i have material A and paln is 1000 for 10days i entered demand in MD61 for 10days 100 each and if B material is having same 1000 demand so i enter 100 each then i run MRP and the out put is im getting 10planned orders with 100 each qty for A material where as for material B im not getting full 10 orders only 2 or 3 with 100 each what could be the reason ?
Thanks
KK
Edited by: kiran kumar on Mar 23, 2010 10:19 AM
Edited by: kiran kumar on Mar 23, 2010 10:20 AM

Dear Kiran,
As your saying it is Make to Stock, system will consider Availble stock in Net Req. Calculation
what is startegy mainatined for A & B
if you go with Strategy 11 then system will not consider the stock & Creates the requirements
Regards
Madhu

Background MRP Run Some times Planned orders are not generating.

Dear All,
We run MRP in the background at plant level once in a month. Some time we do not get planned order for the material in MD04. Than we run MRP (Selected material only) manually through MD01 considering MRP control parameter 13132.Than only we get planned order. Plesae let me know why it happens? Please give your comments on this.
Thanks & Regards
Kundan Kumar

Dear Kundan Kumar,
First check the output list or the results of MRP run in SM37,find out for how many materials it has
throwned out error,I hope in this list you can find out the materials.
Then the next step you have to check once again the material master settings.
Instead of running in MD02,first check whether was there any issue in master data,or if this happening
repeatedly for the same materials and work around.
Regards
Mangalraj.S

Two order are creating in multisite environment

HI Guys,
we have multisite environment in our application one is .com site another is .in site
for both sites we are using same ear file but
while creating orders we are getting two different orders for both sites
we are getting different orders for each site
how it is possible in atg

Response to below query:
how it is possible in atg
If both sites are not sharing shopping cart, Both will create their own order.
So assuming when u are refering to shoppingcart.current, since there is no order, It's creating new order.
Refer this Oracle ATG Web Commerce - Sharing Data
Thanks,
Nitin.

Planned order are showing in PWB even outside the View Recommendations for (Days from Today) set at preferences

Hi
We have set PWB preferences View Recommendations for (Days from Today) as 10days,
But in supply/demand the datas are showing outside this time limit.For example if I saw today (04-Nov-days),only 10days from today suggested order dates order should show.But it is showing even orders in dec also.Any setup we mssed?
Please guide us
Regards
VKPK

Hi
We have set PWB preferences View Recommendations for (Days from Today) as 10days,
But in supply/demand the datas are showing outside this time limit.For example if I saw today (04-Nov-days),only 10days from today suggested order dates order should show.But it is showing even orders in dec also.Any setup we mssed?
Please guide us
Regards
VKPK

Extra plan order are created

Similar Messages

Maybe you are looking for