Extract Stopped for the Device

hi guys
how do I configure the Doe for stop this message ?
Extract Stopped for the Device. Days not synced exceeds configured thresholdEnable Extract
I found these configurations.
Configure Maximum Level Values to Stop Extract for Receivers
Maximum Threshold for Queue Size (bytes): 
Maximum Threshold for Days not synced:
Guys , can we explain me details about :
Statistics Configuration
System Status Configuration
Thaks
Edited by: esoliveira on Jul 16, 2011 7:50 PM

Hi,
best and most complete explanation you should find here:
http://help.sap.com/saphelp_nwmobile71/helpdata/en/25/f091424bee7073e10000000a155106/frameset.htm
Regards,
Oliver

Similar Messages

  • My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer.  The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that.  Anyone know how to fix this?

    My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer.  The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that.  Anyone know how to fix this?

    Hello there philp_69,
    If I understand correctly it sounds like your phone hasnt been recognized in iTunes on your PC since the last couple of updates. I would use the troubleshooting in the following article which will walk you through the steps one by one. 
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • How do I do this to use OVerdrive media on deviceThe Apple device must be formatted for use with Microsoft Windows.  The iTunes setting 'Manually manage music-' must be enabled for the device before you can complete the transfer.

    I cannot make these directions work
    I downloaded media on Overdrive MEdia on my PC
    I have the overdrive media ap on my I pod touch 4g
    this media is suppossed to be compatible w/I pd touch
    Notes on Transferring OverDrive MP3 Audiobooks…
    Most MP3 capable devices should play OverDrive MP3 Audiobooks.
    If you intend to transfer OverDrive MP3 Audiobooks to an Apple® device, note the following…
    iTunes® v9.0.2 (or newer) is required.
    The Apple device must be formatted for use with Microsoft® Windows®.
    The iTunes setting 'Manually manage music…' must be enabled for the device before you can complete the transfer. Adjust this setting in iTunes as follows…
    Connect the iPod® to your computer.
    If it does not launch automatically, open iTunes v9.0.2 (or newer).
    In iTunes, locate the device in the left vertical navigation panel (under heading 'DEVICES'), and click the device.
    The 'Summary' screen is displayed. 
    Place a checkmark next to 'Manually manage music…'.
    Click the 'Apply' button.
    The iTunes 'Summary' screen refreshes, and the changes are saved.
    If desired, close iTunes.
    Note that if an Apple device is connected to your computer, you can choose to simultaneously transfer a title to the iTunes Library and the Apple device. If you wish to only transfer a title to the iTunes Library, you must first disconnect the Apple device

    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
    Also you said " I want to add them to my iCloud, and also back to my computer.   " Note that unless  subscribe to iTunes match, only iTunes purchases are stored in iCloud.
    Also,
    You can redownload most iTunes purchases by:
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Luxadm probe / Could not find the loop address for  the device at physical path

    Using EMC FibreChannel Disks on a Solaris 10
    # luxadm probe
    No Network Array enclosures found in /dev/es
    Error: Could not find the loop address for the device at physical path.
    # echo $?
    255
    Any ideas how to fix?
    Thank,
    Marcel

    Hi Marcel,
    Which Solaris 10 release is this?
    I found a very old bug that says this problem is already fixed in Solaris 10 although the bug description says
    its mostly seen on Solaris 8 and 9.
    https://bug.oraclecorp.com/pls/bug/webbug_print.showbug?c_rptno=15123550
    The bug says that these errors are displayed when StorADE 2.1 is running its rasagent cron job, which executes a luxadm display. 
    This process runs in the background so the user is not aware that another luxadm display process is running.
    Work-around: Do not run Storade rasagent cron job at same time as another luxadm display process.
    I hope this might help to debug this problem but I puzzled why this might be happening if its already fixed.
    Let me know if the workaround helps or so I can follow-up with the right support team.
    Thanks, Cindy

  • TS4006 I have iPhone 4 with updated latest iOS And i am using FIND IPHONE application. But everytime when ever i login in it and serch for the device its shows but never give me the location"NO LOCATION AVAILABLE".It is already connected with WIFI but no

    I have iPhone 4 with updated latest iOS And i am using FIND IPHONE application. But everytime when ever i login in it and serch for the device its shows the device  but never give me the location"NO LOCATION AVAILABLE".It is already connected with WIFI and i tried all the stuffs that has been written in the manual. Plese give me the Proper suggetion about this issue..!!

    If your router is not identified in a national database (don't recall who maintains it or where it is) then there is no location associated with it.  Hence your device cannot be located.  I suggest you try your test at some public wifi spot, like a bookstore or coffee shop.  These places usually have a location associated with their wifi router.

  • E72 - The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001

    I have a problem with my ThinkCentre E72 (Windows 8).
    Suddenly, it shuts down with "shut-down" screen. Later, in my Event Viewer, I found the following System Warning:
    "The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001" where the source of problem is Kernel-PnP.
    Only thing that is plugged in my computer is mouse, keyboard and monitor.
    Many thanks,
    Matija

    Hi,
    PNP0A0A is not a default pnp ID, you need go to the manufacturer websites to find the ACPI driver, download and install it.
    Alex Zhao
    TechNet Community Support

  • HT1212 hi sir i forget my password?for the device  but now  i know the paasword please help me one chance only

    hi sir i forget my password?for the device  but now  i know the paasword please help me one chance only

    hi sir i forget my password?for the device  but now  i know the paasword please help me one chance only

  • How do I find the activation code for the device

    how do I find the activation code for the device for use with netflix

    there isnt an application code for netflix, you enter your email adress and passowrd and it activates netflix automatically. hope this helps

  • HT1414 forgot iphone 4 passcode  and I cant restore when connected to my computer. I get a message that says cant restore until I turn off find my iphone for the device, but I did go into icloud and erased the device. help plz!

    I forgot iphone 4 passcode  and I cant restore when connected to my computer. I get a message that says cant restore until I turn off find my iphone for the device, but I did go into icloud and erased the device. help plz!

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

  • Will Verizon offer any thing to iPhone 4 users since Apple will stop releasing update and support for the device?

    Apple recent stated they will no longer offer any support for the iPhone 4, no more updates, apps will stop working with the advancement of software updates. over all by the end of the year the phone will be almost completely phased out. Does Verizon have any type of plan for their current iphone 4 device users?

    Verizon has nothing to do with Apple updates.
    It is much like Microsoft who phased out support updates to Win 31, Windows 95,98,ME and now Windows XP.
    You must deal with Apple http://www.apple.com/support
    Good Luck

  • Message no. R3009 - error in extraction program for the DSO

    Dear All,
    I get the following error, when I execute the data source object, when I select monitor button in the window the process is in Red.  So I couldn't get the report at the ODS.  Please help me to clear the following error :
    The extraction program does not support object ZSHIPTRACKND
    Message no. R3009
    Diagnosis
    The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject ZSHIPTRACKND.
    System Response
    The data extraction is terminated.
    Procedure
    Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
    with Regards,
    Jerald

    What release are you at?
    Have you searched SAP Notes and the SDN forums for this. A quick search indicates 9 SAP Notes and 15 SDN posts regarding this error message. Unless we know what release level you are at we are unable to offer viable solutions.

  • How to write program for the long text in EMIGALL for the DEVICE LOCATION.

    Hi,
    I am pretty new to this ISU field and i have been asked to code for a Long Text in EMIGALL for DEVICE LOCATION,
    so i would like someone can help me with it.
    thanks in advance.
    Robert.

    Robert,
    You can find most of the answers to your questions in the Guidelines:
    Chapter 2.4.2 describes how to configure the field rule Fixed Value.
    Chapter 2.4.5 describes how to configure the field rule via KSM.
    Chapter 2.5 descibes the Key- and Status Management and the usage of the the KSM in field rules.
    The specific answer to your questions are:
    (1) ...When i was adding the fixed rule, it was asking for domain so what should be the Domain that i should add ... You may ignore the domain field when creating a fixed value object. It's more for information purposes.
    (2) ... and what should i keep the fixed value, string or filed or abap rule ... I'd suggest to use 'String' and enter the specific value in the field 'FV contents'.
    (3) ... Finally you need to adjust the RETURN-FIELD of the newly created BAPI migration object to AUTO-X_HEAD-TDNAME, where do i make this adjustment can you specify that ... The return field can only be adjusted int the migration object maintenance screen (MigObject -> Change). Please see chapter 3.1 for more details on the 'return field' and figure 3-8 in chapter 3.4.2 how to generate a BAPI migration object.  
    (4) ... Well i would also like to ask about the x_head-tdname =  via KSM (e.g. DEVLOC), where should i put the value ... You wanted to know how to migrate a long text of a device location migration object DEVLOC). According to chapter Chapter 2.4.5 you need to enter the name of the superior migration object (here DEVLOC) in the 'MigObject1'field on the 'via KSM' sub-screen on the field maintenance screen.
    (5) ... and what exactly would it be can i put DEVLOC in the ID of technical Object and where should i put this value... I am not sure I understand your question. In the end you will need to pass the number (ID) of the technical object in the TDNAME field. Either you put the id into the import file (only if you know the id) or you need to use the 'via KSM' field rule to replace the legacy system key of the device location by the SAP key by the load report and prior to passing the auto data to the application thus your new function module.
    Kind regards,
    Fritz

  • CoreServices.framework for the device profile

    I am trying to recompile my project to deploy it to the device ( first time).
    However CoreServices.framework is showing in red, and my project does not compile, complaining about: #error "Unknown architecture." in FixMath.h . Is there a different name for this framework when using the device?
    Thanks

    I took a look at the iFactr plugin when it became available in Dec 2014. My advice - don't bother. Put simply all it does is update the VS2013 targets to make it possible to build a CF project, and allows it to open a CF project. You don't get any designer support at all, so you'll still need to use VS2008 for building your UI, unless you're extremely brave and decide to do it entirely through code. I also found that it took quite a few hoops to jump through just to get it building my projects without issues, whereas they built flawlessly in VS2008. 

  • Forgot my password for the device how do i get in

    i can not remember the password to get into my device. Ipod touch 1st Gen.

    Connect the iPod to its syncing computer and restore via iTunes. It iTunes asks for the passcode and yu can't enter the passcode or if you do not have the syncing computer, place the iPod in recovery mode and then restore. For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • FM/BAPI to update the rate category for the device/installation

    Hi,
    I need to update a new rate category for a device.
    Please let me know if there is BAPI/FM which will update the rate category for a device.
    Regards
    Shiva

    Hi Shiva,
    First of all, can you clarify if you want to update the rate category - Is it at the Installation Level or at the Device Level.
    For updating the rate category at the installation level, go to Business object INSTLN,and then make the necessary changes in Change Installation without dioalog.Pass the input parameters as required for the Method.
    If you find this answer helpful, please reward points.
    Amitav

Maybe you are looking for

  • How do you share photos on the same computer between users???

    Hello, I would like to know how to share photos on the same computer between users... My wife and I have different user accounts on our iMac and I can't figure out how to share photos. I tried everything as told by Apple but it seems you can only sha

  • Document Checkin

    Hi Guys, Am using BAPI  - >   "BAPI_DOCUMENT_CHECKIN2" to checkin a Document When i use this BAPI in R/3 Backend System, the document get"s checked in without any problem. All problem starts when i use this BAPI in External System to checkin Document

  • HT204150 will merging contacts from a macbook air with iCloud duplicate my contacts?  There is no sync option given, only 'merge'!

    will merging contacts from a macbook air with iCloud duplicate my contacts?  There is no sync option given when I select contacts in my iCloud preferences screen, only 'merge'!  Before I do it I'd like to know if I'll create a ton of duplicates.  If

  • Need help in executing sql

    Below is my sql which is taking forever...can any one tell whats wrong SELECT COUNT(ACCOUNT_NBR) FROM STG_ACCOUNT WHERE ACCOUNT_NBR NOT IN(SELECT OU_NUM FROM QA_ACCOUNT) Below is plan for above query Plan SELECT STATEMENT CHOOSE                     4

  • Using paypal with my forms

    Can I print off a ready invoice at the end of the paypal process?