Extract the photo in ArchiveLink and save the file in a path of the server

Hi all,
I need extract the photo file in SAP HCM, object HRIEMPFOTO, and save as a file in a path of the application server, can someone help me how can I do??
thanks!!!
Best Regards,
Félix

Hi Felix,
You should use archive link to upload employee photos by using OAXX transactions. In transaction PA30, you can use Extract->Dispaly all facsimiles to display the photo. Please find further information in the online help :
http://help.sap.com/saphelp_40b/helpdata/en/e9/81d15d449611d189700000e8322d00/frameset.htm
Hope it helps,
Kind Regards
Christine

Similar Messages

  • I just bought a MBA and I need to move my photos and itunes to an external hard drive (from my old MacBook Pro) because they won't fit on the Air.  I got the photos moved fine and I followed an online tutorial to move the necessary files for itunes, but i

    I just bought a MBA and I need to move my photos and itunes to an external hard drive (from my old MacBook Pro) because they won't fit on the Air.  I got the photos moved fine and I followed an online tutorial to move the necessary files for itunes, but it didn't work.  The files copied fine, but when I tell iTunes on the Air to look at the external drive for the library, it doesn't find anything.  What I copied was the entire iTunes Media folder.  So, how do I move the necessary iTunes files from my old Pro to a external drive so I can access them from my new Air?  Whew!

    iTunes- How to move the library to an EHD
    After you move the library you need to open iTunes by first depressing the OPTION key then launching iTunes. You will be given a choice of which library to use. This can then be made a permanent change, if you wish, in the Advanced section of iTunes preferences.

  • How to increase the camera download speed and save binary file speed

    My camera is pco dimax S1 camea. The interface is cameralink Base.
    The memory is on board.
    I use 1000fps@480*480 resolution to capture 1 sec.
    Then download the images from the on board memory to computer.
    The board in the PC side is NI-1429 board.
    Theory, the cameralink transport speed should be 250MB/S
    In the file format, file size should be (480(H)*480(V)*16bit*1000fps)/8=460.8 MB
    Logically it should be download complete under 2 sec
    But in my program, the real download speed at about 40 framess/s, (480*480*16*40)/8=18.432 MB/S
    (250MB/S)/(18.432MB/S)= 13.85
    The download speed is totally slower 13.8 times.
    I use the SSD and RAID 0 to save the file.
    I did some test as below:
    1. Try to save png or binary file. The speed of binary had a litter faster, but it still doesn't close the 250MB/S.
    2. I try to adjust the resolution from 16bit to 12bit or 8bit to save the image. The download speed still 40 frames/s(18.432MB/S)
    3. I try to use IMAQ Sequence to save the file, but how to add in my program, can anyone help me?
    On the other hand, I also guess may be the structure of my program have an problem cause the download and save speed slow.
    Attached please find the program.
    To see if there are other ways to increase the speed of file written!
    Attachments:
    Imagesavebinary.vi ‏91 KB
    test.png ‏157 KB

    You have to separate your step1 and step2 into two parallel loop.
    If you put the two tasks in one loop, the lower speed task will affect the loop speed.
    So that the program won't achieve the top speed.
    Is continuous acquisition required for your application? Can sequence acquisition or finite acquisition be your workaround?
    The memory handling in continuous acquisition is way a lot more difficult than finite acquisition.
    I would suggest you to figure out how finite acquisition work and then jump into the continuous acquisition application.

  • Imported photo's from my camera, after the import the photo's dissapear and now I have a palm tree in the events window.

    Imported photo's from my camera, and after making adjustments to the photos in iPhoto an error message appeared and now in the events box, there are no pictures just a gray and black palm tree photo. Any thoughts?

    Sure - tell us the error message
    LN

  • What is the difference between pause and save in Hyper-V?

    hi,
    What is the difference between pause and save in Hyper-V?
    What are the benefits of using each function?
    Thanks

    WHen you save VM, Hyper-V saves VM state to disk and frees all memory and CPU resources used by VM. When you pause a VM, Hyper-V saves VM cpu state in memory, and then stops VM's cpu processes without releasing its memory. Since no disk operations are involved,
    pausing and resuming can be done much faster than saving and restoring a VM.
    Gleb.

  • In IPhoto or IPad, when I edit a photo in an existing album, the photo is removed and placed in a new album with only edited photos. How do I keep it in or get it back to its original album?

    When using IPhoto for IPad, can I move photos from one album to another? For instance, when I edit a photo in an existing album, the photo is removed and placed in a new album with other edited photos. How do I keep it in or move it back to its original album?

    That will depend on the kind of album your photo is in.
    Most albums in iPhoto are created automatic by the way you are using and editing your photos, see: http://help.apple.com/iphoto/ipad/1.1/#blnkb9b1e2a
    When you edit your photo, the edited copy is added to the automatic "edited" album and the view switches to he edited album. But the photo should stay in its original album - do you see something different? Only if you want the edited photo in the camera roll and the photo strea as well, you have to save the edited copy to the camera roll again after editing, otherwise the camera roll will show the original and not the edted version.

  • After userA check out a page, edit the page and save, Sharepoint prompt userA have checked out the page

    In one of site collection at our SP2013 farm, we have "SharePoint Server Publishing" site feature and "SharePoint Server Publishing Infrastructure" site collection feature activated.
    One of user (UserA) create a page in a page library. The new page is marked as "checked out by UserA". It is fine.
    Then UserA open the page -> edit page -> key in something and "save". Then the page prompt him "The file Pages/subfolder/test001.aspx has been modified by i:0#.w|test\userA on 8Aug2014 xx:xx:xx" and ask him to choose "Leave
    this page" or "say at this page".  The date time is exactly the time he was editing the page.
    Whatever he choose will save the page and return to "View" mode (non-edit mode).
    It is not the only problem. When userA want to edit the same page again and save, it prompt him that "The page could not be saved because your changes conflict with recent changes made by another user. If you continue, your changes will be lost."!
    When userA choose continue or "check out". Follow screen show up:
    What can we do? In summary, userA cannot edit a page because userA have checked out! We have tried for different users have exactly same issue.

    We are having the same problem, the one thing we have found is if we use the Save Icon on the top right hand side of the page in the ribbon (next to follow), that Save works just fine.  What is causing the issue is when trying to use the Save Icon on
    the left hand side of the ribbon that has the dropdown options to 'Save', 'Save and Keep Editing' or 'Stop Editing'.  It doesn't matter if you just click on the main Icon or choose any of the dropdown options, they all cause issues with the pages.  
    Thoughts?
    Nick Hurst

  • Lightroom will not import my photos.   It did up to a week ago.   I have changed cards and cameras (both worked two weeks ago).   I can import the photos to Picasa and iPhoto

    Lightroom will not import my photos.   It did up to a week ago.   I have changed cards and cameras (both worked two weeks ago).   I can import the photos to Picasa and iPhoto.   I get the following error message:  
    Some import operations were not performed.
    The following files were not imported because they could not be read  [followed by a list of the files I wanted to import]
    Thumbnails show up.  LR just will not import them.
    Any idea what is going wrong?

    If the Import button is not clickable, that means that Lightroom thinks you have no new photos to import (one possible reason is that they are duplicates)
    So, you need to figure out why Lightroom thinks that. The way I would do this is to search your Library module for at least one of the photos, by file name. To do this, you would follow all 4 of these steps in sequence:
    Click on All Photographs in the Catalog Panel on the left of the Library Module
    Turn off all Filters (Ctrl-L or Cmd-L once or twice)
    Expand all stacks: Photo->Stacking->Expand All Stacks
    Search for one or more of the photos using the Filter Bar (press backslash), search by File Name

  • I recently updated my macbook, i don't know if that has any effect to my recent problem, but when i try to download and save .mp3 files from the internet, like i have done in the past, it downloads but not as an mp3 file, its "blank"

    i recently updated my macbook, i don't know if that has any effect to my recent problem, but when i try to download and save .mp3 files from the internet, like i have done in the past, it downloads but not as an mp3 file, its "blank" and when i try to open it, i can't? I NEED HELP !

    Here is the download page

  • Is there any way to recover files when the back up catalog has been deleted accidently.  I can see a preview of the photos, but I cannot access or edit them.  They say "the folder cannot be located" and "the photo is missing".  I have gone through multipl

    I can see a preview of the photos, but I cannot access or edit them.  They say "the folder cannot be located" and "the photo is missing".  I have gone through multiple Adobe tutorials to try and recover them to no avail.  Any tips?

    Backup catalogs wouldn't have helped with this problem anyway, but naturally, you shouldn't delete backup catalogs for a while.
    The solution to reconnecting the folders is given here: Adobe Lightroom - Find moved or missing files and folders

  • How can I print multiple copies of the same photo onto one sheet of paper?  Do I have to Duplicate the photo in iPhoto and then select them all?

    How can I print multiple copies of the same photo onto one sheet of paper?  Do I have to Duplicate the photo in iPhoto and then select them all?

    no - you simply have to select the option to print mucliples of a photo on a page
    select the photo and go to the file menu ==> print - select the printer, paper size and print size and click customize - in the tool bar click on the settings icon (the gear looking thingy) and select "multiple of the same photo per page" and the preview will reflect this option showing a full page of the selected size photos
    LN

  • I deleted the photos via Finder and empty trash long time ago. The thing is, that I want to recover one event or album.  The event appears in the iphoto but when open, it shows "!". Is it possible to recover the photos?

    I deleted the photos via Finder and empty trash long time ago. The thing is, that I want to recover one event or album.  The event appears in the iphoto but when open, it shows "!". Is it possible to recover the photos?

    No.  When you removed the photos via the finder you damage the library.  Photos should always be removed from the library using iPhoto, never with the Finder.
    If you have a Time Machine backup of the library from before you deleted the photos you can restore the library to the Desktop and export that album from it to import into your current library.
    It's been too long to be able to try one of the file recovery applications.  You sure to have overwritten those files with new files since them.
    OT

  • When I set all the tracks in the latest Garageband to the same volume levels and save, when I open the file again they've changed back to a previous setting?

    I'm trying to mix a recording in the latest 2014 version of Garageband, but when I set all the tracks in the latest Garageband to the same volume levels and save, when I open the file again they've changed back to a previous setting? Does anyone know why it changes even after saving the file?
    Below is my iMac settings.

    Do you have a back up?
    If not you're into using file recovery software like  File Salvage - you can download a free trial and it will scan the disk for you and tell you with might be recoverable. Actual recovery will require that you purchase the app. There may be many files with the same or similar names. Always recover the largest file size.
    There are other such apps. Search on Macupdate or the App Store

  • Not sure if anyone can help but I have a copy of Photoshop CS5.1. Ever since it was installed, every now and again when I try do something simple like save a file or scale something using the Transform tool, in fact anything at all it comes up with "Could

    Not sure if anyone can help but I have a copy of Photoshop CS5.1. Ever since it was installed, every now and again when I try do something simple like save a file or scale something using the Transform tool, in fact anything at all it comes up with "Could not complete your request because of a program error". Have thought about re-installing  it but I have lost my serial number.  I'm living in Ireland and trying to get to talk to someone in tech support is a complete joke. Any ideas what to do ? Thanks

    Ianp69549740 have you tried reinstalling Photoshop CS5.1?  If so do you receive any specific errors?  What operating system are you using?

  • Is it possible to create and save a .PDF without any compression to the resulting .PDF?

    I need an uncompressed file so I can use the resulting PDF to do a find/replace. Can't do it with compression.
    Thanks
    JDRHC1115

    Dave,
    Thanks for the reply. Of all the suggestions I've received this seemed to
    be most promising. I gave it a try and the problem is that when I attempt
    to save as optimized a message box pops up and says I have to save my
    document first. Low and behold when I save it, compression occurs. Even
    when I select the options you suggest I'm left with a compressed document.
    I'm using Acrobat Pro X
    Jeff
    From:   Dave Merchant <[email protected]>
    To:     Jeff Ross <[email protected]>
    Date:   01/06/2011 09:35 AM
    Subject:        Is it possible to create and save a .PDF
    without any compression to the resulting .PDF?
    You don't want the UncompressPDF plugin - that's designed to split out the
    COS objects but doesn't remove the Flate encoding (plus if you've never
    compiled a plugin before, it's not really the time to learn).
    Instead, simply save your PDF file using the PDF (Optimized) file type,
    click the Settings button and under "Clean Up" - "Object compression
    options", choose "Remove compression". Turn everything else off if you
    want to retain the PDF content exactly as it was before.
    Your document-level scripts will then be in the file as plain text.

Maybe you are looking for

  • Creation of new version in Controlling

    Hello FI experts, I am trying to create a new version in controlling thru tcode OKEQ, when I try to go Settings for each fiscal year it tells me that version ... #  Ia does nto exist in table TK09. am I missing a privous step? thank you for your help

  • Windoes 8 flash player installed but youtube videos not working?

    I brought a laptop that already came with windows 8 installed on it and adobe flash player. it says i have adobe flash player and there are no problems with it but when i play youtube videos its just instead of the box where the video should be its j

  • Connecting directly to Macbook Air

    I just purchased a Time Capsule, and successully did a backup using my router. But is there a way to connect the Time Capsule directly to my Macbook Air? There isn't a Ethernet slot on the laptop.

  • Ask about role base authentication

    I want create login with role base authentication, but i still confuse with some tutorial that i found in google can somebody give me good reference, because i don't understand with how is the step setting in the xml like login-config.xml etc thx

  • Can I safely install CS4 alongside CS3

    Hi all We have a couple of jobs out on proof at the moment that were done in IDCS3. We are moving to CS4 and I want to know if it is safe to install CS4 on a Mac that has CS3 - will we still be able to run CS3 when the CS3 jobs come back? I know we c