Extract data from datasource 0APO_MSP_CHECK_ORDER error

Hi,expert. Happy new year. I met a problem today,when I use TCODE RSA3 to extract data of datasource ,0APO_MSP_CHECK_ORDER,I got an error.
1. Follow-up error
Follow-up error
Message no. /SAPAPO/OM_ERROR184
2. om_other_failed
( om_other_failed )
Message no. /SAPAPO/OM012
So, I can't extract data from this datasource.
The datasource 0APO_MSP_SLOT had the same error too.
PLZ help me. Thank you very much.
Happy new year.

It has been solved.

Similar Messages

Trying to extract data from Datasource, getting an S:RSSDK:300 error

"While pre-viewing data using UDC DataSource - we get ""S:RSSDK:300 Query execution failed: ERROR: Relation 'ZV1' doe s not exist Message no. RSSDK300"" error "
Any help would be greatly appreciated

Hi Raj,
The issue we were facing was an Netezza issue. When import table into the Netezza Data Warehouse we import table into the wrong structure. We simple moved the table over to the right structure within the Netezza Data Warehouse and we were able to preview data from Datasource.

FM to extract data from Datasource

Hi,
Can any one of you suggest me an idea or let me know where to start and how to start ?
I want to write a ABAP code/ create a Function Modules which extracts data from a DATASOURCE be it any on condition(say date) and the output given should be filtered on some fields
Does a standard datasource be extracted using a custom FM?
Are there any standard FM to do this?

Hi,
go to the TX- SE80 and create the function group.
after take the FM - RSAX_BIW_GET_DATA_SIMPLE
please look at the below doc it will help.
Generic Extraction based on Function Module
Thanks,
Phani.

Error while extracting data from datasource 0GLACCEXT_T011_HIER in RSA3

Hi Experts,
While trying to extract the data for the datasource 0GLACCEXT_T011_HIER in RSA3, am getting the below Dump.
Runtime Errors         SAPSQL_ARRAY_INSERT_DUPREC
Except.                CX_SY_OPEN_SQL_DB
Short text
    The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLFAGL_FSV" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
     in
    procedure "FSV_TEXTS_CONVERT" "(FORM)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    If you use an ABAP/4 Open SQL array insert to insert a record in
    the database and that record already exists with the same key,
    this results in a termination.
    (With an ABAP/4 Open SQL single record insert in the same error
    situation, processing does not terminate, but SY-SUBRC is set to 4.)
Kindly help me out in resolving this error.

Hi,
This dump occurs if the storage of original files is not happening in a Content Server, which is recommended by SAP. You can check this easily if you go to transaction DC10 and check if the flag 'Use KPRO' is set for the used document type.
SAP do not recommend storing such larger files in SAP DB. If you try to store any original in the SAP DB, the file will be stored in the table DRAO. That means you are consuming table space memory. For one original we can have maximum of 9999 rows in the table. To store larger originals in SAP DB more than 9999 rows in the table are needed and this is not possible. That's the reason behind this dump. Storing such huge files inthe SAP DB will also affect the performance of the system while accessing the original
Refer the thread
"http://wiki.sdn.sap.com/wiki/display/PLM/SAPSQL_ARRAY_INSERT_DUPRECwhilesaving+original"
Thanks,

Runtime error while extracting data from 0C0_PC_*

Hi,
When I am trying to extract data from DataSources 0CO_PC_01 and 0CO_PC_02, I am getting an
error. it says "DO_WHILE_VARY_NOT_IN_RANGE"
Any Comments?
Thanks,
Pritam

Hi,
Please searcn SDN, you will get the solutions straight away:
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=do_while_vary_not_in_range&cat=sdn_all
It seems that there is a note for this, Please check SAP Note: 650725
Hope this solves your concern...
Cheers,
Habeeb

Unable to extract data from 0HR_PA_PD_2 datasource

Hi,
I am extracting the data from 0HR_PA_PD_2 (Appraisals) datasource to the cube 0PAPD_C02 (Appraisals).Though the data available in R/3 (83 records,checked in RSA3) it is giving the message "No data available in the source system".I checked the RFC connection,IDOCs,SM58 for any message.But everything is fine.In the status tab ,it is showing "Info IDoc received with status 8".But the data is available in R/3.
Please help me if any one faced this type of issue or is there any other steps has to be followed.
Thanks & Regards,
Dinakar.

Hi Dinakar,
Check Roberto's reply in this thread... It might help you...
Re: Problem in InfoPackage for Billing Document Item Data(2LIS_13_VDITM)
Also check these related threads...
Info IDoc received with status 8. - extracting data from R/3 -co-pa
Info IDoc received with status 8. - extracting data from R/3
error while doing init load ..Idoc received with status 8
Info Idoc received with status 8
Regards,
KK.

Error while extracting data from Generic datasource

Hello Gurus,
I have encountered an error "Errors in source system" with status red while extracting data from generic datasource into DSO.
I have done below things:-
1. Checked the jobs in source system, the job is successfully completed
2. The generic datasource is active and supporting delta with calender day in source system.
3. No TRfc error and no idocs stucked.
4. No short dumps in source system.
5. The delta queue(RSA7) is showing 0 with status as green.
6. Replicated the datasource On BW side and also activated the transfer rules by RS_TRANSU_ACTIVATE_ALL
The problem has not yet solved. Could you guys please suggest me what might be the reason for this error......
Thanks,
Sonu

Hello,
I have used the generic delta using calender day.
Safety upper limit : - 1
Safety lowerr limit : - 0
I have made the entries in va01 transaction, but the delta queus is not getting updated which should show 1.
Do Generic extraction require any job to transfer data from Database table to delta queue.
We are not able to get the delta records on BW side. Please suggest.
Please suggest.
Thanks,
Sonu

Error while extracting data from Generic VBAK Table

Hi,
When i am extracting data from VBAK using generic extraction via tavle, i am, getting the error "Syntax error in program "SAPLXRSA ""
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLRSAP" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "SAPLXRSA " in include "ZXRSAU01
     " in
    line 159:
    "The type of the database table and work area (or internal table) "L_ST"
    "R_CE1IDEA" are not Unicode convertible. ."
Please help me out in fixing this,
Thansk,

do you have an user-exit? if yes, post the code....
did you try regenerating the entire stuff (ds, structure,...)...there might be a mismatch between the structures of datasource and the generated extraction program....
M.

Error while loading data from DataSource to InfoCube/DSO through DTP

Hi Friends,
I am trying to load data from DataSource to InfoCube/DSO through DTP and getting the following error:
Exception in substep: Extraction completed
Processing terminated
Data package 1 / 30.04.2009 22:38:30 / Status 'Processed with Errors'
When i see the detail message it says:
Syntax error in routine "convert_to_applstru", line 25 of generated program"
I checked all my transformation and looks ok. I was able to load data earlier and i getting this error all of sudden. Does some one know what is this routine "convert_to_applstru" ?
Thanks,
Amit

Hi Arun,
Where do i see this generated program in RSRV. I dont see this in RSRV. Please guide me.
Thanks,
Amit

Error while extracting data from CRM

Dear all,
I have used some standard and generic datasources to extract data from CRM. These were working fine for more than a year and are scheduled in Process chains. For the past few days I am getting Caller 09 error as shown below, only for the generic datasources. I have checked the connection,replicated the datasources and activated them, reinitialized and have tried all the solutions that were posted earlier, but still the process chain fails. When I execute the process chain for generic datasources manually, it is working fine.
When I tried in RSA3 for both standard and generic datasources in CRM with update mode D, I get a message 'Error occured during the extraction',
Kindly suggest what can be the problem.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Thanks all in advance.
Regards
Adhira Anand

Hi Meyappan,
I have checked SM37, SM21 and ST22. There are no errors.
in SM37 the below log is displayed.
Job started
Step 001 started (program SBIE0001, variant &0000000005420, user ID ALEREMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = ZCRM_SRV_DEFECT
RLOGSYS    = CLNT645BIP
REQUNR     = REQU_4JHQ8HH6KA40JHC1TYLYIV2W2
UPDMODE    = D
LANGUAGES = *
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 2000000000                              *
abap/heap_area_total.......... 2000000000                              *
abap/heaplimit................ 40000000                                *
zcsa/installed_languages...... DE                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 6500000                                 *
ztta/roll_extension........... 2000000000                              *
1 LUWs confirmed and 1 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
IDOC: Info IDoc 2, IDoc No. 101415, Duration 00:00:00
IDoc: Start = 13.10.2010 22:51:39, End = 13.10.2010 22:51:39
Synchronized transmission of info IDoc 3 (0 parallel tasks)
IDOC: Info IDoc 3, IDoc No. 101416, Duration 00:00:00
IDoc: Start = 13.10.2010 22:51:42, End = 13.10.2010 22:51:42
Job finished

Error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7

Hi Gurs,
I'm getting the below error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7. (Actullly this is IS Retail datasource used to push POSDM data into BI cubes)
The error is:
Update mode "Full Upload" is not supported by the extraction API
Message no. R3011
Diagnosis
The application program for the extraction of the data was called using update mode "Full Upload". However, this is not supported by the InfoSource.
System Response
The data extraction is terminated.
Procedure
Check for relevant OSS Notes, or send a problem message of your own.
Your help in this regd. would be highly appreciated.
Thanks,
David.

Hi David,
I have no experience with IS Retail data sources. But as message clearly say this DS is not suppose to be ran in Full mode.
Try to switch you DTPs/Infopackages to Delta mode.
While to checking extraction in source system, within TA RSA3 = Extractor checker, kindly switch Update mode field to Delta.
BR
m./

Error While extracting data from FIAA and FIAP

Hi Gurus,
I am facing error while extracting data from R/3 Source. 0FIAA, 0FIAP datasources. I am getting the same error repeatedly. No data will come BW. When I checked in RSA3 I can extract records.
Ther Error is as follows:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
Kindly help. Your points are assured.
Thanks and Regards
Prasad

Hello Prasad,
Have you already checked what happened in the source system ?
You should verify if a job is running in sm37, or if there is no dump runtime errors due to the extraction in st22.
It could be a clue of what happened in R/3.
Let us know,
Regards,
Mickael

Error when extracting data from R/3 into BW

Hi,
There is an infoobject Payscale Level(Datsource 0paysclaelv_attr) in BW module HR that is extracting data from R/3. While extracting data, the following error occurs "Assignment to feature PFREQ did not take place". I debugged the standard function module HR_BW_EXTRACT_IO_PAYSCALELV and I believe there is definitely an error in the data. But Im not able to find out that record. Has anyone come across this error before? Please let me know if theres any solution to this error. The help for this error provides the following details. But I havent understood it. Any help would be greatly appreciated.
You can assign a specific operation (assignment) to each decision option
within a feature. You can also define decision option ** whose
assignment is effected for all unlisted decision options (this is known
as a default value).
Example:
o                D PERSK
o     K1           &ABRKS=D1,    <- D1 for employee subgroup K1
o     K2           &ABRKS=D1,    <- D1 for employee subgroup K2
o     K3           &ABRKS=D2,    <- D2 for employee subgroup K3
o     **           &ABRKS=D0,    <- D0 for all other employee subgroups
If you now create employee subgroup K4 and the default entry ** is
missing, the system is unable to find a decision option for payroll area
ABKRS.
Procedure
    Define a decision option for K4 or for default value **.

Hi ,
The error is due to the existing customizing of feature PFREQ for MOLGA = 05, there the value to be returned depends on the WERKS, but apparently it was forgotten to add a new line for the "Otherwise" case.
Like it was already done for the case of MOLGA = 03, for example. Please add then a line for MOLGA = 05 and "Otherwise" and the issue should be solved.
If this doesnot solves your issue , then kindly check these OSS notes :
1033423 -> 0PAYSCALELV_ATTR: Short dump feature_error
842212   -> 0PAYSCALELV_ATTR: DataSources deliver wrong results
92055     -> RP_FROM_PERIOD_TO_PERIOD: FEATURE_ERROR dump
Regards,
Lokesh

Runtime Error while extracting data by datasource based on function module

Hi all,
I am facing an issue while extracting data from a customised data source based on a new function module.
The datasource is extracting data successfully for only 15000 records but after that the runtime error is displayed.
I am not able to extract whole data from R/3 system.
Please take a look into the details and tell me what should I have to do.
Details of Issue:
Runtime Error : GETWA_NOT_ASSIGNED
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLZ_99Z_BW_SD_PRICING"had to be terminated because it has come across a statement that unfortunately cannot be executed.
Error analysis
You attempted to access an unassigned field symbol
    (data segment 32790).
This error may occur if
    - You address a typed field symbol before it has been set with
      ASSIGN
- You address a field symbol that pointed to the line of an
      internal table that was deleted
    - You address a field symbol that was previously reset using
      UNASSIGN or that pointed to a local field that no
      longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
      not in the list of active calls. The list of active calls
      can be taken from this short dump.
Edited by: anshu13 on Apr 27, 2010 10:28 AM

The code is displayed here:
error is in line no. 625
Source Code Extract
Line SourceCde
595            <fs_fldval> = l_fieldval.
596            APPEND <fs_dyntable> TO <it_dyntable>.
597            CLEAR :l_fieldval, wa_fldcat.
598            CLEAR l_totlength.
599            CLEAR <fs_dyntable>.
600         ENDIF.
601        ENDIF.
602        MOVE-CORRESPONDING <dd03l_fields> TO wa_dd03l.
603        IF <dd03l_fields>-datatype EQ 'DATS'.
604          l_fieldval = 'X'.
605       ELSE.
606        SHIFT <dd03l_fields>-intlen LEFT DELETING LEADING '0'.
607          IF l_totlength IS INITIAL.
608            SHIFT l_totlength LEFT DELETING LEADING '0'.
609            l_totlength = '0'.
610          ENDIF.
611          l_currlength = <dd03l_fields>-intlen.
612          CONCATENATE l_totlength '(' l_currlength ') ' INTO l_fieldval .
613          l_totlength = l_totlength + l_currlength.
614        ENDIF.
615*** Consider both field name and domian name for checking in range list:
616        IF <dd03l_fields>-fieldname IN s_fieldlist.
617          wa_fldcat-fieldname = <dd03l_fields>-fieldname.
618        ELSEIF <dd03l_fields>-domname IN s_fieldlist.
619          wa_fldcat-fieldname = <dd03l_fields>-domname.
620        ELSE.
621          wa_fldcat-fieldname = <dd03l_fields>-fieldname.
622        ENDIF.
623        ASSIGN COMPONENT wa_fldcat-fieldname
624             OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
>>>>|        <fsfldval> = l_fieldval._
626        CLEAR l_fieldval.
627        CLEAR l_currlength.
628      ELSE.
629        IF <dd03l_fields>-datatype EQ 'DATS'.
630          l_fieldval = 'X'.
631       ELSE.
632          SHIFT <dd03l_fields>-intlen LEFT DELETING LEADING '0'.
633          IF l_totlength IS INITIAL.
634            SHIFT l_totlength LEFT DELETING LEADING '0'.
635           l_totlength = '0'.
636          ENDIF.
637          l_currlength = <dd03l_fields>-intlen.
638          CONCATENATE l_totlength '(' l_currlength ') ' INTO l_fieldval .
639         l_totlength = l_totlength + l_currlength.
640        ENDIF.
641*** Consider both field name and domian name for checking in range list:
642        IF <dd03l_fields>-fieldname IN s_fieldlist.
643        wa_fldcat-fieldname = <dd03l_fields>-fieldname.
644       ELSEIF <dd03l_fields>-domname IN s_fieldlist.
Edited by: anshu13 on Apr 27, 2010 11:33 AM

How to extract data from multiple tables (always got errors)

Dear Experts,
I have a simple mapping to extract data from multiple tables as a source (A, B, C) to a target table (X). Below is the picture:
(Sources)....(Target)
A----------------***
B----------------X
C----------------***
Sample Source Data:
Table A:
ColA1
100
200
etc
Table B:
ColB1 ColB2 ColB3
10 Y Ten
20 Y Twenty
30 Y Thirty
etc
Table C:
ColC1 ColC2
11
12
13
etc
Target table (X) should be (just has 1 group INGRP1):
ColA1 ColB1 ColB3 ColC1
100 10 Ten 11
100 10 Ten 12
100 20 Twenty 21
etc
Scenarios:
1. Directly map from A, B, C to X. Unable to map with error message: "API8003: Connection target attribute group is already connected to an incompatible data source. Use a Joiner or Set operator to join the upstream data first before connecting it into this operator."
2. Map each source to Expression Operator and then map from each Expression to target table. I am able to map all attributes successfully but got error when validating it with message: "VLD-1104: Attributes flowing into TEST.EXPR_SRC.INGRP1 have different data sources."
How can I achieve the correct mapping for this purpose?
Use Joiner? I have no key to join the sources
Use Set? The sources have different number of columns
Thanks in advance
Prat

Thanks Nico,
I think it will results data like this:
100 10 Ten 11
200 20 Twenty 12
300 30 Thirty 13
etc
and not the expected:
100 10 Ten 11
100 10 Ten 12
100 20 Twenty 21
etc
But it inspired me to solve this by adding key expression in each source table (B & C) to be joined to table A with this formula:
100+TRUNC(INGRP1.COLB1,-2)
Regards
Prat

Extract data from datasource 0APO_MSP_CHECK_ORDER error

Similar Messages

Maybe you are looking for