Extract checker
Hi All:
I've a typical problem with standard extractors for purchasing. I filled setup tables for purchasing and checked the log for this job, 2,822 records are selected from EKKO. But when I check in RSA3 it brings 0 records. Also the cluster tables MC02*SETUP (MC02M_0HDRSETUP) has 0 records. I dont understand why, please help me.
Thanks,
Manasa.
I remember that i had the same problem.....Try to do the extraction from BW...i believe that the RSA3 is not prepared for test extraction from Datasources that have Setup Tables....the same case in 2LIS_03_BF...you can made the initialization and in the RSA· is bringing 0 records but in BW you can see the data from setup tables....
Check that
Regards
Similar Messages
-
Hello Experts,
When I Execute datasource 0CFM_DELTA_POSITIONS in Delta mode, Iam getting the below error message.
Error msg: "Could not determine BW release of logical system"
Please help.
Points will be given.
Regards,
KVHi
find out if there is any issue with the RFC,
1. Go to the Source Systems under the Modeling tabe sellect your
SourceSystem and contextmenu (right click) and go with check.
2. Find if ther is any issue with the Extract checker go to T.coad RSA3
In the Execution Mode there is an option for Debug Mode.
Check the Debug Mode and go with Extraction tabe to Debug it
For Ex:
PROGRAM GP3TXQHZUZTOIJYM6H3QINXVNGD.
Generated subroutines for data transfer
Template.............: RSAPTD1
Generation program...: %_T01040
Generation date......: 31.12.2008
Generation time......: 10:22:58
Generation release...: 700
Generated by.........: SAPUSER
INCLUDE lrsapd00.
INCLUDE rsaucmac.
TYPE-POOLS: rsap, rsaot, rsfh, rsudt, srsc.
info source..........: 1_CO_PA_HULG
info source structure: ZOXID30233
transfer structure...: ZOXID30233
TYPES:
ty_t_cpinfos LIKE rsurcpinfo OCCURS 0,
lty_s_ext LIKE ZOXID30233,
lty_t_ext TYPE STANDARD TABLE OF lty_s_ext WITH DEFAULT KEY,
lty_s_tfe LIKE ZOXID30233,
lty_t_tfe TYPE STANDARD TABLE OF lty_s_tfe WITH DEFAULT KEY.
CONSTANTS:
g_c_mbc_languages(1) TYPE c VALUE
' '. "#EC NOTEXT
DATA
g_funcname LIKE tfdir-funcname VALUE 'RKE_BIW_GET_DATA_API'.
FORM DATA_TRANSFER *
--> P_T_SELECT *
--> P_T_FIELDS *
--> VALUE(P_S_REQUEST) *
--> VALUE(P_S_IDOC_PARAMETERS) *
--> P_SUBRC *
FORM data_transfer
TABLES p_t_select TYPE sbiwa_t_select
p_t_select_pass TYPE sbiwa_t_select
p_t_fields TYPE sbiwa_t_fields
p_t_fields_pass TYPE sbiwa_t_fields
USING value(p_s_request) TYPE rsap_s_request
value(p_s_idoc_parameters) TYPE sbiwi_s_parameters
CHANGING p_subrc TYPE sbiwm_subrc.
dynamically called by LRSAPU06, RSFHGEN2
DATA: l_datapakid TYPE rsap_s_task-datapakid,
l_subrc TYPE sbiwm_subrc.
IDOC tables/structures
DATA: l_s_ZOXID30233 LIKE ZOXID30233,
l_t_ZOXID30233
LIKE ZOXID30233 OCCURS 0.
extractor
DATA: l_fname LIKE rois-fname.
l_fname = 'RKE_BIW_GET_DATA_API'.
interface parameter: distinguish test from BW calls
DATA: l_read_only TYPE sbiwa_flag.
in case of delta request, call common delta extractor
CASE p_s_request-updmode.
WHEN sbiwa_c_updmode_delta.
l_fname = rsaot_c_extractor-gendelta.
WHEN sbiwa_c_updmode_repeat.
l_fname = rsaot_c_extractor-gendelta.
WHEN sbiwa_c_updmode_deltainit
OR srsc_c_updmode_initsimu.
l_fname = rsaot_c_extractor-gendeltainit.
ENDCASE.
Set SUBRC to 0 as default
p_subrc = 0.
PERFORM get_bwbcrl_testmode IN PROGRAM saplrsap
USING srsc_bwbcrl_20a.
IMPORT l_read_only FROM MEMORY ID 'RSFH_REO'.
IF p_s_request-immediate = rsfh_c_debug_on.
BREAK-POINT.
ENDIF.
Deadlocks bei paralleler Extraktion 30B SP07, Hw. 569760
IF p_s_request-updmode = sbiwa_c_updmode_full.
COMMIT WORK.
ENDIF.
Initialization of application API
CALL FUNCTION l_fname
EXPORTING
i_requnr = p_s_request-requnr
i_isource = '1_CO_PA_HULG'
i_maxsize = p_s_idoc_parameters-maximum_size
i_initflag = sbiwa_c_flag_on
i_updmode = p_s_request-updmode
i_rlogsys = p_s_request-rcvprn
i_read_only = l_read_only
TABLES
i_t_select = p_t_select_pass
i_t_fields = p_t -
hi all,
my senerio is, i want to extract the data from R/3 Data sources in to flat files through Extarct checker.
when i am doing the same by giving
data source 0CO_OM_OPA_5
data records/ call 15000
No of ext calls 10
it is showing the total records as 150000, but when Iam incresing the data records/call and No of ext calls the toal is increasing.
can any one tell me how can i check the total no of records in that paricular data source other than extract cheker method.
Thanks in advance
upendranathHi Upendranath,
I guess there is no limit.
You can also check this blog for more info on RSA3:
/people/sajeed.ms/blog/2006/02/12/extract-checker
Bye
Dinesh -
EXTRACT CHECKER (RSA3) DISPLAY
Hi gurus-
When I use rsa3 to check the extraction and display the records, the column headings are the descriptions. How can I changes these to technical names of the fields. I have few custom fileds and some of those have same name as the previous fields hence I can not distinguish them.
When I try the display of single record, even in there it shows descriptions.
ThanksHi
- When you see the list of records in RSA3, Click on "Current Layout" Button in toolbar (or press CTRL + F8)
- On the left side of pop up window, you will get columns displayed with their position and lenth.
- Here Increase the length for the Fields for which you want to see technical names.
May be you can put length as 20 or 25 for those fields
-Click Copy and you will be able to see technical names in bracket.
Cheers
Prasad -
Hi,
I am running delta load and repair full request into BW with one hour gap.
I have "X" number of reocrds in setup tables and "Y" number of records in Delta Queu(RSA7), now if i want to check the records then i will execute RSA3, Now can you tell me which records it will show wheather setup tables data for RSA7 data.
Cheers,
MalliLook at the below options in Updat Mode:
F Transfer of all requested data
D Transfer of the Delta Since the Last Request
I Transfer of an opening balance for non-cumulative values
R Repetition of the transfer of a data packet
C Initialization of the delta transfer
S Simulation of Initialzation of Delta Transfer
Regards,
ARK -
Short dump in extract checker (RSA3)
Hi,
While extracting the structure 2LIS_11_VAITM in RSA3, it's going to dump and giving the message in dump is 'The data type is "N" in the dataset, but "C" in the program. '.
The back ground is First I enhanced this structure with one Z field of data type NUMC18 and later changed this data type to CHAR18 and activated. Also replicated in BW side and it is CHAR18 in BW. But in RSA3 it's giving dump.
Please let me know regarding this.
Thanks in advance.Hi Shashank,
Thanks for your reply. The source field is also CHAR18. Actually the source field is changed fron NUMC18 to CHAR18 in R/3. That's the reason why I changed it to CHAR18 in the structure and activated. I think some where it's not getting updated to 'C' from 'N. Any idea I am missing something somewhere?
Thanks... -
Hi,
I created a generic DataSource using a function module and i'm testing it using RSA3. I'm trying to extract the records by specifying a range of values for a field in the DataSource , but RSA3 extracts all the records without considering the specified values.
Can anyone please let me what could be the problem and how to extract only the specified range of values in RSA3
Thanks,
AMHello,
In your function module did you specify the ranges and use it on the your initial SELECT statement?
An example (code available at RSAX_BIW_GET_DATA_SIMPLE)
Ranges:
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CARRID'.
MOVE-CORRESPONDING L_S_SELECT TO L_R_CARRID.
APPEND L_R_CARRID.
ENDLOOP.
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CONNID'.
MOVE-CORRESPONDING L_S_SELECT TO L_R_CONNID.
APPEND L_R_CONNID.
ENDLOOP.
Select with ranges:
OPEN CURSOR WITH HOLD S_CURSOR FOR
SELECT (S_S_IF-T_FIELDS) FROM SFLIGHT
WHERE CARRID IN L_R_CARRID AND
CONNID IN L_R_CONNID.
Try also to put a break-point in your function module, at SELECT statement line, to see how your function is making the DB call.
Hope that this may help you.
Regards. -
RSA3 -(Extract Checker ) Target Sys field -Urgent
Hi
Can any one explain what is the use of this field?
I am running a data source in BW using RSA3 , if I use target system name then it gives X number rows and when target system field is empty it gives Y another number of rows. In my cube there is no field called target system? How does the system determines this field.
Please let me know your thoughts. This is quite urgent.
Thanks
VennelaHi Diego,
Thank you for your reply but I am not able to understand your reply.I am using full load so delta option is not relevant.
my question how does the system determines number of records different when I give target system name .
I dont have field called target system in my cube.
It is effecting me because on the target system we are expecting x number of records but it is sending less.
Please expalin. -
Extractor Checker OK but actual Extract has no data!
Hi all,
Thanks for taking the time to read my post and for your help in advance
I have a simple custom function module in ECC6.0 which is getting employee information from LDAP. This information is then tagged on to a few other fields and sent to BW.
I created a data source based on this function module and I'm trying to send the data to BW. The Extractor checker is working fine and shows the right data. However, when I run the infopackage from BW I receive no data!
I checked the IDOCs as well and noticed that the info IDOCs are sent back to BW with 0 data records, which is telling me that the extractor is not sending back any data, despite it showing the data in the extract checker (RSA3)
Any thoughts?
Thanks,
MamdouhThanks everyone,
The partner profile is ok, and when I test in RSA3 I see the data the I need - so running the extract in debug mode is fine, however running it in the background mode gives me 0 data records
I don't think it is an authorization error either !
Any thoughts?
Thanks again -
Extraction Problem- while filling the setup table
Hi all,
I have a problem when i fill the setup table for LO cockpit Extraction on any SD datasources (2_LIS_VAHDR,2lis_13_vdkon etc.,). i am done with LBWQ successfully. i also verified the datasources in RSA6. They are in active status in RSA7-delta queue.
After i submit the request to fill the setup table, i am getting
"datasource 2_LIS_VAHDR contains data still to be transferred". if i check the extract checker (RSA3) i am getting the error msg "data source is not defined in the source system"
Can anybody help me on this?
one of my friend suggested that it could be the reason that some jobs are in active status that loads/updates data into base tables which the datasources refers.
Any idea on the reason and resolutions?
Greatly appreciated !Hi Vijaya,
We too got the same Error : " the datasources are not defined in the source system".
This is source system connection problem. Check whether connection between R/3 and BW is active.
This error occurs when the connection is inactive.
Also, if it is copy client, then check data exists in other client. If so delete the setup tables data in that client as well.
This will resolve your issue.
Thanks
Edited by: Allen Fyne on Aug 9, 2008 6:47 PM -
Error occurred during extraction in r/3 ( loans data sources)
Hi,
for Data source 0CML_Delta
Iam getting 0 records when i check the extraction checker in RSA3. i have used Delta Update mode.
Even in BI it shows 0 records for delta load.
i have done the change pointer activation and even updated the dynamic infosource as suggested in SDN threads.
but still shows 0 records.
For full load iam getting 'Error During Extraction'.
Is there any specfic procedure to follow for this?
Can any one suggest me the correct procedure?
regardsHi
Try Extracting data in debugging mode and check whether there is nay data getting filled in the tables. If not then probably check out the logic written once again,it is also possible that there may be no new data.
Regards
Raj -
Financial Statement hierarchy not extracted correctly from ECC into BW.
Recently, one of my clients modified a FS hierarchy in production environment by moving some nodes from revenue to expenses, but BW is not picking up the change.
In ECC via transaction FSE3, one of our Financial Statement hierarchies shows three nodes - (Group Life_, Vehicle Plan only_, and Cost of Removal_) as Expenses. However, the BW extractor still shows these three nodes as Revenue and loads the hierarchy into BW that way as well.
DataSource is 0GL_ACCOUNT_T011_HIER with field HIENM = AE03. When running RSA3 Extractor Checker in ECC, the displayed data still shows the three nodes in question as Revenue and not correctly as Expenses.
Found SAP note 1061847 - Ind. For reversing plus/minus signs not extracted correctly. Applied note in ECC development environment, tested the extractor, and checked the load into BW, but the error regarding the nodes still exists after applying the fix.
Appreciate any suggestions or thoughts from the community.
Thanks!
SAP landscape is as follows:
SAP_BW 700 0009 SAPKW70009 SAP NetWeaver BI 7.0
SAP_AP 700 0007 SAPKNA7007 SAP Application Platform
SAP_BASIS 700 SAPKB70010 SAP Basis ComponentThanks SDNBI. I reviewed the suggested OSS note 1037447, but I am not sure how it applies in my situation. The suggested note seems to address a problem with the display of transfer structure in BW. Our problem seems to be that the extractor on ECC is incorrectly extracting the hierarchy structure. When viewing the data in RSA3 extract checker in ECC, I see the three nodes in question incorrectly positioned in the hierarchy. Thus loaded the same incorrect way into BW. Yet, when I display the hierarchy through transaction FSE2, the three nodes are displayed correctly.
-
Hi team
i am trying to simulate check process.
i processed payment in F110. and clicked printout tab and gave print.
however nothing came out from printer.
not sure if it got printed. when i go to FCHX to extract check, it says no matching data.
i need to check how to see if a check was printed. ther shoudl be soemthing rt? we cannot go on reprinting already printed check......coudln't find though, so seeking help. tcode and / or table name would be helpful.
regards
KavanaHi,
Go to transaction FCH2 and check whether the check present for the F110 payment document.
If not, then it means no check created for F110 payment. Then you need to check:-
(1) Whether a suitable Check printing program is assigned to the payment method in FBZP
(2) The variant setting in the printout tab of the F110.
(3) Whether the printer setting is correct to trigger the check from F110 to your printer. You can take the help of BASIS team for it.
Regards,
Gaurav -
Single check (single check number) for mulitple page
While printing check, I have 100line items for same vendor. going to give single check . while printing with standard program and layout,it is printing 3pages and printing 3checks in each page.it is creating first 2 voided check and 3rd one is original.but issue is, it is creating 3 checks in different numbers.if it is 100001,100002,100003 three check, 100001,100002 is voided and 100003 is original check. but for my requirement all the page should have same check number and 2pages voided and 3rd page is original check.100001(voided),100001(voided),100001(original)like this has to print.can any1 help on this ?
Hi Lak,
Option 1: You can do this if you have centralized payment system. That's one company paying for the multiple company codes.
You can then do following customizing:
1) In fbzp " All company codes" make sure paying company code is same for different sending company codes
2) Do cross-company customizing "OBYA"
Option2: If you don't have a centralized payment system, there could be possibilty to address you need, by adjusting the SAP script form for check. From good accounting practice point of view it might now be advisable. Moreover, if you are running check extract for Bank (Positive pay file) keep in mind SAP extracts check info per company code (Standard), so you will need some development. And you loose some reporting functions for check too. Moreover, I am not sure how will you handle the check reversal. It might involve multiple steps, since you can use the standard FCH8.
Unfortunately the payment grouping key ZGRUP is defined at the company code level
Thanks
Ron -
COPA datasource error - Errors occurred during the extraction
Hi,
I have an issue with the COPA datasource,
1. I have created a COPA datasource in DEV and its working fine in DEV. the entire extraction is working fine.
2. Then I transported this copa datasource to QA where I am getting belor error.
In Extract checker, when checking for the data, i am getting the error
"Errors occurred during the extraction"
Application Log:
@5C\QError@ Syntax error in generated program @35\QLong text exists@
Syntax error in generated program
Message no. RD117
Diagnosis
A syntax error has occurred in the generated program for the CO-PA extractor:
MSGV1: "RSFHGEN2"
MSGV2: "No component exists with the name "HILFS". ."
MSGV3: " 18"
MSGV4: ""
Regards,
VijayHi,
Thanks for your answer, I have gone through this note and i know that there are inconsistencies b/w the extract structure and operating concern.
But I would like to know is,
1. why its working in DEV?
2. How to fix this error in QA?
3. Do I need to recreate the datasource and Operating concern with/without the fields which are giving the problem.
Regards,
Vijay
Maybe you are looking for
-
Home Sharing on Windows problem
I'm using iTunes for Windows version 10.6.1 on 2 different PCs, I enabled Home Sharing both from the Advanced option panel and from the Preference>Sharing Panel with the same Apple ID and one PC (the laptop) can see the desktop sharing but not vice v
-
Setting directory dynamically in File adapter in BPM 11g
Hi, I am using file adapter in BPM 11g for writing perpose. While configuring, it is required to provide the directory location, which can be either physical path or logical. The location where the new file will be stored/saved is written in a text f
-
I am trying to print wirelessly from my ipad to an epson stylus SX438W. The connection appears fine on both devices but the ipad cannot connect to the printer. It has been working fine for the past 4 months. Can anyone help?
-
Can't download anything, and my payment keeps being declined what do I do?
what it says above and I've been trying for hours.
-
Safari 3.1 bug on Gmail
Just upgraded my old version safari to 3.1, but today I found a bug when using Gmail. I was trying to compose an email by using web based Gmail, when I put the cursor into composing area, it will jump to address field once when I press the SHIFT key.