Extra power cable?

I just got my new Apple TV today...
Is the new Apple TV power cable a standard connector? Where can I get one?
It's great that there is no power supply brick to deal with!
I want to be able to move it from the family room to basement, but not have to move the power cord.

will it be harmed if it is plugged in using the cable from the previous apple tv?

Similar Messages

  • Extra power cable needed for a SATA drive in a G4 AGP "Sawtooth"?

    If one adds a SATA controller card and a SATA hard drive to a G4 AGP "Sawtooth", will a power cable like the one at the below link be needed, or would the necessary power cabling ordinarily come with the drive?
    [http://eshop.macsales.com/item/Micro%20Accessories/SATAPAY>
    -John

    Thanks for the additional information, japamac.
    That would be Left (or right angle 270º) for the data cable.
    Which of the below data cables would be more appropriate, the 18" long one or the 39" long one?
    [http://eshop.macsales.com/item/Micro%20Accessories/SATA18L>
    [http://eshop.macsales.com/item/Micro%20Accessories/SATA39L>
    Power connectors would be a left angle 90º to get wires going up.
    I found the below two (the first is the same one linked near the top of this thread):
    [http://eshop.macsales.com/item/Micro%20Accessories/SATAPAY>
    [http://eshop.macsales.com/item/Micro%20Accessories/SATAPA>
    Is it okay to have one of the ends of a "Y" cable remain unconnected? I've done that with my existing ATA power cables, but I wanted make sure that that is also okay with the SATA power cables.

  • Early 2008 MacPro:  How to fish out extra power leads for periph?

    How do I get access to the extra power cables buried behind power supply so that I can hook up my new GTX480?
    +, GTX480 has 2 4-pin "whites" & 2 6-pin "blacks;" is one pair redundant? Which ones do I use?
    -- Jason A.

    " . . . ITS firmware . . ", implying fw on the card has to be changed, not EFI. I'm awaiting power cabling from apple, 6-pin; we'll find out in 2 days. Let you know. --Jason.

  • Bootcamp Windows won't display without power cable attached

    Hey guys, I have a strange problem and I don't know when it first arose.
    I have a MacBook Pro which I use a VGA adapter to have 2 monitors running (my laptop screen and the extra monitor). This runs fine in OSX.
    When I try to use the same set up in Windows I get weird results. It works fine while I have the power cable plugged in. When I remove the power cable only the secondary monitor shows and the laptop's monitor powers down. If I don't have my VGA cable plugged in and try to run Windows with just my laptop screen, I can only get the screen to display while the power cable is in. As soon as it remove the power cable, my laptop's monitor powers off. It comes back on when I reattach the power cable. When I have the power cable in and the VGA cable in, both monitors display fine
    Does anyone have any idea what this is about? I reckon its something to do with starting to use a 2nd monitor on OSX, but I have no idea where to start.
    Thanks in advance!

    Since I heard other people had DVI
    connections working, I tried that, and it worked.
    Then, I plugged an analog monitor back into it, and
    that worked too! Seems like it just needed a kick
    (weird).
    I too have tried all manner of combinations and restarts to get Windows XP output to SVGA data projector. I get picture during windows start up and then it disappears - never to return once XP has loaded.
    What order do you use to link up all the bits? is there a way to toggle external monitor in XP via boot camp on a Macbook Pro?
    macbook pro   Mac OS X (10.4.6)   2 GHz, 2 GB, 7200rpm

  • I need a power cable for an AirPort Express

    Hi,
    When I went from a DSL service to Comcast, I had to move my AirPort Express to a spot in the house without a convienent power strip, so I stole the power cord from my spare power adapter for my MacBook.  Therefore, I now need to get an extra power cord.  Unfortunately, I can't find the power cable by itself on the on-line Apple Store and the folks at the brick and mortar store suggest I just by another $79 power adapter since it comes with a poer cord (but isn't that a bit overkill?). 
    Does anyone know a part number?  Perhaps I can order one if I just have that number.
    Thanks,
    Rob

    I'm not aware that Apple sells the extended power cable by itself, but they do (or did) sell it along with audio cables as part of a kit, called the "AirPort Express Stereo Connection Kit with Monster Cables." It is Part #: M9573LL/A.
    You may also find that by contacting Apple Support directly they may be able to provide this cable or check out outfits like Other World Computing (OWC) or DV Warehouse. Also, I just ran a Google search and came up with the following set of links: Apple Power Cord

  • Power Cable extensions

    While normal IEC extension cables fit into Macs, does anyone know if you can buy cables with the extra rectangular plastic as supplied with Macs?
    I've recently heard that UPS manufacturers only cover equipment damage if plugged directly into the IEC sockets. However, I have tended to use power strips so that I can plug the Apple supplied cable (with 3 pin UK plug) into a 3-pin UK socket, which then goes into the UPS.
    One factor which makes me reluctant to use a standard IEC extension cable is that they don't make as secure fit as the proper Apple cables - and I'm worried that despite being attached to a UPS, the cable is more likely to come loose or get pulled out by accident.

    Check with the manufacturer about that. It's not the case with any of them that I've ever run into. Most UPS manufacturers recommend extra power line filtering for your equipment, and sell power distribution units, which would make it impossible to plug your IEC power cord directly into the UPS anyway. I think you're worried unnecessarily.

  • Extra power for ipod touch 3g

    i use my ipod touch  3g on a microphone stand ! I need extra power, do i need a cable or can i use an external battery ?

    Get something like these:
    http://www.amazon.com/Maxell-Rechargeable-Back-Up-Battery-Pack/dp/B0007XCT18
    http://www.amazon.com/Com-Pad-Power-Mobile-Battery-Charger/dp/B00HH7M87W/ref=pd_ sim_sbs_cps_9?ie=UTF8&refRID=0P6P0M0WJYZ20HJ6PVRB
    http://www.amazon.com/Jackery-Fast-charging-Aluminum-Portable-Capacity/dp/B00AAN MVNQ/ref=pd_sim_sbs_cps_10?ie=UTF8&refRID=0P6P0M0WJYZ20HJ6PVRB

  • IMac 2010 randomly shutting down, only reboots when power cable is unplugged and replugged

    Specs
    It's a stock 21.5inch iMac mid-2010, with the addition of some extra RAM - two more 4gb sticks bringing it up to a total 12gb - that I've had installed for roughly 6 months with no problems.
    No problems with my Mac since we bought it from the Apple Store until the last couple of days when this started happening. I don't have AppleCare and obviously I'm out of warranty.
    Problem
    Seemingly random shut downs. I've tried to work out if it's to do with overheating, but I've been playing some graphically intensive games today and that hasn't killed it. The strangest thing is that most of the shut downs are when it's not even in use - the next time I sit down to use it it has been turned off.
    I don't think this is a software problem as it's been happening on the OSX and Windows partitions.
    Nothing happens when I press the power button until I unplug the power cable, wait a few seconds, plug it back in again then press the power button. This makes me wonder if it's a problem with the power cable? Any tests I could run?
    Any ideas? Tests I can run? Or is it a lost cause?
    Thanks in advance!

    After further testing, it seems to only be powering back on if I leave it unplugged for about 20 seconds. Is this something to do with resetting the SMC?

  • Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

    Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

    Please take the Mac to  Apple store to have it checked out.
    Genius Bar reservation
    http://www.apple.com/retail/geniusbar/
    Best.

  • Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

    My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
    I have had this working previously but at the minute it seems to not be playing ball....any thoughts
    Thanks
    Dan

    BUMP
    Any ideas?

  • Does anybody knows where can i buy a replacement AC power cable for my cinema display 27"?

    Does anybody knows where can i buy a replacement AC power cable for my cinema display 27"?

    It may not be the same molded plug but I would think any normal 3-prong computer power cable should work.
    How about this one?
    922-6529 Power Cord - Apple Cinema Display
    I've always had the theory that if you put two computer power cords in a drawer they will breed and you'll end up with a lot more!   My parts drawer is always full of them.  They like to knot up by themselves as well!  Maybe that's how they breed.

  • My deskjet switches on as soon as power cable is connected & displays Error codeOXB040209C

    As soon as power cable is connected my printer swiches on light flashes & Error codeOXB040209C is displayed no further processes can be selected & computer does not recognise printer. My operating system is  windows 7 64-bit

    Please follow the instructions here in order and answer all questions in detail.
    http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Want-Good-Answers-Ask-Good-Questions/td...
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Ipod touch 4g- displays power cable on screen and won't work- help!

    My son got an ipod touch 4g for christmas today but we can't get it to work. It's charged and brand new but the screen shows a power cable and itunes icon but won;t let us do anything other than turn it on and off. can anyone help?

    Can i suggest that you buy a new one, or get it checked out but the apple boffins at you nearest apple retailer

  • I live in the US but am moving to the UK. I have a iMac and want to know if I can just exchange the power cable or will I need a transformer to be able to use it there?

    I have had my iMac for about a year and have just found out that I am moving to the UK from the US. I want to take it but I don't want to damage it. Can I just get a replacement power cable in the UK (like the international switchable plugs for iPads) or will I have to use a step-down transformer? Thanks

    Just the plug-end needs changed.  I the UK you should beable to find the cord that plugs into the back of the iMac and has the correct wall-end.

  • I am moving to the uk from oz and was wondering do i have to replace the whole power cable for my mac book 15inch pro....or can i just replace the actual plug in the wall part ..if i can what is this called as when i look on line it just comes up with the

    i am moving to the uk from oz and was wondering do i have to replace the whole power cable for my mac book 15inch pro....or can i just replace the actual plug in the wall part ..if i can what is this called as when i look on line it just comes up with the complete power unit...it seems odd that you have to buy the whole unit again...thanks.matthew

    All you need is a plug adaptor, if required. Apple sells an adapter kit:
    http://store.apple.com/us/product/MB974ZM/B?fnode=MTY1NDEwMQ&mco=MTA4NDE3MDQ

Maybe you are looking for

  • How i can assign multiple values to tabuler text item (Help)

    HI IM PROGRAMMING ONE FORM AND I PUT THERE TABULER TEXT ITEM I WANT ASSIGN 63 VALUES TO THIS TEXT ITEM ONE BY ONE BY CODE I MEAN PUT FIRST VALUE IN THE FIRST TEXT ITEM ROW THEN SECOND TO THE SECOND TEXT ITEM AND LIKE THIS UNTIL I REACH TO THE LAST I

  • HT4859 how long does icloud back up take?

    I am backing up 5.9 GB from my iPhone to iCloud. It seems to be taking forever. Any suggestions as to how I can make this a faster process? Thanks!

  • How to call a function in DLL file, while writing test scripts in ATML standards

    Hello all,             I am trying to develop test scripts in ATML standards. I need to call a function in DMM.dll file. How can i do that in ATML standards, please explain with some example ATML standard XML file. Someone please help me in doing so.

  • Bluetooth adaptor?

    I just bought a mac mini and now I am looking at bluetooth mouse and keyboard on ebay. Because the mini has built in bluetooth, does that mean that I do not need to buy the bluetooth adaptor? And all I will need is the bluetooth mouse and keyboard?

  • How to wirte the cursor more near the XY position

    Hi, I have the following program attached: "Cursor_name"". I need the cursor name to appear more near the XY position (point). How can I do this? Thanks, AS Attachments: Cursor_name.vi ‏42 KB