Extract a video from thumbdrive that was created in idvd

I copied a movie from a friends idvd to my thumb drive and I am not able to open and play it on my Macbook Pro. Is there a way to extract this video from idvd on the thumbdrive and save it in a different fomat?

Hi Dharty
Welcome to apple discussions. How did you copy it to the thumb drive? Did you save as a disc image first from the file menu in iDvd? If so, then you can use an app like Dvdxdv and bring that back into iMovie or iDvd as a QT file. Other third party apps can also do likewise. Mpegstream clip comes to mind also.
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.
Message was edited by: SDMacuser

Similar Messages

Can't email videos from iPhoto that was imported from iPhone 4

After importing videos taken with my iPhone 4 into iPhoto, I can't email them with my yahoo email account. Says it exceeds 25MB and will not allow that. I had no problems with my 3Gs emailing long videos. Any ideas?

IMHO the best solutiopn is to use Apple mail as hyour e-mail client - set it in the iPhoto preferences
LN

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
I have tried back ups and restoring, resetting, and even updating the pages app. And nothing has worked.

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
I have tried back ups and restoring, resetting, and even updating the pages app. And nothing has worked.

A Table that was created at Run time. A Row Properly Deleted from Table Is Still Present on Form with BindingNavigator

Hello
I have a dataset that was created at design time
but - after I run the app, it randomly creates a table based on The Users name
since I do not know the users name before had, the table is not part of my existing dataset
(I actually used an insert into sql nonquery to just make this table a copy of the masterUserTable)
Now - I have a binding navigator on my form, that is originally bound to masterUserTable, but my goal is to make it bound to the users table (let's say GabrielUserTable)
I thought I did so with this code:
'TODO: This line of code loads data into the 'MyLearningDBDataSet.masterUserTable' table. You can move, or remove it, as needed.
Me.MyMainDBTableAdapter.Fill(Me.MyLearningDBDataSet.masterUserTable)
Dim ThisNewVariable As String = MyUserNameIs & "UserTable"
Dim ThisNewTableName As New DataTable
Me.MyLearningDBDataSet.masterUserTable.TableName = ThisNewVariable
Me.MyMainDBTableAdapter.Fill(Me.MyLearningDBDataSet.masterUserTable)
that appeared to do the trick (but if it is incorrect please advice on the proper way to add a table made at runtime to a users existing datset)
Else where in my code I successfully execute the following NonQuery :
SqlString= "DELETE FROM " & MyUserNameIs & "UserTable" & vbCrLf &
"WHERE vState='" & txtStateInfo.Text & "';"
I check in Visual Studio 2013 that the row was deleted from the "GabrielUserTable" (Gabriel is the current value of MyUserNameIs) by using the Server Explorer and right clicking
on the table and choosing show talbe data
But the MyMainDBBindingNavigator is still showing the item I deleted.
So after searching for answers - I created a new button for testing and added the following code to test if it would work
Me.Validate()
Me.MyMainDBBindingSource.EndEdit()
Me.TableAdapterManager.UpdateAll(Me.MyLearningDBDataSet)
but the data is still shwoing after deleting it with my NonQuery
Please Help!

Hi genterprise,
>> Now - I have a binding navigator on my form, that is originally bound to masterUserTable, but my goal is to make it bound to the users table (let's say GabrielUserTable)
In my option, if you want to rebind the users table to the navigator, you need to set the BindingNavigator.BindingSource. Based on your description, it seems that you did not reset the datasoure of the MyMainDBBindingNavigator. It was the original datasource
of the masterUserTable. For more details about BindingNavigator.BindingSource Property. You could refer the link below:
# BindingNavigator.BindingSource Property
https://msdn.microsoft.com/en-us/library/system.windows.forms.bindingnavigator.bindingsource%28v=vs.110%29.aspx?f=255&MSPPError=-2147217396
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Add a note to a Calendar event that was created from Mac Mail

When I create a Calendar event by clicking on a date within a Mac Mail message (you hover over a date in an email it draws a dashed box around the date and gives an option to create a Calendar event). It creates an Event in my Calendar with the following fields: Subject, Location, Date Time and alert fields, Invitees and a link to the mail message. But - I can't seem to add a Note Field. The only work-around seems to be to manually create a new calendar entry.
Does anyone know how to modify an event created from Mac Mail to add a Note Field?
iMac Retina 5K 27-inch Late 2014, OS X Yosemite Version 10.10.3, Calendar Version 8.0 (2034.9), Mail Version 8.2 (2098).

Thanks Brett for replying, but this doesn't work if the event is created by Mac Mail - which is my issue. Sure it works with any other event but not one that has been created from within Mail. If this is a bug I'm sure the Calendar people point the blame at the Mail people and vice versa but that doesn't help me. But before I submit a report to Apple I thought I would see if I might be missing something obvious.
See the attached screenshot of an event that was created by Mac Mail. There is no Add Notes field when the event is Double Clicked, Right Clicked or any other form of click.
Graeme.

After mixing a project i select bounce and burn the disc that is burned plays on any cd player but when i try to burn the wav or mp3 file that was created the resulting disc will only play in a computer this also happens with video projects help please

after mixing a project i select bounce and burn the disc that is burned plays on any cd player but when i try to burn the wav or mp3 file that was created the resulting disc will only play in a computer this also happens with video projects help please are there any settings i need to alter as it seems the wav or mp3 file i ceated is being converted to a data file somewhere between the folder and disc drive

Same thing for a movie file.. If you want to play back the movie via a DVD and a DVD player you must create a Movie DVD and not just burn files to a data DVD... as Data DVDs are just storage devices for files and therefore will only work with computers...
Movie DVDs are special formats that include things like menus and special file formats.. so they can playback via a DVD Player...
You will need a 3rd party DVD Burning app like Toast which is what i actually use.... or the more popular DVD Creator app...to create and then burn a Movie DVD that will playback on a DVD Player....
https://answers.yahoo.com/question/index?qid=20101220205435AA70beb

Importing data from Excel to generate "filled" PDF form that was created in Designer

Hi there
I have a form that was created in Designer. The data that I need to import is all in a Excel spreadsheet with the same fields as the form.
Is it possible to import all the data so that it generates a printed PDF with the data on each line of excel?
For example:
If my excel file shows:
First Name      Last Name     Phone Number        UserID
John               Doe               416-777-9970           johndoe997
Mike               Rogers           905-887-3398          mikerogers997
In this example I would like to generate a PDF form for John and for Mike, each with their details filled out on the form based on the data in the excel sheet
Thanks in advance!

Assuming you have Adobe Acrobat 11:

OWA Calendar want to display a link to other users shared calendar that was created in Sharepoint at login

Site is using Office 365. They do not have the actual Office apps on their PC's, they access everything via OWA. (sorry if I did not use correct nomenclature).
Users currently access calendars etc, by accessing the site's SharePoint site after login to the Microsoft Portal (https://login.microsoftonline.com). Then going to "site contents", and then
accessing the calendar that was created. Just a generic calendar that they use to schedule a conference room. They log into O365 Portal, and just drill down.
What the users' WANT to be able to do, is access the calendar off of their initial OWA screen that they get when they log into the portal. At worst, just go down to "calendars" break it out, and click on "conference room calendar"
or whatever. I tried to do a copy and paste of the link from the page that has the calendar displayed, into a new link, but that did not bring up anything.
So, to recap, the site is not using AD, they are all on generic Win7 and Win8 PC's that are not in a domain.
They do not have Office on their computers. They use OWA for everything.
They do not want to drill down to calendars etc after login to access these resources, they want to be able to just click on a link on their OWA main default page they get when they initially log into the O365 portal, and get what they want. Not
drill down to the SharePoint shared calendar, which is only four clicks, but they don't want to have to do it. Whay want "ease of access".
Thanks for your help.
Rick

You can move the iTunes folder to a separate drive on your pc an then configure each account to use this drive / folder as iTunes library ... The problem is, that iTunes by default stores everything in your personal music folder which is separate for each user account in windows (and by default is on "C" drive).
I create a separate partition on every pc/laptop (and map a drive name) where I store music, videos and other mass data. This will also keep the "C" drive small, which is backed up from time to time and so my backup is also small.

How do I edit a merged clip in Audition, that was created in premiere to correct the synchronisation, and have it all updated to the premiere clip?

Hello,
How do I edit a merged clip in Audition, that was created in premiere to correct the synchronisation, and have it all updated to the premiere clip?
I have tried several tutorials but these either:
- show correction in premiere sequence (which is not practical; given the huge number of files we have)
- or show the editing in audition of a sequence, not the clip.
We have started merging audio and video (removing the original audio during merge) but some of the merged clips are out of sync, so we need to correct manually, BUT we want to correct the merged clip, which may or may not end up being used, so we do not want to take it to the sequence as all we are doing is prepare the synced files for editing.
Any idea how I can correct the synchronisation in Audition?, when I right click on clip and select "Edit in Adobe Audition" I get a list of files but not a multitrack session where I can see my video and audio tracks.

if premiere pro doesn't sync your footage properly, and you have a huge number of files, you may want to look at pluraleyes. there is a demo, and if it works properly, it would save you time to have it done right the first time, instead of tracking down random merged clips with bad sync.
premiere will either export a complete sequence or "edit clip in audition". the edit clip will create a copy of the original audio and open that in audition. there is no dynamic link, its just an audio file open in two programs at the same time. since there is no dynamic link, its not possible to bring merged clips into audition.
Adobe Premiere Pro Help | Synchronizing audio and video with Merge Clips
Once created, the merged clip cannot be re-synchronized, or adjusted. You must make a new merged clip.
Merged clip audio results in mono track audio only.Final Cut Pro XML and AAF interchange formats are not supported.
this doesn't give me much hope that audition or any other adobe program outside of premiere will help you fix the problem merged clips.

HT1338 best way to extract a video from a website?

what is the best way to extract a video from a website? THANKS!

how bout a bit more thought on this one, some people are trying to pull a video clip from their 15 seconds of fame on channel 7 news,
or perhaps a short intro video clip, on a site they own becuase it is playing as flash. since they never had hard copy of the video clip, its difficult to ask themselves for permission, if they don't know how, which is, i'm sure, why this fellow did indeed ask.
no such thing as dumb questions...just helpful ones that others may also wonder.

Need to edit a form that was created by someone else.

Hello, I have to edit a form that was created by someone else. I made numerous changes to the text and repositioned a lot of the items, and it appeared fine on my computer. However, when I open it on my PC and other systems, the fonts are substituting and I'm getting strange characters where I changed the text. I tried embedding the fonts with the Preflight embed fonts, but it is still messed up. My client is anxious...not sure what else to check. Any help would be appreciated!

You don't need to re-do the fields. If you create a new version of the PDF
file just open the old one and use the Replace Pages command to insert the
pages from the new version over the old ones. This will give you a new
version of the file, with the existing form fields still in tact. Of
course, you might need to adjust their location and/or size, but at least
you won't have to start all over again...
On Thu, Jan 22, 2015 at 11:59 PM, Laura Holancin <[email protected]>

How to include a .lvlib in a build that was created using a custom .dll

I am trying to build an executable in LV2010 that uses a .lvlib that was created using a .dll from Keyence. I have added the .lvlib to the source files as "Always Included" and I have also added all of the .vi files of the library to "Always Included." I still get the error saying "Missing External Function" when running the program. The executable seems to open fine on the development computer but not on a secondary computer. Any ideas?
Solved!
Go to Solution.

...I assumed too quickly that the problem was resolved. By specifying the path I was actually able to open the executable after installing but none of the .dll functions worked. I noticed that when I specified a path on the diagram, the .dll was no longer included in the dependencies and was no longer included in the build. I guess this would explain why none of the functions were working. I copied the .dll over to the path specified on the diagram and it still did not function.
This brings me back to the original problem I was facing. I actually removed the .lvlib. I replaced all of the library vi references with the Call Library Function and deselected the "Specify path on diagram" Boolean. When I do this, the build includes the .dll in the dependencies list and it includes the .dll file in the destination folder of the install. However, when running the executable I get a list of errors that read, "Missing external function …” I have attached an image of this error. This is the same error that occurred when I was using the library, but I thought maybe the library was the cause of the problem, which is why I used the Call Library Function instead.
*I have tried adding the .dll to the support files and I receive the same error when trying to run the executable.
*I have tried adding the .dll to the support files and making it an “always include” in the installer properties under source files. This returns the same error.
I’m really not sure where to go from here. Any help is greatly appreciated!
Attachments:
Call Library Function.jpg ‏56 KB
Error.JPG ‏23 KB

How do I keep a document that was created on another computer? I have the link.

How do I keep a document that was created on another computer. I have the link. https://adobeformscentral.com/?f=Mv9KGJZhLFi47Q-H63fajA

Hi,
The link you provided is for the HTML fillable form. Is that what you are trying to download?
FormsCentral form files are stored on the FormsCentral servers. If you are the author or a co-author of the form you can access it from any machine by logging into FormsCentral. If you aren't the author or a co-author of the form you will need to contact the author and have them share the form with your FormsCentral account. The following FAQ explains how to share forms with other users:
http://forums.adobe.com/docs/DOC-2462
Regards,
Brian

Delete table that was created via RSCRM_BAPI

Gurus,
What is the easiest way to delete a table that was created using RSCRM_BAPI. We have replace the table with an ODS and now want to remove RSCRM_BAPI's and the tables they created.

Hi,
Come across this thread when google the same.
I've found a FM to delete the extract with the data, which is RSCRMBW_EX_DELETE. You may find this useful.
Thanks,
Anfernee

Does adobe muse support flash that was created with lightroom

does adobe muse support flash that was created with lightroom

I suspect your PhoneGap app was flagged as running on both iPad and iPhone. You'll need the same from DPS. You can do this in AppBuilder at the start of the wizard where it asks what kind of devices you want to support. Note that this is only available to DPS Professional and Enterprise customers. If you are a Creative Cloud customer building a Single Edition application it will only support iPad.
Neil

Extract a video from thumbdrive that was created in idvd

Similar Messages

Maybe you are looking for