Extra zeroes in Bex Analyzer Keyfigure columns

Hi, All
I have a problem! The Keyfigure columns contain too many zeros. For example the column displays 1600 000 instead of 1600.
This problem occurs for all queries that are executed on the machine where installed Excel 2007, for Excel 2003 this problem is not actual.
Scaling factor is not a cause of the error, so can you suggest a decision of this problem
   Product version.: 640 Final Release
   File version....: 6405.5.27.3058
   Build number....: 929757
   SAP BW ver. 3500.12.058

hi
is it a CKF or KF created in Cube ....if created in CUBE...pls chk the Properties...
HAVE U CHEKED THE DATA PROPERLY...............
It shld work yaar...
If any of this is not working,then first CHK UR PSA LEVEL...how the data is retrieved...whether as 1600 or 1600 000
try this first..

Similar Messages

How to Supress ZEROS in Bex Report

Hi Experts,
I have requirement to supress zeros in rows of AR Report in Bex Analyzer.IS it possible to Supress zeros in BEx analyzer itslef or i have to suppress in Query designer.
I checked so many forums but i am not sure whether my configuration allows me to do it or not
MY Bex Querydesigner configuration details are:
BI Addon 7.X (based on 7.10)\
Support Package 7,Patch 1
Please let me know the path to solve it.Anything is appreciable
Thanks&Regards,
narasimha.

Hi,
Jsut open your query designer and select the query in which you put the changes.
now on top there will be an icon for query properites just select that and on right hand side panel select the tab rows/column
and in that there will be an option supress zeros select active all values =0
and then effect on rows.
Hope it helps you.
Regards,
AL

How to create a new column in BEx Analyzer

Hello,
I have 12 characteristics and 7 Key figures in my Query. This includes RKF and CKF.
I'm executing the query in BEx Analyzer.
Now I want to include a new column which will be a replica of another Key figure column.
How to do this?
Regards,
Arif

Hello Arif,
You can do the setting in BEx QD and view it in Analyzer.
You can create a new formula and include the keyfigure in that formula.
This will be displayed as a new column on execution.
Regards,
Bharath

Display of Row and Column Headers in NW2004s Bex Analyzer

Hi all,
when I open a query with the NW2004s Bex Analyzer (Excel)Frontend Row and Column Headers are not visible. I need to go to "Tools-Options" and check the box for "Row and Column Headers" which seems to be unchecked by default.
Is there a possibility to make the Row and Column Headers visible by default when I open a query so that I don't have to use Tools-Options every time.
Thanks
Alex

This is fixed with SP8. The default template doesn't have this specified in SP7. It's a very easy fix. Just specify that the column headers are specified by default. Then save this new workbook as the global workbook template such that all queries use this new template. You can customize this standard template however you like!

BEx Analyzer 7.0 result column

Hi Gurus
I have a question regarding the BEx Analyzer 7.0. Hope you can help.
My customer wants to use BEx Analyzer 7.0 but is not happy with the fact that the excel query result starts in column F instead of column A (like the old BEx Analyzer did.)
Is there a way to automatically hide/disable columns A-E in the BEx Analyzer 7.0????
Many thanks for any info.
Regards!
Willem van der Hut

Hi Willem,
By Default it opens from Column F becasue Column C and Column D is used for Filter box. You can create your own workbook and can define the items where ever you want and can publish to role. End user can define their own workbook template also.
Within the BW 3.x analyzer, this is done by going to "Business Explorer -> Settings -> Permanent Workbook Template" and choosing the permanent workbook template. This will create an entry in the RSRWBTEMPLATE table for this user. Similarly, within the 2004s BEx Analyzer, the user can go to "BEx Analyzer -> Global Settings -> Select Default Workbook". This will allow them to set a permanent workbook for themselves or they can flag the global parameter to set this globally.
Please check below blog, it might help you:
[Setting the Global Workbook Template in SAP NetWeaver 2004s BI or BW 3.x|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417800)ID1050314550DB11623292632027977638End?blog=/pub/wlg/4453]
Regards,
Kams

BEx analyzer don't work move columns in report (like drill down)

Hi
 I have an issue on BEx Analyzer... When I built one report... add some characteristics and soo on... but then I need to move the order of columns... then I try to drill down.. or move to order of column... It doesn´t work,
 I did this function before.. when the poin of the mouse it's convert with other draw... like -->
 <--
 But this time it's not possible...
 Then If I press the icon that say design mode... I saw that the option of navigation is active... and when I close the design mode... the functionality of move columns work...:(
 It's difficult that each time that the user need to move columns in Bex will go to design mode... just for activate..
 I know thta we have some function on context menu.. for move columns one by other... but not for certain position..
 Could you help me please?
 I will appreciate your help and I will assign points for your answers.
Alice

Hi Alice,,
This happens some time, when i am unable to drill down by just dragging and dropping the columns. though i could not find out why. Best thing, what i do, i refresh the query and next time it works Ok.. and other th ing what you can do, right click, on the characteristics list on the left pane, go to "change drilldown", then " drill down by" there the user can select the option he is looking in for.
Hope this helps.
Shakeel.

Calculated Keyfigures Fromm Bex Analyzer into BO without Unit

Hi Guys,
We built a Universe on top of Inventory Query from Bex Query Designer. We have lot of Calculated Key figures built on Restricted Keyfigures.
In the Universe some Calculated Keyfigures are shown as folders with Unit value and some of them are not shown in folder and hence it is not bringing the Unit.
If we run the same Query from Bex Analyzer all the Calculated Keyfigures have units associated with them.
Can you please let me know if any of you have the same issue.
Thank you,
PVK

Hello PVK,
I recommend to post this query to the [Integration Kits - SAP|BusinessObjects Integration Kits; forum.
This forum is dedicated to topics related to the BusinessObjects Integration Kit for SAP.
It is monitored by qualified technicians and you will get a faster response there.
Also, all SAP Kit queries remain in one place and thus can be easily searched in one place.
Thanks a lot,
Falk

BEx Analyzer: Display values with Zero data

Hi,
I urgently need to know something about BEx QD/Analyzer:
If I drilldown e.g. Customer into the rows, it only shows me those customers for which there are values in place. However, I need to see all Customers, i.e. also the ones where the values are zero.
How can I do this in Bex Analyzer or if needed BEx QD.
Thanks
Sabine

Thanks,
but it won't be possible to create a multiprovider just for that.
Maybe I wasn't clear enough
If a have Customer A, Cust B and Cust C and I drilldown by customer in the rows, then the system only shows me Cust B and Cust C, because for a there has been e.g. no turnover in one specific month.
But in the drilldown in the report, I still want to see Cust A as well, even though the value is zero. So I should just see an empty line (instead of the key figures for Cust A).
Guys, that must be possible!! Help me
Sabine

Front-end memory and limitation cells of the BEX Analyzer

Hi BI experts,
After BW upgrade from BI 7.3 to BI 7.4 some heavy workbooks stopping to work, the error is "Client Out of Memory", the cause of this error is the memory capacity of .NET framework, this process can allocate a maximum of approximately 1.2 gigabytes (GB).
The notes 1040454 and 1411545 says that it´s possible to execute something like 750,000 cells but we made some adjusts and we could increase it until 1,800,000 cells, below some configuration we´ve made:
Query Designer:
Result Rows Always
Supress;
Display as Text or key;
Supress Zeros as Active (All Values = 0) and Effect on rows and columns.
Bex Analyzer:
Display Sort Icons Disable;
Apply formating Disable;
Allow navegation Disable;
We need some orientation how to further increase this limitation, or leaving the query lighter or increasing the memory limitation of .net framework or backing to BEX 3.5 funcionalities.
Has anyone encountered such problems in the update? Some alternative solution ?
Thanks !

Hello Caio,
The limitation lies on .Net Framework 32 bits which can handle 1.2 gigabytes.
You are reaching 1.8 Million because your datacells has no data or almost no data.
There is a KBA documenting your issue: SAP Note 1860872
There you will find a recommendation of Openhub, that allows you to extract data.
Just remember that BEx Analyzer is a tool for query navigation, not mass data extraction.
Kind Regards,
Edward John
SAP AGS

Change the layout of a query items in BEx analyzer

Hi,
I had developed a query, so when it is viewed in BEx analyzer the items(Char and Keyfigures) that i had used in rows and columns are displayed in analyzer.
Apart from this in report i can see the items i had used,
in top corner.
So i need to change the layout of these items in top corner ie. 1. all charac
2. all keyfigures
or combination of both in priority wise, is it possible.
Pl post.

Hi,
You can delete them from Query output and Save it as workBook.Then Open the workbook.You will not see them again whenever you open your workbook.
Right click on result area of output>properties>interaction tab-->enable 'Refresh Query when opening workbook' and save the work book so that whenever workbook is opened,you will get selection screen.
Pl dont forget to reward points if it helps.

Difference between Bex Analyzer and Bex WAD

Hi Every one,
I am pretty new to SAP, and working on SAP BW Front end.
I am pretty aware of Bex Analyzer and also Browser, but i always have a doubt about Bex WAD.
In my present job i talk to the users and take the requirments and create queries in the Bex analyzer which i am comfortable doing it.
I also know all the features of Analyzer and created quries and also published it on web, and also created workbooks and inserting multiple quries in the workbook etc etc..
However i have zero knowledge on WAD and how it is useful to me, and as if now i haven't got any requirment from the client for me to create any report in WAD or do some thing in WAD.
I have gone through SAP SDN help etc but i am not understanding it at all.
So can any one explain me in a laymans terms what WAD is and how it will be useful to me?
and also if possible send me link which has got PDF screen shots of what WAD is?
Points is for sure.
Regards,
Ram

Raj,
Thanks for the reply, but i still did not get the understanding about WAD. i have studied the link which you sent me.
I am still not able to understand how it is helpful for people like me,
See i create my report in Query designer, and i can execute the query in Analyser. and if i want i can execute it in the Web from my query designer, and also i can create chart on the web if i want.And i can Broadcaste it in the Web.
and also if i want i can create it in the workbook and create chart in that work book.
Then what is the point of Web Application Designer (WAD).
See i have created the Query in Designer in Development say Sales report Query on the infoprovider for SD, now what should i do with it in WAD.
How can i get it in WAD, i went to start> all Programs>Bex> WAD and i logged in to development and a sereen opend. And from here what i can do, i mean how can i open my created query in WAD?
As you guys know i am new to SAP itself, but i dont see any advantage about WAD, i read all the articals and there i found that i can create Web Items, HTML etc etc, but i already have HTML, when i execute my query from the Designer i get it in Web Browser...
See my question is simple, i have a query which i have created in the Query Designer, now how can i get it to WAD and after getting it what can i do with it??
If any one has a screen shots of there pls send me.
And Sanjeev has sent me a PDF which i saw earlear and i done the same in my WAD but i am not about to get it to work.
I have given the points to every one but still what i need i did not get yet.
Regards,
Ram

Problem of hierarchy in bex analyzer

Dear all,
I met a problem when I using Bex analyzer to run a query, there is a characteristic 0CS_PLEVEL (posting level) with a hierarchy. If the characteristic is displayed in the row or column, i can filter with the hierarchy node, everything seems to be fine. But if the 0CS_PLEVEL is set to be a free characteristic in the query, when I filter with hierarchy text node (not leaves), then there will be wrong message about 'No applicable data found', but if I add drill down according to Posting Level in rows, it indeed has data value.
And I tried filtering value with same hierarchy node with other query which is built based on Multiprovider, everything is fine.
I wonder if there is any speciall setting for filtering by hierarchy node in the query based on virtualprovider 0BCS_VC11?
Your reply will be appreciated.

Hi,
In the Exception definition,Make sure you have selected following :
In Display tab -> Select Exception affects data cells
in cell restrictions tab -> Exception affects everything
After that,once you execute the query,Exceptions should be shown on all levels.

Button GUID in BEx Analyzer 7.0

Hello Experts,
I work with the BEx Analyzer 7.0. I want to show Columns and Hidden some. I try it with the Buttons and GUID. But the options in BEx Analyzer
is badly. I cant choose a Button and say, show me this GUID. (assignment of GUID).
Someone work with the BEx Analyzer and maybe the same Problem. Someone an Idea ? If Yes, pls write me back..
Greatings from KÖLN
baris

Hi jinhyoung,
Why do you need a separate button to get the data from the variable screen and so on..?
If you insert a Analysis Item in the workbook and assign a dataprovider., in that dataprovider, assign a query which have the mandatory variables and for which you want the data to be displayed.
You'll automatically get the variable screen with buttons and all..
I hope I got ur requirement correct and hope this helps you..!
-Pradnya

Open another workbook with a button in Bex Analyzer

Hi,
is it possible to create a button in a workbook in Bex Analyzer which opens another (specific) workbook in a new window?
Or is there another easy way to open a specific workbook in Bex Analyzer.
Best regards.

Hi,
You can configure excel to open each document (e.g. workbook) in a own window, within options (display ->windows on taskbar).
You can also have 2 excel windows logged on to different BW systems (e.g. QA and PRD) bij opening not Bex but Excel for the second session and opening the BW Addin mannuelly via the Extra's -> addin menu...
How to open a specific workbook is beyond my current knowledge..
Regards, Patrick Rieken
Message was edited by:
Patrick Rieken - BI-Formance B.V.

Cell definition in Query Design within Bex Analyzer

Hello,
I would like to use special cell definition to visualizing the difference row definition between 2 columns (last year and actual year). With "Cell Definition" function in Query Design within Bex Analyzer there's a option to select a new restricted key figure for a related cell. But as a result I just can see a star (*) against a result number in that field. Do you have an idea, how can I solve this problem?
Thanks and Regards,
Nuran

Hi again Dirk,
there's not a unit problem. We use 2 different restricted key figure definition for a same row. The first restricted (or can be decribed as calculated key figure) key figure must be used in the first column to represent the value of the last year. And at the same row with usage of same text (for example: cost of goods sold)the second restricted key figure should be used to show the value of actual year (B2:costs in euro). The problem is the key figure definitions are totaly different; they're using different account groups etc. Cause of, I wanted to use cell definition function. In the first value field (B1) should be shown first key figure but I just get star (*) and a wrong value in the formula field of excel (between the toolbars and the result area).
Thanks for your reply.
Nuran

Extra zeroes in Bex Analyzer Keyfigure columns

Similar Messages

Maybe you are looking for