Extract data off a broken MacBook Pro 15" Retina Display Mid 2012?

Hi,,,
I had a problem with my MacBook Pro 15" Retina Display Mid 2012  - display and something ending with logic being broken = black screen. Since is was over £1000 to fix it, i decided to buy a new Macbook pro with Retina Display 16gb ram, 512gb.
Now, what is the best way to retrieve the data out off the old macbook pro SSD? If I open the computer and take it off, how do i connect it to my new mac? is there a cable to connect to the SSD, as i searched and can't find. Really need to transfer all my files that is inside the old mac to the new one.
Thank you in advance for the help

Remove the SSD from the old MBP and put it in an external USB enclosure. Connect to your new MBP and transfer your files. You can find a good enclosure at OWC.

Similar Messages

  • Is it applicable to run windows 8 on macbook pro, 13" retina display, mid 2014?

    I wanna bootcamb windows 8 on a macbook pro 13" retina display mid 2014.
    is it possible, specially that my drive is 128 GB only? does windows properly working?

    Hi ..
    It is, but be aware, Windows 8 requires approximately 16GB's of storage space and you would have to partitition the hard drive.
    Strongly recommend reading the entire Boot Camp user guide before proceeding >  Mac Basics: Using Windows on your Mac via Boot Camp
    You will need to purchase a Windows install disc.
    Alternatively, check out VMware as well as Parallels

  • Connect two external monitors to Macbook Pro (non-retina, 13", mid 2012)

    I've connected one external monitor to a Macbook Pro (non-retina, 13", mid 2012) using a Mini DisplayPort to DVI adapter.
    Can I connect a second external monitor using a USB to DVI or USB to HDMI adapter? Will the Macbook Pro recognize a monitor connected to the USB port?

    Something like this -> http://www.monoprice.com/Product?c_id=101&cp_id=10114&cs_id=1011404&p_id=6191&se q=1&format=2 - from MonoPrice may work.
    Clinton

  • Hello, I have MacBook Pro with Retina display. How can I get retina support to my Adobe Acrobat pro? It is version 10.1.13 and it says it is up to date.

    Hello, I have MacBook Pro with Retina display. How can I get retina support to my Adobe Acrobat pro? It is version 10.1.13 and it says it is up to date.

    Problem is that my pdf files look terrible although I have MacBook Pro (Retina, 15-inch, Mid 2014). I have Adobe Creative Suite Design  Standard version 6.0 (Mac). I have installed every possible update. I think problem is that for some reason my CS doesn´t support retina display? If I view a pdf file in iMessage, it looks fantastic. But if I open the same document in Adode Acrobat Pro, it looks awful. What can I do?
    Thank you so much for your help.
    Pekka
    Pekka Saatsi
    arkkitehti SAFA
    SAATSI arkkitehdit oy
    Bysmedsintie 56
    06500 Porvoo
    040 5955933
    [email protected]<mailto:[email protected]>
    www.arks.fi
    Anubha Goel <[email protected]<mailto:[email protected]>> kirjoitti 24.3.2015 kello 4.10:
    You have been mentioned
    by Anubha Goel<https://forums.adobe.com/people/Anubha+Goel?et=notification.mention> in Re: Hello, I have MacBook Pro with Retina display. How can I get retina support to my Adobe Acrobat pro? It is version 10.1.13 and it says it is up to date. in Adobe Community - View Anubha Goel's reference to you<https://forums.adobe.com/message/7335644?et=notification.mention#7335644>

  • My macbook pro w/ retina display fell sideways on the charger and now the charging works on and off.

    Hey,
    So my macbook pro w. retina display fell off my bed (only like 1 foot though and on carpet) sideways on the charging port. Now when the charger is plugged in -- it sometimes stops charging like it's not connected.
    Hope the damage isn't too bad but would like to know what to do.
    thanks!

    First time I've seen this problem - can you power on while holding down the Shift key.
    And, yes, if you're within 14 days of purchase you can return it for a replacement or refund. I'd let the Apple folks look at it before deciding what to do.
    Clinton

  • MacBook Pro with Retina display to imac

    Hi
    Can i connect a MacBook Pro with Retina display to a mid 2010 imac 27"    ?    in ANY way?     to use as a second screen... HDMI to mini display.. ive a feeling  i know the answer but its worth asking.....
    thanks!

    Ha, "their" my teenagers would certainly point that out.
    "true to say the imac isn't the most upgrade friendly"
    Well it's just taking that front glass and the LCD off. The earlier ones had the hidden latches and the special tool to release it. "Took quite a technique to remove it. I just did one where someone had just broken the latch and glued it back.
    "i just replaced the dvd drive, i could never go back to mechanical."
    That's for sure. As soon as I put my first SSD in this early 2011 MBP 13" I realized that there was a reason why all the Airs could get buy with just 2 or 4 GB RAM.
    "currently budget isn't an issue"
    That must be nice.
    "this is testament to apple - there is no way a pc would have held up this well,"
    Yes, I'm still using a 20" and 2 22" ADC Apple Cinema Monitors on my workbench w/ a 2002 Power Mac MDD G4, a 2011 Mini i5 and a 2006 iMac. There's a working SE and IIfx in the closet.
    " initial pain of purchase"
    Yup that IIfx originally cost $9,900 in 1990. I got it for half price!
    There's a 27" iMac for sale here in the NW. I'm looking at it to replace the Core 2 Duo.
    "imac is still a great machine with a georgeous screen"
    Yup until last year I administered 88 PCs at a charter school. I found looking at those displays and jittery windows all day long really irritating. Of course I'd try to "2 finger scroll" and use "Gestures" to move to a new desktop until I remembered "Oh right, PC, crap."
    Good luck and thanks for the checkmark.

  • I buy the new macbook pro with retina display next week ... is it normal if i dont have my invoice ? (by mail) ? maybe 4 to 5 day i buy it

    The 30 October i buy a macbook pro with retina display (On Apple store)
    And it's suppose to receive a invoice by Email but i don't have anything ??
    Thanks

    In all the cases I have seen of users who buy a MacBook Pro, they come charged, maybe not fully, but a bit to run Setup Assistant.
    If I were you, I would carry on using the MacBook Pro unless you find it has got a problem. If it does not work properly, return your MacBook.
    You may want to erase the hard drive first, so hold Command and R keys while your Mac is starting to start up in OS X Recovery, open Disk Utility and erase Macintosh HD > http://pondini.org/OSX/DU2.html Choose one of the secure erase options to make sure your data is unrecoverable.
    Finally, close Disk Utility and reinstall OS X. When the reinstall finishes, turn off your computer and return it

  • I just brought Macbook pro(without retina display) on 15 june 2013 and since then put it on 6-7 hours of charging but still my macbook pro is not 100% charged. but why? (green light is displayed on the adapter pin)

    i just brought Macbook pro(without retina display) on 15 june 2013 and when i switched it on the battery was 72 % charged and now the battery is charged to 62%, i used the charger that came with it and kept it for 6-7 hours on charging but it is not charged to 100% but why? also the green light is always on when i plug the charger with my mac book pro.Please tell me the meaning of Green light on power cord lid (mac book pro not charging or charging?) and also the other light if there like amber or any other colour.

    Hello Shailendras33,
    Congratulations on your new MacBook Pro!  Thank you for providing all the information about what is going on with the charging issue. 
    Firstly, I found some information on page 11 of the MacBook Pro User Guide about what each color of the LED means on the Power Adapter:
    When you first connect your power adapter to your MacBook Pro, an indicator light on the
    MagSafe connector starts to glow.  An amber light indicates the battery is charging.  A green light indicates that the battery is fully charged.
    You can find the MacBook Pro User Guide here (this is not for the latest MacBook Pro, but the information about the MagSafe adapter is true for the newest model):
    MacBook Pro User Guide
    http://manuals.info.apple.com/en_US/macbook_pro_15inch_late_2011.pdf
    It sounds like you are not getting the amber light indicating your computer is charging, and you are noticing that the battery level is depleting.  I recommend resetting your System Management Controller when something like this is occurring:
    Resetting the SMC on portables with a battery you should not remove on your own
    Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    You can find the full article here:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    Thank you for posting in the Apple Support Communities. 
    Best,
    Sheila M.

  • On my MacBook Pro with Retina Display, Why does the "USB Devices Disabled Unplug the device using too much power to re-enable USB devices" keep coming up after I unplugged the usb device?

    On my MacBook Pro with Retina Display 15", that I purchased a few weeks ago, started coming up with the following message on my desktop:
    "USB Devices Disabled Unplug the device using too much power to re-enable USB devices".
    I unplugged the device and the message still keeps coming up.
    This is what I have done so far to troubleshoot:
    I shut down the laptop. When booting up I pressed the command+option+p+r at the same time. It comes up with a menu to reinstall OSX, Get help online, Run Disk Utility, etc. I choose the disk utility and repair the disk and then restarted.
    The message keeps popping up and I can't seem to get rid of it. Why does the message keep popping up even though I don't have any devices hooked up to the laptop at all? Any help to reenable my usb ports and get rid of the messaage would be helpful.

    I talked to Apple Support and we at least stopped the bleeding, a little bit. These are the troubleshooting steps I did before I contacted Apple Support:
    1. Reinstalled OSX
    2. Restore the last known good Time Machine Backup.
    This did not fix my issue, so I called Apple Support and they told me this:
    1. Turn Power off.
    2. Wait 15 seconds.
    3. Plug in Magsafe adapter.
    4. Wait 15 seconds.
    5. Hold down the Shift+Option+Power Button for 20-30 seconds.
    6. Turn Power back on.
    Ok, this stopped the bleeding a little, but as soon as I plugged in a Apple USB Superdrive
    and a Apple Mini Displayport to VGA Adapter. This "USB Devices Disabled" pop-up pops up like every 30 minutes now. At least, it is not constantly popping up after I close it, so I guess it will do for the temporary. Going to contact Apple support, later, though to see what else can be done.

  • Windows XP on macbook pro with retina display?

    I am going to be helping a client with putting Windows XP on a brand new Macbook Pro with retina display later this week.
    This client has two programs that are XP-specific, and MUST be run by booting XP fully and not virtually with Parallels or other options.
    So we are going to be using bootcamp.
    We have the XP install disc, and an external USB CD/DVD drive from Apple.
    I've found postings online about people installing more recent flavors of Windows (Vista, 7, etc) on these machines
    but I haven't found anything about Windows XP on the MBPro with retina display.
    Anyone have any tips to share?
    This should still be possible and not a big problem, right?
    Yes, I know the resolution will likely be the biggest issue, but it should still install and run, yes?
    Thank you for any helpful info anyone can provide.

    First off there are no programs that are XP specific and no programs, that I know of or ever heard of, that can not run in XP in a virtual machine.
    Most all programs that will run on XP will run on Win 7, unless they are older programs. Those older program that will run on XP and not on Vista or 7 will also run on Win 2000 or 98SE. So as stated before I don't know of any programs that will only run on XP and no other operating system.
    A Virtual Machine is Just That, IE a set of Virtual hardware. The Operating system has No Idea it is running in a Virtual Machine on top of a Host operating system. They are completely separate except for the VM using some of the physical hadware in the host computer. Like the USB ports, the network interfaces and the CD/DVD drive. And the VM software is made to allow those devices to look like they are part of a Physical computer the VM OS is running on.
    So I have not idea what these programs could be that would not run on/in a Virtual Machine with XP Installed.
    Please let me know for future reference.
    So your options are.
    1) Install a Virtual Machine software program. VMware Fusion, Parallels or Virtualbox. Then install Win XP into a Virtual Machine.
    2) Buy and older Windows computer that will run XP natively. It doesn't need to be that old, 3-4 years old will do as most all major PC manufacturers have XP drivers for their 3-4 year old computers and most if not all hardware manufacturers, Vid cards, Ethernet & WiFi cards, still list drivers for XP.

  • How to completely remove mac os and install windows 7 on macbook pro with retina display 15 inch

    how to completely remove mac os and install windows 7 on macbook pro with retina display 15 inch

    There's not much sense in purchasing a Mac to run only Windows on it.  Keep in mind that drivers for Windows are a secondary concern for Apple.  While Windows will typicall run fine, things like power managment are not optimized under Windows (you'll get less time on battery while running Windows).  You will also not be able to install firmware updates.  Firmware updates might be necessary whether you run Windows or OS X as they are updates to the code in your hardware and are not OS-specific.  You must be running OS X in order to install a firmware update.  You can do this even if you boot off of an external drive with OS X installed on it.  At the very least, you should keep just a small partition for OS X on your internal drive. 

  • Reason for blurring of text in MacBook Pro with retina display?

    I was in an Apple store recently and examined a 15-inch MacBook Pro with Retina display.
    I noticed that when I expanded the size of the text (using the touchpad) on the Apple web page on the screen that there was a brief blur in the appearance of the text before the text looked sharp again at the larger size.
    I asked an Apple person at the store why this occurred. He claimed that the brief blurring of the text that I saw when I expanded its size was due to my eyes adjusting to the rapid change in text size.
    The answer appeared ridiculous to me. I have a 17-inch MacBook Pro about 5 years old as well as an iPad 2 and iPad mini. On none of these machines have I seen the temporary blurring of the text appearance when increasing its size.
    Is there an inherent problem with retina displays that causes this problem?
    Thanks for your help

    Nah, it was due to the image zoom being processed off the server for the Apple website and the likely clogged connection wifi speeds off the local router in that specific Apple store.
    most websites are not designed for retina level viewing either
    Ive done zoom in on a Retina here at the house with 30MB down speeds and never had a blurring unless it was coming off a jammed up server from a specific website that was slow.

  • Sir / Madam        Actually I am willing to buy Apple (MD101HN/A) 13" MacBook Pro with Retina Display 2.6GHz. I am from siliguri, Dist Darjeeling, West Bengal, India. But currently i am unable to buy your product due to unavailability of your mentioned pr

    Sir / Madam
          Actually I am willing to buy Apple (MD101HN/A) 13" MacBook Pro with Retina Display 2.6GHz.
    I am from siliguri, Dist Darjeeling, West Bengal, India. But currently i am unable to buy your product due to unavailability of your mentioned product in India. so can you please inform me at least a confirmed date when will be the product available. because it's really a urgent for me. So please give a reply with a confirm date.
    Yours Faithfully
    Saikat Nath.

    This board is just other users, there's no one here from Apple to answer a question like that. Sorry.

  • 15" Macbook Pro with Retina Display Lock

    Can someone recommend me a good solution for physically locking my 15" Macbook Pro with Retina Display? I'm going off to college soon and need to be able to tie the computer up to my desk.
    I have a plastic case on my MBP and would definitely want to keep it on. Also I would like to have a solution where it's not going to be off-balnced on one side as I've seen with some products online. I have major OCD so I am looking for the most close to perfect option that doesn't take away from the beauty of the MBP or the physical functionality of the computer. Also, I am definitely not looking to screw anything to the MBP, to be clear.
    Thank you for your help.

    Buy the USB SuperDrive

  • Random internet slowing down on MacBook Pro with Retina Display

    Hi there!
    I have a 15" Macbook Pro With Retina Display, 2.6 GHz Intel Core i7, 16 GB 1600 MHz DDR3, Intel Iris Pro 1024 MB, OS X 10.9.2 (13C64). late 2013
    for some reason since the last system upadate, my internet on my Macbook has been slowing down at random times during operation, sometimes I am using facetime and browsing Safari, facetime continues operating normally but everything else relted to the interent would show me that there is no internet connection "Basically i cannot use anything related to the internet unless i turn off and on the wirless adapter. and its not just while using Facetime and safari but Safari alone aswell "one second am using the internet no problem playing video on youtube and checking facebook and all the sudddent it stops loading and tells me that there is no internet connected though the wireless indicator shows otherwise.
    I have really fast internet and am the only one using it, i have comcast Blast Plus "57 MB/S download speeds".
    could u please help me get the bottom of this random occuring issue ?

    Troubleshooting Wi-Fi issues in OS X
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)
    Wireless Diagnostics - About
    Also try turning off Bluetooth

Maybe you are looking for

  • Why do I not have the option to publish my video demo to Adobe Connect?

    I'm new to Captivate and recorded a video demo for my co-workers instructing how to set up and run an Adobe Connect Meeting. We have an account to publish Adobe Presenter and Captivate content to Adobe Connect Pro, and use it to host our Adobe Presen

  • Accessing the device from one node to antoher node

    Hi All , I have one local devices c1t0d0, the corresponding DID is d4. I want to access this device in another node. how to access this? Regards, R. Rajesh Kannan.

  • Dataguard Solution for standby redo log file groups

    Respected Experts, My database version is 10.2.0.1.0 and Red Hat 5 os.I want to create a standby database using RMAN. Can any one help me with the full steps.And i'm also confuse about number of standby redo log file members need to be created. Thank

  • Save photos from a web page

    Hello everybody: I'd like to save a photograph taken from a web page as a jpg file. I have written the following application, but It doesn�t work. public static void main(String[] args) { try { URL url = new URL ("http://ia.imdb.com/media/imdb/01/I/6

  • CR  XI Installation Error

    I'm reinstalling CR after rebuilding my computer.  Towards the end of the install I get the following error: "Cannot get a valid key code" and the install completes.  When I launch CR the error: "could  not load keycode.dll".  Any thoughts.  Thank yo