Extract single colour plane in real-time video

I have used Extract Single Colour Plane VI to process a running video as shown below:
However the video freezes whenever I activate this case structure. Is there any way I can perform the single colour plane processing while the video is running?
Attachments:
Extract Single Colour Plane.png ‏9 KB

The function "Extract Single Colour Pane" is not the reason why your video freezes. Even with an large image it just takes about 20ms (of course this is system dependent too) which would still enable you to play your video with rates of about 50 frames per second.
However, when "activating" this case structure your VI jumps into a untimed while loop and does the colour pane extraction for the same image as long as you "deactivate" the loop.
You should reconsider your architecture!
Christian

Similar Messages

Real time video editing, is possible?

Hi to all, first of all thanks for reading this post.
I would want to know if it`s possible to apply some effects (mostly twixtor, some warp stabilizer, color correction) and see the result (maybe at lower resolution, 1/2,1/4 resolution) without rendering, but fluid (to verify the image goes accordingly with the audio, to see the speed change is adecuate with twixtor, etc...)
I have a laptop that is supposed to be powerful: i7-4800mq, 16 GB of RAM, GTX765M, and (maybe it´s the reason I don´t see the expected result) a 7200rpm hard disk (SATA 3GB/s, with 64 GB SSD catching mSATA)
I use video primarily recorded from a gopro 3 black, and use premiere pro cs6, after effects. 1080, 60 fps.
I want to change my computer because I have to do a lot of editing of short videos, lot of twixtor, and can´t wait to renderize every time I change something and the bar goes from green/yellow to red.
I would want to know:
-if this is normal, with my computer
-If you where to going to buy a computer, instead of asking which component you should buy (of course you can), what do you think about these two:
option 1:
i7-4790K 4.0Ghz
MSI GeForce GTX 980 Twin Frozr V OC 4GB GDDR5
Motherboard: MSI Z97 Gaming 9 ACK
Hard disk:
Seagate Barracuda 7200.14 3TB SATA3 64MB
Samsung 840 Evo SSD Series 500GB SATA3 (250GB x2 in raid 0)
Kingston HyperX Savage DDR3 2400 PC3-19200 16GB 2x8GB CL11
price: around 2100 euro
option 2:
i7 4790K
2x GTX760 2GB GDDR5
Motherboard: GA-Z97X-SLI
Hard disk:
- 2x HDD 1TB 7200rpm Seagate ST1000DM003
- 2x SSD 120GB Kingston V300
16GB DDR3 1600MHz (2x8GB) HyperX Fury Blue Series HX316C10FK2/16
price: around 1600 euro
I know I can use proxyes but I think proxyes with less resolution give problems with warp stabilizer and with less fps give problems with twixtor.
Do you think I will be capable to do real time video editing with these computers? Thank you very much!

....read about your laptop....the good, the bad, and the ugly.
...ugly first : you are right ...16 GB is the max memory that can go in your machine.....I believe that will hamper performance with some heavy timelines,but, not sure. My laptop could take 32GB, but, 2 of the 4 slots are inaccessible, so I wound up with 24GB. I have seen the memory usage swing up to 20GB during certain tasks,but, not most of the time.
...good : your CPU and GPU are FINE.....even BETTER when you over clock the GPU "memory clock" with the free "MSI Afterburner " utility...I go "plus 903 Mhz"
...the BAD : its NOT hopeless, however. Your CURRENT storage configuration is a DISASTER !!!....a definite bottleneck which will cause huge problems with Premiere Pro. The GOOD news is that it can be EASILY fixed. RIGHT NOW, you have a single 7200 rpm HDD with EVERYTHING on it and a SMALL mSATA SSD acting as a "Cache" for the hard drive, to help speed it up. That is effectively having just ONE drive, and that is below spec for PPro, which needs TWO separate drives as a minimum....( with the now way higher speeds of SSDs, some argue 2 drives are NOT really needed, if ONE is fast enough....but, thats not altogether true).
Easy solution : replace the current mSATA 64 GB SSD with a crucial M550 mSATA SSD, ( ONLY Samsung Pros or Crucial M550s are recommended for use in machines doing video editing...there are reasons for this.....the 550s are WAY cheaper and only SLIGHTLY behind in performance.....hardly noticeable. ( $150 for 256GB, $250 for 512GB at B and H )
If you have the Windows disk, you can do a fresh Windows install on the new, fast SSD. If no disk, just CLONE your existing HDD "image" onto the new SSD...( provided it will FIT !! ) . Now the new mSATA will be your FAST boot drive !!!.....reading and writing at over 500MB/sec instead of the SLOW HDD running at 120MB down to 60 MB/sec with all the LATENCY and FILL degradation !! On this mSATA, you would have OS,programs, and Windows page file ONLY....( although if you get the 512GB SSD, you can experiment using the extra space for all cache files, previews, and exports).
NEXT.....take out the 7200rpm drive...replace it with another 2.5 inch Crucial M550 SSD !!!.....go all the way up to 1TB if you want !!, ( $450), or, at least 512GB. Place ALL other files here
Using these two new SSDs will MASSIVELY improve your performance with PPro......but WAIT !!!.......THERE'S MORE !!!
You have OTHER storage options as well. If you really want to go nuts, you can REMOVE the DVD drive, and use THAT SATA port for a THIRD SSD drive. I have read where someone used an M.2 drive as the boot drive,then created a RAID 0 with the now TWO 2.5" SSDs in the machine....( your BIOS allows it,I think) That would give you a huge "D" drive volume running at OVER 1GB/sec. for serving up all your media. project files and all else. There are plenty of "how to" videos for YOUR machine on youtube, as well as forums like "notebook review" where owner's describe upgrades they've done.
Finally, you have a "mini-display port " AND a HDMI 1.4 socket. On MY laptop , I have the EXACT same mini-display port connector, but, it is called "Thunderbolt". I have read that with THIS connector, "Thunderbolt" and "mini-display port" are INTERCHANGEABLE !!! What it REALLY is , is a high speed data connection that is FULL-DUPLEX, ( UNLIKE SATA which cannot write while reading and vice-versa). Your version is probably 1.1...like mine. The newer 1.2 displayport connection can handle 4K . The 1.1 speed is actually about 8Gbits/sec, ( or, 1 GB per second BOTH WAYS). This means it MAY be possible to connect a high speed thunderbolt storage device to that port....I am NOT sure....but I think you CAN because the HDMI 1.4 port handles my 2560x1440p IPS monitor at full resolution...yours should ,too. However, the mini-display port may be configured for video screens only without a "Thunderbolt" driver....I am not sure. Thunderbolt storage is expensive and not well developed yet.
You may ALSO us the USB 3 external port to get a decent speed for external storage. What I do is use a cheap $30 USB3 dock, that has both 2.5" and 3.5" slots in it. THEN, you can plug SSDs,or,HDDs in to it....changing them like "cartridges"....you will get up to 220MB/sec using SSDs in that, and normal 100-120MB/sec with a 7200rpm HDD.Its great for putting previews, cache files on....those are all easily recreated by premiere if ever lost or erased.
So, SPEED up your storage configuration and you should be greatly improved. I found an AWESOME 27" IPS monitor on sale for only $299 that has the WQHD 2560x1440p resolution that would be KILLER hooked up to your laptop, which would EASILY drive it. The pixel density is AMAZING......1440p videos look like 4k on it !!...that's ANOTHER option you have.

WVC80N real-time video streaming to TV

I am very happy with WVC80N camera. It is a great product! Just one thing I'm yet to figure out: Is there a way to view the real-time video feed from the camera directly on a TV? Or, through XBOX? (I don't want to hookup the computer to theTV)

Well the scenario that you explained, technically it is possible but it is not tested. Just it requires proper add-ons for the browser used in the T.V. Or in Xbox. It has the ability to view live video on your cell phones.The image isn’t amazing, but you can no doubt see whats going on. It’s all that much better with a bigger screen and makes watching over your home or office super quick and easy.

Report unavailable 4 multiProvider with 2 Plan allowed real-time icube?

Dear all,
It seems that the multiprovide with 2 plan allowed real-time infocube can not generates report correctly. Is that right? Or I'm missing defining some configurations? Any sugguestions are appreciated.
best regards,
Gerald

Hi,
It will generate report properly. U might missed something.
Thanks
Debasish

Streaming Real time video...

Hi,
I'm now doing a project that requires me to stream real time video onto the web.. is this possible? Is there any simple solutions around.. or is there any web site where I can look for these informations?
Thanks
Justin

Justin,
You will find your answer here:
http://java.sun.com/products/java-media/jmf/2.1.1/solutions/index.html
This should definetly help you out
Josh
Good Luck
p.s. have you used multicasting before?

I need to show how colour separations work by gradually combining four single-coloured clips in the time line?

Hi, I need to demonstrate how colour separations work in the printing process, by animating the additions of each single colour plate to the overall picture. I have four jpegs, one of each colour, plus black, and I want to animate each one on the timeline to simulate the addition of each colour to the printed page. How can I do this? Thanks in advance. Phil

Video and print do not work in the same way. Video uses additive color, print uses a subtractive method.
You will have to fake it. Choosing a simple dissolve and combine method, you would also need the interim stages, say a Cyan + Yellow plate and a Cyan + Yellow + Magenta plate, eventually dissolving into the full color version.
Another way: Have each of the 4 plates appear one after the other on a quad split screen. Allowing time for an explanatory narrative, simultaneously have the 4 plates grow to full screen and move into position. At this point, you can quickly fade to a full color plate.

How can I extract the data from a Real-time Execution Trace ".log" file?

I would like to get the data for the traces from the Real-time Execution Trace toolkit ".log" file to read in Excel and generate a report.

Hi Chuck,
Have you tried reading it into a text or binary file first and then generating a report using the Report Generation VIs?
Ipshita C.
National Instruments
Applications Engineer

IPad & iPhone share real time video?

Sort of the title says it all. I'm trying to make video with the new iPad's rear camera but I can't really aim at myself. I have iPhone4 so I kind of got thinking if there's any way to share what my iPad sees with my iPhone. Are there any solution for this? Thanks!

Thanks Jonathan for the idea
Sure. Mirror would definitely work if I'm standing at the reach of the mirror & my iPad. But sometimes I can't have the space to setup the mirror behind the iPad and see the whole screen. I'm hoping someone has more effective solution than a mirror.

NI-DAQmx 7.4 Changes for LabVIEW Real-Time

Hello LabVIEW Real-Time and DAQmx users,
National Instruments has recently released NI-DAQmx 7.4. Changes introduced in NI-DAQmx 7.4 provide increased flexibility when performing hardware-timed single-point operations on real-time platforms. The Developer Zone Tutorial: DAQmx Hardware-Timed Single Point Lateness Checking has been created to help explain these changes. Information is also available in the NI-DAQmx Help.
In order to provide these changes in NI-DAQmx 7.4, the behavior of 'DAQmx Is Read or Write Late.vi', used in previous versions, had to be changed. In NI-DAQmx 7.4, the 'DAQmx Is Read or Write Late.vi' has been obsoleted and no longer performs any lateness checking. Applications being upgraded to NI-DAQmx 7.4 are recommended to use one of the lateness checking options discussed in the above tutorial.
Regards,
JR Andrews
NI

Hello,
I changed the program and added a case structure to configure each channel according their type. In order to go through all the channels in the configuration file, I put a for structure.
It seems it is working, however, when I start acquisition, I only see one channel and that is last one which is configure.
Here is the original file, configures all, but only works for AI Voltage:
Here is the modified one:
What I am doing wrong?
Thanks!
Attachments:
ConfigureFor Channels.PNG ‏131 KB

Transfering real time camera images threw socket

hi,
i have a digital camera and i want to transfer its real time video threw sockets,can someone pls can tell me how its done.
how can i take the video from the camera and send it threw the sockts?
thx.

go through Java Media Framework

Simulate real time recording...

Hi,
I know with CP we can do real time video mode recording, but is there a good way of simulating a video demo?
For example, I may have a dynamically changing list of names etc when I am scrolling though the phonebook of a particular application,
I type a W, then a filter on the phonebook will start searching for names beginning with W and so on, so using still shots, is there a way to simulate that without using video demo mode??
Any ideas?
And have I explained this clear enough?
Cheers
Rossco

You are probably looking for Full Motion Recording solution here. We have many such scenarios and I haven't seen FMR working in these cases (It works most consistently when we drag and drop an object from one part of the screen to another).
To simulate this, we record the real-time search results by pressing "Print Screen" on our keyboard.(basically force capture the screenshot).
Sreekanth

Video Output for PXI Embedded Real-Time Controller ?

I plan to purchase a PXI Embedded Real-Time Controller for security monitoring.
Is it possible to use the video output of a PXI Controller running RTOS to display messages from a LabVIEW RT application ? According to the documentation, it seems that the use of the video output is only possible for PXI Controllers running Windows XP.
Does it exist a specific application to do this with LabVIEW RT ?
Thanx.
H.L.
Solved!
Go to Solution.

Hi Yann,
The situation seems a bit confusing as in the link you've given above using the local monitor from a pxi labview rt system as the HMI without a pc attached, two messages (here and here) say that it is possible to display an image on the video output of a PXI RT controller using a function of the NI-IMAQ librarey (namely, the IMAQ RT Video Out VI) !
I have the NI-IMAQ library but no PXI controller to test if this solution should work or not
Does anyone have the answer ?
Thanx,
H.L.

Real time effex in iLife 6 slow my video down not bad but some what slow.

Real time effex in iLife 6 slow my video down not bad but some what slow. When I go to try out different effects it makes my prevue slow as I am looking at it in real time seeing what the effect looked like. I am using a i Mac G5 250gb and 1g of ram. Is there something rong are is this the way the i Mac G5 works with video thanks.

Be sure you're using the latest drivers for your Decklink...
If you didn't perform a totally clean install of the studio 2 when you got it, that might help. It's always been my habit to rebuild my startup disk any time a new OS comes out (i.e. Panther to Tiger) and when a new studio is released... I just have a very stable system as are the ones I watch after. I'm totally convinced this needs to be done periodically. At the school I teach at part time, there are about 65 FCP bays. They do this totally clean install every single semester. I'm convinced that this is the reason they are so stable in general, even being used by many user accounts etc...and by novice users to boot.
Also keep in mind that as drives get fuller, they get slower... so need to keep at least 10% free... they actually start slowing down at 70% capacity. As a side note, CalDigit's new HD PRO unit is stripped in such a manner that it doesn't slow down as it fills up... Apparently they stripe it so that every other drive is using the fastest part of the platters and the others start by using the slowest part of the platters or some such...
Jerry

Report showing planned vs. real production times

Hi,
I am using APO 7.03 and try to find out if there is a possibility of comparing the planned vs. real production times. we need to compare the planned times maintained in operations of the routings with the real production times coming from the confirmations of production orders. Is there any report, etc. in APO PPDS or in SAP PP where we could see that?
thanks in advance for all input!
br,
Wojciech

Hi,
As far as i know, there are not exact report that will fulfill your requirement. However i would suggest you some Standard SAP reports where you can get data.
1) MCPH - Report for work centre Analysis
2) MCRW - Report for resourse analysis
3) COID - Which will give you,
a) Capacity to be confirmed
b) Actual Confirmation.
IN above mentioned report you have to choose key filed to be selected.
Further more,
For planned data,
1) go to table - AFVV, Input Routing No.
Output - VGW03, VGW04 i.e. your planned time for operation
For actual Data,
1) go to table AFRU input Routing ni. or Process Order
Output: Actual phase confirmations.
Revert if you found info useful.

How often in the real time projects extract data from flat files n process

I am going thru teh BODS data integrator, and trying to understand the demand of ETL services extract data from a flat file, is that really impt in teh real time jobs.
Thank you very much for the helpful info.

Hi,
As per the inputs given by you guys i started loading data from flat file.
I try to load 28 files from i which i was able to load 24 files succesfully.For the other 4 i got this error messages
1) Error 'Enter period in the format __.YYYY...' at conversion exit CONVERSION_EXIT_PERI6_INPUT (field CALMONTH record 1, value DUMYTRA)
Message no. RSDS012
2) a) Error 'The argument '1,008.00' cannot be interpreted as anumber' on assignment field QUANT_B record 11714 value 1,008.00
Message no. RSDS013
b) Error 'The argument '1,110.00' cannot be interpreted as anumber' on assignment field QUANT_B record 15374 value 1,110.00
Message no. RSDS013
3) a) Error 'The argument '1,140.00' cannot be interpreted as anumber' on assignment field QUANT_B record 1647 value 1,140.00
Message no. RSDS013
b) Error 'The argument '2,028.00' cannot be interpreted as anumber' on assignment field QUANT_B record 4625 value 2,028.00
Message no. RSDS013
4) Error 'The argument '1,151.00' cannot be interpreted as anumber' on assignment field QUANT_B record 7808 value 1,151.00
Message no. RSDS013
I'am unable to trace out what is the error exactly.
I checked this values in files they are perfect.
can anybody please guide me on this issue.
With Regards,
Pradeep.B

Extract single colour plane in real-time video

Similar Messages

Maybe you are looking for