Extract Filter Plug-in Not working

I tried to install the optional extract filter on CS4 Extended by dropping it into the photoshop filters folder. When I tried to open it a message comes up that says "Could not complete your request because it is not the right kind of document." When I restart photoshop it says the filter is not designed to run on windows or it contains an error. Anyone know what I'm doing wrong?

You are trying to use the 64bit version in a 32bit PS or vice versa. Find the correct respective version on your disc and install it to the correct directories.
Mylenium

Similar Messages

Filter option is not working in Reuse alv grid

Hi all,
Filter option is not working in alv grid properly.
if i choose one particular field for filter option .it is working .but another field it is not working though it contains different values.please give the answer.whether i have to pass filter option throuogh reuse_alv _grid or not.thanks in advance
raj

Hi raja,
1. The search/filter is
CASE SENSITIVE
2. U can give *
to search for pattern.
(IN THAT CASE, it is NOT Case Sensitive)
regards,
amit m.

Extraction and Reporting is not working in BI SYSTEM

Hi,
The BI developement r shows error an License Expire.Currently i change the system date and working fine. If changing the system date modeling part is working fine. But extraction and Reporting is not working. please help me to solve this problem.

HI,
If the license is expired then appky for the permanent license from Service market place and install it in the system through SLICENSE TCode. For this you need to have S-user ID to access service market place to apply for license.
Regards,
Sharath

Why is the "plug in" not working every time i try to stream?

Why is the "plug in" not working every time i try to stream?

If you own "Sausage Fattner" you'll find a update in your email that solves this problem.

Delta download of material with filter on "ZFIELD" not working :-(

Hi
We have made a new field in basicdata of the material master (table MARA). We would like our EBP material filter to react on the value of this field. But it's not working
In table SMOFFILFLD we have added the new field: Objekt MATERIAL table MARA field ZOVEBP. Now the field is available for the filter setup in R3AC1. I then setup the filter for the field
TABLE FIELD OP LOW HIGH Incl./Excl
MARA ZOVEBP CP Contains Pattern X I Inclusive defined set/array
If I try making the filter on a standard MARA field ie. MATNR it working just fine...
What to do?
Thanks,
Jacob Stisen

Hey
I have a way to find out why? ( I see no reply on this thread! let me give a try)
open the function module CRS_FIRST_DOWNLOAD_TRIGGER and load the data and debug the steps with as minimum material as possible; you can change the filter at R3AC1 to different product category which has less materials and do the debugging during this initial load.
Let us know what was the error!
Also you may like to refer
Note
309734 - CRM/EBP server: General analysis of initial load
443900 - Error analysis in the adapter framework
337753 - CRM/EBP server: General analysis in upload
337703 - CRM/EBP server: General analysis in delta download
156102 - R/3 plug-in installation for CRM
Please reward if this info is of any help.
Thanks
Kasee Palaniappan

What's With Volume Logic Plug-In Not Working With iTunes V7. and Up

Hello Folks. I recently updated to iTunes ve 7.0.2 and now my great Volume Logic Plug-in won't work. I downloaded the latest update and then read info on the Plantronics site about the problems with the plug-in with new itunes updates.
Is anyone here figured out what's going on or a workaround. That plug-in makes such a positive difference in music sound quality, the tunes almost feel "naked" without it
Steve

Prior to the 1.3.2 released (beta or the now-available final), Volume Logic did not work at all with iTunes 7. According to Plantronics, Volume Logic does not work with Airtunes and the AIrport Express (it's stated right in their FAQ).

Filter and navigation not working properly

Hi Gurus,
I have two reports - report1(source) and report2(target) report.
In report1, it shows two columns - Market_ID, Amount_sold
In report2, it shows two columns - Market_ID, Reasons(where Market_ID is made prompted)
In report1, I have made the Value Interaction as 'Navigate' and the target as 'path of report2' in Column properties ->Column Format
But, when I click on Market_ID(report1), it is NOT showing the details of that particulat Market_ID(report2).
It is showing the details of whole Market_ID in report2. That means, the filter is not working properly.
Is there any method in which the report2 shows the details of particular Market_ID which is selected from report1(market_ID)?
Best Regards,
J

yes you can,
in your source add a master_name column and in that make the navigation.
in the master_id column go to column format and style options and check the Use Custom CSS style option and type,
display: none
now in your source the master_id column will get hidden. in your target make the master_id prompted.
now click on the master_name in your source, your target will get filtered by the corresponding msater_id
thanks,
Karthick
Edited by: kart on Jun 7, 2010 11:52 AM

Accidentally deleted x protect meta.plist and plug in not working even after downloading latest

Hi all
Need some help here. It started off like this - after upgrading to mavericks, i had a problem viewing some java stuff. Googled and read somewhere to delete the x protect meta.plist and thus, did so. After doing that, my youtube videos etc all couldnt work. So googled again and did whatever the rest suggested - download latest version of Java, uninstall java and reinstall again, install other versions of java etc etc. all didnt worked.
Someone just pointed out that I had deleted a very critical security file (x protect meta.plist) and might have more problems that I thought on my hand.
Im not very technical or IT saavy, so please kindly advise. Most of the problems surfaced after deleting that file. And right now, plug in for videos are still not working even though I have attempted various 'solutions' suggested in this forum (the not too technical ones) and java is still cranky. Pls advise. thanks!

Anyone able to help?
1) How did u solve the missing/out of date plugin?
- Have tried installing numberous times the latest version - doesnt work
- Tried uninstalling and then reinstalled earlier versions of java - doesnt work too
read somewhere to delete the xprotect meta plist - realised much later that piece of advice was for snow leopard OS and thus, did not work too. A forummer told me today this file is a critical security file and i should not have deleted it. WHat can I do now?
current situation:
still cant play youtube videos and other videos.
java on some sites still cant work

DTP filter routine is not working

Dear gurus
I am working with BI 7 and I have created following filter'routine in the DTP.
But the routine is not filtering.
The statement : read table l_t_range with key
                           fieldname = 'CLEAR_DATE'.
is not working. sy-tabix = 0
Fieldname is really CLEAR_DATE
Please can you tell me what is wrong in the routine
data: l_idx       like sy-tabix,
        w_date      like sy-datum,
        w_date_low like sy-datum,
        w_date_high like sy-datum.
read table l_t_range with key
       fieldname = 'CLEAR_DATE'.
l_idx = sy-tabix.
w_date = '20090705'.*
w_date = sy-datum.
    w_date+6(2) = '01'.
    w_date_high = w_date - 1.
    w_date_low = w_date_high.
    w_date_low+6(2) = '01'.
    l_t_range-low = w_date_low.
    l_t_range-high = w_date_high.
    l_t_range-sign = 'I'.
    l_t_range-option = 'BT'.
    modify l_t_range index l_idx.
p_subrc = 0.
Edited by: Firmin Kouassi on Nov 3, 2009 12:04 PM
Edited by: Firmin Kouassi on Nov 3, 2009 12:05 PM

Try adding the following:
l_t_range-fieldname = 'CLEAR_DATE'.
to your code:
l_t_range-low = w_date_low.
l_t_range-high = w_date_high.
l_t_range-sign = 'I'.
l_t_range-option = 'BT'.
And at the end append/modify like this:
if l_idx NE 0.
    modify l_t_range index l_idx.
else.
    append l_t_range.
endif.
p_subrc = 0.

OBIEE - Filter SQL Expression Not Working At All - Shows SQL But Not Result

Im at my wits end for this
I have a report where I am using a filter with a simple SQL expression
cast ( timestampadd(SQL_TSI_YEAR, -1, Cast(Cast(DATE '@{pv_as_of_date}{2013-04-01}' AS CHAR) AS TIMESTAMP) ) as DATE)So an end user may input a date and this is passed into the filter via a variable
pv_as_of_date
This is defaulted to 2013-04-01
I want to subtract 1 year to make the end result
2012-04-01
When I run the report I am seeing two issues
1) When displaying the filter at the bottom, I see the full SQL code. Shouldnt this show the date returned? In this case shouldnt the filter show 2012-04-01?
2) The filter does not even work which is my bigger problem
I tested the above code in a column and I KNOW that the date is being returned as expected
But when I use the same SQL code in the filter then it doesnt work
Am I missing some special button some where to enable SQL expressions?
Any help immensely appreciated

Ok
So I was able to find an option "Protect Filter" that seemed to make a bit of difference and I got the date part working after using the above corrected code (thanks)
But now I want to add in the rest of my filter conditions and it does not seem to be liking it
Im trying to use this filter
'Acad ' || cast ( cast (substring ('@{pv_acad_year_desc}{Acad 2013/14}' , 6, 4) as integer) - 1 as char(4)) || '/' || cast ( cast (substring ('@{pv_acad_year_desc}{Acad 2013/14}' , 11, 2) as integer) - 1 as char(2))Im expecting the output to be in this case
Acad 2012/2013
When I test the above code in a column it works just fine, its just again in the filter that it isnt working

Flash Plug In not working

Hello. I have been having some serious trouble playing videos
on Youtube and Video Google. I don't know if something got messed
up on my computer or what. I had trouble watching anime on my new
system. (Youtube and Google video used to work fine before this).
So I downloaded Gspot to tell me which codecs I needed. It said
Xvid. I read on some sites like vidoehelp.com what other common
codex I should install so I installed Xvid, FFDShow, and divX. My
anime didn't work. I uninstalled all of them. I tried a K-lite
codec pack since that worked on my old system, anime still didn't
work. So I uninstalled that one. My youtube and google video audio
from this point on has not worked. I deleted the remnants of the
folders of Xvid, ffdshow, and divX after I uninstalled them,
reinstalled them, and for some reason, my anime worked. (I also
installed WMP 10 insted of WMP 11 since I didn't like WMP 11). I
uninstalled my flash plug in with the uninstall_flash_player.exe,
rebooted, and re-installed it. I reinstalled my realtek audio hd
driver (I have the Abit AW8D mobo). I still do not have any audio
on these streaming websites which I am guessing use the flash
plug-in. Any advice? Thanks!

If your device is a Galaxy Tab 3 10.0 then you have an Intel Android device. Adobe never released an Intel versions of Adobe Flash Player. In addition Adobe has stopped releasing new versions of Flash.
You would need an ARM based Android device to play Flash content. In addition Google removed key bit of code that allowed Flash to work as of Android 4.4. Adobe Flash on Android does not have a future.

Adobe Flash plug-in not working in Safari

I was trying to use s broadcasting stations player, and it asked for installation of a newer version of Flash. I have downloaded and installed the newest V 16 of Flash but it does not work on the broadcaster's player. However I can play back the content perfectly on Chrome. This therefore seems to be a Safari problem. I have Safari version 8.0.3 (10600.33.18) installed on an iMac 27" Retina 5K running Mac OS X 10.10.2.
Can anyone help?

Are Plug-ins allowed?
    Safari > Preferences > Security
    Internet Plug-ins > "Allow plug-ins"
    Enable it.
If that is not the problem,
    Uninstall Flash
    http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html
   Reinstall Adobe Flash.
   http://get.adobe.com/flashplayer/

Smart collection has "source color profile" as filter option, does not work on camera profiles

In Lightroom 5 i tried to use the "source color profile" filter option in smart collection, however it only seems to work on rgb files (jpg, tiff) that have a profile embedded. It does not work on values like "Adobe Standard" which is a "source" profile of a RAW file, or any of the camera profiles i can choose fo given Raw file. What am i doing wrong?
The Help does not give any clue on this, nor does the coverage by any of the Lightroom guru's like Juleanne Kost.

In my opinion the filter is acting correctly.
The Adobe Standard profile is not a profile defined in the source file, it is a profile assigned to the file in the raw converter and used with raw files that do not have a source color profile, already, so to me the filter is acting correctly because “source” means where the profile comes from, rather than what profile a master photo has had assigned to it.
The source-color-profile option is useful to determine the size of the color gamut in a file’s color numbers which indicates its suitability for various purposes: An sRGB file can be safely uploaded to the web, an AdobeRGB file is going to look right on a wide-gamut monitor and printablebut shouldn’t be uploaded to the web, while a ProPhotoRGB file has a large color space and can be safely edited in a way that adjusts the colors significantly, especially if it is 16-bit, without color-banding or posterization, but a ProPhotoRGB file will probably not look good if directly uploaded to the web or sent to a print-shop that doesn’t do their own color profile conversions.
I would agree that being able to filter raw files based on the assigned color profile would also be useful, but this is a different thing, to me at least, than filtering by the source-color-profile.

Filter in RSPLSE not working.

Hi,
I have made the Lock setting for one of the IP query in RSPLSE EXPERT mode. It is working fine in Dev environment. But I have transported settings to Test and it is not working there. Please elt me know what I could be missing out.
Thanks in advance.
Prakash C

When you are zoomed out, many pixels are averaged into a single display pixel. For performance reasons, the sharpening is previewed on that downsampeld version of the image. When you apply the filter, it applies to the full resolution version of the image, which then gets downsampled again for your zoomed out preview.
So, let's say you had a grid of black and white pixels. Zoomed out, it looks like gray. Sharpening would appear to have an effect depending on the zoom level, but would never have any effect on the base level.
And no, there is no way to keep performance reasonable and give you an accurate preview of applying the filter to the full resolution image.

QuickTime Internet plug-in not working????

I can't see media in webpages. I just installed Q.T. 7, and it's not working. Can somebody please tell me what to do?

Apple Discussions!
"tried the flash recommendation wihout success."
Did you repair permissions & restart after installing flash? If so, then try the following:
To fix a QT related problem w/Safari, quit Safari & look in the /Library/Internet Plug-Ins folder (this is the Library folder at the root level of your HD, not the one inside your Users/user name folder).
Try removing the VLC Plugin.plugin (if you have it) & *QuickTime Plugin.webplugin files from this folder, & then relaunch Safari. If the problem isn’t fixed, a different plug-in may be to blame. Keep removing files from this folder (start with any third-party plug-ins that are present) until the problem disappears.
Replace the plug-ins that don’t cause any problems.
MacAddict Magazine...12/06
*Edited by Baby Boomer
=======================
Rosetta
If you have an Intel-based Mac, running Safari in Rosetta can also resolve some QT plug-in issues.
First quit the app if it’s open & then, in your Applications folder, select Safari & press Command+I.
In the General area of the Safari Info dialog that appears (click the disclosure triangle if this area is not already expanded), select Open Using Rosetta, & then close the Safari Info dialog.
Relaunch Safari.
==================
Safari 2.0 Help Webpages aren't working (indicated by boxes with question marks)

Extract Filter Plug-in Not working

Similar Messages

Maybe you are looking for