Extract text data from dbc on the fly
Hi All,
I am currently setting up a testsystem for a CAN based project with LV7.1 and Teststand 4.
I have my PXI8461 CAN card sending and receiving CAN messages fine but I wish to perform some work on all channel ( signal ) information before passing it up to Teststand for analysis.
For my Teststand purposes it is preferable to work with text, for example if the DUT has a button pressed then the appropriate signal gets sent up to Teststand as "On" or "Off" etc rather than 1 and 0. ( CANoe has this feature and the LDF driver kit for LIN in Labview also )
This is very useful for Teststand when checking test conditions rather than trying to equate a test with a number, so tests can be written like if result = "Ignition On" then Pass else Fail.
The dbc file I have contains this text representation of data but is there any VI which can be ran after a Read Channel which will convert Channel data to text ?
Thanks,
Mike
Hi Mike,
Thanks for the post! and I hope your well today.
Im not very familiar with the CAN palette, but Im sure we could use Lower Level VIs to build this functionality.
So, when on the fly, the CAN message is a number (0 or 1) and then convert it using a case structure?
I imagine this issue is more complex then I have caught on so far, so please, maybe some example code etc would help.
Kind Regards,
James.
Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help!
Similar Messages
-
Ways to extract text/data from a pdf
I have just been given five large boxes of documents which are old work orders which include (in the same position on every page) a customer's name, address, tel etc. I'm pretty adept at scanning stuff to pdf using Adobe Acrobat 9.0 Pro (version 9 5 1 283) but I don't know how (if it's even possible) to batch scan just that part of the page which contains the customer data and save it to Excel or csv or similar. I know I could highlight the required text on each page and copy and paste it into Excel but is there a more elegant solution? To create the pdf, I can scan using our office Epson all-in-one (although it's on the other side of the office) or a Neatdesk Scanner I'm trying out. The latter scans the pages quickly but if I set the Neat software to treat the document as a contact card, it only picks up our company address from the top of the page and ignores everything else ;-) I'm running Windows 7.
Hello
You may try the following AppleScript script. It will ask you to choose a root folder where to start searching for *.map files and then create a CSV file named "out.csv" on desktop which you may import to Excel.
set f to (choose folder with prompt "Choose the root folder to start searching")'s POSIX path
if f ends with "/" then set f to f's text 1 thru -2
do shell script "/usr/bin/perl -CSDA -w <<'EOF' - " & f's quoted form & " > ~/Desktop/out.csv
use strict;
use open IN => ':crlf';
chdir $ARGV[0] or die qq($!);
local $/ = qq(\\0);
my @ff = map {chomp; $_} qx(find . -type f -iname '*.map' -print0);
local $/ = qq(\\n);
# CSV spec
# - record separator is CRLF
# - field separator is comma
# - every field is quoted
# - text encoding is UTF-8
local $\\ = qq(\\015\\012); # CRLF
local $, = qq(,); # COMMA
# print column header row
my @dd = ('column 1', 'column 2', 'column 3', 'column 4', 'column 5', 'column 6');
print map { s/\"/\"\"/og; qq(\").$_.qq(\"); } @dd;
# print data row per each file
while (@ff) {
my $f = shift @ff; # file path
if ( ! open(IN, '<', $f) ) {
warn qq(Failed to open $f: $!);
next;
$f =~ s%^.*/%%og; # file name
@dd = ('', $f, '', '', '', '');
while (<IN>) {
chomp;
$dd[0] = \"$2/$1/$3\" if m%Link Time\\s+=\\s+([0-9]{2})/([0-9]{2})/([0-9]{4})%o;
($dd[2] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of CODE\\s/o;
($dd[3] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of DATA\\s/o;
($dd[4] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of XDATA\\s/o;
($dd[5] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of FARCODE\\s/o;
last unless grep { /^$/ } @dd;
close IN;
print map { s/\"/\"\"/og; qq(\").$_.qq(\"); } @dd;
EOF
Hope this may help,
H -
Hi,
We have a NOTE section/field in CRM, which is used to enter some notes by the users on Activities. We need to pull it into BW.How to do it. NOTE can be any long!Thanks to Eugene Khusainov
Long texts in SAP BW: Modeling Follow Up
Of course the clever way would be to publish to a KM document then attach the document a BLOB object to the master data - but you can figure out how to that yourself (and don;t forget to write a blog about it) -
How can I use Automator to extract specific Data from a text file?
I have several hundred text files that contain a bunch of information. I only need six values from each file and ideally I need them as columns in an excel file.
How can I use Automator to extract specific Data from the text files and either create a new text file or excel file with the info? I have looked all over but can't find a solution. If anyone could please help I would be eternally grateful!!! If there is another, better solution than automator, please let me know!
Example of File Contents:
Link Time =
DD/MMM/YYYY
Random
Text
161 179
bytes of CODE memory (+ 68 range fill )
16 789
bytes of DATA memory (+ 59 absolute )
1 875
bytes of XDATA memory (+ 1 855 absolute )
90 783
bytes of FARCODE memory
What I would like to have as a final file:
EXCEL COLUMN1
Column 2
Column3
Column4
Column5
Column6
MM/DD/YYYY
filename1
161179
16789
1875
90783
MM/DD/YYYY
filename2
xxxxxx
xxxxx
xxxx
xxxxx
MM/DD/YYYY
filename3
xxxxxx
xxxxx
xxxx
xxxxx
Is this possible? I can't imagine having to go through each and every file one by one. Please help!!!Hello
You may try the following AppleScript script. It will ask you to choose a root folder where to start searching for *.map files and then create a CSV file named "out.csv" on desktop which you may import to Excel.
set f to (choose folder with prompt "Choose the root folder to start searching")'s POSIX path
if f ends with "/" then set f to f's text 1 thru -2
do shell script "/usr/bin/perl -CSDA -w <<'EOF' - " & f's quoted form & " > ~/Desktop/out.csv
use strict;
use open IN => ':crlf';
chdir $ARGV[0] or die qq($!);
local $/ = qq(\\0);
my @ff = map {chomp; $_} qx(find . -type f -iname '*.map' -print0);
local $/ = qq(\\n);
# CSV spec
# - record separator is CRLF
# - field separator is comma
# - every field is quoted
# - text encoding is UTF-8
local $\\ = qq(\\015\\012); # CRLF
local $, = qq(,); # COMMA
# print column header row
my @dd = ('column 1', 'column 2', 'column 3', 'column 4', 'column 5', 'column 6');
print map { s/\"/\"\"/og; qq(\").$_.qq(\"); } @dd;
# print data row per each file
while (@ff) {
my $f = shift @ff; # file path
if ( ! open(IN, '<', $f) ) {
warn qq(Failed to open $f: $!);
next;
$f =~ s%^.*/%%og; # file name
@dd = ('', $f, '', '', '', '');
while (<IN>) {
chomp;
$dd[0] = \"$2/$1/$3\" if m%Link Time\\s+=\\s+([0-9]{2})/([0-9]{2})/([0-9]{4})%o;
($dd[2] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of CODE\\s/o;
($dd[3] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of DATA\\s/o;
($dd[4] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of XDATA\\s/o;
($dd[5] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of FARCODE\\s/o;
last unless grep { /^$/ } @dd;
close IN;
print map { s/\"/\"\"/og; qq(\").$_.qq(\"); } @dd;
EOF
Hope this may help,
H -
Example on extracting time data from clusters
Hi Experts,
Please send me a sample code for time data extraction from clusters. or steps to extract time data from clusters.
Thank you.
Regards,
Admir.
Points will be rewarded.Hi
see the sample report for time data fetching
But ime data is not fetched from Clusters, only payroll data is fetched from clusters
Time related infotypes are 2000 to 2999.
REPORT zh_absence_quota
NO STANDARD PAGE HEADING
MESSAGE-ID zh_msg
LINE-SIZE 169
LINE-COUNT 60(1).
T A B L E S D E C L A R A T I O N S
TABLES: pernr, " Logical PNP
t001p, " Personnel Subarea
t529u, " Employment Status
t500p, " Personnel Area
t501, " Employee Group
t503k, " Employee Subgroup
t549a, " Payroll Area
t554s, " Absence Type
t554t, " Absence Type Texts
t556a, " Quota Type
t527x, " Orgn. Unit
t556b, " Quota Type Text
pa0003. " Payroll Status
INFOTYPES:
0000, " Actions
0001, " Organizational Assignment
2006, " Absence Quota
2001. " Absences
T Y P E S D E C L A R A T I O N S
Employee Absence Structure
TYPES: BEGIN OF s_2001,
pernr TYPE persno, " Personal Number
awart TYPE awart, " Absence Type
subty TYPE subty, " Sub Type
endda TYPE endda, " End date
begda TYPE begda, " Begin date
abrtg TYPE abrtg, " Absence days
ename TYPE emnam, " employee Name
atext TYPE abwtxt, " Absence Type Text
END OF s_2001.
Employee Absence Quota Structure
TYPES: BEGIN OF s_2006,
pernr TYPE persno, " Personal Number
ktart TYPE abwko, " Absence Quota Type
year(4) TYPE n, " Year
subty TYPE subty, " Sub Type
endda TYPE endda, " End date
begda TYPE begda, " Begin date
anzhl TYPE ptm_quonum, " Absence Entitlement days
ename TYPE emnam, " employee Name
ktext TYPE kotxt, " Absence Type Text
kverb TYPE kverb, " Deduction Quota days
anzhb TYPE ptm_quonum, " Balance days
END OF s_2006.
Combined Employee Absence and Quota Structure
TYPES: BEGIN OF s_rep,
pernr TYPE persno, " Personal Number
ktart TYPE abwko, " Absence Quota Type
year(4) TYPE n, " Year
anzhl TYPE ptm_quonum, " Absence Entitlement days
kverb TYPE kverb, " Deduction Quota days
anzhb TYPE ptm_quonum, " Balance days
ktext TYPE kotxt, " Quota Type Text
awart TYPE awart, " Absence Type
abrtg TYPE abrtg, " Absence days
ename TYPE emnam, " employee Name
atext TYPE abwtxt, " Absence Type Text
endda TYPE endda, " End date
begda TYPE begda, " Begin date
END OF s_rep.
Declaration of Variables
DATA : gv_atext TYPE abwtxt, " Absence Type Text
gv_ktext TYPE kotxt, " Absence Type Text
gv_title1 TYPE sylisel, " Report title
gv_year(4) TYPE c, " Year
gv_mon(2) TYPE c, " Month
gv_hrs TYPE abwtg, " Hours
gv_date TYPE sydatum, " Date
gv_date1 TYPE sydatum, " Date
gv_dial. " Color flag
Declaration of Constants
CONSTANTS :
c_x TYPE c VALUE 'X', " Sign
c_1 TYPE persg VALUE '1', " Emp Group
c_pernr(8) TYPE n VALUE '00000000', " Pernr
c_moabw TYPE moabw VALUE '01', " Per SA Grouping
c_mozko TYPE mozko VALUE '01', " Per SA Grouping
c_mopgk TYPE mopgk VALUE '1', " Emp SGrp Grouping
c_endda TYPE sydatum VALUE '99991231', " End Date
c_val1(2) TYPE c VALUE '31', " Date Type
c_val2(2) TYPE c VALUE '12', " Date Type
c_val LIKE p0041-dar01 VALUE '01', " Date Type
c_date1 LIKE sy-datum VALUE '18000101'. " Date
I N T E R N A L T A B L E S D E C L A R A T I O N S
DATA: i_2001 TYPE STANDARD TABLE OF s_2001 WITH HEADER LINE,
i_2006 TYPE STANDARD TABLE OF s_2006 WITH HEADER LINE,
i_rep1 TYPE STANDARD TABLE OF s_2006 WITH HEADER LINE,
i_rep TYPE STANDARD TABLE OF s_rep WITH HEADER LINE.
S E L E C T I O N S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_ktart FOR t556a-ktart, " Absence Quota Type
s_awart FOR t554s-subty. " Absence Type
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(33) text-003. " Quota & Absence
PARAMETERS: p_qa RADIOBUTTON GROUP rb1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(33) text-004. " Quota
PARAMETERS: p_q RADIOBUTTON GROUP rb1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(33) text-005. " Absence
PARAMETERS: p_a RADIOBUTTON GROUP rb1.
SELECTION-SCREEN END OF LINE.SELECTION-SCREEN END OF BLOCK b2.
I N I T I A L I Z A T I O N *
INITIALIZATION.
A T S E L E C T I O N - S C R E E N *
AT SELECTION-SCREEN.
Validate the screen fields
PERFORM validate_screen.
S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
Selection of Period
PERFORM get_period.
Get PERNR from LDB
GET pernr.
IF p0000-stat2 <> '0'.
Get the data from PA0001,PA2001, PA2006
PERFORM get_pers_data.
ENDIF.
T O P - O F - P A G E *
TOP-OF-PAGE.
Header of the List
PERFORM header.
E N D - O F - P A G E *
Footer
END-OF-PAGE.
IF p_qa = c_x.
Display both Absence and Quota Data
WRITE /1(188) sy-uline.
ELSEIF p_q = c_x.
Display only Quota Data
WRITE /1(114) sy-uline.
ELSEIF p_a = c_x.
Display only Absence Data
WRITE /1(125) sy-uline.
ENDIF.
E N D - O F - S E L E C T I O N *
END-OF-SELECTION.
Combine the Absence and Quota Data
PERFORM append_data.
IF p_qa = c_x.
Display both Absence and Quota Data
PERFORM display_qa_data.
ELSEIF p_q = c_x.
Display only Quota Data
PERFORM display_q_data.
ELSEIF p_a = c_x.
Display only Absence Data
PERFORM display_a_data.
ENDIF.
*& Form validate_screen
Validation of Selection Screen fields
FORM validate_screen .
Validation of Personnel Number
CLEAR pa0003.
IF NOT pnppernr[] IS INITIAL.
SELECT pernr
FROM pa0003 UP TO 1 ROWS
INTO pa0003-pernr
WHERE pernr IN pnppernr.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Personnel Number'(006).
ENDIF.
ENDIF.
Validation of Employee Status
CLEAR t529u.
IF NOT pnpstat2[] IS INITIAL.
SELECT SINGLE statv
INTO t529u-statv
FROM t529u
WHERE statv IN pnpstat2 AND
statn = '2' AND
sprsl = sy-langu.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Invalid Employee Status'(007).
ENDIF.
ENDIF.
Validation of Personnel Area
CLEAR t500p.
IF NOT pnpwerks[] IS INITIAL.
SELECT persa
FROM t500p UP TO 1 ROWS
INTO t500p-persa
WHERE persa IN pnpwerks.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Personnel Area'(008).
ENDIF.
ENDIF.
Validation of Personnel Sub Area
CLEAR t001p.
IF NOT pnpbtrtl[] IS INITIAL.
SELECT btrtl
FROM t001p UP TO 1 ROWS
INTO t001p-btrtl
WHERE btrtl IN pnpbtrtl.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Personnel Sub Area'(009).
ENDIF.
ENDIF.
Validation of Employee Group
CLEAR t501.
IF NOT pnppersg[] IS INITIAL.
SELECT persg
FROM t501 UP TO 1 ROWS
INTO t501-persg
WHERE persg IN pnppersg.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Employee Group'(010).
ENDIF.
ENDIF.
Validation of Employee Sub Group
CLEAR t503k.
IF NOT pnppersk[] IS INITIAL.
SELECT persk
FROM t503k UP TO 1 ROWS
INTO t503k-persk
WHERE persk IN pnppersk.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Employee Sub Group'(011).
ENDIF.
ENDIF.
Validation of Payroll Area
CLEAR t549a.
IF NOT pnpabkrs[] IS INITIAL.
SELECT abkrs
FROM t549a UP TO 1 ROWS
INTO t549a-abkrs
WHERE abkrs IN pnpabkrs.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Employee Payroll Area'(026).
ENDIF.
ENDIF.
Validation of Absence Type
CLEAR t554s.
IF NOT s_awart[] IS INITIAL.
SELECT subty
FROM t554s UP TO 1 ROWS
INTO t554s-subty
WHERE subty IN s_awart AND
moabw EQ c_moabw AND
endda EQ c_endda.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Employee Absence Type'(012).
ENDIF.
ENDIF.
Validation of Absence Quota Type
CLEAR t556a.
IF NOT s_ktart[] IS INITIAL.
SELECT ktart
FROM t556a UP TO 1 ROWS
INTO t556a-ktart
WHERE ktart IN s_ktart AND
mopgk EQ c_mopgk AND
mozko EQ c_mozko AND
endda EQ c_endda.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e999 WITH 'Incorrect Employee Quota Type'(013).
ENDIF.
ENDIF.
ENDFORM. "validate_screen
*& Form get_period
Get the Correct Period based on Selection screen selection
FORM get_period.
CLEAR: gv_year,gv_mon, gv_date, gv_date1.
gv_year = sy-datum+0(4).
gv_mon = sy-datum+4(2).
IF pnptimr1 = c_x. " Current Date
pnpbegda = sy-datum.
pnpendda = sy-datum.
ELSEIF pnptimr2 = c_x. " Current Month
CONCATENATE gv_year gv_mon c_val INTO gv_date.
CONCATENATE gv_year gv_mon c_val1 INTO gv_date1.
pnpbegda = gv_date.
pnpendda = gv_date1.
ELSEIF pnptimr3 = c_x. " Current Year
CONCATENATE gv_year c_val c_val INTO gv_date.
CONCATENATE gv_year c_val2 c_val1 INTO gv_date1.
pnpbegda = gv_date.
pnpendda = gv_date1.
ELSEIF pnptimr4 = c_x. " Upto Today
pnpbegda = c_date1.
pnpendda = sy-datum.
ELSEIF pnptimr5 = c_x. " From Today
pnpbegda = sy-datum.
pnpendda = c_endda.
ELSE.
IF ( pnpbegda IS INITIAL AND pnpendda IS INITIAL ).
pnpbegda = c_date1.
pnpendda = c_endda.
ELSEIF pnpbegda IS INITIAL AND NOT pnpendda IS INITIAL.
pnpbegda = c_date1.
pnpendda = pnpendda.
ELSEIF NOT ( pnpbegda IS INITIAL AND pnpendda IS INITIAL ).
pnpbegda = pnpbegda.
pnpendda = pnpendda.
ENDIF.
ENDIF.
ENDFORM. "get_period
*& Form get_pers_data
Get the Absence and Quota Data from PA0001,PA2001,PA2006
FORM get_pers_data.
DATA: lv_year1(4) TYPE n,
lv_year2(4) TYPE n,
lv_date1 TYPE sydatum,
lv_date2 TYPE sydatum,
lv_anzhb TYPE ptm_quonum. " Last Year Balance days
Get data from Respective Infotypes
rp_provide_from_last p0001 space pnpbegda pnpendda.
Absence Data
LOOP AT p2001 WHERE pernr = pernr-pernr AND
begda GE pnpbegda AND
endda LE pnpendda.
IF p2001-awart IN s_awart.
i_2001-pernr = pernr-pernr.
i_2001-subty = p2001-subty.
i_2001-awart = p2001-awart.
i_2001-abrtg = p2001-abrtg.
i_2001-begda = p2001-begda.
i_2001-endda = p2001-endda.
READ TABLE p0001 WITH KEY pernr = p2001-pernr.
i_2001-ename = p0001-ename.
Get the Absence Type Text
CLEAR gv_atext.
SELECT SINGLE atext INTO gv_atext FROM t554t
WHERE sprsl = sy-langu AND
moabw = c_moabw AND
awart = p2001-awart.
IF sy-subrc = 0.
i_2001-atext = gv_atext.
ENDIF.
APPEND i_2001.
CLEAR i_2001.
ENDIF.
ENDLOOP.
Quota Data
LOOP AT p2006 WHERE pernr = pernr-pernr AND
begda GE pnpbegda AND
endda LE pnpendda.
IF p2006-ktart IN s_ktart.
i_2006-pernr = pernr-pernr.
i_2006-subty = p2006-subty.
i_2006-begda = p2006-begda.
i_2006-endda = p2006-endda.
i_2006-year = p2006-endda+0(4).
i_2006-ktart = p2006-ktart.
i_2006-anzhl = p2006-anzhl.
i_2006-kverb = p2006-kverb.
i_2006-anzhb = p2006-anzhl - p2006-kverb.
READ TABLE p0001 WITH KEY pernr = p2001-pernr.
i_2006-ename = p0001-ename.
Get the Quota Type Text
CLEAR gv_ktext.
SELECT SINGLE ktext INTO gv_ktext FROM t556b
WHERE sprsl = sy-langu AND
mopgk = c_mopgk AND
mozko = c_mozko AND
ktart = p2006-ktart.
IF sy-subrc = 0.
i_2006-ktext = gv_ktext.
ENDIF.
APPEND i_2006.
CLEAR i_2006.
ENDIF.
ENDLOOP.
For Vacation Quota (80) get the Balance of the Last Year and
add to the Current Year Quota
LOOP AT i_2006.
IF i_2006-ktart = '80'.
lv_year1 = i_2006-endda+0(4).
lv_year2 = lv_year1 - 1.
CONCATENATE lv_year2 '01' '01' INTO lv_date1.
CONCATENATE lv_year2 '12' '31' INTO lv_date2.
LOOP AT p2006 WHERE pernr = i_2006-pernr AND
begda GE lv_date1 AND
endda LE lv_date2 AND
ktart = '80'.
lv_anzhb = p2006-anzhl - p2006-kverb.
i_rep1-pernr = i_2006-pernr.
i_rep1-ktext = i_2006-ktext.
i_rep1-anzhl = p2006-anzhl.
i_rep1-kverb = p2006-kverb.
i_rep1-ename = i_2006-ename.
i_rep1-begda = p2006-begda.
i_rep1-endda = p2006-endda.
i_rep1-anzhb = lv_anzhb.
i_rep1-ktart = '80'.
i_rep1-year = lv_year2.
APPEND i_rep1.
CLEAR: i_rep1.
ENDLOOP.
ENDIF.
CLEAR: lv_year1, lv_year2,
lv_date1, lv_date2,lv_anzhb.
ENDLOOP.
SORT i_rep1 BY pernr ktart.
ENDFORM. "get_pers_data
*& Form append_data
Put the Absence and Quota Data into one Report Int Table
FORM append_data.
CLEAR: i_rep.
REFRESH: i_rep.
SORT i_2001 BY pernr awart.
SORT i_2006 BY pernr ktart year.
Move I_REP1 data into i_2006
LOOP AT i_rep1.
MOVE-CORRESPONDING i_rep1 TO i_2006.
APPEND i_2006.
CLEAR i_2006.
ENDLOOP.
Move the Absence and Quota Data into a final Int Table
LOOP AT i_2006.
i_rep-pernr = i_2006-pernr.
i_rep-ename = i_2006-ename.
i_rep-ktart = i_2006-ktart.
i_rep-anzhl = i_2006-anzhl.
i_rep-kverb = i_2006-kverb.
i_rep-ktext = i_2006-ktext.
i_rep-anzhb = i_2006-anzhb.
i_rep-year = i_2006-year.
CLEAR i_2001.
CASE i_2006-ktart.
WHEN '81'.
PERFORM get_2001 USING i_2006-pernr '1000' i_2006-year.
WHEN '50'.
PERFORM get_2001 USING i_2006-pernr '1002' i_2006-year.
WHEN '80'.
PERFORM get_2001 USING i_2006-pernr '1001' i_2006-year.
WHEN '56'.
PERFORM get_2001 USING i_2006-pernr '1003' i_2006-year.
WHEN '51'.
PERFORM get_2001 USING i_2006-pernr '1004' i_2006-year.
WHEN '52'.
PERFORM get_2001 USING i_2006-pernr '1005' i_2006-year.
WHEN '54'.
PERFORM get_2001 USING i_2006-pernr '1006' i_2006-year.
WHEN '53'.
PERFORM get_2001 USING i_2006-pernr '1007' i_2006-year.
WHEN '55'.
PERFORM get_2001 USING i_2006-pernr '1008' i_2006-year.
WHEN '57'.
PERFORM get_2001 USING i_2006-pernr '1009' i_2006-year.
WHEN '90'.
PERFORM get_2001 USING i_2006-pernr '2000' i_2006-year.
WHEN '58'.
PERFORM get_2001 USING i_2006-pernr '2001' i_2006-year.
WHEN '59'.
PERFORM get_2001 USING i_2006-pernr '2002' i_2006-year.
WHEN '91'.
PERFORM get_2001 USING i_2006-pernr '2003' i_2006-year.
ENDCASE.
IF sy-subrc <> 0.
APPEND i_rep.
ENDIF.
CLEAR i_rep.
ENDLOOP.
SORT i_rep BY pernr ktart year.
DELETE i_rep WHERE pernr = ' '.
ENDFORM. " append_data
*& Form display_qa_data
Display the Absence and Quota Data
FORM display_qa_data.
DATA: lv_flag, " New Flag
lv_tot2 TYPE ptm_quonum. " Absence Balance days
IF i_rep[] IS INITIAL.
MESSAGE i000 WITH 'No Data found'(014).
ELSE.
LOOP AT i_rep.
toggle color
PERFORM toggle_color.
IF lv_flag <> space.
NEW-LINE.
ENDIF.
AT NEW pernr.
READ TABLE i_rep INDEX sy-tabix.
WRITE:/1 sy-vline,2(8) i_rep-pernr,
10 sy-vline,11(40) i_rep-ename.
ENDAT.
AT NEW ktart.
READ TABLE i_rep INDEX sy-tabix.
WRITE: 1 sy-vline, 10 sy-vline,
51 sy-vline,52(25) i_rep-ktext.
ENDAT.
AT NEW year.
READ TABLE i_rep INDEX sy-tabix.
WRITE: 1 sy-vline, 10 sy-vline,
51 sy-vline,
77 sy-vline, 78(4) i_rep-year,
82 sy-vline, 83(11) i_rep-anzhl,
94 sy-vline, 95(25) i_rep-atext,
120 sy-vline,133 sy-vline,
144 sy-vline,
155 sy-vline,156(13) i_rep-anzhb,
169 sy-vline.
lv_tot2 = lv_tot2 + i_rep-anzhb.
ENDAT.
WRITE: 1 sy-vline, 10 sy-vline,
51 sy-vline, 77 sy-vline,
82 sy-vline, 94 sy-vline,
120 sy-vline,121(12) i_rep-abrtg NO-ZERO,
133 sy-vline,134(10) i_rep-begda NO-ZERO,
144 sy-vline,145(10) i_rep-endda NO-ZERO,
155 sy-vline,169 sy-vline.
NEW-LINE.
AT END OF pernr.
WRITE : /1(169) sy-uline.
SUM.
FORMAT COLOR 3.
WRITE:/1 sy-vline, 10 sy-vline,
51 sy-vline, 77 sy-vline,
82 sy-vline, 94 sy-vline,
120 sy-vline,121(12) i_rep-abrtg,
133 sy-vline,144 sy-vline,
155 sy-vline, 156(13) lv_tot2,
169 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(169) sy-uline.
CLEAR lv_tot2.
ENDAT.
ENDLOOP.
ENDIF.
ENDFORM. " display_qa_data
*& Form display_q_data
Display only the Quota Data
FORM display_q_data.
DATA: lv_flag. " New Flag
SORT i_2006 BY pernr ktart year.
IF i_2006[] IS INITIAL.
MESSAGE i000 WITH 'No Data found'(014).
ELSE.
LOOP AT i_2006.
Toggle Color
PERFORM toggle_color.
IF lv_flag <> space.
NEW-LINE.
ENDIF.
AT NEW pernr.
READ TABLE i_2006 INDEX sy-tabix.
WRITE: /1 sy-vline, 2(8) i_2006-pernr,
10 sy-vline,11(40) i_2006-ename.
ENDAT.
AT NEW ktart.
READ TABLE i_2006 INDEX sy-tabix.
WRITE: 1 sy-vline,10 sy-vline,
51 sy-vline,52(25) i_2006-ktext.
ENDAT.
AT NEW year.
READ TABLE i_2006 INDEX sy-tabix.
WRITE: 1 sy-vline, 10 sy-vline,
51 sy-vline,
77 sy-vline,78(4) i_2006-year,
82 sy-vline,83(11) i_2006-anzhl,
94 sy-vline,95(13) i_2006-anzhb,
108 sy-vline.
NEW-LINE.
ENDAT.
AT END OF pernr.
WRITE : /1(108) sy-uline.
SUM.
FORMAT COLOR 3.
WRITE: /1 sy-vline, 10 sy-vline,
51 sy-vline,
77 sy-vline, 82 sy-vline,
94 sy-vline, 95(13) i_2006-anzhb,
108 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(108) sy-uline.
ENDAT.
ENDLOOP.
ENDIF.
ENDFORM. " display_q_data
*& Form display_a_data
Display Only the Absence Quota
FORM display_a_data.
DATA: lv_flag. " New Flag
SORT i_2001 BY pernr awart.
IF i_2001[] IS INITIAL.
MESSAGE i000 WITH 'No Data found'(014).
ELSE.
LOOP AT i_2001.
Toggle Color
PERFORM toggle_color.
IF lv_flag <> space.
NEW-LINE.
ENDIF.
AT NEW pernr.
READ TABLE i_2001 INDEX sy-tabix.
WRITE: /1 sy-vline, 2(10) i_2001-pernr,
10 sy-vline,11(40) i_2001-ename.
ENDAT.
WRITE: 1 sy-vline, 10 sy-vline,
51 sy-vline,52(25) i_2001-atext,
77 sy-vline,78(12) i_2001-abrtg,
90 sy-vline,91(10) i_2001-begda,
101 sy-vline,102(10) i_2001-endda,
112 sy-vline.
NEW-LINE.
AT END OF pernr.
WRITE : /1(112) sy-uline.
SUM.
FORMAT COLOR 3.
WRITE: /1 sy-vline, 10 sy-vline,
51 sy-vline,
77 sy-vline,78(12) i_2001-abrtg,
90 sy-vline,101 sy-vline,
112 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(112) sy-uline.
ENDAT.
ENDLOOP.
ENDIF.
ENDFORM. " display_a_data
*& Form header
Write the Report Header
FORM header .
data : lv_pers type pbtxt,
lv_orgn type orgtx.
gv_title1 = sy-title. " Set List Header
IF p_qa = c_x.
NEW-PAGE LINE-SIZE 193.
ELSEIF p_a = c_x.
NEW-PAGE LINE-SIZE 125.
ELSEIF p_q = c_x.
NEW-PAGE LINE-SIZE 119.
ENDIF.
Standard header
FORMAT RESET.
CALL FUNCTION 'Z_STANDARD_HEADER'
EXPORTING
title1 = gv_title1.
Get the Personal Area and Org.Unit Texts
clear : lv_pers,lv_orgn.
select single name1 into lv_pers
from t500p where persa = pnpwerks-low.
select single orgtx into lv_orgn
from t527x where sprsl = sy-langu and
orgeh = pnporgeh-low and
endda = c_endda.
if not lv_pers is initial.
write : /2 'Personal Area:'(017), 17(25) lv_pers color 7.
endif.
if not lv_orgn is initial.
write : /2 'Organization Unit:'(021), 20(25) lv_orgn color 3.
endif.
IF p_qa = c_x.
FORMAT COLOR COL_HEADING.
WRITE : /1(169) sy-uline.
WRITE:/1 sy-vline,2(8) 'Emp.No'(015) CENTERED,
10 sy-vline,11(40) 'Employee Name'(016) CENTERED,
51 sy-vline,52(25) 'Quota Description'(018) CENTERED,
77 sy-vline,78(4) 'Year'(027),
82 sy-vline,83(11) 'Entitlement'(019),
94 sy-vline,95(25) 'Absence Description'(022) CENTERED,
120 sy-vline,121(12) 'Absence days'(023),
133 sy-vline,134(10) 'From Date'(024),
144 sy-vline,145(10) 'To Date'(025),
155 sy-vline,156(13) 'Quota Balance'(020),
169 sy-vline.
WRITE : /1(169) sy-uline.
ELSEIF p_q = c_x.
FORMAT COLOR COL_HEADING.
WRITE : /1(108) sy-uline.
WRITE:/1 sy-vline,2(8) 'Emp.No'(015) CENTERED,
10 sy-vline,11(40) 'Employee Name'(016) CENTERED,
51 sy-vline,52(25) 'Quota Description'(018) CENTERED,
77 sy-vline,78(4) 'Year'(027),
82 sy-vline,83(11) 'Entitlement'(019),
94 sy-vline,95(13) 'Quota Balance'(020),
108 sy-vline.
WRITE : /1(108) sy-uline.
ELSEIF p_a = c_x.
FORMAT COLOR COL_HEADING.
WRITE : /1(112) sy-uline.
WRITE:/1 sy-vline,2(8) 'Emp.No'(015) CENTERED,
10 sy-vline,11(40) 'Employee Name'(016) CENTERED,
51 sy-vline,52(25) 'Absence Description'(022) CENTERED,
77 sy-vline,78(12) 'Absence days'(023),
90 sy-vline,91(10) 'From Date'(024),
101 sy-vline,102(10) 'To Date'(025),
112 sy-vline.
WRITE : /1(112) sy-uline.
ENDIF.
ENDFORM. " header
*& Form toggle_color
This routine alters the color of the records in the list
FORM toggle_color.
IF gv_dial = space.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
gv_dial = c_x.
ELSE.
FORMAT COLOR 1 INTENSIFIED OFF.
CLEAR gv_dial.
ENDIF.
ENDFORM. " toggle_color
*& Form get_2001
Get the ABsence type for each Quota type
FORM get_2001 USING p_pernr TYPE persno
p_value TYPE awart
p_year.
LOOP AT i_2001 WHERE pernr = p_pernr AND
awart = p_value AND
endda+0(4) = p_year.
i_rep-awart = i_2001-awart.
i_rep-abrtg = i_2001-abrtg.
i_rep-atext = i_2001-atext.
i_rep-begda = i_2001-begda.
i_rep-endda = i_2001-endda.
APPEND i_rep.
ENDLOOP.
ENDFORM. " get_2001
<b>Reward points for useful Answers</b>
Regards
Anji -
Not able to extract performance data from .ETL file using xperf commands.
Xperf Commands:
xperf –i C:\TempFolder\Test.etl -o C:\TempFolder\BootData.csv –a process
Getting following error after executing above command:
"33288636 Events were lost
in this trace.
Data may be unreliable
This is usually caused
by insufficient disk bandwidth for ETW lo
gging.
Please try increasing the minimum
and maximum number of buffers
and/or
the buffer size.
Doubling these values would be a good first at
tempt.
Please note, though, that
this action increases the amount of me
mory
reserved
for ETW buffers, increasing memory pressure on your sce
nario.
See "xperf -help start"
for the associated command line options."
I changed page size file but its does not work for me.
Any one have idea, how to solve this problem and extract ETL file data.I want to mention one point here. I have total 4 machines out of these 3 machines above
commands working properly. Only one machine has this problem.<o:p></o:p>
Hi,
I consider that you can try to use xperf to collect the trace etl file and see if it can be extracted on this computer:
Refer to following articles:
start
http://msdn.microsoft.com/en-us/library/windows/hardware/hh162977.aspx
Using Xperf to take a Trace (updated)
http://blogs.msdn.com/b/pigscanfly/archive/2008/02/16/using-xperf-to-take-a-trace.aspx
Kate Li
TechNet Community Support -
How to extract Inventory data from SAP R/3 system
Hi friends How to extract Inventory data from SAP R/3 system? What are report we may expect from the Inventory?
Hi,
Inventory management
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20handle%20inventory%20management%20scenarios.pdf
How to Handle Inventory Management Scenarios in BW (NW2004)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Loading of Cube
ref.to page 18 in "Upgrade and Migration Aspects for BI in SAP NetWeaver 2004s" paper
http://www.sapfinug.fi/downloads/2007/bi02/BI_upgrade_migration.pdf
Non-Cumulative Values / Stock Handling
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
Non-Cumulatives
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Here you will find all the Inventory Management BI Contents:
http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
2LIS_03_BX- Initial Stock/Material stock
2LIS_03_BF - Material movements
2LIS_03_UM - Revaluations/Find the price of the stock
The first DataSource (2LIS_03_BX) is used to extract an opening stock balance on a
detailed level (material, plant, storage location and so on). At this moment, the opening
stock is the operative stock in the source system. "At this moment" is the point in time at
which the statistical setup ran for DataSource 2LIS_03_BX. (This is because no
documents are to be posted during this run and so the stock does not change during this
run, as we will see below). It is not possible to choose a key date freely.
The second DataSource (2LIS_03_BF) is used to extract the material movements into
the BW system. This DataSource provides the data as material documents (MCMSEG
structure).
The third of the above DataSources (2LIS_03_UM) contains data from valuated
revaluations in Financial Accounting (document BSEG). This data is required to update
valuated stock changes for the calculated stock balance in the BW. This information is
not required in many situations as it is often only the quantities that are of importance.
This DataSource only describes financial accounting processes, not logistical ones. In
other words, only the stock value is changed here, no changes are made to the
quantities. Everything that is subsequently mentioned here about the upload sequence
and compression regarding DataSource 2LIS_03_BF also applies to this DataSource.
This means a detailed description is not required for the revaluation DataSource.
http://help.sap.com/saphelp_bw32/helpdata/en/05/c69480c357354a8846cc61f7b6e085/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/content.htm
These are the standard data sources used for Inventory extraction.
Hope this helps.
Thanks,
JituK -
How to extract PS data from sap r/3 to bw
Hi,
How to extract PS data from sap r/3 to bw
PS data like plans,budget,accurals&commitmnets
can any one help me regarding this..
Thanks in Advance,
Shankar.HI sankar,
you can refer the belkow link to find the details on the relevant extractors and infoproviders
http://help.sap.com/erp2005_ehp_04/helpdata/EN/17/416d030524064cb2b8d58ffb306f3a/frameset.htm
Regards,
Sathya -
I am new at writing vi's and hope you may be able to help. I would like to create a vi that will graph measurements taken from a daq device. I would like to include text data that a user can choose from (example: machine number, test circuit, load cell type) that will stay with the graph so when the graph is viewed at a later time the text data (explaining parts of the graph) will display with the graph data. I have included a vi I am using to capture and display a force value. Any help would be greatly appreicated.
Attachments:
force.vi 500 KBWhat you want is a DATALOG file:
When you save a file, use the BUNDLE function to bundle your machine number, test circuit, whatever (include a few spare fields), plus your graph data. Get the graph data from the source, or use a local variable of the graph itself.
Wire the bundle output to the DATALOG TYPE of a NEW FILE function. (I presume you'll use a FILE DIALOG set to SAVE FILE to choose a file path).
Write the same bundle output to the DATA input of a WRITE FILE function.
Use a CLOSE FILE function to (ahem) close the file.
When you want to read a file, use a FILE DIALOG set to EXISTING FILE (or some other means) to specify what file to read. Wire the same cluster type to the DATALOG TYPE of the FILE DIALOG, so that it will only
offer files of the correct type.
When you have a file path chosen, wire the bundle to the DATALOG TYPE input of a FILE OPEN operation.
Use a FILE READ to read a single cluster - the output of FILE READ will be a cluster of the right type.
Use a CLOSE FILE function to....
Out of the FILE READ function, you can UNBUNDLE BY NAME the data and send to the graph and the other fields, or, if you're clever, you can use a cluster on the screen, and not unbundle it. That's harder though, since you probably want the text fields to be controls (inputs) and the graph to be an indicator (output).
Hope that helps.
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks -
Infoobject change for extracting texts data.
Hi BW guys,
Here is my requirement.
I have one info object 'salesmen', which is already used in some other ODS & Cube's.
Now I want to extract texts data for the object 'salesmen', for that I will need to change my infoobject (changes are : adding credit control are object under compounding).
But while i am activating the info object again it is giving errors.
Error messages:
1) InfoObject XXXXX (or ref.) is used in data targets with data -> Error:
2) Characteristic XXXXX: Compound or reference was changed
3)InfoObject XXXXX being used in InfoCube XXXX (contains data)
etc....
But i don't want to delete the data in any data target.
Is there any way to solve this problem?
Thanks in advance......Hi,
If you have not many cubes and ODSs with this salesman, you can consider another, beter, but more time-consuming way.
1. Create a new IO for your salesman, add a compounding attribute as you want.
2. Load master data for the new IO.
3. Create copies of your infoproviders.
3. In each of them delete an old salesman IO and insert a new one.
4. Create export datasourses for old cubes.
5. Create update rules for new data targets based on old ones.
6. In URs map your new IO with the old one. All other IOs should be mapped 1:1 (new<-old).
7. Reload data targets.
That's all.
The way I proposed earlier is less preferrable. Because anyway you'll have to change loaded into data targets data. And in this case it's better to change data model as you want.
Best regards,
Eugene -
Error while extracting Vendor Data from R/3 system
Hi all,
I am trying to extract vendor data from R/3(ECC6.0) system to XI using Tcode MDM_CLNT_EXTR.
already I have maintained partner profile for the same.
I have given the necessary details like Creditor_extract,Target System and Distribution Mode as initial load.asusaully extraction process started and I found error in log file like"Table MASTER_IDOC_DATA is empty". Please help me if anyboday have idea about this.
Thanks in Advance,
Ravi.Hi Ravi,
you've got to set up the message type MDMRECEIPT for the Idoc distribution from R/3 to XI. Check chapter 5.2 in the IT configuration guide available on <a href="http://service.sap.com/installmdm">MDM Documentation Center</a>. It describes the necessary steps.
BR Michael -
Extraction of data from ECC to 3rd Party systems
Hi All,
I want to know all the options available for extracting data from ECC to a 3rd party system (custom datawarehouse like Teradata, hyperion etc). Also, I want know if there is a best practice documentation available for extraction of data from ECC to any 3rd party system?
Thanks,
SB.Hi SB,
Check the following link
http://expertisesapbi.blogspot.com/2010/06/how-to-transfer-data-from-sap-system-to.html
Ranganath. -
Extracting updated data from SAP R/3 to BOBJ DS
Hi all,
I have a doubt reg extracting updated data from SAP to BOBJ DS. For example i am extracting 50000 records from SAP table to BOBJ DS say its taking half an hour, after extracting data 10 more records have added in the same table. Do we need extract the whole record again or do we have some other way to extract only those 10 records from table.
Please help me. I have searched in forums but cudnt find the exact solution fyi.
Thanks,
GunaApart from stepd 1,2, you need to create a Target Data store and a table to load your MARA data.
3. Now the MARA data will be available in data store(DS_ERP), say table name as BO_MARA
Why do you want to change the table name? Are you planning to stage the data anywhere?
4. Create a dataflow source as BO_MARA, query transform and destination as a table
Data transport object is required if you are using R/3 Data Flow.
This would suffice just for a full load, if all your transformations can be incorporated inside the Query transform.
5. Do Transformation.
6. Transformed data will be available in target table.
Only after executing the job that the transformed "data" will be available in the target.
The above part mentions only about a Source, Query transform, Source Data Store and table.
Apart from these
You would require a Script object to write the condition, to SELECT the MAX timestamps. You would require Variables to be created in your job to redirect your job path and to restrict the data extracted.
Use your DataFlow in a Conditional object. If load type is first, in the then part use the dataflow which you might have already designed. Else part will have a replicated Data Flow with the above mentioned WHERE condtion in Query transform.
Suggest you to refer Desiger document and DI supplement for SAP as well. Inform if you are stuck.
Regards,
Suneer Mehmood. -
When extracting SD data from R/3, err in tRFC raised that "No service for."
Hello fellows,
when I'm extracting SD data from R/3, an error raised about IDOC that "No service for system SAPSB2, client 100 in Integration Directory", and there is no work processing working in the R/3 system, could anybody help? Thanks!
JenniferHi,
You are extracting Data from ECC, so here no way related to XI, I think, the problem is with Parner Profile and IDoc settings, so chek it in WE20.
or
take IDoc nos from BW-->RSMO (in the detailed tab bottom you can find OLTP IDoc nos) and then goto ECC, BD87 and give that IDoc and check,
And also check in WE05 what is the Idoc Statu, this is connection problem only, so check with BAsis team.
Thanks
reddy -
JSObject returns wrong date. How can I extract correct date from digital signature?
I'm trying to extract name and date from digital signatures by using JSObject in Excel VBA, but JSObject returns wrong date. Year, month, hour and minute are correct, but only day is incorrect.
Here is my code. I'm using Acrobat 8.1.3.
Please tell me what's wrong with this code and how I can extract correct date from digital signatures.
Public Sub sbTest()
Dim oApp As Acrobat.acroApp
Dim oPDDoc As Acrobat.AcroPDDoc
Dim jso As Object
Dim f As Object
Dim sig As Object
Dim strFileName As String
Set oApp = CreateObject("AcroExch.App")
Set oPDDoc = CreateObject("AcroExch.PDDoc")
strFileName = "C:\Test.pdf"
If (oPDDoc.Open(strFileName)) Then
Set jso = oPDDoc.GetJSObject
Set f = jso.getField("Signature1.0")
Set sig = f.signatureInfo()
Debug.Print sig.Name
Debug.Print sig.Date
End If
Call oPDDoc.Close
Call oApp.Exit
End SubHi
You can use TDMS file format to save the data. I have attached a reference Vi.
On button click you can log the data or remove the case structure and continuous log the complete acquisition data.
Thanks and Regards
Himanshu Goyal
Thanks and Regards
Himanshu Goyal | LabVIEW Engineer- Power System Automation
Values that steer us ahead: Passion | Innovation | Ambition | Diligence | Teamwork
It Only gets BETTER!!!
Attachments:
Data Save in File.vi 35 KB
Maybe you are looking for
-
when I go into Pogo to play my games many when load only show the chat for that game but no game appears I contacted pogo they went in said loads all the game just fine when I load on my desk top it loads ok and also when use internet explorer it loa
-
Pages 5.0 will not save documents created in Pages 09
I have hundreds of important documents I created and saved in Pages 09. I got a new Mac Mini running Mavericks 10.9.5 with the new Pages 5.0. The new Pages will not save my Pages 09 documents. Pages 09 will not save them either. Help!
-
How to conditionally encapsulate fields within ECC 6.0
I'm interested in strategies to conditionally encapsulate fields within ECC 6.0. The requirement would be to mask specific fields (e.g. Vendor Name) within a particular data set (e.g. a particular Company Code) by default while allowing those fields
-
How big of a difference is there between Mx 2004 and 8?
I was browsing around books on amazon and it looks like I could really get some mx 2004 books cheap on amazon. Would it be a good idea to save a few bucks and buy those books instead of getting newer books?
-
Artist : Zoot Woman Album: Things Are What They Used to Be Title: Lonely By Your SIde I've buy this Cd Album "Things Are What They Used to Be" - Zoot Woman and Itunes Don't download track named "Lonely By Your SIde" only and it gave me error 3259 wh