Extract R/3 Hierarchies Directly into BW

I'm going to create a DataSource on R/3 system to extract the R/3 hierarchy into BW. I have read the article concerning this, but the are some unclear moments to me about R/3 hierarchies.
What if I just have created General Hierarchy via transaction MCK1, whether it is possible to extract that kind of hierarchy into BW? How the General Hierarchy database table could be found?
By the way, is the are any "how to" about R/3 hierarchy creation?
Thanks in advance

Similar Messages

HT3728 No status light at all on Airport/Time capsule. I can plug internet cable directly into bac of my MAC and have internet access no problem. Is my Airport dead and need to be replaced??

I have NO status light on my Airport/Time Machine, I unplugged the internet connection from back of Airport and plugged directly into my MAC and am able to get to the internet just fine.
The Airport is almost 6 years old
Is my Airport dead and just need to get a new one??

Is my Airport dead and just need to get a new one??
Unfortunately, yes. On the upside, your Time Capsule lasted about twice as long as normal.

How do I capture tape-based media to my external hard drive? There is only one firewire 800 port on the back of my I mac. The manual says to import tape footage directly into fcpx, but then I lose my external hard drive. thanks for your help.

In FCP X How do I capture tape-based media (hdv clips)- which I want to import-to my external hard drive? There is only one firewire 800 port on the back of my I mac. The FCPX manual says to import tape footage directly into final cut, which works, but then I lose my external hard drive Do I have to import it into an event, then copy it over to an external hard drive? On Larry Jordan's tutorial, he has 3 external hard drives that show up on his monitor WHILE he imports his tape based media. How is that done? I can only get either the camera to appear OR my external hard drive. thanks for your help.

Thanks for your response, but that doesn't solve the problem. Yes, the LaCie hard drive has 2 firewire ports-
I have always done what you suggest (works fine in FCP7), but in FCPX when I do that the camcorder icon
does not appear. It only shows up when I DIRECTLY import the footage via firewire. ????

How do I import an Iphoto Project (book) directly into Aperture 2?

I have a book that I did as a project in iPhoto '08 that I would like to import directly into Aperture 2 and "redo" the book using Aperture's new features.
Although I imported my iPhoto library I don't seem to have this project in Aperture and when I look to export the project from iPhoto it wants to export it as a movie.
Since the photos from iPhoto are in Aperture I figured that importing the iPhoto project would be easy. I don't want to recreate the book again if I can help it - I just want to import and modify it in Aperture.
Is it possible to do and can anyone tell me how to do this?
Thanks,

You CAN completely customize the text in iPhoto books, including left/center/right justifications, and it is fairly easy. Here's the workaround:
1) In your iPhoto book (or calendar or whatever) layout, highlight the text you want to modify or change its alignment.
2) Launch TextEdit and open a blank document. Paste the text from iPhoto into the document.
3) Still in TextEdit, highlight your text. Using ordinary word processing methods, modify or realign your text as desired. When satisfied, highlight the customized text and copy it.
4) Back in iPhoto, paste the newly modified text you just copied from TextEdit into the desired text box, overwriting (or deleting first) the original text. All the modifications you made in TextEdit should apply.
This trick can work wonders for helping make an iPhoto book completely your design.
--bosskev

Can No Longer Drag JPG files From Finder Directly Into .fla Stage?

For the past six months I have been following a manual process to convert JPG files (exported from InDesign) into SWF files for display advertising assets.
Using pre-built FLA files as templates (configured with clicktags):
Open FLA templates (3 separate files for 3 IAB ad sizes)
Drag JPG from Finder directly into stage of FLA file, aligned to
Publish to output folder for renaming
Today, for no apparent reason, I can no longer drag anything into the stage of any FLA file. Not just the pre-built templates. Nothing will drag & drop into an FLA stage.
What I have tried:
Restarted Mac
Reset Flash preferences
What I know I can still do:
Drag files from Finder into the Library, and drag into FLA stage from there
"File > Import to Stage..."
This works but because of my naming convention it prompts to import them all each time because Flash sees the sequence
This is not another step I am willing to contend with for my manual workflow
Me and my creative team need to process hundreds of assets like this each week, so I'm very anxious to discover why functionality that was working, suddenly stopped.
Running:
MacBookPro Retina OS X 10.8.5
Flash CS6 v. 12.0.2.529

just want to add my annoyance to the pile here. I can't see any logic behind removing the drag and drop function, especially when adding a new folder is now a multi-step process that is far from obvious. to start a new playlist with local folder content you now need to:enter settingsclick into advanced settings (basically all settings now seem to be "advanced"?)manually find and add the foldergo through the adventure of finding the files in your library.
-- because they may or may not be listed under "local files" - you won't know because Ctrl+F is also removed. so you have to remember/know what the album you added is called and search for that. if you have a mixed bag of file names from various albums, you're basically shafted; there's no way to find them all with a single search.then you can add them to playlisteta: but wait! there's more! if you have more than 15 files? you're **bleep** out of luck, because the search will only display the first 15 hits among your local files, and then show you spotify library tracks.I can't help but feel as though spotify is doing everything they can to stop us using spotify to listen to local files, as bugs that make it more or less impossible persist through multiple versions - and now features that seem to me to be basic functionality are being removed?mega minus points from someone who's been using spotify since 2008.

Do I have to plug my ipad mini directly into the mains for a reliable charge?

I've been having an issue with my new ipad mini not charging even when its plugged in using the mains adapter unless I plug it directly into the wall. This is a bit inconvienient as I don't have enough sockets and I like to use my ipad as a clock radio with TuneIn so when I wake up my battery is about 40% even though its been plugged in overnight.

This is unclear and confusing...
Lorraine Broadhurst wrote:
I've been having an issue with my new ipad mini not charging even when its plugged in using the mains adapter unless I plug it directly into the wall. ...
iPad Charging
"The fastest way to charge your iPad is with the included USB Power Adapter.
iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter.
When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge, but only when it's in sleep mode.
Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain."

Is there some way to import image files directly into an open document?

Is there some way of importing a series of image files, say jpegs, directly into an open document, rather than having to open all the image files and having to drag and drop each individual one into the open document? Specifically, I'm a dentist and I often get digital xray images emailed to me from other offices. But they come as 16 or 18 individual image files and I have to put them into a virtual "xray mount", so I can view them all at once, rather than having to open all the images and toggle among them. So I open a blank document in PS (CS4), then I navigate to the folder containing all the image files I received, select all of them and open them all. Back in PS, I now have to select each image tab and drag the image into the blank "mount" and close the image. That new image then becomes its own layer in the "mount" document. But I have to repeat this 18 times for each patient! I was thinking if there was a way to open the new "mount" document then select all the image files and somehow "import" all the image files directly into document - essentially "automate" the process - that'd save me BOATLOADS of time and aggravation! Anyone out there have any suggestions? Thanks alot!! Dr. G.

Thanks, Curt! When u say "animate" do u mean File | Automate...? Inside Automate, I can't find "Make Frames from Layers"...if you do mean "Animate" I can't find that menu. Zeno replied with a BRILLIANT clarification:
<<Yes, but after you've got all your images as layers in a new document you can simply Select->All Layers and then drag them all to your document in one fell swoop.>>
I tried that and it works like a charm! I select all 20 layers in the new document that "stacking" creates and just drag them all onto the virtual "mount" document. That's it! Then I just move each of these layers around as I would otherwise...it's just 1 click and 1 drag/drop. Unless someone comes up with a way to actually "import" all the images directly into the "mount" document, I think this appears to be the most efficient route to follow.
I really appreciate your guys' assistance! It's so great that you guys monitor the forum and help us out with our Photoshop problems! What an awesome program it is, right?
Thx again!
Leon

I need to capture directly into Imovie using EyeTV.

I can capture directly into EyeTV software no problem. I have an EyeTV 200 with a firewire connection. I can export from Eye TV into Imovie. I would like to remove a step and capture from my EyeTV directly into Imovie. Currently I get a message that says "No Camera Attached". Does anyone know a work around?

The EyeTV hardware/software mpg-2 compresses the content on capture. If you have the latest EyeTV software, the software will let you export the content in DV format for use in iMovie and iDVD which it appears you have been doing.
As for >>I would like to remove a step and capture from my EyeTV directly into Imovie.<< That can't be done.
F Shippey

How can I import bookmark HTML records directly into pre-defined (but empty) Folders?

Firefox is my default browser. I am in the process of replacing an old computer with a new one. I've converted into HTML files the Bookmark content of all of the Folders appearing within the Bookmarks section of Firefox on my old computer. I then uploaded this into the cloud, and downloaded it to my new computer. I've loaded Firefox afresh on the new computer. Now . . .
Ideally, I would like to be able to import these saved/HTML bookmarks (now on my new computer) directly into the new Firefox, keeping the Folder structure maintained in saving them from the old computer; less ideally, but still acceptable, would be to simply re-create as empty Folders each Folder from the old computer's Firefox setup and then do a 'Select All' copy/paste from each of these Folders as saved in my downloaded HTML bookmarks into these initially empty Folders created in the new computer's Firefox Bookmarks section. Is either of these currently possible? In short, this is a quite distinct scenario from importing bookmarks from other browsers on the same computer.
I have tried, but it seems that neither of these functions is currently viable. As common as replacing one computer with another is, I find this a pretty significant oversight which will require a very time consuming conversion process if such functions are not currently available; i.e., I'll have to open each saved HTML Folder and manually activate each individual html bookmark, go to that website, and individually re-bookmark each of these one by one within the Bookmarks section of Firefox on my new computer as if I were bookmarking this site for the very first time. With hundreds and hundreds of bookmarks segregated into about 30 Folders, I think you can see what a productivity drain this will be.
While there appear to be some quite interesting and potentially useful FireFox Addons - e.g., Categorize - none of these seems to address/resolve this problem. Can you advise? Thank you.

To start out with, Firefox hasn't used the HTML format for storing bookmarks for a few years now; you can still import and export bookmarks in HTML format, as you can with just about any other browser out there as an interchange format. Firefox 3.0+ versions use an SQLite database for storing bookmarks and browsing history in the place.sqlite file. Firefox 3.0+ versions do automatic backups of your bookmarks in the JSON format; that file includes "Tags" data but not the web site Favicon data. Restoring a backup from an old PC to the new PC is how Mozilla handles replacing an old computer - or you can "backup" the entire old Profile and transfer that data to the new PC manually. A user could also use Firefox Sync to "sync" their personal data onto the new PC. IMO, you're over-thinking this using dated information (talking about HTML files) without knowing about what options you currently have with Firefox and Mozilla.
Is that a genuine Netscape-1 bookmarks.html file? ''Look at the first line of code in that HTML file to see.'' <br />
Or is it a standard HTML file?
If you have a genuine bookmarks.html file, you can '''Import''' that file thru Organize Bookmarks > Import and Backup > Import HTML... > From an HTML file.
Doing it that way you will be appending the bookmarks & folders that are in the '''Bookmarks Menu''' folder right now. The ordering of the folders and bookmarks in the "imported" file is identical, the "imported" data is added below the existing data. That said, the '''''Bookmarks Toolbar''''' folder and the '''''Unsorted Bookmarks''''' folder from the "imported" data will be in the Bookmarks Menu folder at the bottom; you'll have to move the bookmarks that are in that folder to their respective folders, above and below the Bookmarks Menu folder.

RAW files open directly into Photoshop

Odd issue here: when launching RAW files they open directly into Photoshop. Either Camera Raw gets bypassed or it just processes them on the fly.
This happens after a bit of usage, re-launching Photoshop solves the problem for the next few files.
This happens if I launch the RAW files from the Finder, Bridge or Photomechanic. Only the right-click on my mouse in Bridge will show the option of opening images in Camera Raw.
This is driving us nuts here. Happens on 4 work stations.
RAW files are mostly CR2's. Mac OS 10.4.10

Are you using PhotoKit or PhotoKit Sharpener? If so, this is a known issue with the previous builds...go to the CS3 Beta page and redownload the current builds.
http://www.pixelgenius.com/CS3BETA.html
If you AREN'T usinf PhotoKit or Sharpener, try resetting your Bridge preferences and purging the cache.

I cant get a signal from my line in when I connect my guitar directly into the input jack

I have several electric guitars. I set the GarageBand (and system preference) settings to the "line-in input" in garage band and have plugged my guitar directly into my MacBook Pro using a regular guitar cable and a reducer to fit the laptop input. I have had no luck getting any sort of signal out of this. When I spoke with the guys at the Genius Bar they said I should be able to plug right in. I think I may need an amplifier or something because I don't think any juice is getting to my pickups. Is there something I am missing?

Your pickups don't need any "juice" to work, but still your signal might be too low for a decent recording. Apple keeps advertising that you could just plug your guitar into the computer, but it doesn't work for most people. Try to run your guitar through anything that amplifies it - a pre-amp, for example, or your stereo.

Export from FCP directly into DVD studio pro?

Is it possible to export from FCP directly into DVD studio pro? If not, what is the preferred file format because my exported quicktime files come up as "incompatible format" when I try to add them into my DVD project. Any help is appreciated.

You need to encode audio as well from Compressor. You'll have 2 files - audio and video.
Here's a tutorial:
http://www.youtube.com/watch?v=wFgJpd7DEWw
Message was edited by: Eric Pautsch1

How to extract data from info cube into an internal table using ABAP code

HI
Can Anyone plz suggest me
How to extract data from info cube into an internal table using ABAP code like BAPI's or function modules.
Thankx in advance
regds
AJAY

HI Dinesh,
Thankq for ur reply
but i ahve already tried to use the function module.
When I try to Use the function module RSDRI_INFOPOV_READ
I get an information message "ERROR GENERATION TEST FRAME".
can U plz tell me what could be the problem
Bye
AJAY

For some reason when I shut down my computer then turn it back on, it comes back directly into my account, bypassing having to enter a password to get into my account. This works in direct conflict with the parental controls I've got set up. Any ideas?

For some reason when I shut down my computer then turn it back on, it comes back directly into my account, bypassing having to enter a password to get into my account. This works in direct conflict with the parental controls I've got set up. Any ideas?

Thank you so much for the quick response to my question. I tested your directions and it works!! Thank you. I would never have figured that out. I knew I had to go into System Preferences but would not have guessed that I needed to have Automatic Login set to off.

Want to load an xml document directly into an Oracle table

From the Oracle XML Applications book pg: 106/107
there is an example where it inserts into a Oracle table from the xml_documents table. What I would like to do is insert directly from the xml document and was able to but not able to get rid of the inserting into xml_documents section.
CREATE OR REPLACE PROCEDURE insertXmlFile( dir VARCHAR2,
file VARCHAR2,
myTable varchar2,
name VARCHAR2 := NULL) IS
theBFile BFILE;
theCLob CLOB;
theDocName VARCHAR2(200) := NVL(name,file);
BEGIN
-- (1) Insert a new row into xml_documents with an empty CLOB, and
-- (2) Retrieve the empty CLOB into a variable with RETURNING..INTO
INSERT INTO xml_documents(XML_DOCUMENT_NM,XML_DOCUMENT_TX)
VALUES('DELETE ME',empty_clob())
RETURNING XML_DOCUMENT_TX INTO theCLob;
-- (3) Get a BFile handle to the external file
theBFile := BFileName(dir,file);
-- (4) Open the file
dbms_lob.fileOpen(theBFile);
-- (5) Copy the contents of the BFile into the empty CLOB
dbms_lob.loadFromFile(dest_lob => theCLob,
src_lob => theBFile,
amount => dbms_lob.getLength(theBFile));
-- (5a) Insert the rows into the proper table
insProc(theClob, myTable);
-- (6) Close the file and commit
dbms_lob.fileClose(theBFile);
delete from xml_documents
where xml_document_nm = 'DELETE ME';
COMMIT;
END;
execute insertXmlFile ('XMLFILES','emp.xml','emp')

Yes I would like to insert directly from an emp.xml file and load it directly into an emp table and not have to load the document in the xml_documents table and then insert into the emp table like I am doing in this procedure.

Extract R/3 Hierarchies Directly into BW

Similar Messages

Maybe you are looking for