Extract data from ECC6 to Netweaver2004s for BI7.0

Hi Guru's,
I have two systems ECC 6 and Netweaver2004s.For BI7.0 in Netweaver2004s i want to Extract the data from ECC6 into Netweaver2004s BI 7.0.
1.How can i make ECC6 as a Source System for the Netweaver2004s.
2. In Netweaver2004s for BW 3.5 i am getting the Administrator Workbench but objects are still showing the 7.0 properties. How can i over come this issue.
Kindly help me out on this issues.
Thanks in Advance
Regards
Prem

Hello Prem,
1. Basically Tcode RSA1 - Modeling - Source Systems - right click the "Source Systems" on the right - Create - Automitically create SAP system
2. Haven't heard of BW 3.5 based on NW 2004s... Please check the release of BI_CONT component from menu System - Status - Component info. Likely you find 7.0.x instead of 3.5.x
Best regards,
Victor

Similar Messages

Eztract data from ECC6 to Netweaver2004s

Hi Guru's,
I have two systems ECC 6 and Netweaver2004s.For BI7.0 in Netweaver2004s i want to Extract the data from ECC6 into Netweaver2004s BI 7.0.
1.How can i make ECC6 as a Source System for the Netweaver2004s.
2. In Netweaver2004s for BW 3.5 i am getting the Administrator Workbench but objects are still showing the 7.0 properties. How can i over come this issue.
Kindly help me out on this issues.
Thanks in Advance
Regards
Prem

Hi Prem,
I need to correct you first ..:) 2004s and ECC6 both are same and both comes with BI 70. For your question my aqnswaer is get a seperate BI system with that you can connect to either of the servers.
Regards,
Hari.
PS: Points are welcome.

How to extract data from the XL sheet for mapping

Hello all,
I have a scenario of file to idoc, where in the source file contains the information in XL sheet. Can we access the XL sheet data for mapping ? if so can anyone helpme providing the procedure.

Hi,
For reading an XL file u need to write an java code.
refer the below weblog for more help:
SAP Network Blog: XI: Generating Excel files without the Java nor the Conversion agent not possible?
/people/michal.krawczyk2/blog/2005/12/10/xi-generating-excel-files-without-the-java-nor-the-conversion-agent-not-possible
SAP Network Blog: Read Excel instead of XML through FileAdapter
/people/sap.user72/blog/2005/07/04/read-excel-instead-of-xml-through-fileadapter
Thnx
Chirag

How to extract data from a structure?(Data Dictionary)

Hi all,
       This is regarding extracting data from a structure.
For Eg:if we want to extract data from a structure ADDR1_DATA,How will we do that in report programming?Structures on its own has no existence unless it s attached to a database table or view.when am using 'Where used List' on that structure also I am not getting any database tables or views.What can I do about this?
Thanking you,
anjaly

HI Anjaly,
as you said structure does not have any value .. unless something is added to it..
So just use the structure to define the type of the sttructure you want..
Or to include it in your itab like..
data : Begin of itab occurs 0.
       include structure ADDR1_DATA.
data i type i.
       end of itab.
you cannot directly extract data from the structure ADDR1_DATA..
regards
satesh

Extract data from ECC to Oracle using Data Services 4.0

How to extract data from ecc6.0 Business content extractors to oracle using sap bo data services 4.0

Are you trying to use the SAP BW Business Content to extract data out of ECC and load into Oracle tables with Data Services? If that's the case, then you cannot do that. The SAP BW Business Content was developed to only be used in conjunction with SAP BW. When using Data Services to access the extractors in ECC, it has to have an SAP BW InfoPackage associated with it to execute. In this architecture, Data Services is only a pass through from ECC to BW and allows the ability to do some transformations of data prior to loading into the EDW layer (staging tables basically) on SAP BW.
To connect ECC to Oracle, you're going to have to have all of the SAP BusinessObjects supplied Function Modules loaded onto ECC, along with a non-dialog logon account that has the ability to pass dynamic ABAP programs, generate the programs and schedule them. Depending on how you want to process the output, you may also have to have the ability to write to files on the ECC application servers and have an FTP account created on the application servers that can GET flat files and potentially DELETE them (you're going to need to delete periodically, otherwise your jobs will crash when the file space allocation has been consumed).

Extract data from mm and fi

Hi guys,
I have lined up an interview tomorrow where the client wants the person to extract data from mm and fi for a pharma company. What are the things I should concentrate on.
Sincerely

Hi,
Go help.sap.com ..business content part of MM & FI and browse through what all reporting content is delivered by SAP in these two areas.
Also check on how is FI data extracted & how is MM data extracted.
hope it helps
Regards
Vikash

How to extract data from oracle database directly in to bi7.0 (net weaver)

how to extract data from oracle database directly in to bi7.0 (net weaver)? is it something do with EDI? can anybody explain me in detail?
Thanks
York

You can use UDConnect to get from Oracle database in to BW
<b>Data Transfer with UD Connect -</b>
http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/content.htm
<b>Prerequisites</b>
You have installed the SAP WAS J2EE Engine with BI Java components. You can find more information on this in the SAP BW installation guide on the SAP Service Marketplace at service.sap.com/instguides.
Hope it Helps
Chetan
@CP..

BO DI for extracting data from legacy system to SAP BW 7.0

Hi,
Has anyone worked on scenario where BO Data Integrator is being used as ETL tool for extracting data from legacy systems to SAP BW 7.0 ?
Please share your experience on such a landscpae or related documents any of you had come across.
Regards,
Pritesh

There are couple of them - Lawson ERP, Kalido, AS/400. ECC 5.0 might be there as well.
Regards,
Pritesh.
Edited by: pritesh prakash on Jun 14, 2010 2:00 PM

BO DI for extracting data from legacy to SAP BW 7.0

Hi,
Has anyone worked on scenario where BO Data Integrator is being used as ETL tool for extracting data from legacy systems to SAP BW 7.0 ?
Please share your experience on such a landscpae or related documents any of you had come across.
Regards,
Pritesh

Hi,
BO Integrator connects with other system (Database) and you will be creating your reports on the top of that DB or system. It never saw it being used to pull data from legacy to BW.
Regards,
Bashir Awan

Extracting data from xml spreadsheet for JSP

Hi,
Currently i am developing a web application where user can upload a MS excel file, then the application will extract data needed and store into database. But facing problems where those excel files may content massive images that make the file size too large to be upload on to the web. Now i try to export those excel files into xml spreadsheet, to get only text data. Need helps on how to extract data from xml spreadsheet. Which API needed?
Thanks

Without getting into too much detail, a DTD defines the elements that can appear in an xml file, the order they can appear in, which elements can be nested within which other elements, what each element can contain, etc, etc. In short, a DTD defines the structure of the xml file and Microsoft defined a DTD for the xml files that are output by Excel.
This is not taken from an xml file produced by Excel but DTDs look a llittle like this very basic example.
<!DOCTYPE note [
<!ELEMENT note (to,from,heading,body)>
<!ELEMENT to      (#PCDATA)>
<!ELEMENT from    (#PCDATA)>
<!ELEMENT heading (#PCDATA)>
<!ELEMENT body    (#PCDATA)>
]>If you open the one produced for you by Excel in Wordpad or another simple text editor, you may see something like this in there.
However, if you are going to use a parser to access the file for you do not worry about getting to grips with DTDs for a short, simple project.

Looking for SAP solution to extract data from the production system

Hello,
we are looking for the SAP standard tool to extract data from the production system and copy it to the development system. It should be as functional as some kind of partial client copy. The data, which we need to replicate is master and transactional data from FI, CO, AA MM and nice to have FS-RI modules. There is a product offered by the IntelliCorp called "Data Management" but we would like to know if SAP offers its own product.
Kind regards,
Krzysztof Murkowski

Hi,
SAP offers a solution called 'Test Data migration Server' or TDMS.
You can access the master guide from the below link:
https://service.sap.com/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700006332942006E
Cheers !!
Satya.
PS: Pls reward points if the answer was helpful...Thx.

Extraction of data from CRM to BW for datasource 0crm_quotation_I

Hi,
      Extraction of data from CRM to BW for data source 0CRM_QUOTATION_I is taking 27 hours of time to load data into ODS for 1 million records.
Here I am doing FULL LOAD with 4 Infopackages in parllel with different select-options.Even I tried DELTA load but it hasn't worked out properly.
      Is there any solution to reduce time from Datasource to ODS with FULL LOAD. Please help me.

Hi krishna,
                   yes we did enhancement to this data source. In PRDOCTION its taking 27 hours time to load data.
          For extraction from source system (CRM) its taking nearly 24 hours time as per JOb LOG .
08/05/2010 11:53:08 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 10,849 records
08/05/2010 12:02:02 Result of customer enhancement: 10,849 records
08/05/2010 12:02:03 PSA=0 USING & STARTING SAPI SCHEDULER
08/05/2010 12:02:03 Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
08/05/2010 12:02:06 IDOC: Info IDoc 2, IDoc No. 1576298, Duration 00:00:01
08/05/2010 12:02:06 IDoc: Start = 08/05/2010 10:26:37, End = 08/05/2010 10:26:38
08/05/2010 13:02:38 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 10,958 records
08/05/2010 13:11:48 Result of customer enhancement: 10,958 records
08/05/2010 13:11:52 Asynchronous send of data package 2 in task 0003 (1 parallel tasks)
08/05/2010 13:11:53 tRFC: Data Package = 1, TID = 0AA00D0301984C5AEE8E44DB, Duration = 00:16:
08/05/2010 13:11:53 tRFC: Start = 08/05/2010 12:02:19, End = 08/05/2010 12:18:27
08/05/2010 14:30:13 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 11,296 records
08/05/2010 14:39:53 Result of customer enhancement: 11,296 records
like this its taking 24 hours in extraction its self.
Edited by: kotha123 on Aug 10, 2010 12:08 PM
Edited by: kotha123 on Aug 10, 2010 12:09 PM

Currency type 10,30 and 00 need to extract data from R/3 to BI

Hi Experts,
I am working ECC6.0 version with BI 7.0,
I have a issue, when I extracting data from R/3 data source (0FI_AP_3) only currency type 10 comming but I need currency type 30 and 00 also....
when I check in data source abap code it was hard coaded with 10 currenly only,
can any help me to provide your inputs how currecy type 10, 30 and 00 also come to BI.
Regards,
Vijay

Hi Vijay,
0FI_AP_3 is Account payable -Actual line item data source, which was used for fetch actual vendor posting data.
If you are looking for planning and budgeting data then you sud go for 0FI_AP_1 / 0FI_AP_6 / 0FI_AP_7 based on your requirement.
Kindly let me know if you have any question on this.
Regards,
Ashish

Time Stamp Error while extracting data from R/3

Hi,
We are getting time stamp error while extracting data from R/3.
To solve this problem we did replication and run RS_TRANSTRU_ACTIVATE_ALL program. still we are facing same problem.
Please suggest me to solve.
Thanks
Subba Rao

Hi,
Time stamp error arises when the time stamp of the data source in source system and target system are different.
For we have again activate data source in R/3 system using transaction RSA5 or RSA6 and in BI system goto transaction RSDS and replicate the data source.
You can also find time stamp details for a data source in tables ROOSGEN and ROOSOURCE tables in BI and R/3 system respectively.
Here are some useful links.
[R3 016 Time stamp error where is it in BI?;
[time stamp error in bi7;
[Timestamp error in BI7;
Thanks,
Venu

Problem extracting data from R/3 to BW using infopackage?

Hi all,
I am trying to extract data from R/3 to BI7.0 through infopackage and its giving below error.
Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
No Idocs arrived from the source system
In the details tab:
Extraction (messages): Missing messages in yellow status
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings in yellow status
Data Package 1 : arrived in BW ; Processing : Selected number does not agree with transferred n
Processing (data packet): Everything OK in green status
Data Package 1 ( 370 Records ) : Everything OK
Inbound Processing ( 370 Records ) : No errors
Data package 1 received; Processing is starting
Update PSA ( 370 Records posted ) : No errors
Data package 1 is being saved...
370 records for data package 1 updated successfully, 0 records filtered
Processing end : No errors
Inbound processing of data package 1 finished.
Please anyone try to look at this issue and give me better soluttion ASAP.
Thanks,
Suresh.

Hi ,
The infopackage run for avery long time in yellow state with out changing to green, This might happen due to connection error(get in touch with your basis team) or due to over load on the system.
eventhough the status of request is finished in source system, the job will be executing in the BI.
1)Wait for sometime for the request to turn out green automatically or
2)make the request to red and delte, repeat the infopackage step.
3)IF you know about the no of records that need to be transferred and if the total records are transferred already, manually change the request to green.
Cheers,
Srinath

Extract data from ECC6 to Netweaver2004s for BI7.0

Similar Messages

Maybe you are looking for