Extract Satellite System Details from SOLMAN

Hi
We are using SOLMAN EHP 1. There are n no. of systems connected to our SOLMAN. We want to create inventory sheet of all satellite system. Requirement is we want to export System Details (Hostname,IP Address, System No) of all satellite systems to excel. We have checked in SMSY , but there is no download option. Is there any table or any other way to download such details.
Regards
Kapur

Hello Paul
Thanks for your prompt reply. I had seen this earlier, system no. , system id are coming there but message server column is missing when i view table SMSY_SYSTEM_SAP. i had seen checked Settings>format list>Choose Fields and found that message server is already selected but it is not coming when view table SMSY_SYSTEM_SAP.
Can you tell me how to correct it or any other way to collect this information.
Regards
Kapur

Similar Messages

Satellite system connection to Solman

Hello, SolMan experts!
I have a difficulty with satellite system connection to Solman 7.1. SP08.
The RFC works well, I made an entry in BCOS_CUST table and therefore the tickets from satellite ERP go to our Solman Service Desk.
The only problem is all the system data in such a message is missing because of lack of/incorrect system configuration in solman_setup --> managed systems and installed base (via ib_gen). I can not find a guide that I could easily follow (I have no BASIS knowledge, but I am requested to configure this connection and I have no BASIS expert in a Team).
I guess the configuration might not be that difficult. If you can think of any steps necessary, please share. I will be very grateful.
With best regards,
Katarzyna Klys

Hi Katarzyna,
Please check the following notes:
1623126 - Help -> Create Support Message: System data
1623297 - "Help" -> "Create Support Message": Incorrect system data
1145514 - Creating support message, message type
1133242 - Support message created with incorrect SAP status
Also check:
Application Incident Management:New features in SAP Solution Manager 7.1
http://scn.sap.com/docs/DOC-27645
And
http://wiki.sdn.sap.com/wiki/display/SAPITSM/Configuration+and+Administration+of+ITSM
Thanks
Vikram

Create user both in the satellite system and in solman

Hi
I wonder if I need to open all my user's that are in the satellite system (ECC) in the solution manager for the purpose of create support message or I can only create them as BP?
If I don't need to open them, What is the proper way to configure the RFC?
Best regard's
Lior Grinberg

Hi,
in a normal service desk scenario you do not neet to create users in Sol Man. You just create business partners. If you want the users to logon to Sol Man and edit a document then they also need a real user there (linked via BP - employee):
For creating messages from satellite system you usually maintain RFC destinations from Sol Man (SMSY) to the connected systems. Then you use the generated *_BACK destination in your satellite system and add it to table BCOS_CUST.
All these steps and many more are described in IMG in Solution Manager.
Regards

Business Object system monitoring from SOLMAN

Hi,
We have recently installed SAP Business Objcts in a seprate system and now we want to include this system in SOLMAN for early watch alerts.
can any one provide the document/setps on how to include our Business Object system in SOLMAN.
Thanks * Regards,
KVR.

Kasi
I could not find any BO specific talks about SolMan and EWA in particular
Did you already tried to add the system like a regular NW based system via SMSY? I guess you can use the regular procedure here
Nesimi

No IBase/Component transferred in SLFN from a satellite system to Solman

Dear all,
We have Solution Manager 4.0 with SPS18 with working ChaRM and Service desk.
I have the following problem : a support message (created from the menu   Help->Create Support Message in a satellite system) arrives to Solman, but the fields Ibase and Component are filled by zeros and are inactive so I canu2019t change them manually.
The question is: are these values transferred from the satellite system to SolMan or not?
I have debuged the program calling under Help->Create Support Message   and have not found such functionality.
From the other hand, all forum messages implicitely imply this.
Due to technical reasons I canu2019t use notif_create transaction, where there are Ibase and component fields.
   From the SolMan configuration side everything is OK:
System landscape is correct, Ibase and components are generated and active, they have the correct external names. The functionality of ChaRM that utilises Ibase and components is working well, so I donu2019t see any problems from this side. OSS 449330 (delete the record from BCOS_CUST table with the value u201CTST_CUSu201D in Application field ) is not the case.
Please advice.

Hi,
In this case, could you please kindly verify the points mentioned in this note has been verified ?
note #824640
Hope this helps.
Cheers
SH

Migrate config to Solar02 from Satellite Systems

Hi Gurus
I need to know if there is a way to bring in the config form the Satellite systems in to Solman Solar02. The Solaman system up till now has only been used to gererate the installtion keys and System Monitoring. I am busy with the process of setting up change management and service desk. However I have also been tasked with setting up the business blueprint. The original config was never setup in regards to the blueprint. Is the a way to bring this across to Solman or do i manually have to enter enter the business scenarios in Solar02.
Santosh

Hi,
Bringing configuration details from Satellite System to SOLMAN
This is one of the Myths about SOLMAN.
SOLMAN helps/guides/enables your to manage your project in a better/efficient manner.
You define your process, document them. Proceed to SOLAR02 to maintain your IMG with corresponding transactions.
Feel free to revert back.
--Ragu

Any standard RFC there to communicate between satellite system and Solman?

Hi Gurus,
Any standard RFC there to communicate between satellite system and Solman?
Thanks in advance.
Regs,
BBR.

following four RFCs are created so as to initiate the communication between the satellite system and the solman system
_READ, _TRUSTED, _BACK, _TMW
but, you have to Read the Links and the Notes too to understand their names and their meaning
http://help.sap.com/saphelp_sm310/helpdata/en/48/647e3ddf01910fe10000000a114084/content.htm
http://help.sap.com/saphelp_sm310/helpdata/en/b3/dd773dd1210968e10000000a114084/frameset.htm
http://www.slideshare.net/wlacaze/sap-solman-instguide-initial-customizing-presentation

How user trace the message created in Satellite System

HI All,
I'm using Servide Desk in my company. Just wondering how user can trace the progress of the message created where email notification is not configured.
Remember when user send/save the message, there's a message number created. Just wonder any center/ transaction code user can trace the progress and have a visible view on the message ON THE SATELLITE System, not in SOLMAN.
Thanks,
NIcholas Chang

>
Nicholas Chang wrote:
> Hi All,
>
> What standard F4 help screen should i modify and from where should i start? Could you please enlighten me on what function or program that this F4 help screen bind to? I need to know the function/program in order for my abaper to work on this.
>
> Also, i just wondering is every user able to create message in Satellite System under Help -> Create Message? According to the SOLMAN Security Guide, it mention user with role SAP_SUPPDESK_CREATE are able to create message but i've and created and tested with a restricted profile user without SAP_SUPPDESK_CREATE role, and it still manage to create message.
>
> I've completed the SOLMAN SD setup and currently tryin to fine tune it.
>
> Your help is very much appreciated.
>
> Thanks!
> Nicholas
Hi Nicholas
If you are using a "Named" user instead of the Trusted Relationship in the RFC maintained in BCOS_CUST for entry OSS_MSG then this is quite possible. In this case the "Named" user will be used to call the interface to create message and the calling user ie the end user creating the ticket will only be used as "Reporter" of the message.
Regards
Amit

Trusted systems gone after Solman hardware migration

Hi All,
I migrated our Solman EHP1 to a new x64 box via homogeneous system copy, everything went absolutely fine but one thing... Solman is not trusted any longer in any of the systems. The host/IP is the same and RFC's in SM59 all look good... I wondered if theres any way to regenerate the trusted/trusting RFC's without affecting the rest of the configuration in SMSY.
Also, checked and the satellite systems still and Solman still trust them but not the other way around
Regerads
Juan

Hi Juan,
I came across issue some times back and got Note 128447 - Trusted/trusting systems
This refrence i got from some other note which was referring the post installation activities(System copy) and was suggesting to re-estabilishing trusting/trusted system relationship.
May be worth to read this note
Regards,

Error while creating a support message in satellite system

Hi,
I am facing an error while sending a support message to solman form the satellite system
(( Error Description : Error in Local Message System: Error when opening
an RFC connection Message was Not Created ))
1) I gone through various threads and set the required authorizations like
SAP_SUPPDESK_CREATE and
SAP_SV_FDB_NOTIF_BC_ADMIN ,
SAP_SUPPDESK_ADMIN
for the user in the solman .
2) I checked the RFC connection and it is working fine.
Anyone pls help me to resolve this issue

hi rohit,
thanks for u r immmediate response
do i have to assign the roles to the user in the satellite system or the solman.
some roles in those 4 roles are not in the satellite system.
thanks
Rahul

Get Logical system name from Message type

Hi
I need to call Transaction BD93 for which I need Logical system. I have created a Custom basic type for CLFMAS02.
Now I need to find out in thhe program which logical system is configured for the custoem basic type say 'ZCLFMAS02'.
Is ther any Function module or Logic to get Logical system details from Basic type.?

Hi Gautam,
Check with the tables EDP13 and EDP21, the outbound and inbound parameters tables respectively, where you can key-in the message type, basic type and get the corresponding logical systems.
~ Bineah

Blocking of Direct Login to Satellite System

Dear All,
A person who has login authorisation in Solman also has login authorisation in Satellite systems. So a person can directly login to the satellite system, bypassing the Solman. whether is there any possibility to block the person directly loging in to satellite system.
Thanks and Regards
Saravanan

Hi,
When we create RFC destinations for remote system we have to provide the user credentials and saved it or making it a trusted rfc connection without providing any login credentials.
Depending upon the RFC you create you get all the access in the satellite systems.
ALso go thru this tutor
https://websmp204.sap-ag.de/~sapidb/011000358700002912202006E.sim
This shows how to create rfc and whether you want trusted or with user logon screen.in user logon it always asks for the credentials whereas in other case it get automatically filled up.
Please reward points if it helps.
Message was edited by:
Prakhar Saxena

/BDL/TASK_PROCESSOR not getting triggered in satellite system from Solman

Hi,
We have scheduled EWA report in Solution Manager for one of the satellite system.
Solution Manager has sudddenly stopped creating of job /BDL/TASK_PROCESSOR0000002218 (ie job which is created immediately as EWA is scheduled in Solution Manager)
/BDL/TASK_PROCESSOR is running correctly and on hourly basis in satellite.
The EWA report is getting generated in Solution Manager after long time and without job /BDL/TASK_PROCESSOR0000002218 (is sessin specific job) being triggered.
Kindly help.
Regards,
Trupti M

Hi Paul,
My problem is solved.
Actually the Task: EarlyWatch Alert for Solution Manager under 'To Do' view of sdccn of satellite system was somehow getting scheduled as Back dated(ie instead of 30.04.2020 it was getting scheduled at 28.04.2010)
Due to this when we would do 'Start now' for the Task 'EarlyWatch Alert for Solution Manage' it was not getting triggered.
So I manually did refresh session which was mentioned under steps for manully sending data to SolMan under solution_mamanger tcode.
Due to this job BDL/TASK_PROCESSOR0000002237 got created.After this job got completed Task ''EarlyWatch Alert for Solution Manager ' got automatically generated.
I back dated the date for Task ''EarlyWatch Alert for Solution Manager" and started it.
Due to this the job /BDL/TASK_PROCESSOR0000002238 got created in satellite system for sending data to SolMan (This was not happening earlier.)
Extract from Solution_Manager tcode when scheduling:
When the Session Refresh task has been processed, a new task with the appropriate session type and session number appears in the To do view. This task collects and sends the data for your session. If a new task does not appear, search in the task-specific log for errors that ocurred during the Session Refresh task and make any necessary corrections.
To start the task immediately, select it and right-click to call up the context menu.
Choose Start Now. When the task has been processed successfully, it appears in the Done view. The data has been sent to your SAP Solution Manager system. You can check this in the task-specific log.
Thanks for all your help. Hoping my post will also be helpful for others.
Regards,
Trupti M

Creating Support Messages from Satellite System without SolMan user account

Hi
We are having some problems with users "creating support message" from our ECC system to SolMan, if the user does not have a user account in Solution Manager.
It is not correct, that users from Satellite systems can create support messages from these systems, without the user having an account in Solution Manager? And that the user is identified by the business partner for the user, that must exist in the Solution Manager system ?
We have set up the RFC for the supportmessages between SolMan and the ECC system as trusted RFC, with the "Current user" as the user, but how should this be set up, if the user does not have an account in the Solution Manager system. If we enter a user with the right authorizations in the RFC, will the messages that come through not just appear as created by that user, instead of the ECC user and corresponding business partner ?
Regards
Lars

Hi,
you can use the use the user for the RFC-Connection in that case. I have customizied a similar scenario. In my scenario the System from which the message was created, is the business partner (SOLD-TO-PARTY). For that you have to create a communication user (i.e SOLMAN<SYSID>). In TA SM59 in the satellite-system you assign this user for the connection. (Don't forget to assign the user to the role "SAP_SV_FDB_NOTIF_BC_ADMIN"). Now, it schould be possible to create messages from the satellite system to the solution manager. Additionally you should create business-partner for each user of the satellite system, by using TA DSWP>EDIT>CREATE BUSINESS PARTNER.
With this TA, it is easy to create BP for each satellite system.
Best regards
Marc

Checking system connected to SOLMAN or Not from Satellite system

Hi ,
How to check system connected to SOLMAN or Not from Satellite system.
thanks in advance..
Rgds,
BBR.

All connections via SM and satellite system are view RFCs.
In SM, you will have 3-4 RFCs trusted/read/ etc pointing to satellite sm.
in satellite, you will have one RFC to SM called back RFC generally with name - Solution Manager created during SMSY configuration in SM.
Do a test for Connection/Authorization etc for all the RFC's which if fine then the connection is good..
Regards,
SS.

Extract Satellite System Details from SOLMAN

Similar Messages

Maybe you are looking for