Extract structure changes related to 2LIS_03_BF from sap R/3 4.6 c to ECC 6

Dear Experts,
Recently we have upgraded out BW sytem from BW 3.5 to BI 7.0.
Now planning for R/3 upgrade FROM 4.6c to ECC 6.0 is ongoing .
We have observed that there are some extract structure changes related to 2LIS_03_BF from sap R/3 4.6 c to ECC 6.
Please share some information...if u guys of any?
thanks a lot in advance...
Regards,
SRIKANTH

Im sorry but structures in SBIW - LO Cockit dont use any of this fields.....in LO Cockpit you can see the structure of the Datasource and theres no any of the fields of that structure ....check Cockpit and compare there, structure of SE11 are not the final structure that the extractor uses for Data Staging...
At least for me is what i use...i think that those structures additional are for special for EA retail only...in my case they dont aplly....
I hope this helps you
Regards

Similar Messages

Unable to change Extract structure MC03BF0 for DataSource 2LIS_03_BF

Hi all
In LBWE in R/3, I need the change the extract structure MC03BF0 for DataSource 2LIS_03_BF, by including some fields from MCMSEG pool. On including these fields from MCMSEG pool on the right side table to the left side table, and on confirming these entries, I get the following error message,
' Struct. from appl. 03 due to open V3 proc. not changed '.
The long text for this message is :
'Diagnosis
Changing the extract structure MC03BF0 of application 03 is not allowed as there are no V3 update entries for the update module MCEX_UPDATE_03.
If an extract structure is changed for which there are still open V3 updates, these can no longer be updated and the V3 collective update is terminated.
Procedure
Start the V3 update using the "Job Control" function in the customizing cockpit (transaction yDS:TRAN.LBWE>LBWE) or delete those update entries that are already incorrect. You will find these in the update overview.'
Please guide me with what is to be done so that I can maintain the extract structure.
Thanks
Urmi

Jelina,
I think still some records available at SM13 clear it aswell.
Clear records at LBWQ, SM13, RSA7, Setuptables in all CLIENTS of R/3 and check.
Still a problem, then instead of enhancing datasource from RSA6, take extract structure name and enhance from SE11.
P.S: Its better to create a new post by referencing same thread, so you can close call by assigning poings.
Srini

How to extract the data into Excel / PDF from SAP

Hi,
We have spool number of a report output.
We want to extract the data into Excel / PDF from SAP directly...
Plz guide...

Hi ,
Please check this [Thread|HOW TO DOWNLOAD SAP OUTPUT TO EXCEL FILE;. Hope your problem will be solved.
You can check [this also.|http://wiki.sdn.sap.com/wiki/display/sandbox/ToConvertSpoolDataintoPDFandExcelFormatandSenditinto+Mail]
Thanks,
Abhijit

SL extract structure change

Hello,
I have a SL Data Source from the type 3fi_sl_xx_si. The question is that if one of the fields in the SL will be changed from char 10 into char 3 will the extraction fail?
I mean will i have to generate the extraction strutre again and create infosources for the ledger again?
Please Advice,
David

Hi David,
Earlier I have come across the same situation. First the extraction failed. I have generated extraction structure again and it worked out. Try out if the same may be true in your case also.

Data (Master Data Changes and Transaction Data) from SAP BW to SAP BPC 5.1

Hi guys
I have seen posts on this forum describing data transfers from SAP R/3 to SAP BPC. I assume the procedure for data transfers from SAP BW to SAP BPC 5.1 should be the same i.e. using SSIS packages.
However I have some unique requirements -
1. DATA AT DIFFERENT AGGREGATED LEVELS - I need data from SAP BW at different levels - Some data comes at Product level while other at Customer level and some at Project Level. The current procedure takes BW queries output in excel sheets (6 files) and then use the data manager package to load the data in SAP BPC 5.1 using appropriate transformation and conversion files. This procedure is highly manual and I am looking at using SSIS package to do this. However, because of having data at different levels, it becomes a little tricky. How can we achieve this using SSIS?
2. UPDATING MASTER DATA - I need to update the master data (dimension members) in SAP BPC 5.1 at the start of every month. The current procedure compares (in MS ACCESS) the data from the queries mentioned in 1 to the dimension members in SAP BPC 5.1 and spits a file with the new entries which needs to be manually updated in the appropriate dimensions using Admin Console. I am looking at automating this task. I cannot just replace all the contents of a dimension with the members coming from SAP BW since the dimension members contains some dummy members which are used for planning.
3. HIERARCHY CHANGES - What is the best way to capture the hierarchy changes in SAP BW into SAP BPC 5.1?
Please advise.
Thanks,
Ameya Kulkarni

Hi Ameya,
how did you solve the described problems? Can you give some hints about uploading master data and updating the hierarchy?
BR, André

Extracting LTP (Long Term Planning) Data from SAP ECC to SAP BW

Hello all
Here is the task in hand. There is a standard report that Production Planners execute post their MRP/LTP runs. This report can be accessed through T-code "MCB)". The program in action is RMCB1200. I tried looking for any standard extractors but to no avail. I would be fine to know either or both of the following:
An extractor
All the primary tables involved ( I have found a few tables through the program but a list by some expert will help me understand that I have not missed anything significant)
Also, if anyone has done this before, how was your experience with the extraction in terms of extraction volume and performance.
Regards
Gajendra

After further digging, here is some information that I found out.
T-code
Program
BADI
MSEX
RMDMRPEXTRACT02
MD_SR_LIST_EXTRACT
This could possibly provide the data required. The program can be scheduled and the output can be managed by SPRO settings for Extraction Mode. I am running tests to confirm if it provides me the correct information and matches with MCB) output.
Here are some tables, just for reference:
LTP Tables: PLSC, PBHI, PLPT, MDTP, PLPR, PLPB
MRP Records:
MDKP
MRP Document Header Data
MDTB
MRP Table Structure (no data)
PLSC
Planning Scenario (Long-term Planning)
MDFD
MRP Firming Dates
MDVM
Planning File Entries
S094
LIS -- Stock/Requirements Analysis

Upgrade from SAP R/3 Enterprise 4.70 to ECC 6.0

Hi experts,
I am currently trying to build some knowledge for my final project. (Working as an apprentice in computer science atm)
Main goal of the project is to upgrade our dev system to ECC 6.0.
As far as I understand it, ECC 6.0 ONLY works with NetWeaver 7.0. Do I need to upgrade to NW7 before I upgrade to ECC 6.0 or is there a all-in-one package, which upgrades both at once?
I browsed through a few upgrade guides but didn't really find an explaination I could understand...
Could someone describe the basic steps for such an upgrade? (Like: Copy System - Upgrade NW - Install Components....)
Kinda desperate
Thanks in advance!
Sandro Bollschweiler
P.s.: I hope I used the right Forum for my question...

Hi,
When you upgrade to SAP ERP 6.0 (ECC 6.0), the underlying technology within the SAP R/3 4.7 system is automatically upgraded to the SAP NetWeaver 7.0 version. It is one upgrade;
SAP R/3 4.7 -
> upgrade -
> SAP ERP 6.0
SAP Web AS -
> SAP NetWeaver 7.0
The upgrade guides are you best place for information. The SAP ERP 6.0 has the steps to follow and all requirements.
For installations, please see the aptly named installation guide title "Master guide - SAP ERP 6.0". Both the upgrade and installation guides are available at service.sap.com/instguides.
For system copy info, see the SDN page: System Copy and Migration
There is some demo examples here too
All the best,
Mike.

How to extract Cleared and Open Items from SAP R/3?

Hi experts,
I have a requirement from user to extract cleared and open invoice items from SAP R/3.
Can someone tell me how to do that?
Thanks!

Hi,
Use the Data source 0FI_AR_4 to Know the status (0FI_DOCSTAT) of payment to be done by customer.
OR
Enhance the 2LIS_13_VDITM with VBUP fields which will give the status of Billing.
With rgds,
Anil Kumar Sharma .P

Structure maintenance not provided for Extraction structure MC02M_SCN

Hi BW Experts,
    I am getting an error "Structure maintenance not provided for Extraction structure MC02M_SCN" while maintaining 2LIS_02_SCN datasource.I activated the datasource in RSA5 also.But i couldnt able to maintin this datasource.Can you please help me on this.
Thanks in advance.
Thanks,
Ram.

Hi,
In LBWE for some of the DS Structure is not provided by the SAP.
So For the mentioned DS "CGR" you can't see the structure from LBWE .
Enhancement will be done based on extractstructure.
Two ways 1. Through RSA6
                   2. TAKE THE EXTRACT STRUCTURE NAME OF " CGR" DS from RSA6 and append the fields in SE11.
                   3. Append the fields to the DS Extract strcuture " MC02M_0CGR" in se11
Regards
Ram.
Edited by: Ramakanth Deepak Gandepalli on Dec 30, 2009 5:28 AM

Export data from SAP Document Management System to File System(FileStore)

Hi,
We need to extract/ export data (documents and metadata) from SAP Document Management System to windows File System (File Store), can anyone suggest us tool or methodology to do the same.
Thanks,
Nilesh

I'm also looking for a solution for this problem. We are capturing comments in BW-BPS layouts. They get stored in BW's document management system and we would like to export them out of the system for external reporting into an ACCESS database.

Change the Product version from ECC to ERP 6.0

Hello Experts
I am planning to apply EHP4 on my Development ECC system. In line with the the suggestion from guide "How to install SAP Enhancement Package 4 for SAP ERP 6.0" system I am supposed to define my ECC system with leading product version ERP 6.0.
My Ecc system is currently defined with Product version SAP ECC 6.0.
As per the above guide and also suggestion from "Note 1344564 - Maintenance Optimizer: Check system landscape" which says-
"In particular for a system of the product SAP ERP, assign the product version of SAP ERP, not SAP ECC."
I am supposed to change the leading product version to ERP 6.0.
Now with the current definition of system with product version SAP ECC 6.0, it is being used in a logical component. In order to change this I need to delete the associated logical component. The problem is -this logical component is being used in more than one Project definition that has huge documentation associated with them.
My question -
will the deletion of current logical component affect my documentation in any way?
How can I change the product version from SAP ECC 6.0 to SAP ERP 6.0 without affecting the current setup?
Regards
Dhiraj

Hello Warren,
Thanks for the suggestion.
I have already taken care of all the suggested notes in the master note that you suggested. I am able to generate the XML file for other solution defined in my system. In those I have my ECC system defined purely as ERP 6.0 system. I am not able to make out why its not generating the XML for this solution.
Regards
Dhiraj

Where can I found table or structure changes across different releases ?

Hi !
Just one question:
I would like to found where can I see tables or structures changes across differents releases of SAP R/3?, i tried to found a doc about this... but i couldn't found it.
For example, which table have been modify form version 4.x to 4.z, i mean fields added or modified, etc...
Thanks in advance,
Albio.-

Hi Albio,
You can do this. You can check the activation log of any table which you have to find for change history.
Just go to se11 and type the table name click on display and then go to utilities -> then activation log, it will show you all the changes made to table
Regards
Sumit Bhutani
Ps reward pts if helpful

How to extract Inventory data from SAP R/3 system

Hi friends How to extract Inventory data from SAP R/3 system? What are report we may expect from the Inventory?

Hi,
Inventory management
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20handle%20inventory%20management%20scenarios.pdf
How to Handle Inventory Management Scenarios in BW (NW2004)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Loading of Cube
ref.to page 18 in "Upgrade and Migration Aspects for BI in SAP NetWeaver 2004s" paper
http://www.sapfinug.fi/downloads/2007/bi02/BI_upgrade_migration.pdf
Non-Cumulative Values / Stock Handling
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
Non-Cumulatives
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Here you will find all the Inventory Management BI Contents:
http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
2LIS_03_BX- Initial Stock/Material stock
2LIS_03_BF - Material movements
2LIS_03_UM - Revaluations/Find the price of the stock
The first DataSource (2LIS_03_BX) is used to extract an opening stock balance on a
detailed level (material, plant, storage location and so on). At this moment, the opening
stock is the operative stock in the source system. "At this moment" is the point in time at
which the statistical setup ran for DataSource 2LIS_03_BX. (This is because no
documents are to be posted during this run and so the stock does not change during this
run, as we will see below). It is not possible to choose a key date freely.
The second DataSource (2LIS_03_BF) is used to extract the material movements into
the BW system. This DataSource provides the data as material documents (MCMSEG
structure).
The third of the above DataSources (2LIS_03_UM) contains data from valuated
revaluations in Financial Accounting (document BSEG). This data is required to update
valuated stock changes for the calculated stock balance in the BW. This information is
not required in many situations as it is often only the quantities that are of importance.
This DataSource only describes financial accounting processes, not logistical ones. In
other words, only the stock value is changed here, no changes are made to the
quantities. Everything that is subsequently mentioned here about the upload sequence
and compression regarding DataSource 2LIS_03_BF also applies to this DataSource.
This means a detailed description is not required for the revaluation DataSource.
http://help.sap.com/saphelp_bw32/helpdata/en/05/c69480c357354a8846cc61f7b6e085/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/content.htm
These are the standard data sources used for Inventory extraction.
Hope this helps.
Thanks,
JituK

Relation between LIS datasources and Extract Structures

Roberto,
Your detailed information does make it very clear why the SAP creates 2 SnnBIW1, SnnnBIW2 tables, and a structure.
I have another question related to this process.
Once you create a datasource from the custom LIS structures, you can assign a Development class to that datasource.
But the automatically created 2 tables and the structure are local objects, and you cannot reassign them to other object. That is fine because when you export/import the transport, all the other objects are also transported.
But when we enhance the extract structures, it creates a structure ZASnnnBIWS which also HAS TO BE a local object. This creates a problem of how do we transport these changes?
I would appreciate your insight into this.
Thanks
InduBala

I check from LBWE maintenance structure column, and the fields are there on the left hand side for the selection criteria.
How would I check "..fields you have enhaced are ready to use...." from LBWE.
From RSA6, I would doubleclick on the LIS datasource, and I see no enhanced fields and therefore could not see if they are hidden.
"Did you check in LBWE if your strcutures have the fields ready to use?" How would I do this? Maybe this is the problem.
Thanks
Message was edited by:
NoNoNo ...

Extraction from SAP, hidden fields problem

Hi Expeerts,
I have the following problem / question:
From an SAP Datasource (2lis_11_vaitm) we have some fileds, those are HIDED, and we need them. This is a central SAP, and a lot of BW systems connect to this SAP.
The problem is, that we need a field from that datasource (and other BWs do not need), that has 'HIDDEN' option. The SAP side is afraid of having problem, when they just uncheck that option. (TELF1; KONDA fields we need).
Does anyone know, what is the affects on other BW systems, when we unhide this fields? Of course we load with delta from this source.
If a field is hidden in SBIW-Maintain Datasources, am I right, that the delta does not collect those fields, or it is collected, just not sent to BW systems?
Any good idea, how can we get that fields in other way, because it seems, that the datasource cannot be modifyed, because of the other countries' BWs, connected to teh centra SAP.
I hope i were clear, but if not, please ask me.
Thanks for Your help.
Laszlo
Edited by: László Györkös on Jan 30, 2009 11:07 AM

Hi,
If a field is hidden in SBIW-Maintain Datasources, am I right, that the delta does not collect those fields, or it is collected, just not sent to BW systems?
--> As hidden fields are already available in extract strucute, unhiding will not create any problem. As far as i know hidden means it will transfer data from extract structure to further.
--> You can try pulling this particular data using generic datasource. OR
--> Enhance datasource by adding required fields and use. OR
--> Unhide files and use.
Note: Bit careful while transpporting datasource to production as time stamp changes.
Srini

Extract structure changes related to 2LIS_03_BF from sap R/3 4.6 c to ECC 6

Similar Messages

Maybe you are looking for