Extract abends after sometime without any errors in logs

Hi Folks,
I am implementing unidirectional simple replication for one schema (DDL & DML) without GG data pump and I am newer to GG.
Extract abends after sometime without any errors in logs. I doubt I did not configure exttrail/rmttrail properly.
What should be the commands to configure trails in this scenerio ?
Any suggestions ?
Regards
Edited by: LazyDBA11g on Aug 22, 2012 1:00 AM

Thanks Paddu for reply but I can not use DBLOGREADER as it is not compatible in my env
Use the TRANLOGOPTIONS parameter with the DBLOGREADER option in the Extract parameter file if the ASM instance is one of the following versions:
Oracle 10.2.0.5 or later 10g R2 versions
Oracle 11.2.0.2 or later 11g R2 versionsLastly I dont have connectivity issue with ASM.
Regards
Edited by: LazyDBA11g on Aug 22, 2012 1:03 AM

Similar Messages

Premiere Pro CS3 Closes after startup without any errors...

Hello,
This happened twice before and I had to re-install OS (Windows 7 Ultimate x64), because I couldn't find any topic that would help me, but this time I just want to know why is this happening and fix it once and for all!
I'm using Adobe Master Collection CS3 on my PC (ASUS P6T, Intel i7 920 , 6GB RAM, GTX 260).
I have other 2 PCs with same config and one of them had a same problem, but second one works fine.
I tried reseting preferences with Ctrl+Alt+Shift stuff - did not help, tried re-installing CS3 - same here.
Please help me solving this problem.
Thanks.

First of all, thanks for the answer.
OK, I''ll try that one, anyway I'm planing to buy CS5 very soon.
But want to know what is the cause of this "error"? Is there anyway of fixing it?

Concurrent Program ends in Error without any error message - Apps 11.0.3

Hi,
We have a concurrent program which errors out sometimes without any error message in log file or anywhere else. This happens intermittently. Is there anyway to see why this happens ( to see error message somewhere else - like FND tables ?). Any feedback is appreciated. This happens in Oracle Apps 11.0.3.
thanks
Ram

Ram,
Is this a custom or standard concurrent program?
Was this working properly before? If yes, what changes have been done recently?
Did you try to relink the concurrent program executable file and see if this helps? Also, you could enable trace/debug and submit the request again and see if more details are collected in the logs -- See (Note: 296559.1 - FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12).
Regards,
Hussein

I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.

I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.
I am running Mac OSX 10.4.11. According to the System profiler the CD/DVD drive is a "PioneerDVD-RWDVR-112D." When I compare the information under this heading, the only unusual difference from my iMac is that the G5 reads "Burn Support: Yes (Unsupported)." My iMac reads "Burn Support: Yes (Apple Shipping Drive)."
Under the System Preferences the options are set to "Ask what to do" when a blank CD or DVD is inserted. Music CD set to open iTunes, Picture CD set to open iPhoto, Video DVD set to open DVD player.
Do you have any suggestions?
Thanks, Jack

Hi Jack, great help so far!
Internal...
http://eshop.macsales.com/static_pages/Framework.cfm?page=superdrive/sdl_powerma c_g5.html
External be sure it's Firewire & not Bus powered...
http://eshop.macsales.com/shop/firewire/optical-drives/

Hello I Download Adobe Photoshop CC 2014 Last Night i INSTALLED it But it Crashes in 30-40 Sec After i Launch the Product Without Any Error Message I Need Help Can You Resolve This Problem i Tried Creative Cloud Sign Out Nd Sign iN But iT DidnT ReSolve My

Hello I Download Adobe Photoshop CC 2014 Last Night
i INSTALLED it But it Crashes in 30-40 Sec After i Launch the Product Without Any Error Message
I Need Help Can You Resolve This Problem

Lotfi are you receiving any error messages during the installation? I would recommend reviewing your installation logs for errors. Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for information on how to locate and interpret your installation log files. You are welcome to post any specific errors you discover to this discussion.

Install exit after directory choose without any error

installation of Q2 30 trial exit after I choose the directory ( I try to use either default directory or my own directory), the installation program exit without any error.
I create a file creator-2004q2-windows-en.sp or Creator-ea-windows-en.sp with is.debug=1, but still no install.log. how to deal with this.

Given the archive name, the platform is windows.
This sounds like a bad download.
-Alexis

Web service hangs without any errors and exceptions

hi all,
We have a ejb application web service that is binded with shedular bc to trigger for every 2 hours
and it runs for one and half hours making continous transactions with database..
In the web service a outer for loop will be iterated by fetching list of data from database. And this list will be iterated in the inner for loop.
This logic works fine for sometime, but suddenly after some random period of time without any errors and exceptions the outer for loop gets no list from database
and the inner for loop is never executed and the web service completes processing.
This i can able to see form my log files.
i dont understand why the list is not fetched from the database, is the problem with hibernate or it lost the connection with database,
either case it has to throw exception but the service is not.
otherwise does this is garbage collector issue.
Thanks in advance,
Bye

Without any code to see what's going on we'd be flying blind trying to answer this one.

PO Approval stuck in error without any Error message

Hi All,
we have few notifications for PO Approval where they are stuck in error without any error message. they are also not showing in the worklist of the approver nor in the wf_notifications table. please help on this on how to solve this. we have done various options to solve the issue like skip/rewind/suspend/retry. but none of them works..... below is an extract of such an notification -
Error in Workflow POAPPRV/3112-127925
From SYSADMIN
To Das, SD
Sent 12-Dec-2011 16:55:01
Closed 12-Dec-2011 17:07:30
ID 164593
Responder Das, SD
An Error occurred in the following Workflow.
Item Type = POAPPRV
Item Key = 3112-127925
User Key =429766-245
Error Name =
Error Message =
Error Stack =
Activity Id = 10770
Activity Label = ROOT:POAPPRV_TOP
Result Code = #STUCK
Notification Id =
Assigned User =
Thanks,
Sam D
Edited by: Sam D on 12 Dec, 2011 1:45 PM

Please post the details of the application release, database version and OS.
Can you find any errors in the Workflow log file?
All Purchase Orders or Requisitions Getting Stuck in Pre-Approved or In Process Status - Troubleshooting Checklist [ID 1104843.1]
Troubleshooting for Requisitions / Purchase Orders in Process or Pre-Approved Status [ID 225017.1]
Also, search MOS for (POAPPRV stuck) and go through the docs.
Thanks,
Hussein

Three or four times a day the radio module in my iphone doesn't responding. Sometimes it happened during a phone conversation, sometimes without any reason during a day.

I have a problem. I use my iphone4 during one year. I bought it with firmware 4.0.2. Three or four times a day the radio module wasn't responding. Sometimes it happened during a phone conversation, sometimes without any reason during a day. Just I was out of connection for incoming calls. But it happened without any warnings on my iphone. After I have upgraded firmware to 4.1, this problem disappeared (baseband 2.10.04). But a week ago I upgraded firmware to 4.3.3 and my problem appeared again (4.10.01). I changed SIM-card, but it didn't help. How can solve this problem? I want to downgrade baseband to 2.10.04. Are there another solutions?

Hi ZachBrunelle!
I'm saddened that your having trouble with your device and you efforts are greatly appreciated, let's get to the bottom of this! You mentioned your device not having any physical damage, has it been exposed to anytime of water/moisture?

AR Autoivoice fails without any error

Autoivoice fails without any error, the lines remains in the Interface Lines. I do not get any exception or error, but the invoice is not created. After running Autoinvoce, Sales Order status is closed, so the problem is with the Autoinvoice..
Any ideas of solving this problem? Thank you..

It is completed, there is nothing in the log file but this Warning: some records remaining in ra_interface_lines..it looks as if it had completed normally, but the invoices are not created..there is no error shown..
Could it be the problem the Accounting and Invoicing rules that are set to Monthly?
Thank you.

Propagation Queue hanged without any error.

Hi All,
We have bi-directional replication using streams on 10g database.Last night propagation process hanged without any error in any of the queue.
We tried to restart it but propagation queue didnt stop.It just went into infinite loop.
Finally we have to kill the session.Then we restarted the database and everything worked fine.
Just curious what happened there is no error so far neither in the queue nor in alert log/trace files.
Please help!!!
Thanks for all your help!!!
Kind Regards
Rahul

There is insufficient information here to help you.
If you have not patched to 10.2.0.4 that might be something to put on your radar sooner rather than later.

Nokia Store Quits without any error messages.What ...

My inbuilt Nokia store application within my Nokia Asha 305 keeps quiting without any error messages.What do i do to resolve this.I recently updated the S40 OS could that be the reason. And why?

Just reset it to factory. That worked for me

OBIEE 11.1.1.6 installation hangs without any error or warning

Hi all,
I'm trying to install OBIEE 11.1.1.6 on a previous 11.1.1.5 installation, on Windows Server 2003 Enterprise Edition. I followed the instructions on the "Oracle® Fusion Middleware Upgrade Guide for Oracle Business Intelligence 11g Release 1 (11.1.1)" manual, "Moving from 11.1.1.3 or 11.1.1.5 to 11.1.1.6" paragraph.
All checks give positive result but then installation hangs without any error or warning. I tried 3 times with the same behaviour.
Any suggestion? Anyone having similar problems?
Thanks in advance,
Cristina

The only error I get (in the Windows application event viewer) is:
[nQSError: 12002] Socket communication error at call=recv: (Number=10054) An existing connection was forcibly closed by the remote host
Any suggestion?
Thanks,
Cristina

Imac shuts down without any error message

imac shuts down without any error message

Need more details. Which iMac? Which OS? When does it shut down, under what circumstances? What are you doing when it happens? Is it reproducible, i.e. can you make it happen? Does it appear to be getting very hot before it shuts down?
Open Console in Applications>Utilities and navigate to system.log. Do you see any messages related to shutdown from the time when this has happened? Enter "shutdown" in the filter field, upper right corner.

Weird error without any error message

I've been working on some actionscript 3 system. And all of a
sudden, it wouldn't execute anymore. When I pushed CTRL-Enter in
Flash CS3, a white screen would open up (instead of the normal
flash program) and no trace-output would be given.
Three hours later I found the cause of this weird problem.
It's (simplified) the line:
var value:Number = -(true ? 1 : 0); // This one doesn't work.
Put this line in your script, and your entire program won't
execute. And without any error message! I was wondering, why is
that? By the way, the following lines do work:
var a:Number = -(2*3+4); // Gives -10.
var b:Number = (true ? 1 : 0); // Gives 1.
var c:Number = -b; // Gives -1.
var d:Number = 0-(true ? 1 : 0); // Gives -1.
var e:Number = -((true ? 1 : -1) as Number);
So, my guess is that the code (true ? 1 : 0) gives some sort
of data type which is not a Number, and therefore doesn't except
minus signs. But that wouldn't explain why it doesn't even give an
error. So what IS wrong with it?

ok - well if these numbers are used to begin the execution of
a method in your file, it's likely that they are not firing up
because the syntax here is incorrect. in order to use this type of
conditional operator (which i do use quite often as well, handy
convenient ;) the structure should be:
var value:Number = (condition) ? 1 : 0;
'true' is not a 'condition' but a boolean result, so it
should not be evaluated in the way have been using it here -
however 'true' is 'true' so the result will always be 1 (the first
expression in the operator) - i'm not certain why you would need a
-0 result and if you are always wanting a 'negative' number then
use that number in the return expression, as in:
var value:Number = (condition) ? -1 : 0;

Extract abends after sometime without any errors in logs

Similar Messages

Maybe you are looking for