Extract thumbnails from PE7 Organiser

Recently an external drive failed irrecoverably and I lost a lot of photographs. However, even though the photos are no longer on the system, PE7 Organiser still displays thumbnails of them. I want to extract these from Organiser into separate thumbnail-sized jpegs (or whatever) so that I have a low-res record of the pictures I have lost. Obvously I can store each pageful on the clipboard and manually crop each thumbnail out and save it, but I had hoped there was a more efficient way. I can program in VB and C++ so if I can locate the file in which the thumbnails are stored, I can probably write something to extract them.
Can someone tell me where PE7 Organiser stores the thumbnails?

@dj_paige:
Hmmm... well, if PE can read the cache file, then so can any program that knows how the file is laid out - but finding that out might be quite a task, unless some helpful Adobe employee can point me to the appropriate literature!

Similar Messages

Deleting thumbnails from Organiser

If I delete thumbnails from the Organiser main window, the same thumbnails are also deleted from my Collections and tagged files.
Is it necessary for the Organiser to work that way or am I missing something? I just wanted to have less thumnnails to scroll through and once they are tagged it seemed logical to delete the thumbnails from the main window.
Thanks
John

John,
In addition to suggestions such as using a Show tag, it seems that for some cases the Find menu choice of "find untagged items" might be useful for you.
Another general comment is that you probably do not want to place all photos in Collections. I use Collections to make specific arrangements of photos for specific purposes like a slide show. If I have photos from an event like a family birthday party, I make a Tag for the event and then also apply people tags. Only when I am ready to use the photos for something like a slide show where I also want to control sequence, do I make a Collection.
Sometimes people start by using a Collection instead of a Tag for an Event. A Tag has more flexibilty for searching and is therefore almost always better for identification of the photos.
Barb O

Extract thumbnail images from a cache file without originals?

After an external drive crash, I'm left with only the Bridge (CS2) cache files for a folder full of images. Does anyone know a way to extract the thumbnails from the cache as jpgs or some other standalone format when you *don't* have the original image files? They would be low-res, but better than nothing. Thanks in advance.

>>says that this export technique does not work, it produces a low res screen version of the file.
Are you certain the original files were any better?
My preferred method of doing this works well, but it takes a few extra steps. I'd make a high-res PDF out of the PM file, then pick apart the PDF to extract the graphics. Are the graphics raster or vector? If they're raster, you can use Acrobat's Touch-up Object tool to open them in Photoshop. If they're vector, you can open the PDF in Illustrator and save out the graphics from there.
HTH

How do I extract pages from a PDF?

I am trying to extract pages from a pdf document through Adobe XI and the command is not there through page thumbnails or through tools. What can I do? We have the current version which I verified through checking for updates.
[Please choose only a short description for the thread title.]
Message was edited by: Jim Simon

"Adobe XI" does not exist.
There is Acrobat XI (Standard or Pro).
There is Adobe Reader XI.
Acrobat XI Pro (and maybe Standard) can extract pages from a PDF.
Adobe Reader XI cannot extract pages from a PDF.
Once either application is open it is easy to determine which you have open.
The "name" is in the top most "ribbon" of the application window.
From what you've written it appears that you are using Adobe Reader XI.
Be well...

Best way to extract data from 2 years records/Numbers files for tax return?

Hi
I am wanting to find a way of generating my annual tax returns from my financial records, which will be stored in a separate Numbers file for each Calendar Year.
As the Tax Year (in the UK) is different from the Calendar Year (in the UK it runs from April 6 to April 5), I would need to extract information from two different Numbers files, to a third Numbers file. Is it possible to do this, and would this be relatively straightforward?
I'd be interested to hear from others who have used Numbers for a similar purpose, and how they have organised things.
Thanks
Nick

The easiest soluce is to forget the use of separate documents.
Use one sheet per year and it will be really easy to achieve your goal using only formulas.
With separate documents, the unique soluce is to use an AppleScript.
I may write one but I'm a bit tired because I posted a lot of such soluce and in most cases, I don't know if they give satisfaction to the askers.
Coding for the clouds isn't my cup of tea so I think that for some days, I will leave AppleScript and will work upon the archives of my workshop.
Yvan KOENIG (VALLAURIS, France) mercredi 4 août 2010 19:15:58

FCP keeps crashing when loading thumbnails from bin

Hey folks,
I am having constant issues where FCP keeps crashing when I load a bin with thumbnails. This doesn't happen every time I open a bin, but after I open say 6 or 7 bins. After the research I have done I have come to a couple of possible solutions 1= this previous post
http://discussions.apple.com/message.jspa?messageID=9545404#9545404
The only thing that is stopping me from trying this procedure is I don't have another Mac with the VADriver, so I have to extract it from the OS DVD, which is fine thanks to the Pacifist program which makes it easier, but I don't know how to get the specific file extracted.
I also noticed that the guy who solved the same issue with this procedure has an older OS to mine, so surely with the new OS the problem would have been resolved??
2= the other solution seems to be to put the footage onto a hard drive with a faster connection other than firewire 800. But this doesn't seem right to me because the project worked perfectly fine on the old PowerPC Mac using the same external FW800 drives I am using on this computer.
I would appreciate any advice. at this point I am probably wasting around 1-2 hours a day with FCP crashing and having to reopen the project to work on it again.
Anyone having similar issues?

Here's what the fabulous Crash Analyzer says about it:
*MPEG Media*
This crash appears to have been caused by MPEG media (or MPEG-derived media such as XDCAM, HDV or H.264) in the timeline. MPEG-based media is not recommended for editing in Final Cut Pro.
*Suggested Actions*
Set the codec of your sequence to ProRes in Sequence Settings.
Alternatively, and for best results, transcode any HDV, MPEG-2, XDCAM, AVCHD, H.264 or other long-GOP media into an editing-friendly format such as ProRes or Apple Intermediate Codec (AIC).
*Relevant Line*
0 QuickTimeH264.scalar 0x0f7114d7 JVTCompEncodeFrame + 2769062
Report generated by Crash Analyzer in FCS Maintenance Pack
You can download a fully working demo of Crash Analyzer from Digital Rebellions website ... and then you should buy it! Its worth every penny.

Unable to extract data from an AS/400 system.

Hello experts.
We are trying to extract data from an AS/400 system but not having any success until now.
I´ll write down you the stepts that we have followed until now:
1.- Create a DB Connect between both systems
2.- Create a Source System from AS400 in the workbench under DB Connect Directory
3.- Generate datasources from tebles specified in the schema of the connection
break point -
At this point, we had a problem with some tables with at least one fieldname containing character "Ñ".
After asking some possible solutions to SAP, the told us this is not supported, as the system can´t have any object with character "Ñ", so the transfer structure was unable to activate with this fields in the datasource.
--- end of brek point --
4.- After those issues, we´ve decided to implement, in another schema, views from those tables which had the fieldnames with that character "Ñ", changing them to an "N".
5.- We´ve created another source system with that schema, and user than can see that schema.
6.- To be able to see those views, in transaction RSDBC, we had to deactivate the two checkboxes in the first window ( Choose tables and Choose views) .
7.- Right afeter, we could generate correctly the datasources from this logical tables.
8.- We have designed the hole dataflow for this datasources and everithing went rigth.
9.- But wen we tried to execute the infopackage to extract data from those logic tables, we cannot get any registers. Acctualy the charge remains yellow after the job have finished.
Please, I would appreciate any help you could give us on this problem.
Thank you very much
Regards
Joaquin

I´d like ti add something to this thread, and maybe clarify a littel bit the question.
The only way that the BW system recognizes those logical tables, through transaction RSDBC is checking out the two boxes on this transaction, "Select Tables" and "Select Views".
I don´t know haw these logical tables have been created, bus does this mean that the are not neither tables or views as BW understand them.
Please, if someone knows anythin about this, answer to this thread.
Thank you very much.
Joaquin Sobrido

Extracting Data from APO PP/DS to BW

Hi Gurus,
I'm trying to extract data from APO PP/DS (SCM 5.1) to BW (BI 7.0). I'm new to SCM and am not sure how the extraction from SCM to BI happens other than that we need to read data from LiveCache.
The extractor we are interested are
0APO_PPDS_RESCAPREQ_01
0APO_PPDS_PROD_CUST_01
0APO_PPDS_OPERATION_01
0APO_PPDS_ORDER_01
Pls kindly help me out with the procedure.
Thanks in advance.

Hi
Have a look at the below urls..
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f229690-0201-0010-84ba-9ee5a8958a05
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4fe5d590-0201-0010-6c8d-ada86492cf11
Re: APO to BW Design Question
Re: APO BW Integration
Hope it helps
Thanks
Teja

What key fields should i set in DSO extracting data from 2LIS_02_ITM

hi experts
i extract data from 2LIS_02_ITM into a DSO, i know the DSO isn't a must, becoz the 2LIS_02_ITM delta type is ABR, but i want to keep the info in change log.
so, what the key fields should i set in the dso? just ebeln and ebelp is enough?
hunger for ur advice and thanks a lot!

If you extract ITM toa DSO you cannot maintain a log of every change....the data will come ....but when the data must be activated the reference of the ebelp ebeln will remain only a single record....if you want to maintain all the data you must create another field in extractor with you can difference all the changes for one single ebelp ebeln...
Regards

When I extracting data from DSO to Cube by using DTP.

When i am extracting data from DSO to Cube by using DTP.
I am getting following erros.
Data package processing terminated (Message no. RSBK229).
Error in BW: error getting datapakid cob_pro (Message no. RS_EXCEPTION105).
Error while extracting from source 0FC_DS08 (type DataStore) - (Message no. RSBK242).
Data package processing terminated. (Message no. RSBK229).
Data package 1 / 10/04/2011 15:49:56 / Status 'Processed with Errors'. (Message no. RSBK257).
This is the brand new BI 7.3 system. Implementing the PSCD and TRM.
I have used the standard business content objects in FI-CA (dunning history header, item,activities) and standard Datasource (0FC_DUN_HEADER ,0FC_DUN_ITEMS, 0FC_DUN_ACTIVITIES). I have extracted data till the DSO level . when I try to pull the data to info provider level(cube) using DTP . I am getting fallowing error.
my observation: when ever I use the DSO as source to any target like another DSO or cube. its throwing same kind of error for any flow including simple Flat file .
please suggest any one whether do I need to maintain basic settings since its a brand new BI 7.3.
please help me out on this issue . I am not able to move forward .its very urgent

hello
Have you solved the problem ?
I have the same error...
as you solve this error,
can you help me please I have the same error
yimi castro garcia
[email protected]

How to extract text from a PDF file?

Hello Suners,
i need to know how to extract text from a pdf file?
does anyone know what is the character encoding in pdf file, when i use an input stream to read the file it gives encrypted characters not the original text in the file.
is there any procedures i should do while reading a pdf file,
File f=new File("D:/File.pdf");
               FileReader fr=new FileReader(f);
               BufferedReader br=new BufferedReader(fr);
               String s=br.readLine();any help will be deeply appreciated.

jverd wrote:
First, you set i once, and then loop without ever changing it. So your loop body will execute either 0 times or infinitely many times, writing the same byte every time. Actually, maybe it'll execute once and then throw an ArrayIndexOutOfBoundsException. That's basic java looping, and you're going to need a firm grip on that before you try to do anything as advanced as PDF reading. the case.oops you are absolutely right that was a silly mistake to forget that,
Second, what do the docs for getPageContent say? Do they say that it simply gives you the text on the page as if the thing were a simple text doc? I'd be surprised if that's the case.getPageContent return array of bytes so the question will be:
how to get text from this array? i was thinking of :
    private void jButton1_actionPerformed(ActionEvent e) {
        PdfReader read;
        StringBuffer buff=new StringBuffer();
        try {
            read = new PdfReader("d:/getjobid2727.pdf");
            read.getMetaData();
            byte[] data=read.getPageContent(1);
            int i=0;
            while(i>-1){
                buff.append(data);
i++;
String str=buff.toString();
FileOutputStream fos = new FileOutputStream("D:/test.txt");
Writer out = new OutputStreamWriter(fos, "UTF8");
out.write(str);
out.close();
read.close();
} catch (Exception f) {
f.printStackTrace();
"D:/test.txt" hasn't been created!! when i ran the program,
is my steps right?

How to extract text from a PDF file using php?

How to extract text from a PDF file using php?
thanks
fabio

> Do you know of any other way this can be done?
There are many ways. But this out of scope of this forum. You can try this forum: http://forum.planetpdf.com/

[Forum FAQ] SharePoint 2013: Extracting values from a multi-value enabled lookup column and merge values to a multi-value enabled column

For some business requirements, users want to extract values from a multi-value enabled lookup column
and add items to another list based on each separate value. In contrast, others want to find duplicate values in the list and merge associated values to a multi-value enabled column and then
add items to another list based on the merged value. All of these can be achieved using SharePoint Designer 2013 Workflow.
How to extract values from a multi-value enabled lookup column and add items to another list based
on each separate value using SharePoint Designer 2013.
Important actions: Loop Shape; Utility Actions
Three scenarios
Things to note
Steps to create Workflow
How to merge values to a multi-value enabled column and add item to another list based on the
merged value using SharePoint Designer 2013.
Important actions: Call HTTP Web Service; Build Dictionary
Things to note
Steps to create Workflow
How to
extract values from a multi-value enabled lookup column and
add items to another list based on each separate value using SharePoint Designer 2013.
For example, they have three lists as below. They want to
extract values from the Destinations column
in Lookup2 and add items to Lookup3 based on each country and set Title to current item: ID.
Lookup1:
Title (Single line of text)
Lookup2:
Title (Single line of text), Destinations (Lookup; Get information from: Lookup1 in Title column).\
Lookup3:
Title (Single line of text), Country (Single line of text).
Important action
1. Loop Shape: SharePoint Designer 2013 support two types of loops: loop n times and loop with condition.
Loops must also conform to the following rules:
Loops must be within a stage, and stages cannot be within a loop.
Steps may be within a loop.
Loops may have only one entry and one exit point.
2. Utility Actions: It contains many actions, such as ‘Extract Substring from Index of String’ and ‘Find substring in String’.
Three scenarios
We need to loop through the string returned from the look up column and look for commas. There are three
scenarios:
1. No comma but string is non-empty so there is only one country.
2. At least one comma so there is at least two or more countries to loop.
3. In the loop we have consumed all the commas so we have found the last country.
Things to note
There are two things to note:
1. "Find string in string (output to Variable:index)" will return -1 if doesn't find
the searched for string.
2. In the opening statement "Set Variable: Countries to Current Item:Destinations" set the return
field as "Lookup Values, Comma Delimited".
Steps to create Workflow
Create a custom list named Lookup1.
Create a custom list named Lookup2, add column: Destinations (Lookup; Get information from: Lookup1 in Title column).
Create a custom list named Lookup3, add column: Country (Single line of text).
Create a workflow associated to Lookup2.
Add conditions and actions:
Start the workflow automatically when an item is created.
Add item to Lookup2, then workflow will be started automatically and create multiple items to lookup3.
See the below in workflow History List:
How to merge values to a multi-value enabled column and add item to another list based on the
merged value using SharePoint Designer 2013
For example, they have three lists as below. They want to find duplicate values in the Title column in
Lookup3 and merge country column to a multi-value enabled column and then add item to lookup2 and set the Title to Current Item: Title.
Lookup1:
Title (Single line of text)
Lookup3:
Title (Single line of text), Country (Single line of text).
Lookup2:
Title (Single line of text), Test (Single line of text).
Important actions
"Call HTTP Web Service"
action: In SharePoint 2013 workflows, we can call a web service using a new action introduced in SharePoint 2013 named Call HTTP Web Service. This action
is flexible and allows you to make simple calls to a web service easily, or, if needed, you can create more complex calls using HTTP verbs as well as allowing you to add HTTP headers.
“Build Dictionary"
action:
The Dictionary variable type is a new variable type in the SharePoint 2013 Workflow.
The following are the three actions specifically designed for the Dictionary variable type: Build Dictionary, Count Items in a Dictionary and Get an Item from a Dictionary.
The "Call HTTP Web Service" workflow action would be useless without the new "Dictionary" workflow action.
Things to note
The
HTTP URI is set to https://sitename/_api/web/lists/GetByTitle('listname')/items?$orderby=Id%20desc and the HTTP method is set to “GET”. Then the list will be sort by Id in descending order.
Use Get
d/results(0)/Id form
Variable: ResponseContent (Output to
Variable: maxid) to get the Max ID.
Use Set
Variable: minid to Current List:ID to get the Min ID.
Use Copy from
Variable: destianation , starting at
1 (Output to
Variable: destianation) to remove the space.
Steps to create Workflow
Create a custom list named Lookup1.
Create a custom list named Lookup2, add column: Test (Single line of text).
Create a custom list named Lookup3, add column: Country (Single line of text).
Create a workflow associated to Lookup3.
Add a new "Build Dictionary" action
to define the http request header:
Add a Call HTTP Web Serviceaction, click on
this and paste your http request.
To associate the
RequestHeader variable, select the Call action property,
set the
RequestHeaders property to
RequestHeader:
In the Call action, click on
response and associate the response to a new
variable: ResponseContent (of type Dictionary).
After the Call action add Get item from Dictionary action to get the Max ID.
Add Set Workflow Variable action to get the Min ID.
Add Loop Shape (Loop with Condition) to get all the duplicate titles and integrate them to a string.
Create item in Lookup2.
The final Stage should look like this:
Start the workflow automatically when an item is created.
Add item to Lookup3, then workflow will be started automatically and create item to lookup2.
See the below in workflow History List:
References
SharePoint Designer 2013 - Extracting values from a multi-value enabled lookup column into a dictionary as separate items:
http://social.technet.microsoft.com/Forums/en-US/97d34468-1b53-4741-88b0-958472f8ca9a/sharepoint-designer-2013-extracting-values-from-a-multivalue-enabled-lookup-column-into-a
Workflow actions quick reference (SharePoint 2013 Workflow platform):
http://msdn.microsoft.com/en-us/library/jj164026.aspx
Understanding Dictionary actions in SharePoint Designer 2013:
http://msdn.microsoft.com/en-us/library/office/jj554504.aspx
Working with Web Services in SharePoint 2013 Workflows using SharePoint Designer 2013:
http://msdn.microsoft.com/en-us/library/office/dn567558.aspx
Calling the SharePoint 2013 Rest API from a SharePoint Designer Workflow:
http://sergeluca.wordpress.com/2013/04/09/calling-the-sharepoint-2013-rest-api-from-a-sharepoint-designer-workflow/

GREAT info, but it may be helpful to note that when replacing a portion of the variable "Countries" with a whitespace character, you may cause the workflow to fail in a few specific cases (certain lookup fields will not accept this and will automatically
cancel). I only found this out when recreating your workflow on a similar, but much more complex list set.
To resolve this issue, I used another utility action (Extract Substring from Index of List) to clear out the whitespace. I configured it as "Copy from
Variable: Countries, starting at
1 (Output to Variable: Countries), which takes care of this issue in those few cases.
Otherwise, WOW! AWESOME JOB! Thanks! :)

How can I join 3 tables while extracting data from SAP R/3?

I have 3 tables with the following columns
Emp table (emp)
emp_id
emp_name
emp_add
Dept table (dept)
dept_id
dept_name
dept_loc
Location table (loc)
loc_id
loc_name
Now. If I want to select data from loc_id = 10 and emp_id between 2000 and 3000
How to join these three tables while extracting data from R/3
join condition
loc.loc_id = dept.loc_id
and dept.dept_id = emp.dept_id
and loc.loc_id =10
and emp.emp_id between 2000 and 3000.
Could any one let me know the procedure to extract this data into BW system.

Hi,
shouldn't your join condition be:
loc.loc_id = dept.DEPT_LOC
and dept.dept_id = ??
If you can join the three tables then create a generic datasource (RSO) based on a view (create your view with your join in SE11).
Enable the loc_id and the emp_id as selectable in the datasource so you can then select the values from a BW IPack.
hope this helps...
Olivier.

Extracting data from Z-table from SAP R/3 to BW

Hi all
I want to extract data from a Z-table from SAP R/3 system to Bw system. Currently I am on BW 3.5. Since it is a Z table I dont have a standard extractor for it & I dont knw how to create it. Can anyone provide me with the step-by-step documentation of how to extract data from a non standard SAP table????

Hi
You need to create Generic Datasource on the Z-Table you want to get data from
Go to RSO2 transaction to create generic datasource .
You need to give technical name of datasource under datasource type you want and click on create. Then you can give descrption and Application component under which u want see the datasource,
enter the z table name under view/ table and save.
here you can click on check boxes to make fields hidden or selection fields.
Regards
Ravi
Edited by: Ravi Naalla on Aug 25, 2009 8:24 AM

Extract thumbnails from PE7 Organiser

Similar Messages

Maybe you are looking for