Extracter/datasource that used last time to load the data

All,
Can some one help me to find out a table where it stores log/detail of a datasource or extract structure (in BW) when was the last time it was used to load the data ? Help would be highly appreciated.
Thanks,
Hari

Hi Hari, Welcome to SDN.
In bw side select datasource and monitor. Increase monitor selection to get the details.
Hope it Helps
Srini
[Dont forget to close the call by assigning poings.... - Food for Points: Make a Difference through Community Contribution!|https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/007928c5-c4ef-2a10-d9a3-8109ae621a82]

Similar Messages

SSRS report taking time to load the data

Hello Everyone,
I have create SSRS report get data using web service. When i run the web service methods its gives me result instantly, But when i run the report it takes lot time to load data in SSRS report. some times in SharePoint page it shows time out error.
Could you please tell me why SSRS report lots of time to load data.
Thank You.

Have a look at ExecutionLog tables in report server database to get an idea of which step is taking more time.
http://blogs.msdn.com/b/crm/archive/2008/11/19/auditing-report-execution-using-the-reportserver-database.aspx
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Taking long time to load the data

Hi All,
When my BI colleague is trying to load data from a source system, it is taking too long.
And the corresponding job BI_BOOK* is taking around 90000 seconds already.
Can anyone suggest how to tackle this problem?
Thanks so much in advance.
Best Regards, Pradeep

Hi
If your Flat File Source System Takes, time there is no other go than Make the Request Red and Delete the same.Repeat the Upload.
Make sure that your Flat file is closed while upload,
If Infopackage loads data from a flat file on your workstation, then you cannot execute the Infopackage in a Process Chain you need to put your flat file on the Application Server(AL11) and change your Infopackage to load from there instead of the workstation
The file should be closed while scheduling
The file path mentioned in the external data tabpage of the infopackage should be correct
Records in the file should be in uppercase you can use lowercase for a particular characteristic.provided the lowercase checkbox in the general tabpage of the maintenance screen of the infoobject is checked.
Calendar day should be of the format yyyymmdd in the file
Hope ithelps
Edited by: Aduri on Jan 30, 2009 11:19 AM

Why are the options for "When Firefox starts" NOT clickable in Firefox 5? I want to choose "Windows and tabs that where opened last time you accessed the net" but Firefox won't let me.

In the previous version of Firefox one could choose to save tabs so that when Firefox opened, all the tabs from the previous sessions appeared. This was done in Settings > Options > General > Startup. In the menu for the "When Firefox Starts" one had the option for "Windows and tabs that where opened last time you accessed the net." in Firefox 5.0, this menu is gray and not clickable. Help, please?

''Why are the options for "When Firefox starts" NOT clickable in Firefox 5?"
Possibly you are not saving your "browsing history" which is what the session history is tied into.
'''Not saving History''' -- check your settings for '''Tools > options > Privacy'''', make sure you are not clearing more than just cache in "Settings for Clearing History"
* http://img232.imageshack.us/img232/4928/clearcachew.png
* clearing your history at end of session, cache is the only one you would want to clear at end of session, if you don't want to lose things
There are several things that are related to private browsing and not saving History
* Private Browsing Ctrl+Shift+P
* You selected "Never remember history" in first drop-down of Tools > Options Privacy and all of the check marks disappear (See picture above)
* "Permanent private browsing mode" was check-marked under "Use custom settings for history" in the first drop-down of Tools > options > Privacy (see picture above)

I see there is another ios update. I have an iPhone 4S. The last time I updated the ios I lost all my contacts, as I had not been using the iCloud as a backup. I am now apprehensive about the latest update. How can I determine if contacts are backed up?

I see there is another ios update. I have an iPhone 4S. The last time I updated the ios I lost all my contacts, as I had not been using the iCloud as a backup. I am now apprehensive about the latest update. How can I determine if contacts are backed up?

You should never lose contacts under any circumstances.
Although contacts are included with the iPhone's backup, contacts are designed to be synced with a supported address book app on your computer where such important data should be available with or without an iPhone or any cell phone. Not a good idea to depend on a cell phone for such important data which can be lost or stolen or damaged beyond repair.
In addition, there are a number of free email accounts that support syncing contacts over the air including an iCloud account, Gmail, Yahoo, and Hotmail.
If you are not syncing contacts over the air with an iCloud account and not backing up your iPhone wirelessly with your iCloud account, your iPhone's backup is being updated by iTunes on your computer which is updated as the first step during the iTunes sync process.
With Windoze, contacts can be synced with Outlook 2003, 2007, or 2010 along with syncing calendar events, notes, and reminders, or with the address book app used by Outlook Express and by Windows Mail called Windows Contacts for syncing contacts only. With a Mac, contacts can be synced with the Address Book app. This is selected under the Info tab for your iPhone sync preferences with iTunes.
If the supported address book app on your computer is not used and has no contacts available, before the first sync for this data enter one contact in the supported address book app on your computer. This will provide a merge prompt with the first sync for this data, which you want to select.

Hi, how to load mac without running windows (bootcamp)? The problem is this: the last time i ran the windows, but he hangs and died (can not run further the logo). now i can not load not windows, not maс! how to be, what to do???

The problem is this: the last time i ran the windows, but he hangs and died (can not run further the logo). now i can not load not windows, not maс! how to be, what to do???

can any body help me, plz!!

Can I use 2 Time Capsules on the same network

Can I use 2 Time Capsules on the same network
Posted: Jul 23, 2009 1:49 PM Reply Email
Here is what I want to do. I currently have a time capsule used for one end of the house. Currently my 2 kids rooms are in an addition that I have run a cable from the time capsule to each of their rooms. If I want to give them wireless for that part of the house could I add another TC, for wireless and they can both backup their macbooks to that time capsule.
So Can I add a 2nd time capsule to extend by "N" network, or should I just go with an AP express or extreme and let them each have their own HD backup for each macbook?
Brett

Have bought many reconditioned (Refurb) product from Apple site and have always been happy with them. To date none have failed me and we have been Apple customers since 2006. With that said when you buy Refurbs make sure you know what model you are getting. The current TCs on the Apple site are last generation. The way to tell is to check the model number against the current one. Easy way to do this is to put both in the shopping cart and compare the model numbers. The Refurb model number is FB277LL/A and the new TC model is MB765LL/A. The first digits identify whether a Refurb or new, the rest should be the same if they are the same model number.
Before you buy, now which model number you want and then check other sites to compare prices. I recently purchased a new TC on Amazon for a better price then the Apple Store Site. For larger Refurb purchases like MBPs, we choose to buy directly from Apple; but for peripherals we often buy from OWC, Amazon, and other sites. Hope this helps.

How do I "save tabs and quit" in this new version of Firefox, as I did in the older version? I want to be able to see the same websites open from the last time I closed the computer.

In an earlier version of Firefox, when I went to close it, I would get a prompt "save tabs and quit?" that allowed me to see the same websites open from the last time I closed the computer. Where is that feature on the new version of Firefox?

Firefox 4 and later versions save the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session. 
Use "File > Exit" or "Firefox > Exit" (Mac: "Firefox > Quit Firefox") if you want to restore multiple windows or otherwise have problems with restoring tabs. 
You can use "History > Restore Previous Session" to get the previous session at any time. 
You may need to click the orange/gray Firefox button to see History. 
There is also a "Restore Previous Session" button on the default about:home Home page. 
Using the "Show my windows and tabs from last time" setting is a more reliable way to restore session data.
* [http://kb.mozillazine.org/Menu_differences Firefox/Tools > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

Extraction time while updating the data from update rule

Hello Friends,
Can you please tell me that why it is taking more time while updating the data from update rule to data target.
I believe that it is taking 40% of total extraction time.
Is there any specific reason for it?
Prompt reply will be appreciated.
Regards,

hi,
check if you have complex transformation in that update rules, like calculation, read from other tables, etc.
take a look 'bw loading performance and analysis' doc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
and bi performance tuning knowledge center
Business Intelligence Performance Tuning [original link is broken]
there e-learning for bw performance
hope this helps.

How can I make GRID view the default view? The icons for view that used to be located in the upper right top of the page near the 'search library' are gone.

How can I make GRID view the default view? The icons for view that used to be located in the upper right top of the page near the 'search library' are gone.

99jon wrote:
Perhaps it’s a design feature to speed up the Organizer launch.
I am sure it is.
- The normal use of the Organizer is not the folder view, it's the thumbnail view with an organization based on categories and folder. That way you should forget completely where your pictures are stored. Anyway, the folder view in the Explorer is not a map of the location of the different bits of your file, it's only a logical representation. That's easy to see when you are doing a defragmentation.
- The folder view is useful even for those using normally the thumbnail view, but that is only for rare cases when you must change the folder organization, for instance moving files to another drive. The folder view is here to prevent you from changing things from the explorer and outside of the Organizer.
- The new folder list view, which you find 'funny' is there to help better organizing using tags. Its huge advantage is that such a view is created extremely quickly by extracting the last subfolder in the media table : it's the way the database sees the folders, based on its own content, totally ignoring the complex folder organization of your disk with media files or any unrelated other kind of data. You should use it in many cases, the main purpose being assigning tags when you have assigned descriptive folder names. I had suggested such a solution to prevent the long standing bugs in the folder view of previous versions.
So yes, the purpose is:
- to speed up switching modes
- to help folder organization fans to migrate to tags organization
- to hopefully get rid of the old folder organization bugs

Large Schema file registered and using folders to load the data (WebDAV)

I have a very large schema file that I have registered using binary (Schema file > 30000 lines).
My data has been in MarkLogic and it is organized in a folder structure providing reuse of pieces of the xml.
It seemed the most logical way to load the data was to create the folder structure in XDB and move the files via WebDAV. We also have extensive XQueries written.
My question is how do I query the data back our when it is loaded this way. I have read and experimented with resource_view but that is not going to get me what I need. I would like to make use of my xqueries that I have.
Can i do this, and if so, HOW??

Sure. Let me lay out a with some more specific information.
My schema has an overall root level of "Machine Makeup".
All of these items are defined under it with a lot of element reuse and tons of attribute groups that are used throughout the xml schema. I can do a lot of things but what I cannot do is change the structure of the schema.
The data is currently in a "folder structure" that more closely resembles the following. I have tried to annotate number of files and keep in mind all of these are working documents and additional "record" (xml files) can be added.
Composite - contains 12 folders and each of these folders contain xml documents
compfolder 1
- compfolder 12
Most of these folders contain < 200 .xml files (each with id.xml) as the name of the file however one of these directories currently contains 1546 files. They all belong... no real way to split them up further.
At the same level as composite
About half of these folders at this level contain > 1000 but less than 3000.
Like
PartsUse > 1000 but less than 3000
transfer of parts 8000 and can continue to grow
people > 3000 and these would be used in the transfer of parts like "who sold it" Everytime someone new a new one is added etc.
There are about 12 folders at this level.
Now, the way the system works is a new person that is not in our list is involved the users get a "new" empty xml document to fill in and we assign it an id and place it in the folder.
So it would something like this
Composite
folder1 - 1000 xml file
folder 2 - 200 xml files
folder 12 - < 2000
Locations
contains < 2000 xml files
Activities < 3000 xml files
PartsTransfer 8000 xml files and growing
materials < 1000 xml files
setup < 1000 xml files
people 3000 xml files and growing
groupUse < 1000
and so forth.
All of the folders contain the links I had previously layed out
So Activities would have materialLink id = "333" peopleLink ="666"
And so of and so forth.
So because my file numbers are > than the optimum about half the time, how would I have 3 separate xmltype tables (I understand mine would be more than 3...)the one schema file that is intertwined with others. Can you show me an example. Would I annotate it in the schema at just those levels. This schema file is so huge I would not want to have to annotate all elements with a table. Can I pick and choose to mimic the folder structure?
THANKS SO MUCH for your help. I really want to show that Oracle is the way. I can implement it with a simpler structure but not the size of complexity that I need. I haven't been able to find a lot of examples with the new binary registration.
Edited by: ferrarapayne on Nov 16, 2011 1:00 PM

Unable to load the data into Cube Using DTP in the quality system

Hi,
I am unable to load the data from PSA to Cube using DTP in the quality system for the first time
I am getting the error like" Data package processing terminated" and "Source TRCS 2LIS_17_NOTIF is not allowed".
Please suggest .
Thanks,
Satyaprasad

Hi,
Some Infoobjects are missing while collecting the transport.
I collected those objects and transported ,now its working fine.
Many Thanks to all
Regards,
Satyaprasad

Loading the data from a text file to a table using pl/sql

Hi Experts,
I want to load the data from a text (sample1.txt) file to a table using pl/sql
I have used the below pl/sql code
declare
f utl_file.file_type;
s varchar2(200);
c number := 0;
begin
f := utl_file.fopen('TRY','sample1.txt','R');
loop
utl_file.get_line(f,s);
insert into sampletable (a,b,c) values (s,s,s);
c := c + 1;
end loop;
exception
when NO_DATA_FOUND then
utl_file.fclose(f);
dbms_output.put_line('No. of rows inserted : ' || c);
end;
and my sample1.txt file looks like
1
2
3
The data is getting inserted, with below manner
select * from sampletable;
A     B     C
1     1     1
2     2     2
3     3     3
I want the data to get inserted as
A     B     C
1     2     3
The text file that I have is having three lines, and each line's first value should go to each column
Please help...
Thanks

declare
f utl_file.file_type;
s1 varchar2(200);
s2 varchar2(200);
s3 varchar2(200);
c number := 0;
begin
f := utl_file.fopen('TRY','sample1.txt','R');
utl_file.get_line(f,s1);
utl_file.get_line(f,s2);
utl_file.get_line(f,s3);
insert into sampletable (a,b,c) values (s1,s2,s3);
c := c + 1;
utl_file.fclose(f);
exception
when NO_DATA_FOUND then
if utl_file.is_open(f) then utl_file.fclose(f); ens if;
dbms_output.put_line('No. of rows inserted : ' || c);
end;SY.

How to load the data using a plsql table in ODI.

Hi All ,
Can anyone help me on this ?
We have a PLSQL procedure which returns a plsql table as out parameter.
We are supposed to load the data in to a file using this plsql table (Table type) in ODI.
Can this be done using ODI?
Regards,
Karthik+

Hi,
We have one process with a ref cursor (Oracle) as a source and remote Oracle DB as a target. I ended up writing my own KM that populates a global temporary table from the cursor first and then transfers the data to target. If temporary table is an option for you, the rest is pretty easy.
Regards.

In one website, it takes to much time to load the page, in other site its not taking time, so do i need to enable or change any settings

in one website, its taking time to load the page, on other PC its not taking any time( with internet explorer) in my PC other websites are opening quickly but this website takes too much time with firefox

Zepo wrote:
My iMac has been overwhelmed almost since I bought it new. After some digging the guiness bar suggested its my Aperture library being on the same
internal Tera byte drive as my operating system.
Having a single internal hard drive overfilled (drives slow as they fill) is very likely contributing to your problems, but IMO "my Aperture library being on the same internal Tera byte drive as my operating system" is very unlikely to be contributing to your problems. In fact the Library should stay on an underfilled (roughly, for speed, I would call ~half full "underfilled") internal drive, not on the Drobo.
Instead build a Referenced-Masters workflow with the Library and OS on an internal drive, Masters on the Drobo, OS 10.6.8 (there have been issues reported with OS 10.7 Lion). Keep Vault backup of the Library on the Drobo, and of course back up all Drobo data off site.
No matter what you do with i/o your C2D Mac is not a strong box for Aperture performance. If you want to really rock Aperture move to one of the better 2011 Sandy Bridge Macs, install 8 GB or more of RAM and build a Referenced-Masters workflow with the Library and OS on an internal solid state drive (SSD).
Personally I would prefer investing in a Thunderbolt RAID rather than in a Drobo but each individual makes his/her own network speed/cost decisions. The Drobo should work OK for referenced Masters even though i/o is limited by the Firewire connection.
Do not forget the need for off site backup. And I suggest that in the process of moving to your new setup it is most important to get the data safely and redundantly copied and generally best to disregard how long it may take.
HTH
-Allen Wicks

Extracter/datasource that used last time to load the data

Similar Messages

Maybe you are looking for