Extra spacing between words in a line when an icon is inserted

Why do i see extra spacing between words in a line when an icon is inserted. Can someone please help me fix this issue as this is affecting readability?

Third option is to reference the image and show it below the paragraph.
The size of the image is in your control and if it needs more space than the text, it is going to take it.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Similar Messages

Uneven spacing between words when printing or saving as pdf

I'm trying to print to my hp laserjet 5mp from MS word. document looks fine on screen, but when printed the spacing between words is all messed up. Same thing happens if I "print/save to" pdf file. I downloaded the driver again for the printer, but not helping...

I suspect a duplicate or bad font, open Font Book in Applications and use it's tools to check.
Do you know which Font it is?

How do I delete extra spacing between paragraphs?

I have created a PDF but when I edited some sentences, it left extra spacing between paragraphs. How do I adjust the format so it is double spaced and how do I get rid of the extra spacing?

You don't, to be honest. Editing a PDF is a desperate last resort, for when the original is lost, cannot be had for any amount of money, and the backups were eaten by termites. So there is no situation ever in which you should be editing a PDF you created. Rather, make the correction and remake the PDF. Sorry to be blunt, but it's best to really understand how desperate you have to be to edit a PDF.

Hi-In Script Editor how can we maintan gap between words in one line

Hi,
Can any body help on how to maintain gap between words in same line?
Thanks in advance

Hi,
is it a Hard-coded text or a variable text.
If its a constant & Hard coded text then u can directly maintain by using space bar.
if its a variable text just define a paragraph format with Tab positions as per ur requirement of space..
Hope it helps!!
Rgds,
Pavan

Spacing between Words of Variables in Header

I have spent a lot of time on this and tried everything I can think of, and I have been unable to find a similar thread on this forum. I have now given up and come here for some guidance.
The template I am using is set up with A4 paper size, double-sided (right-side 1st), margins are top/bottom 2.54 cm, inside/outside 3.17/1.9cm. My headers and footers are system and user variables and are mirror image. The headers are set up with the Running H/F 1 and Running H/F 2 underneath it on the left of the left page, on the right of the right page I have a user variable with Running H/F 2 underneath it, the company logo is opposite in both cases. The footers have user variables placed left, centre and right.
All these variables work fine except for the user variable and Running H/F 2 on the right hand page. On the body page and master page extra spacing appears between the wording.
Thank you for any assistance.
Kerrie

Hi Sheila
I am using FM 7.2 p158.
I had not created PDF or even printed it, it was just showing on the screen.
I checked the maker.ini as you suggested and it did need activating. The setting was "DisplayUsingPrinterMetrics=Off" I have now changed this to "On".
It worked, I would never have solved that by myself.
Thank you very much.
Kerrie

Unwanted line spacing between rows

Tables have 0 borders, cell spacing and padding. I use DW
MX2004, pc platform xp windows. I have 3 rows, inserted a
navigation bar,. There is extra "spacing" between the rows above
and below my navigation bar. What is the problem??? See page :
www.sodapopscott.com/index2.htm ??octoberben

You need to zero out the cellpading and cellspacing.
Highlight your main
table and make sure you enter 0 in those fields in the
property inspector,
so that you have:
<table width="770" border="0" cellpadding="0"
cellspacing="0">
Leaving those fields blank does not mean they are set to
zero, you need to
implicitly set them to 0..
Nadia
Adobe� Community Expert : Dreamweaver
http://www.csstemplates.com.au
- CSS Templates | Free Templates
http://www.perrelink.com.au
- Web Dev
http://www.DreamweaverResources.com
- Dropdown Menu Templates|Tutorials
http://www.adobe.com/devnet/dreamweaver/css.html
"octobrben" <[email protected]> wrote in
message
news:e6lqos$e8m$[email protected]..
>I use DW MX2004, pc platform xp windows. I have 3 rows,
inserted a
>navigation
> bar,. There is extra "spacing" between the rows above
and below my
> navigation
> bar. What is the problem??? See page :
www.sodapopscott.com/index2.htm
> ??octoberben
>

Carriage Returns in HTML Code Creating Extra Spaces Between Elements

I've looked online all over and can't find the solution to my issue. I've found several pages explaining a similar event, but no solution.
When placing many divs next to each other, I would like to visually view the code as one div per line: (see image) To get this, I have to use hard returns in my code (this method makes editing a lot easier visually). But doing so adds extra spacing between the divs which turns a 3 column set of thumbnails to 2 colums. I can fix this if I adjust the physical margins between the divs, but this can't be the only fix.
The other fix is if I place the code back to back to back (see image): This makes the div's behave and appear as they should, but now the code is a visual mess because it's all cluttered.
What I want is to be able to use as many carriage returns in my code and for browsers to disregard these types of line breaks in the code. So essentially, how can I get away from these extra spaces when using hard returns in code?

I think that both your pages have a missing </div> at the end somewhere.
Opps... that happened when I was stripping down the page to create a working example of my issue. I've fixed the missing div and re-uploaded both pages. The problem is still there.
Change display: inline; to float: left; and add margin: 0 0 4px 4px; (as shown below)
I had already tried using float, but something else in the code was forcing the columns to 2 instead of 3.
Have you used "Apply Source Formatting" ?
I use that religiously. I'm quite anal about visually clean code.
Well, I just fixed the problem while replying... funny... I removed the margins from the actual img element (.imageThumb img) and placed it on the div which surrounds the img (.imageThumb). I also reapplied the float. Thanks all for the help - it helped me rethink. But I could have sworn I had once placed the margins on .imageThumb before and it didn't work.
.imageThumb {
    width: 100px;
    height: 75px;
    display: inline;
    float: left;
    margin: 0px 10px 10px 0px;
    cursor: pointer;
.imageThumb img {
    /*margin: 0px 10px 10px 0px;*/

Spacing between characters too large when using line justification !!!!

Dear friends,
Since the first time when I have used Pages I noticed a somewhat annoying feature: Sometimes when I use line justification (left and right) the spacing between the characters increase substantially. Sometimes the spacing is ridiculously large. I guess that I have mad something wrong, but I do not know what. Can someone give me a hint what I should do to overcome this irritating aspect?!
Thanks in advance
LJ

There is no doubt that Mellel is a much better application than Pages in a lot of areas. It has been around for longer, it is more mature and it is actively maintained. Pages is of course better in a lot of other areas - and there is room for both on the market.
Mellel handles hyphenation in a much more advanced way than Pages and it has support for example for soft-hyphens, editable hyphenation dictionaries and hyphenation zones - something Pages lacks.
When it comes to the large space between characters, however, I cannot say that Mellel has invested a lot in making it look good. They just chose the simplest solution, just like MS Word, to increase space between words - not between characters. They even use this as an example of something ugly in Mellel's own user guide: "For example, the following text is fully justified but not hyphenated. The spaces between the words look wide and make the text look quite ugly."
As mentioned before, in some cases increasing space between words is the most pleasing solution to the eye. In some cases adding some space between characters is more pleasing, and that is the reason why Apple went to the extra trouble of adding that functionality. In many cases, it is not obvious which way is best, and people will have diverging opinions.

Why is there a thin dark line between two of my three cover images that wasn't there before? When I delete the images, you can tell that there is extra space between the first two image boxes.

Getting ready to purchase my first book, I looked over everything once more and noticed that there is now a thin gray line between the first two of my three cover images. I believe this may have happened when I switched out the left image. When I delete the images, you can see an extra space between the center and left image boxes. How can I fix this without starting over?

What size book? Are you previewing this way -
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
LN

Spacing words on a line in Pages

Hi Everyone,
I have a bit of problem. I was obliged to move from Word to Pages because I needed to work with Tibetan font as well as English, and since ultimately the work will probably be published in some form I need to use a Unicode font (not as yet supported by Microsoft, I believe). The only stable way to make pages of Tibetan text interleaved with English commentary and translation is (so far as I know) in Pages. So that's great.
However, when I make a line of transcription (writing in English the way the Tibetan sounds), I also write below that the exact word-for-word translation. I have to use the TAB key to line up these words on the two lines. Words, of course, are of different lengths, and with TABS the applications (Pages or Word) have their own way of systematising which causes the gaps to be hugely variable. I cannot specify an amount of space that I would like to appear between words, with the end of that space marking the next tab stop, but that is what I would like to do. Still with me? Sometimes I have to use the space bar, but since the fonts in the transcription line and the translation line are in different sizes, they don't line up well.
Is there a way round this? Please don't suggest setting the TABS. I did try that and it was horrible.
Thanks.
Ruth
iMac (Intel) Mac OS X (10.4.8)

Hi Magnus,
Of course, I should have said in my original post that I had to use an OSX application because I only work on a Mac. And it has to be a Unicode font because they are the only ones that will form glyphs properly at different sizes. XenoType at http://www.xenotypetech.com/ make the only unicode font for Macs, and Pages is the only application that I've been told of where you can run it without problems.
There has been a lot of progress in recent years enabling the writing of Tibetan in word processing programs but the greater part of that work has been on the Windows platform. However, you are right that NeoOffice may now be able to handle Tibetan but that is a very recent happening, while Microsoft Office for Mac does not support Unicode. So I can input other Tibetan fonts but some of the glyphs will be badly formed.
Actually, I can't see why you would want to use something like Furigama to store text in, not least because Pages is perfect for simply writing Tibetan. TextEdit isn't bad either but interleaving with English etc I didn't find very smooth. In fact I don't find it very smooth in Pages, and my workaround is to write the English parts mostly in MSWord and copy them across because then I can use all those short keys that make life so much easier!
You can get a free keyboard for typing in Wylie from Chris Walker at http://www.tibetanportal.com/ which is a doddle to use - you still need a font though.
I don't think I am going to get a solution to this problem in Pages. Maybe another application will do something soon - or maybe they won't. In the meantime I have to get the work done. Thanks for the interesting links, by the way.
All the best
Ruth
I have run into similar problems, but I have never
fought enough to find a good solution. Some of the
things you could try though are first to look at
http://homepage.mac.com/thgewecke/mlingos9.html#otherl
for resources about Tibetan and the Mac.
I think MS Office and NeoOffice both handle Tibetan
if you only find a keyboard for it. I can paste
Tibetan text in both anyhow.
Both MS Office and NeoOffice have support for furigana/
phonetic guides, if you activate support for
Asiatic languages. (Pages does not have this yet, but
it is my secret dream that they will get it in some
future version.)
You could consider using furigana to store text in
one of the languages. The implementation is a little
clumsy, so I recommend you to try it out thoroughly
before you type a lot of text in it. It can be tricky
to change the formatting.
PowerBook G4 Mac OS X (10.4)

Spacing between lines is not consistent!

Dear co-community members,
I am a happy Pages user since a couple of months, but I just discovered a weird thing and that is: the spacing between the lines is not consistent! I am typing my document with margins left and right: 2,25 upper and under: 2,00. I use Helvetica Neue Light in 10. And I have tried several spacings: 1,15 - 1,3 - 1,35 - 1,4 but the spaces between the lines are not consistently as big or as small as they need to be.
I discovered this when I was test printing it and I saw something was off - on paper, I thought it was my printer. But I also checked the document again: spacing was 'the same' in the whole document according to the info window. But I could see it with my bare eyes that it was not consistent (on screen nor on paper). I put the screen on 200% and I took a ruler and the spaces vary with 1mm when for example the spacing is set on 1,3. I don't think this is normal and I cannot find any solution nor explanation for it.
I am using a MBP Retina 13" late 2012 and I have the most updated/recent version of Pages/OSX. Please let me know whether I did something wrong or are my eyes just too good hahah - or it is an 'error' in Pages .
Kind Regards,
Ning.

@PeterBreis0807 & @Barry
I actually don't have any objects or other material/fonts in my text (yet) that are not uniform size . I wanted to make a print screen from a part of my text, but I am not sure if I am allowed to post that here since I am typing a literature review with references.
I btw do have headings in small capital (Helvetica Neue - Medium), it might not be Helvetica Neue Light also but I have never had problems with headings in another font causing inconsistent spacing between the rest of my text .
Thank you for your reply!
Ning.

Line spacing between buttons

Hi!
The problem what I'm having is I want to have line spacing between these buttons
but I don't know how. If I let them as below shown there isn't any space among them.
You can see that when you run the program.
SELECTION-SCREEN PUSHBUTTON /1(20) text-pb1 USER-COMMAND pb1.
SELECTION-SCREEN PUSHBUTTON /1(20) text-pb2 USER-COMMAND pb2.
SELECTION-SCREEN PUSHBUTTON /1(20) text-pb3 USER-COMMAND pb3.
Regards
sas

HI,
u can do like this.
SELECTION-SCREEN PUSHBUTTON /1(20) text-pb1 USER-COMMAND pb1.
SELECTION-SCREEN skip.
SELECTION-SCREEN PUSHBUTTON /1(20) text-pb2 USER-COMMAND pb2.
SELECTION-SCREEN skip 4.
SELECTION-SCREEN PUSHBUTTON /1(20) text-pb3 USER-COMMAND pb3.
rgds,
bharat.

No Spacing Between Lines

My new glasses have been not quite right but this problem seems to be here at the discussions only ~ for me anyway.
There is no spacing between lines, not single spacing just jammed up under each line above when it is in the same paragraph. Very difficult to read.
If it is at my end can someone advise me how to rectify it. If it is at Apple's end then please rectify it.

mira --
Glad things have settled down.
May I make a suggestion?
In the future, when it's only happening on one site,
be sure to let us know that, OK? And give us the link, as well.
Apple Discussions has been having severe problems
for the last 2-4 weeks, and we could have told you immediately
that the problem was here -- Not with your glasses (been there, done that !)
and not with your Mac but here with these forums.
Hopefully it will be squared away soon.

Pages 5: Spacing between bullets (not line spacing)

How can I control the spacing between bullets?
1. I clearly see how to control the spacing around a bullet relevant to its text. That's not what I'm referring to.
2. I clearly see how to set line spacing. That's not what I'm referring to.
What I'd like to do is keep a line spacing of 1.0 on the text, but add padding between list items (between bulleted content). The method in Pages '09 was to add buffer space "after the paragraph" (or before). However, in Pages 5.0 this option does not exist. Some of my bullets have enough content that wraps, which is why line spacing is not an acceptable solution.
How can I control spacing between bulleted list items, such that each chunk of content is better separated?
Thank you!

Silly me. I have located it, by expanding the Spacing menu. The control I'm looking for is right there.
I've included a screencap, in case anyone else misses the obvious like I have. Thanks for looking!

How to maintain original lines when converting a word file in a PDF

Unfortunately the table lines often change when converting a word file in a PDF, e.g. dotted/broken lines into straight lines or different kinds of broken lines. How can I maintain the original lines when converting the documents?
Many thanks in advance for your advice.
Li Li

Hello,
Ok, this is the background.
I’m a publisher. Any document to end user will go as pdf. And off course it preserves the word appearance. We ship our manuals only in pdf. At this point my end users have to copy the “CODES” into his editor to run the product. So when doing it, the “Codes” copied from pdf to his editor loses its format. Editor need not be the actual one; you can also test in a notepad.
P.S: You can find the difference by copying the code from word to notepad and pdf to notepad
Hope you now understood the purpose what I’m looking at for.

Extra spacing between words in a line when an icon is inserted

Similar Messages

Maybe you are looking for