Extract the Pending Proposal which is not posted but not deleted F110

Dear Friends,
User has raised new requirement to extract the Pending proposal in F110 which is pending for final run but not deleted by user.
Please advice how can I extract the pending proposal which is pending for final run in F110.
Thanks in an advance.
Regards,
Pankaj

Hello Pankaj,
There are two mthods, first one is F110 > Edit > Proposal > Proposal List. Another way is SE16 > REGUH > input X selection criteria in input field REGUH-XVORL (Indicator: Only Proposal Run?) to list proposal pending for final payment.
Kind regards,
John Chin

Similar Messages

TS1702 I am trying to install an app on my ipad3 everytime it asks me the password for the apple Id which is fine but as well it does ask me for the 3security questions (Which is very weird) but not only that even after answering those questions app doesn

Any Help please

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

The new iTunes 12 does not have a rent tab. I've downloaded two movies which appear in the Movies folder on my Windows Explorer but not in the actual iTunes programme itself. Completely frustrating!

The new iTunes 12 does not have a rent tab. I've downloaded two movies which appear in the Movies folder on my Windows Explorer but not in the actual iTunes programme itself. Completely frustrating! Where can I find these two movies to watch? It asked me once it was downloaded if I wanted to watch it but I wasn't ready to and now can't find where to play these again.

When iTunes/iPod sync process failed due to timeout, the iPod, has only the initilaised filesytem structure at the start of the Sync.
The timeout failure could be due to
Bad hardisk - do the iPod disk diagnostic, refer to this excellent post by tt2
Slow USB port or resource - Dont use any USB hub, disconnect all other USB devices while syncing
Timeout due to Antivirus or other plugins - disconnect from Internet and stop the Antivirus or monitoribng software if you are syncing.
Preferably stop doing other things while syncing this ancient device, which the latest iTunes designer, think will soon be extinct.
Have a nice day!

Load the data for which these 2 fields are not initial (Blank).

Hi Experts,
I am extracting data from R/3 to BW using a Z data source based on view.
In the extract there will be 2 fields User ID & Date.
My requirement is to load the data for which these 2 fields are not initial (Blank).
My Data source is extracting all the data from R/3 to BW.How can filter it out in BW.
Thanks

Hi Siegfried,
Thanks for the info Provided.
As I am new to BW, Could you please provide me with the code (ABAP) I need to insert and where...in which part of the below start routine in need to insert the code....
My requirement is to load the data for which the USER ID (ZUSR_ID) & DATE (ZDATE) is not null/blank/0.
<b>Start Routine IN Transfer Rules</b>
Global code used by conversion rules
$$ begin of global - insert your declaration only below this line -
TABLES: ...
DATA:   ...
$$ end of global - insert your declaration only before this line   -
FORM STARTROUTINE
USING    G_S_MINFO TYPE RSSM_S_MINFO
CHANGING DATAPAK type TAB_TRANSTRU
           G_T_ERRORLOG TYPE rssm_t_errorlog_int
           ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel datapackage
$$ begin of routine - insert your code only below this line        -
DATA: l_s_datapak_line type TRANSFER_STRUCTURE,
      l_s_errorlog TYPE rssm_s_errorlog_int.
abort <> 0 means skip whole data package !!!
ABORT = 0.
$$ end of routine - insert your code only before this line         -
ENDFORM.
Thanks for the help.

Some songs, which are bought in the iTunes store, will be played iTunes but not on my iPod touch. Has somebody an explanation for that? Thanks,

Some songs, which are bought in the iTunes store, will be played iTunes but not on my iPod touch. Has somebody an explanation for that? Thanks,

No, you should have Restrictions OFF.
Computer's iTunes > Preferences > Parental Preferences > everything should be unchecked.
Are the songs also on computer's iTunes?

Cannot extract the embedded font 'F2'. Some characters may not display or print correctly.

This question was previously published but no answer has been found.
Error message is :
"Cannot extract the embedded font 'F2'. Some characters may not display or print correctly."
Many pdf documents display this error with Adobe Reader 8.1.0. We have errors for embedded fonts 'F0','F3','F7' and so on.
It looks like a Adobe Reader bug because :
- All PDF files can be opened with Acrobat Reader 5.0.5, 6.x and 7.x, can't be opened with 8.1.0 version.
- the 8.1.1 update removes only the bug for 'F0' error message (issue #1572280).
The solution :
- to publish a 8.1.2 update to fix this important bug
- is there a registry parameter or tool option to disable the checking added in 8.x version of Adobe Reader ? The 8.x version catches more errors to be compliant with Adobe specification but Adobe reader must be
compliant with all documents generated by third party products.
This Adobe Reader bug applies to Windows Vista, XP Pro SP2, 2000.
Thx,
Regards

Just to let you know, for anyone else with this problem. I had this problem occur on a MAC when you tried to do save to PDF in excel. This was all happening at the point of generation of the PDF in my case.
The fix was to delete ALL the microsoft preferences, but perahps only the font cache needed to be deleted.
I deleted the following areas from the local users userprofile on the mac. On windows, I would probably log in as a differnet user to try to see if the problem just exsists for one particular user.
Here are the sections I deleted:
Library/caches/metadata/Microsoft*
Username/library/preferences/com.microsoft* ( and anyhting with microsoft in it)
I did leave the entourage settings though.
hope it helps someone with a similar issue.

Cannot extract the embeded font 'KDGXKF+TTF5BC9A0t00'.Some characters may not display or print correctly.

I am currently using Adobe Reader version 9.1.3. When I open certain files, it displays the following message, "Cannot extract the embeded font 'KDGXKF+TTF5BC9A0t00'.Some characters may not display or print correctly". Some fonts are actually missing and will not display when printing. I have tried updating adobe but the problem still persists. Under file properites, the following font TTF5BC9A0t00 is recognised by Adobe as true type and custom encoding. Anyone has any suggestions for fix??
Cheers
RK

RK7.10.09 wrote:
Under file properites, the following font TTF5BC9A0t00 is recognised by Adobe as true type and custom encoding. Anyone has any suggestions for fix??
Cheers
RK
BUT, does it say "embedded" or "embedded subset" next to the font name. If not, the font isn't included in the file and if you don't have it, it can't display or print it.
The file creator will need to embed the fonts properly although "some" fonts don't allow embedding. This could be one of them.

InCopy workflow in InDesign: Is there a way to find the document in which an ICML file has NOT been checked IN again before saving the doc?

The situation:
We are working with the InCopy feature (checking in and checking out ICML files).
The problem:
I might have saved a document with an ICML file still checked out.
The question:
Is there a way to find out which document was saved with the ICML file still checked out?
or in other words:
Is there a way to find the document in which an ICML file has NOT been checked IN again before saving the doc?
Thanks for any help!

Hello Sumit Singh,
thank you for your answer and your reasonable recommendation. Unfortunately, this only works when the ICML content is used in one INDD file. In our case, we use ICML content in multiple docs (various manuals with the same safety instructions, warranties, adresses etc.).
So, is there a way to trace back where an ICML has been used?
Is it possible to find out in which document the ICML is still checked out?

After I optimize my pdf I get this error "Cannot extract the embedded font 'FONT NAME' Some characters may not display or print correctly.

After I optimize my pdf I get this error "Cannot extract the embedded font 'FONT NAME' Some characters may not display or print correctly.

This Acrobat forum may be a better place to ask: https://forums.adobe.com/community/acrobat/creating__editing_%26_exporting_pdfs

Cannot extract the embedded font 'EX_CFF_Arial_Black'. Some characters may not display or print corr

I have been getting the error....
Cannot extract the embedded font 'EX_CFF_Arial_Black'. Some characters may not display or print correctly.
I have tried to look online to figure this out but I have had no luck. If anyone has any suggestions to fix this I would love to hear them. Thanks!

Just to let you know, for anyone else with this problem. I had this problem occur on a MAC when you tried to do save to PDF in excel. This was all happening at the point of generation of the PDF in my case.
The fix was to delete ALL the microsoft preferences, but perahps only the font cache needed to be deleted.
I deleted the following areas from the local users userprofile on the mac. On windows, I would probably log in as a differnet user to try to see if the problem just exsists for one particular user.
Here are the sections I deleted:
Library/caches/metadata/Microsoft*
Username/library/preferences/com.microsoft* ( and anyhting with microsoft in it)
I did leave the entourage settings though.
hope it helps someone with a similar issue.

Cannot extract the embedded font 'FONT NAME' Some characters may not display or print correctly

After I optimize my pdf I get this error "Cannot extract the embedded font 'FONT NAME' Some characters may not display or print correctly.
Acrobat X 10.1.10
I am optimizing to create a smaller lores file to email .

I am not trying to remove the font.
I am trying to reduce the size of the file to email.
After optimizing the file this error pops up.
I have tried changing the setting for fonts but no success.

How can i check for posted but not yet commited changes in a form

Dears
I make changes programmatically in a form then i post it using (Post built in).
If the user exits the form, i make check for any changes in the form to commit it using the system variable :system.form_status
Unfortunately the value of this system variable is 'Query' not 'Changed' because of using the post built in.
Is ther another system variable ( or any another way ) that check for posted but not yet commited changes in the form ?
Thanks a lot
Mostafa Abolaynain

I had faced similar situation. Using of package variable which identifies, what is the user's latest action.
This is just a workaround.
Capture what the user has performed into a variable say, PKG_VAR.ACTION,
This will be assigned values like List L, and Create C, Update U and Saved S.
If commit is executed,assing the status S to the variable.
So while closing,
IF :system.form_status = 'CHANGED' or PKG_VAR.ACTION in ('C','U') THEN
-- validate the data, n perform commit.
else
-- just close the form.
end if;
Regards
Deepz : )

Block G/L Account for posting but not for parking

Hi all,
is there a possibility to customize a G/L account in a way that it is blocked for posting but not blocked for parking?
Kind regards,
Georg

Hi Georg-Stefan,
Directly, you cannot define such a thing. G/L blocking works on every posting level.
You can try, though, to pull a trick with a validation (OB28) checking on the BKPF-BSTAT field if it's not V - then block the posting. The prerequisites will be the G/L accounts, which can be organized in sets for better maintenance.
Regards,
Eli

SD report on sales which have been delivered but not yet billed

Dear all,
Do we have any SAP SD standard report showing a total of the value (preferably by sales office) of sales which have been delivered but not yet billed.
Client has a legacy system which shows report showed up goods which have been PGI'd/delivered but not invoiced - this is exactly what what is required in SAP report.
Thank you in advance,
Sastry

Sastry,
I have used this report "Sales office Analysis- Invoiced Sales - MC-E"
I found something on this forum i.e
VL06F - general delivery list / List of outbound deliveries,
VL06T - outbound deliveries for transportation planning
I dont know if it is useful in any way.
Sridhar.

Hello everyone ,i have macbook and macbook pro 15,so my question is can i use magsafe 60v charger to charge my macbook pro which having 85v magsafe but not in working condition.

hello everyone ,i have macbook and macbook pro 15,so my question is can i use magsafe 60v charger to charge my macbook pro which having 85v magsafe but not in working condition.

mangesh171 wrote:
my question is can i use magsafe 60v charger to charge my macbook pro which having 85v magsafe but not in working condition.
No.
Power Adapter/ cord wattage
“Power adapters for Intel-based Apple notebooks are available in 45W, 60W, and 85W varieties. Although you should always use the proper wattage adapter for your Apple notebook, you can use an adapter of a higher wattage without issue.”
http://support.apple.com/kb/HT2346
Best.

Extract the Pending Proposal which is not posted but not deleted F110

Similar Messages

Maybe you are looking for