Extracted Data size in sender system

Hi,
How to we know the size of the extracted data is sender system before loading data into the receiver system? Which phase in TDMS tree would provide us details?
Thanks.

Hi,
In order to get an approximate data transfer volume,
First you will have to enable Size Prediction in activity "De- / Activate Size Prediction for Receiver System" in System Analysis Phase.
Then, post running of the optional activity "Fill header tables (Collective Exec.) (Optional)", we have an activity "Display Data Transfer Volume (Optional)" which would show the approximate data that would be transferred to your target system
But note that this would mean extra runtime since the optional Fill Header Activity too would need to be executed.
Regards,
Suman

Similar Messages

Error while extracting data from a remote system

Hi,
I am facing problem while extracting data from a remote system. The connection is alright I can extract the table required from the remote system,but when I deploy it I get this error
ORA-04052: error occurred when looking up remote object [email protected]@ORACLE_UBN_15_LOCATION1
ORA-00604: error occurred at recursive SQL level 1
ORA-28000: the account is locked
ORA-02063: preceding line from UBNDW@ORACLE_UBN_15_LOCATION1
here Scott.demo1 is the table and UBNDW is the sid of the remote system and ORACLE_UBN_15_LOCATION1 is the location. Please help me out with this
Thanks

Hi,
IDOC's need to be processed manually either in OLTp or in BW depending on the failure. Error msg in monitor status will take u to either BW or OLTP whernever there is a prob. Process IDOC's , this will start the left over packets and will finish the load.
we hav to check IDOC in WE05(t-code) and know the status these are WE51,WE52,WE53 AND GOTO WE19 there we hav to execute the exist Idoc will succesfully loaded Idoc
Goto St22 see the short dump error msg..
post if there any inf..
Thanks,
Shreya

Looking for SAP solution to extract data from the production system

Hello,
we are looking for the SAP standard tool to extract data from the production system and copy it to the development system. It should be as functional as some kind of partial client copy. The data, which we need to replicate is master and transactional data from FI, CO, AA MM and nice to have FS-RI modules. There is a product offered by the IntelliCorp called "Data Management" but we would like to know if SAP offers its own product.
Kind regards,
Krzysztof Murkowski

Hi,
SAP offers a solution called 'Test Data migration Server' or TDMS.
You can access the master guide from the below link:
https://service.sap.com/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700006332942006E
Cheers !!
Satya.
PS: Pls reward points if the answer was helpful...Thx.

How to extract data from a remote system

Hi,
I want to extract data from another system and map it with a target table in my local machine. what is the procedure to do that?
I tried to create another module specifying location of that remote system I could extract the table but when I am mapping with the target table I am getting this error
ORA-04052: error occurred when looking up remote object [email protected]@ORACLE_LOCATION_UBN_15
ORA-00604: error occurred at recursive SQL level 1
ORA-01017: invalid username/password; logon denied
ORA-02063: preceding line from UBNDW@ORACLE_LOCATION_UBN_15
here ORACLE_LOCATION_UBN_15 is the location and UBNDW is the SID for that system
SCOTT is the username I have provided while creating the module
Please help me out with this..
Thanks

Hi Roberto,
thank you for the fast answer. I have read this before but i don't understand the needed steps on the Oracle-System.
Hope anyone can help me...
Thanks
Muammer
Message was edited by:
Muammer Kizilaslan

Extract data from Retai & AFS system

Hi , Guys,
If there are SAP Retail & AFS system with different master data and transactional data , how can I extract master data and transactional data from these two system into SAP BW?
For example , if i want to extract the stock management data , how do I create the two Souce system in BW, both as SAP souce system or not?
Thanks !

Hi Yong,
1. Should I create both systems as SAP source system or not?
Yes, both should be created as SAP source systems.
2. If I want to extract the master data of 0MATERIAL , should I do the extraction job from the two source system with "0LOGSYS" ?
You have to understand the business process of how material master data flows across these two systems with the help of the functional team.
In our scenario, we have not used '0LOGSYS', because the same material code coming from both the systems were one and the same.
3. If I want to extract the transactional data of stock movement data from both systems, which infocube in BI content can I use?
I suggest you implement standard business content ( 0IC_C03, I guess ) and utilize that for one source system ( Say AFS). Copy this cube into Z cube called ZIC_C03 and connect the retail data sources to this cube. If you want to combine stock reporting from both the systems, you can create a multiprovider on top of this.
Thanks,
Krishnan

Extracting data to an external system

Hi,
We need to extract data from an R/3 system into a BW system and the same data (and more) should also be uploaded into a customer application (based on Oracle).
I wonder what's the best in order to load data into this external system:
1. Read data from the R/3 system, using RFCs (calling the function modules of the corresponding datasources, don't know if this is possible)
2. Use the open hub service functionality, in order to read the data from the BW system.
Any comments or suggestions would be appreciated.
Thank you,
Ana

Hi Ana,
Could you elaborate more on what kind of data you are willing to pull from R/3 using which method. first check wheter you can use standard extractor to pull the data into BW. Check what is the method you are going to follow in order to pull data , Delta or Full update (If just one time). If standard extractor are present try to use that than Generic method.
Infospoke supports distribution of data to Flatfile and Database and check if you need to do any transformation when you extract the data from BW to external Database.
Experts feel free to comment if my understanding is not correct.
hope it helps.
Thanks.

0CRM_SALES_ACT_1 takes a long time to extract data from CRM5.0 system

Hi Team,
We are having CRM 5.0 and BW 701.
We are extracting data from CRM to BW using extractor 0CRM_SALES_ACT_1 in CRM. But it is taking long time.
Please suggest what can we do to improve the performance.

Hi,
its depend on the data volume its take a time along with CRM server.
during your load time if crm server was busy then it may delay your load.
Need to trigger your load where less burden on servers(CRM/BW).
While triggering before please check available application servers to process your request at SM50.
if this full load and have huge data then please split your loads with selections and load them into bw.
you can increase processing records count and info pack wait time at info pack level.
go to info pack--> menu scheduler--> wait time and datas setting for data transfer.
during your load time ask basis team to keep on eye at T code - SM58(CRM).
Thanks

Pulling/Extracting Data from Multiple SAP Systems - Scripting, ABAP?

Hello All,
I am working as an analyst for a large company that has multiple SAP installations across the world. What I am trying to do is create some global reporting metrics based on data from all of those systems on an ad-hoc basis without having the other units send the data to a central repository. I can receive access to all of the systems but I am unsure how to pull the data. The access to one of the systems I have currently does not allow the use of ABAP or RFC but does allow scripting. If I have a good business case I could ask for ABAP access and RFC as well.
I have researched and read through many posts and articles within the forums but I am yet to find a solution. I have experience in VB, VBA, and MS Access.
Can anyone suggest any ways to move forward?
Thanks!

According to my understanding, you may use vba in your excel or a just vb by programming against rfcsdk(librfc32.dll) or the newly nwrfcsdk, or use jco or nco..., but all these method are based on rfc function call.
You may write a simple abap side data extraction agent, just a function select some table with the data you interest, and then call this function from outside regularly, then you may save the returned table to a csv then bcp to sqlserver(c + batch), or just write to excel sheets(vba).
The simple table read function you may check RFC_READ_TABLE, but it has some limits and are not released. The more functional agent is also can be found from other vendors, eg ms sqlserver2005 kit`s sap adapter...
I do not have idoc or services experience, maybe in that senerio you will find a easier solution.Good luck, you may reach me at <b><REMOVED BY MODERATOR></b>
Message was edited by:
Alvaro Tejada Galindo

Extracting data from R/3 System table

Hi,
Currently, I am reading table data using RFC_READ_TABLE function module. but I want to achieve same thing using the Open hub services. There is so much of information about infoSpoke/open hub etc. But couldn't understand how to specify the target table and the query parameters etc. It would be of great help if somebody can point me to the correct document which describes all the steps.
Thanks,
Kranthi

Hi,
[check this out|http://help.sap.com/saphelp_nw04/helpdata/en/ce/c2463c6796e61ce10000000a114084/frameset.htm].
Siggi

SAP ECC 6.0 - Using BAPIs for C# to extract data out

I have had a client recommend a strategy of extracting data usin C# (Visual Studio 2005) to extract data from SAP ECC using BAPIs.
We do have an existing methodology in place using flat files to extract data to non SAP systems
We have purchase XI which we intend to implement next year.
I basically wanted to keep things tidy and continue with the flat file interface strategy just to keep things simple going forward to XI.
THen there is also the security piece, the developer has had to slowly build a profile / roles that alows him to come in thru visual studio to access these BAPIs
I am looking for anyone who has had experience with this and what your experiences are. As well, what are the SAP best practicies concerning this strategy
Thank YOU ALL who will reply

I think that SAP's strategy toward exposing BAPI is leaning toward leveraging their AS-JAVA stack. With the AS-JAVA Enterprise Services and standard delivered web content, SAP is already exposing many existing BAPI/Business Functionality outside of the ABAP world. However, that's not saying that traditional flat files have no place in the future. Matter of fact, I don't see flat/delimited files going away any time soon.
It all really comes down to what you are doing, you may even end up with a landscape that's a mix of files/RFCs. Here inhouse, we leverage file based transfers for large data sets such as SAP BI OHS extracts, and daily R/3 FI extracts. Why file? because it's simple, easy to control, and you can see the data being transferred. A file can be "hold in my hands" if you will, at best there's just a few characters in-flight.
As for RFCs, any type of RFCs in fact (Anything from sap .net connector to AS-JAVA ESOA Based ES), are basically designed for transactional data. Here, you are looking at things that are high in transactional count but small in individual size. Your client's call using C#, it all really depends on how you are doing it. MOST IMPORTANTLY: Make sure you are using a proven, standarized, and SAP supported way, PERIOD. NEVER EVER go into production with a "hack".
For the high-transactional-count-small-individual transactions, we leverage BizTalk Server (BTS) here. I'll be frank, we are not using BTS because we wrote it. We are using BTS because it just works better for us, in our environment. BTS now support SAP 2.0 connector (registered program ID) and SAP 3.0 (WCF based, direct SAP RFC call, supported by Microsoft AND SAP). We are leveraging these adapters and BTS (as distribution and transformation) in our environment more and more.
So, long story short: Determine the transaction type, multiple solutions is ok, make sure the solution is supported!

Problem with extract data from R/3 to BW

I want extract data from R/3 system.the problem is when I run the infopackage,I can see the status is yellow In the Monitor and the data can't extract to BW.but in the source system,the job of extracting data has been finished.
(use the Tcode: WE02)the Outbound IDocs and Inbound IDocs are OK，but in the BW system ,I canu2019t see the Inbound IDocs.
In the source system use Tcode: SM50,I can see the process SAPLQOWK is running for a long time and run out system memory.
use Tcode : SM58, I execute LUW, the data can transfer to BW system,but the report SAPLQOWK is not stop.
it would be stopped by canceling the process manually in operating system or it run out time.
why can't i extract data from R/3 system successfully ?
why the process SAPLQOWK can't finish?
how can i do?

Hi,
I hope the note 527481 would help you to sort out this problem.
Regards,
Anil Kumar Sharma .P

SAP (ECC) extractor to transfer data into Non SAP System

Hi Experts,
Scenario : We had a requirement to decommission the existing SAP BW system and merge it into Non SAP BI system (say MSBI).
Existing BW system getting data from standard extractor and populating till cubes.
Now If this SAP BW system will be decommissioned and all the data needs to be moved to new Non SAP System BI.
What will be the approached for this smooth transfer.
Will SAP (ECC) std extractor will be used to move the data into non SAP BI system ? How ?
Any documentation and experience will be helpful.
Thank-You.
Regards,
VB

Hi VB,
First you need to identify that your MSBI system support BCI(business content integration) method. For example Informatica support BCI and provide RFC plugins to integrate with SAP. If your MSBI support BCI method then you can use standard dataextractors to extract data in new BI system. You will also need to plan the reporting model and how the extracted data will be feeded in your BI datamodel/reporting side. You may use some transformation reference from your existing SAP BI system.
Thanks
Amit

Extract data from AMPLA to SAP BW

Hi All,
My requirement is to extract data from a Non SAP system called AMPLA (SQL Server 2012) to SAP BI system (7.0). I need to consider possible ways for SAP BI to extract data from Non SAP Systems like DB Connect, UD Connect, Web services etc. Does anyone have experience extracting AMPLA data to SAP BI system successfully and what method is ideal to be used? Also in what form is data usually available in AMPLA source system(tables/views etc)?

Hi Udit
Before that could you refer this SAP Notes for database connection
128126: Database Connect for external tools
1601608: How to access an external SQL Server database
Regards
Sriram

Error when extracting data from ETL - Missing messages and missing InfoIdoc

Hi All,
We are using BW 3.0 and extracting data from other source systems through Informatica Powercenter (ETL). The system is working fine but when we try to extract data on 31st Dec , we get the following error. Only this load gives the error and all the other load to other data targets are going fine. All the data are one-to-one mapped from ETL to BW.
Error messages from Monitor -Status tab:-
   "InfoIdocs missing; external system
   Diagnosis :- InfoIDocs are missing. The IDocs are created in BW with non-SAP systems as source
   systems that transfer the data and metadata to BW using BAPIs. Since the IDocs are missing, a
   short dump in BW probably occurred.
   System response: No selection information arrived from the source system"
Error messages from Monitor -Details tab:-
    Missing message: Number of sent records,   Missing message: Selection completed
Highly appretiate your suggestions.
Vinod.CH

Hi Rathy Moorthy,
Thank you very much for your reply. The source system connections are OK and we are able to load data to other Data targets from ETL, we have issue only with this this particular load. The load extracts data and I have loaded the data from ETL to PSA and have checked the data content and it is correct. But when I update the same data to the target I get this error. I have also tried to update from PSA to target and also directly from ETL to target.
Appretiate your suggestions.

Error when extracting data in rsa3

Hi,
we are using BI7.0. While when i am extracting data to PSA i am getting an error that error in source system. when i am extracting data in RSA3 source system side there also it was showing the same error. Data souce is active.
So please let me know if it as anything to do.
regards,
mahesh.

Hi,
Which datasource are you using to extract data ? Go rsa5 and try to activate it then retry.
Regards,
®

Extracted Data size in sender system

Similar Messages

Maybe you are looking for