Extra White Space from Hidden Menu Bar
This seems to be a problem introduced by LV 2013. I have a VI that runs with the menu bar hidden. When I hit ctrl-m to see how it looks in run mode, it looks fine. When I run the VI, instead of fully hiding the menu bar, it leaves white space. This only seems to be a problem when the VI is the top level. When the VI is opened from another VI, it looks fine. I've attached screenshots when the VI is running as a top level, ctrl-m is used and running when launched from another VI. This was not an issue in LV 2012. It's only been a problem since switching to 2013.
Solved!
Go to Solution.
Attachments:
Settings Screen Running Dev.png 86 KB
Settings Screen CTRL-m.png 84 KB
Setting Screen - Launch as SubVI.PNG 107 KB
Greetings thutch79,
I replicated the settings shown at Window Appearance Dialog.png on a new VI, ran it, and did not reproduce the problem.
I wonder if you experience the same behavior with a new VI? If not, you can copy paste the code to a new VI to fix a potential corruption issue.
Regards,
Alejandro | Academic Program Engineer | National Instruments
Attachments:
Window Appearance.JPG 119 KB
Running VI.JPG 21 KB
Similar Messages
-
Remove extra white space from an image
I want to remove the extra white space in my image while writing it into a jpeg file using JPEGImageEncoder.
Any help is welcome .ok.. Am having a JPanel whose width is set to 77000. But almost 60% of right hand side of the Panel is empty. I will create a BufferedImage from this component and then write it into a file using JPEGImageEncoder.
The empty portion of the panel is coming as a white space in the image.
Now how to remove this ? Was that clear enough ? -
How to extract ALL text on a line, including extra white space, from PDF?
I have written my first scripts to parse thru PDF files and successfully locate the beginning and ending of text portions that I wish to copy/extract. For example, one of the scripts reads thru PDF files and locates patterns that allow me to copy/extract a lengthy Title that spans several lines on the page. My remaining problem is that sometimes the text I wish to copy/extract has tabs or lots of white space between the words, and I need to retain ALL the "white space" between words. Basically, I am successful at using getPageNthWord(j, i, false) along with "Quad coordinate sets" to get a word-at-a-time for all the words on the multiple lines but it seems to be skipping over the tabs and extra white spacing beetween the words. Another way to say this is that I need to extract/copy a full line at a time, including all white space, instead of being limited to just a word at a time.
Can anyone help me with an algorithm to extract/copy text, not just the words but also including tabs and other extra white space characters? Is there some type of Regular Expression I should be using, or maybe some additional parameter used for getPageNthWord that would retain all the extra white space?
Thanks in advance,
Ted LDid you try setting the bStrip parameter of getPageNthWord to false? It will
preserve some of the whitespace, but not all of it.
As far as I know, that's the only way to do it via a script. -
Removing white space after Spry Menu Bar...
I having a bit of a problem trying to remove a little white space after my Spry Menu bar, when I set it to 8.6em theres a little white space, when I set the width to 9.7 it goes too far, I changed it to 137 pixels, however in Firefox and IE, it messes up the layout.
Also what do you do if there a different browsers, where some layouts are out of place, do you need to detect the browser with JS?The website is not live yet, everything is stored locally so heres the code: -
HTML: -
<!DOCTYPE HTML>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<link rel="stylesheet" type="text/css" href="website_style.css" />
<title>My Website</title>
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css">
</head>
<body>
<div id="wrapper">
<div id="banner"></div>
<div id="menu">
<ul id="MenuBar1" class="MenuBarHorizontal">
<li><a href="#">Home</a> </li>
<li><a href="#">Personal Profile</a></li>
<li><a href="#">Education</a> </li>
<li><a href="#">Work Experience</a></li>
<li><a href="#">Skills</a></li>
<li><a href="#">Additional Info.</a></li>
<li><a href="#">Referees</a></li>
</ul>
</div>
</div>
<script type="text/javascript">
var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgDown:"SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
</script>
</body>
</html>
CSS: -
@charset "utf-8";
/* CSS Document */
body{
background-size:auto;
background-repeat:no-repeat;
background-color:#967255;
padding: 5px;
#wrapper {
width:968px;
background: #FFF;
padding-left:0px;
padding-right:0px;
overflow:hidden;
height: auto;
border-top-left-radius:20px;
border-top-right-radius:20px;
margin:0 auto;
#wrapper #banner {
background-image:url(banner.gif);
height: 100px;
width: 968px;
margin-left: auto;
Spry Menu CSS: -
@charset "UTF-8";
/* SpryMenuBarHorizontal.css - version 0.6 - Spry Pre-Release 1.6.1 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, an auto width box with no margin or padding */
ul.MenuBarHorizontal
margin: 0;
padding: 0;
list-style-type: none;
font-size: 100%;
cursor: default;
width: auto;
font-family: abeatbyKai;
height: auto;
background-image: url(../paper.gif);
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
z-index: 1000;
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
list-style-type: none;
font-size: 100%;
position: relative;
text-align: left;
cursor: pointer;
width: 8.68em;
float: left;
height: 3em;
margin-top: 0;
margin-right: 0;
margin-bottom: 0em;
margin-left: 0;
padding-top: 0;
padding-right: 0em;
padding-bottom: 0;
padding-left: 0px;
/* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarHorizontal ul
margin: 0;
padding: 0;
list-style-type: none;
font-size: 100%;
z-index: 1020;
cursor: default;
width: 8.2em;
position: absolute;
left: -1000em;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
left: auto;
/* Menu item containers are same fixed width as parent */
ul.MenuBarHorizontal ul li
width: 8.2em;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
ul.MenuBarHorizontal ul ul
position: absolute;
margin: -5% 0 0 95%;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
left: auto;
top: 0;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul
border: 1px solid #CCC;
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarHorizontal a
display: block;
cursor: pointer;
background-color: #EEE;
color: #333;
text-decoration: none;
background-image: url(../paper.gif);
padding-top: 0.5em;
padding-right: 0.75em;
padding-bottom: 1.5em;
padding-left: 0.75em;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
background-color: #33C;
color: #FFF;
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
background-color: #33C;
color: #FFF;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenu
background-image: url(SpryMenuBarDown.gif);
background-repeat: no-repeat;
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
background-image: url(SpryMenuBarRight.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
background-image: url(SpryMenuBarDownHover.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
background-image: url(SpryMenuBarRightHover.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
position: absolute;
z-index: 1010;
filter:alpha(opacity:0.1);
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
ul.MenuBarHorizontal li.MenuBarItemIE
display: inline;
f\loat: left;
background: #FFF; -
Stripping extra white space from a string
I am trying to strip extra spaces from a string, so it there are 2 or more spaces between a word I want to remove all but one. I am trying the following code
getStringTwo().replaceAll("/\s+/is","");
but all I get is an error saying Invalid escape sequence
Thanks
G>
This strips out all the whitespace. I ended up
getting round it by walking through the string and
checking the values of each char and comparing that
to the next value. What a wast of effortt A small modification of my earlier post gives -
public class Test040320a
public static void main(String[] args)
String str = "this is a \t test";
str = str.replaceAll("\\s+"," ");
System.out.println(str);
} -
Issues in Application table - extra white space with and without scroll bar
1. There is an extra white space that comes after the last column in all the applications table, when there is no scroll lbar.
[http://files.oraclecorp.com/content/Private/Screenshots/Space_ApplicationTable.bmp]
2. If the scroll bar comes up then, there is an extra white space on top of the scroll bar.
[http://www-apps.us.oracle.com/~jkodiyan/fusion/screenshots/appstablespace1.jpg]It would be best to follow this up in your internal ApplCore / ADF frontend forum..
screenshot for issue #1: http://www-apps.us.oracle.com/~jkodiyan/fusion/screenshots/appstablespace2.jpg
That's an internal Oracle URL - Probably not a good idea to share on the internet and it's not accessible outside anyway... -
Why that I have a "extra" space in my menu bar? Help !!!
Hola
I have a extra space in the menu bar ONLY in explorer 8
In there, I have a navigation menu that I made in FWCS5
For the grace of God, I cannot figure it out why it looks like that...
I got this errors in the Browser Compatibility
Unsupported value: 'inline-table'
Affects: Firefox 1.5; Internet Explorer 6.0, 7.0; Internet Explorer for Macintosh 5.2; Netscape 8.0
Z-Index bug
Positioned containers define a new stacking order, even when the computed z-index of the container is auto. This can cause positioned children of the container to appear above other positioned elements on the page when they should not.
Here is a link to my page
http://mydsigner.com/espanol/index.html
I have post this question in the DW forum but have no get a solution or answer
I have read the information in the adobe help section but cannot find the solution to the problem
Hope someone here "Knows" about this issues because the menu was created in FW, and it is cause of the problem
Thanks a lot
Saludos
Daniel UlyssesHola Jim
Well, I have used the Spry menus, and bought other CSS menu widget, but one problem that I have with both is
that for some reason (me) when I try to update them, never works, I end up re-doing them all again, and my lack
of knowlege of CSS (getting better) was always a problem
I try to use FW, (first time ever) and believe that this may be it.
Oh well, I may have to change the menu, because it looks just weird
Thanks a lot for you honest answer
Saludos -
Why is there extra white space on below the navigation bar?
I am running Nightly 6.0a1, and for the past few days, there has been extra white space under the Navigation Toolbar, as though there is an extra empty toolbar. The only toolbar I have is the Navigation Toolbar. BTW, this happens w/ tabs on top and bottom. Here's a screenshot: [http://i1004.photobucket.com/albums/af162/cg2916/extraspace.png http://i1004.photobucket.com/albums/af162/cg2916/extraspace.png]
Do you see any toolbars listed in "Nightly > Options" that are visible but do have a check mark?
See also:
* http://kb.mozillazine.org/Corrupt_localstore.rdf
Did you try a new profile? -
My battery icon randomly disappeared a few months ago from my menu bar and i have been unable to make it come back. After researching solutions online it soon became clear that all of the suggestions needed me to go into the energy saver preferences in the setting however the icon for the energy saver preferences is no longer there and whenever i click in the blank space where it used to be, it simply says 'Could not load Energy Saver preference pane'. As a result of this i never know how much battery i have left and so i just have to wait for the machine to die each time
The mac in question is a 13 inch 2012 macbook air that is running on OS Mavericks at the moment.
Any ideas on how to get the icon back?
- I recently discovered by accident that before i actually log into my account on my mac, when i am still on the page that contains the options of guest user etc. at that point the battery icon is displayed in the top right hand corner? Why is it that the icon exists there but not once i have logged it? Thankyou for any advice.Nzdmalan the Adobe Creative Cloud application can be found in your Applications folder. Are you able to access the application itself? Is your computer managed by an I.T. department?
-
Extra white space in Firefox, not IE
Hello. I'm new to Dreamweaver and am having an issue I can't
figure out. I was hoping someone might have insight into where my
problem is.
In the following site,
http://www.firststepshr.biz,
it previews as designed in Internet Explorer. However, in Firefox,
extra white space (or blue background on the home page) is
appearing above and below the Flash header. I can't, for the life
of me, figure out why there's this difference.
Anyone have any ideas? Thanks, in advance, for the advice.
JeremyI don't see extra white space in FF2x.
If you want to use Flash for navigation, consider this -
1. Some people don't have Flash installed - what do they do?
2. Search engines may not parse Flash links - your site will
not be
spidered
3. Screen assistive devices don't parse Flash links - what
will those users
do?
4. DW cannot maintain links within a Flash movie, so if you
move or rename
a linked file, your navigation will break - what will you do?
You will have
to remake those buttons.
It's usually a very bad idea for these reasons - and for
these reasons,
Adobe has removed Flash buttons and Flash text from the next
version of
Dreamweaver.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"dwellingproductions" <[email protected]>
wrote in message
news:gckfd0$odl$[email protected]..
> Hello. I'm new to Dreamweaver and am having an issue I
can't figure out.
> I
> was hoping someone might have insight into where my
problem is.
>
> In the following site,
http://www.firststepshr.biz,
it previews as
> designed in
> Internet Explorer. However, in Firefox, extra white
space is appearing
> above
> and below the Flash header. I can't, for the life of me,
figure out why
> there's this difference.
>
> Anyone have any ideas? Thanks, in advance, for the
advice.
>
> Jeremy
> -
Extra White Space Around Header Graphic & NavBar
I have a header graphic and Navigation Bar (rollover images)
positioned inside a table. Unfortunately, there is about 1-2 pixels
of white space on the left, right, and top of the header graphic.
Same with the NavBar--there's 1-2 pixels of white space on the
edges (left & right sides). By default, cell padding for the
table is set to zero. If cell padding is set to zero, why am I
seeing white space between the edge of the graphic and the edge of
the table?
You can see what I'm referring to here:
http://newstartinvestment.com
What is causing this extra white space, and how do I get rid
of it?On 26 Mar 2007 in macromedia.dreamweaver, csbridges wrote:
> I have a header graphic and Navigation Bar (rollover
images)
> positioned inside a table. Unfortunately, there is about
1-2 pixels
> of white space on the left, right, and top of the header
graphic.
> Same with the NavBar--there's 1-2 pixels of white space
on the edges
> (left & right sides). By default, cell padding for
the table is
> set to zero. If cell padding is set to zero, why am I
seeing white
> space between the edge of the graphic and the edge of
the table?
>
> You can see what I'm referring to here:
>
http://newstartinvestment.com
(Btw, I
> don't like the yellow rollovers--they'll be removed
shortly.)
>
> What is causing this extra white space, and how do I get
rid of it?
Personally, I thought that the white border was a feature,
but... In
addition to the cellpadding, add cellspacing:
<table width="780" border="0" align="center"
cellpadding="0"
cellspacing="0" bordercolor="#000000" bgcolor="#FFFFFF">
Joe Makowiec
http://makowiec.net/
Email:
http://makowiec.net/contact.php -
Hi, I am currently building a website in Adobe Muse, and am really enjoying it. I have encountered a few differences between what I designed and what the site actually looks like and have been able to find solutions to all but one. The home page has just a header and footer and an Adobe Edge Animation. However, there is extra white space apearing underneath the animation (above the footer). Everything looks fine in the design mode, but even in preview there is extra space. I tried uploading it to our ftp, thinking that might be the issue (as the animation doesn't show in the preview mode), but the extra space is still there. I tried moving the Social media icons, thinking they might be causing it. I have looked to see if maybe there is a text box, or empty shape that is causing the discrepency, but I can't find anything. Any suggestions?
Here is the screen capture of the design mode:
Here is the screen capture of it in the browser:
Any help would be greatly appreciated.Hi Razorcs,
I have checked your file and the white space is coming from the page that you are calling in the iframe. I have seen that most browsers do not respond well, when the widht and the height of the iframe is specified in percent.
As a fix you have to give manual width and height to the iframe and that should take care of it.
For example, try something like 412px, which is the height of the edge content,
Regards,
Abhishek Maurya -
How to remove "help" from the menu bar?
I'm using a landscape monitor in vertical mode, so I have a very narrow top of the screen. I never use the help button, ever. How can I remove it from the menu bar, freeing up some space? I need more space in the menu bar for MenuMeters etc. Thanks.
MacBook Pro Retina 15" (mid-2014) 2.5 GHz Intel Core i7
OS X 10.9.5Usually the apps belonging to these icons have an option that allows you to hide the Menu Bar icon by allowing them to run as an app in the dock. However, certain applications like Caffeine must show their icons as otherwise you wouldn't be able to access them.
For example, Dropbox doesn't allow you to remove its menu bar icon: -
When is select Bookmarks from the Menu Bar, at the very bottom are a bunch of bookmarks. How can I move these in groups to a folder or folders?
The easiest way to move bookmarks around is in the Bookmarks Organizer, which at some point was renamed the Library. To open it, you can choose Bookmarks > Show All Bookmarks or press Ctrl+Shift+b.
(Please note that the sort order of the Library dialog doesn't actually carry over to the menu. To sort the menu alphabetically, it's easiest to open the Bookmarks Sidebar, right-click the words Bookmarks Menu and choose Sort by Name.) -
The problem i am having is when i go to open a file from the menu bar that as "FILE" is blackcolor
the problem i am having is when i go to open a file from the menu bar that as "FILE" is all black in color and i cant see what i'm picking how do i change that so i can see what i'm picking
Is that Photoshop? Depending on the version you could try to change the Color Theme (Edit | Preferences | General | Appearance).
If that does not help, you may have a better chance to get a useful answer if you ask in the Photoshop or Photoshop Elements forum.
Maybe you are looking for
-
I need Bluetooth on my Pavilion.
I don't have Bluetooth on my Pavilion. I was asked to upgrade. I got following message when i entered the product number. "HP has not tested this PC. For this reason, HP is unable to provide upgrade instructions or Windows 8 drivers. You may los
-
Dear security gurus, I am facing having issue with granting SCC1 and SCC4 to the functional team, they use SCC1 to import the transport within the system and with SCC4 they can change the client settings,I cannot able to separate SCC1 and SCC4 as th
-
How to display video from UDP web camera
hi Im interfacing to a Sony IPELA video camera that has a built in http web server. i can send individual HTTP commands to authenticate, to retrieve still jpeg images from the camera and to control tilt pan zoom. but when i initiate video, there is
-
Bringing column from dimension as a measure
Good morning, I have a measure in my fact table that is using 2 dimension columns for a calculation. For example: Fact table: "Expense" Dimension table: "own sq ft", "rented sq ft" (those went to dimension, because BAs thought they weren't gonna be u
-
Hi Gurus, When i make payment to vendors in FBCJ, though i give Business place and Section code in the transcation it is not picking. When i check the transcation in FBL1N or FBL3N Business place and Section code field is not captured. How do i ensur