Extract Structure Issue
Hi,
I am facing issue with the extract structure fields and datasource fields.One particular field is there in the extract structre,but its not there in the datasource when i checked in RSA6.
Can u please help me in this.
Thanks
Madhu
Hi,
Please refer the below document created by me on the same issue that you have.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c008cd97-ef00-2d10-d1ad-867b9c3f063c
Hope this helps
regards,
mahesh
Similar Messages
-
BW FICA extract structures corrupted after upgrade from 4.6C to ECC6
Hi All. After the upgrade an include (FKKBWP) in the extract structure FKKOPBW_BASIC contained a field belonging to the APPEND structure ZAFKKOPBW_BASIC (originating from enhancing the configured structure). Also ZAFKKOPBW_BASIC is not visible in FKKOPBW_BASIC anymore, although when checking/activating the structure it complains about duplicate fields, which can only happen if ZAFKKOPBW_BASIC is still referenced. Furthermore, some new includes have also appeared in the extract, amongst others FKKOPBW_EVOLVED.
I have not been able to find any documentation regarding this. Two different systems were upgraded and the structures were corrupted in both systems in the same way, so this is not a fluke.
The application dumps when one tries to access it via SBIW->Settings for Application-Specific DataSources->Contract accounts receivable->Define Fields for the Extraction of Open Items, because the config and structures do not match.
All of this also applies to the Cleared Items as well.
Has anybody encountered this or can somebody point me to some documentation referering to this problem?
Regards,
Johan LoockHi
Please refer to the SAP note 1278056 and 1278115 - PDS Display: F4-characteristic values are not selectable. Hope this will resolve your issue.
Regards,
JB -
Need help in enhancing CRM datasource /extract structure
Hello Experts,
I have come across an issue with a CRM DR phase 1 report "Program Status Management report".
The user wants to display Mobile number and Pager number of a contact person for the customer.
Contact person is a Business Partner (Mobile no, Pager no are attributes for Business partner), and the extractor which extracts communication information about a business partner is BUPA_DEF_ADDRESS_BW (from data source 0BP_DEF_ADDRESS_ATTR.)
This extractor only gets First Telephone number and Fax number from the table. The same CRM table also has the info about Mobile number and Pager number. But BUPA_DEF_ADDRESS_BW is a standard extractor.
From the searched forums, mobile number is stored in the field TEL_NUMBER from table ADR2 in which we need to filter the R3_USER = 3. We need to know how we can append/include this mobile phone/pager number fields in the extract structure since this is a standard extractor and might need to edit a BADI/FM. Please advise. Thanks!there is no different as generic DataSource.
1. TC: RSA6, find your DataSource and click on " extend extractStructure" at the navigation bar.
2. TC: SE38 to write UserExit to populate the data for append fields.
UserExit: ZXRSAU01 if your DataSource is for Transaction Data
ZXRSAU02 if your DS is for Master Data
hope this help -
Can I Add all the fields from POOL to EXTRACT Structure in LBWE
Dear Experts,
Our Client is asking to add all the fields in the POOL Table to EXTRACT STRUCTURE in LBWE that is he wants to add all the fields from Right Hand Side Table to Left Hand Side Table in the Maintenance of LBWE of all the SD Data Sources. For few fields there is no data even though they are saying that in the nearer future we are going to use all most all fields.
Like wise they are asking to add all the tables like VBAP, VBUP, VBAK, VBKD, VBUK, etc.,
My Questions are:
1.Is it advisable or recommended to add all the fields from POOL to Extract Structure because client desperately needs them.
2.Is there any performance issue when we add the fields from POOL to Extract Structure at the time of extracting data from R/3 to BI.
Regards,
Sai PhaniHi Sai,
1.Is it advisable or recommended to add all the fields from POOL to Extract Structure because client desperately needs them.
we can add all the fields from the POOL to Extract Structure, if really your business requires to pull all the data.
2.2.Is there any performance issue when we add the fields from POOL to Extract Structure at the time of extracting data from R/3 to BI.
Ofcourse, there will be performance matters, because we have to extract maximum number fields data to BI side. If we have data for all the fields in R/3, we may face performance problems like load takes long time.
Hope this helps.
Veerendra. -
Unable to create Custom Datasource on AFRU -Invalid extract structure error
Hello folks,
All SDN experts I need urgent help with an issue here.I am trying to create a custom datasource on a view on AFRU table.But i am getting this error 'Invalid extract structure template ZAFRU_V ' , i know it could be cuz of the field SMENG which is refrenced to AFVV tables MEINH field.My boss needs to have this field.I would like to know what can i do to get it, do i need to write a user exit, will that help or not. Please tell me what to do.
Thanks,i tried what you asked me to do, this was my joing condition
AFRU MANDT = AFVV MANDT
AFRU AUFPL = AFVV AUFPL
AFRU APLZL = AFVV APLZL
But then what i ran into was if the counter (APLZL) was 0 or blank it wouldnt get that data for me.That means i will loose hundreds or thousands of records if they have confirmation and routing number of ops in order but no counter.Please assist.
And to answer is open so please any one who sees this and knows the answer please reply.
Thanks. -
How to uncheck the hide field in extract structure.
Hello All,
I have enhanced (Appended) a field ZZVATREC to a generic data source created for billing data(A View). This field is as hide field in the extract structure.I am able to unhide the field in change mode but when saving an error is comming like still errors in OLTP source system.
This field is I want to populate by coding and done proper coding also.
I have tried with Roosfield table. but I did am unable to see my appended field in roosfield table for the datasource.
In Rsa3 this field is populated.
Could anyone help me to solve this issue.
RegardsHi Nivas,
The probable reason could be that the feild being appended is either a quantiy or currency feild and hence the definition of the append is not complete.
This requires to mention the currency or unit refernce and then would you be able to unhide.
There are amny posts for this topic in this forum.
Try searchin it, if you have any difficulty making hte change.
Naveen.A -
Hi Gurus,
I am having trouble with some BC datasources in the SRM system .
Whenever I try to access the datasources via RSA6 I get the message "Extract structure is not valid" the long text help then tells me : You have tried to test the extraction of a DataSource with an inactive extraction structure (BBPT_BUS000_BW).
Whenever I try to activate the extract structure via SE11 it tells me : BBPT_BUS000_BW does not exist. Check name.
Did anybody come across this issue before ?
Thnx for the help !
JosHi,
did u installed ur data source in RSA5 first or not..?
if not first u try to install it and then try to use it from RSA6.
Hope it helps-
Regards-
MM -
Inactive the extract structure
hi friends,
i like to know why we inactive the extract structure in lo cockpit extraction?
thanks in advance
kumarHi,
Check this thread will solve ur issue..
Re: Inactive Extract structure?
Thanks -
2LIS_05_Q0ITEM Enhancement / Extract structure
Hi experts,
I am trying to enhance a data source and am having an issue adding a field to the extract structure.
The 2LIS_05_Q0ITEM includes a field called MATNR for the Material Number of the claimed notification (Table MCQMEL) which I don't need (as it is in the Notification Data source).
What I need is the material number of the replacement part (MATNR / Table MCQMFE). I can't add it in the Extraction Customizing cockpit. (2 fields with the same is not possible and it isn't possible either to remove the MCQMEL/MATNR field).
I tried to find a workaround using a user exit to enhance the extract structure but couldn't find anything allowing me to retrieve the MATNR from MCQMEL.
Any clues on how to add this field to the datasources other than doing a select fron the Table in the extract structure?
Thanks,Hi,
The LO steps are described in:
http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
http://wiki.ittoolbox.com/index.php/HOWTO:How_to_do_LO_Extraction
Go through these weblogs for detailed understanding of LO extraction mechanism. If you have any further queries, post them.
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2005/09/05/sap-bw-and-business-content-datasources-in-pursuit-of-the-origins
Bye
Dinesh -
Different number of fields in extract structure and Datasource
Hi All,
There is a data source 0FUNCT_LOC_ATTR, which are showing 16 fields in the datasource. But when i went into the extract structure, it shows 25 fields. Is it any kind of bug?
thanks
AnnieHi MTi,
Thanks for your reply. I checked in ROOSOURCE and ROOSFIELD table and found that we activated the datasource somewhere in 14.08.2008 and the delivered version is in 18.11.2008. Now i reactivated the datasource in RSA5 and could see all the fields in RSA6.
Actaully we posted the issue to SAP and they have come back with the same reply what you have mentioned.
Cheers
Annie -
Enhancing the extract structure of Datasource 0CO_OM_CCA_9
Hi,
My requirement goes as, we have a cube already getting populated with the data of 0CO_OM_CCA_9.
Now I have a accounting doc. available. My issue is we need a corresponding COPA doc.and its customer and produt for this accounting doc.
My Functional guy says, we can get the corresponding copadoc. and its details from the table CE10010. So now I need to add to fields to my stnd. extract structure and populate these 2. I know how to add them to the structure. My issue is all about populating them.
I see in RSA2 , that the extractor is a FM, which provides no exit within .
As far as my knowledge goes, is it sufficient if I write some code in the CMOD to fetch data from CE10010 and then pass it on to the extract structure, or do we have any thing else to be done to populate them.
Thanks in advance,
SudhaHi
Enhancing Extract structure can be achieved through the coding (cmod).
Or else you can even go for the Generic Data Source to combine both the tables.
Hope it helps -
Extract structure /BIC/CE80CUSTOMERT is not active
Hi,
I have a datasource (080CUSTOMERT) in BI7.0 generated by 'Generate Export DataSource' for 0CUSTOMER Texts. When I tried to transport this into Quality system, I am getting the following error.
Extract structure /BIC/CE80CUSTOMERT is not active
The extract structure /BIC/CE80CUSTOMERT of the DataSource 80CUSTOMERT is invalid
Has anyone faced similar issue and how to resolve this issue. Thanks in advance.
-Ramu can try this.
go to ur QA system and do a generate export datasource in the source sytem then replicate the datassource in the target system then try to transport the datasoure with infosource.
chk this link also
generate the export datasource -
Hello All,
The extract structure for 2lis_11_vaitm has been changed and since then whenever I try to execute the datasource using RSA3.
I get an error Import_mismatch_error.
The extractor was working fine in dev. So I collected one structure which was missing in quality.
After releasing the same in quality, I deleted the setup tables and did run RSA3 - I got 0 records.
As per the SAP note 328181 - the old Sales orders are not compatible with the new structure and so we get the same error.
If any new documents are posted they will come in RSA3. How do I make sure that in Production I dont miss any data?
Regards,
NikekabHello Venkat,
I found one error description though:
Error when resetting DataSource 2LIS_11_VAITM OKQCLNT332 to the active version
Message no. RSO410
Diagnosis
Errors arose when activating DataSource 2LIS_11_VAITM. An active version already existed before theactivation.
System Response
DataSource 2LIS_11_VAITM could not be resetto the old active version. Since the generated objects no longer correspond to the old active version, they were reset to inactive.
Procedure
The old active version of DataSource 2LIS_11_VAITMcan no longer be used. Remove the cause ofthe activation error and activate DataSource 2LIS_11_VAITM anew.
Regards,
NIKEKAB -
Custom Datasource using View COVJ - R8359 Invalid extract structure
I'm trying to build a custom datasource so I can get at plan line item data with partner object (I've tried using 0CO_OM_CCA_1 but I dont get the partner object for plan data - no idea why). So I thought if I create a datasource using COVJ I can get it out. However when I try and save the custom datasource (created using RSO2) I get the error R8359 Invalid extract structure: You tried to generate an extract structure with the template structure COVJ. This operation failed, because the template structure quantity fields or currency fields, for example, field WOG001 refer to a different table.
I saw posts saying when people get this error thye should reference the table these fields come from in the view. So I've talked to our ABAP'er and I asked him to reference the table these fields come from but he said this cant be done because these come from a structure not a table.
Any ideas?
Thanks
JoelThe WOG* columns in table COEJ, one of the tables contributing to the COVJ view, use CCCUR-CURKY as the reference table-column for those quantities. The ABAPer you spoke to is correct that CCCUR is a structure. View value fields inherit their reference table-column from the source, in this case COEJ, and since this source table is an SAP delivered table it cannot be modified change this reference.
This means that you're only option for extracting the data out of the COVJ view would be to create a Function Module and use that Function Module as the basis for your DataSource. -
Dear All,
I have created a view on following tables MARA, AFKO and MSEG. The Table/Join condition is as follow:
AFKO--AUFNR = MSEG--AUFNR
AFKO--PLNBEZ = MARA--MATNR
I have included all the fields from MSEG and other all fields from MARA and AFKO. The view is created successfully and contents/records are also being fetched/displayed from this view.
See screen shot as well:
But when I go to RSO2 to create a "Generic DataSource" on this view. I get a series of warning messages and then error message "Invalid Extract Structure" and therefore I'm unable to create my DataSource on this view. See below screen shots of warning and error messages.
Other warning messages are as follow:
Field GAMNG with reference field MEINS: Reference table MARA is replaced by ZOXPRD0150
Field PLSVB with reference field PLNME: Reference table PLKO is replaced by ZOXPRD0150
Field PLSVN with reference field PLNME: Reference table PLKO is replaced by ZOXPRD0150
Field LODIV with reference field MEINS: Reference table MARA is replaced by ZOXPRD0150
Following is the screen shot of error message:
1. How can I get rid of this error message and be able to create my "Generic DataSource" on top of this "View"?
2. What should I do to resolve the above warning and error messages?
I will appreciate your reply.
Many thanks!
Tariq AshrafHi Vipul,
as you can find in CKIS table, the reference feild for value feild "WERTN" is missing.
As per the table the reference feild is HWAER. This should have been used in place of FWAER.
Try mentioning this in your view and this should work.
Also I am a little enthusiastic to know, what are you trying to get from the datasource.
If you are trying to get the cost estimate of multi level BOM, not (just one child level), then this approach may not work.
There is a BAPI that gives such itemization split. Just FYI, in case you are looking for multi level explosion.
"BAPI_COSTESTIMATE_ITEMIZATION".
Hope this helps.
Naveen.A
Maybe you are looking for
-
Trying to duplicate the contents of one laptop's hard drive to another. I'm doing volunteer tech support for a local school, which has about 30 Satellite (C650D) and netbook (NB505). I would like to update software on one laptop (new anti-virus, upd
-
Using my iMac as a monitor for Mac mini.
I'd like to use my mid 2010 27" iMac as a monitor for my Mac mini. Is this possible with thunderbolt?
-
Action script for batch-opening psd layer files flat? (alt+shift?)
hi i am daily batch processing with an action script to make flat tiffs from psd layer files, like 10-100 files every couple of days in my workflow. until now i could not fine a solution to begin the batch processing-action with opening layer files F
-
Question about syncing albums with Facebook
I have Aperture set up so I can publish albums to my FB account. However, everytime I open Aperture and it goes to sync with FaceBook, it copies all my photos I have on Facebook that I don't have in Aperture into my library. For example, all the pi
-
Is there a file conversion for CC2014 Indesign files to be read by CS6?
Is there a file conversion for CC2014 Indesign files to be read by CS6?