Extracting archives makes system unusable

Hi.
When I want to extract an archive (even small), the system becomes unusable. CPU goes up to 100%, Sound interrupts, everything lacks.
Well, I don't know where to start. Its an Acer Extensa 5220 with C2D T7100 as replacement CPU. I don't know, if this problem occured with the original CPU also, but I think i doesn't matter, because the new one is much more powerful.
Maybe its a speedstepping problem? During extraction it stucks at 800Mhz and doesn't step up to 1.8Ghz. Speedstep is set to "ondemand".
Some hints? Can provide more infos if needed.
Greetings

Thanks. I've checked DMA for some time, it was enabled. This was the first thing, I've looked for
edit: speedsteps works normal at programm-startups like OO
Last edited by moqwai (2008-04-28 21:49:51)

Similar Messages

Eratic mouse behaviour makes system unusable

After updating to Lion 10.7.4 my system is now unusable. If my 27inch Cinema Display is connected then the mouse pointer jumps off in different directions to the edges of the screen. Move it very slowly (no more than 1 inch per second) and it just about stays stable. Random shooting off to the screen edge even when not touching the mouse.
Unplug the Cinema Display and the random moves stop, but...
Drag and drop works only occasionally
Single clicking randomly gives double clicking results.
All this has only ahppened since the 10.7.4 update. No additional software was installed at that time or since. Tried various wireless and usb mice from Apple, Logitech and a local manufacturer all with no effect. Faults are all able to be replicated instantly.
I now have a system which is unfit for the purpose for which is was sold due to the update.
Seen dozens of posts with the same problem and no action from Apple. Any help would be much appreciated.

Thanks for the reply.
Yes, it looks like something is acting a bit strangely.
All I want to do is to press and hold the mouse button on the title bar to drag the window, just as I would on any other OS.
I'm not looking to double-click (which OS X can be set to do minimize, but I've disabled), not a sticky click and release (like accessibility features might allow), not press a keyboard modifier key as well, and not to press, hold, and wait a while.
You're right that the next logical step is to connect a mouse directly, and that's what I'll do.
I'm going to try connecting the mouse directly, but that really goes against the KVM concept of using a single keyboard/monitor/mouse to control multiple computers. My KVM sends as a USB 1.1 standard mouse, down the same cable as the keyboard, and it works fine with other systems. (I've even got a magic mouse, but that's no good, as it hasn't got a middle button, which I need for my UNIX & Linux VMs.)

How to make JOB CONTROL setting for delta extraction in Production system .

Hello All,
We are in the process to transport our development to PD server in BI . We have transported the data sources to ECC production and now we are filling the setup table for " SD BILLING BW " . After filling Setup table data in full mode through infoPackage we have to load data in delta mode .
How we can set our Update mode(LBWE setting) in PD server ?
Is LBWE T.Code authorisation required in ECC PD server to make the setting of Update mode or We have to set all Job Control Paramater in Dev System at the time of transport the datasource request to ECC production . Is our time which is set in job control of ECC development will be reflected in ECC production ?
can any body tell me about how to make setting for delta extraction in Production system .
Thanks ...

Hi,
How do you load the data in the development system?
- you set up the update mode in the infopackage. There you must customize "Initialization"
- you have to filled the setup table in the production system without laoding the data in the BW? then this step was for nothing. Filling the setup table and do the INIT in the BW, this must be together - during no changing will be done in your R/3 SD.
Sven

Self Extracting Archives not working?

I downloaded a file that comes as a .sea (self extracting archive). Rumor has it I'm supposed to double click it to extract, but when I do, OS X asks me what program I want to use. The exact same file just opens on my friend's machine running Tiger, but not mine?
Questions:
1. Shouldn't it just open it? I thought that was the point... Anything I need to setup ot make it work?
2. In my efforts to solve it, I picked "Stuffit Expander" when it asked me what App to use to open the .sea. How can I un-register .sea with Stuffit so that, in case Tiget does decide to finally open the file, it isn't being sent to Stuffit?
Thanks

Very weird how they created that file.
When I double click on HPA3.sea, the OS asks what I want to open it with. Meaning that the file has no extension (visible or hidden) and no type/creator tags. So the OS has no idea what to do with it.
So I launched Stuffit Deluxe and chose it through the Open command. It then says, "The archive you are opening cannot be browsed. Would you like to expand it instead?". I choose yes, and it creates a file named "HPA3.1.sea", which still has no icon, but behaves like an application when I double click it. It then goes on to install some Photoshop actions.
So if you drop it on the Stuffit Expander, you should be getting another similarly named file. Either in the same location as the original, or in the folder where the Expander sits. If you're not getting it in either location, then try downloading the latest Expander from Allume's site. The Expander is free.

Can no longer make system image after Win 8.1 upgrade (error 0x80780119)

I've recently upgraded to 8.1 and am now trying to make system image.
Unfortunately, it's failing with error 80780119.
[Image of failed backup|http://www.sawyourad.com/toshiba/failed.png]
I've had this happen before on another computer system, and resizing the recovery partition seems to fix it, and is what's suggested on the web.
However, I can't seem to do that on this machine, diskmgmt.msc doesn't seem to show any disk space used, and worse, many of the partitions seem to be duplicated
[image of disk partitions|http://www.sawyourad.com/toshiba/diskmgmt.png]
You'll notice that none of the recovery partitions appear to have any space used.
I'm at a loss as to what to do next.
The 8.1 update has pretty much rendered my machine unsafe to use, as I can't back it up any more.
I hope I don't need to add Toshiba to my don't buy list.
Anthony Wieser
Wieser Software Ltd
+Message was edited: link has been removed - not allowed+

Hi
>I hope I don't need to add Toshiba to my don't buy list.
This is not a option buddy. Why? Because it seems that this is a common Windows issue as many people asked for a solution in the Microsoft forums and community.
[Backup fails Error code 0x81000019|http://social.technet.microsoft.com/Forums/windows/en-US/25deba76-464b-4a9d-9b32-a283bb6a88ce/windows-7-rc-backup-fails-errorcode-0x81000019?forum=w7itproperf]
Someone solved this by de-selecting the create driver image checkbox available when you choose the contents of the backup.
But it looks like his error come when hidden System Reserved partition created by Windows system does not have enough space to store a shadow copy.
Please check the freespace on this volume.
Follow the following steps:
1. Start -> Computer -> Right click -> Manage
2. Select Storage -> Disk management.
3. Verify that you have a System Reserved partition of around 100 MB size or more
4. If yes, right click on this volume and select Properties.
5. View used and free space.
Windows backup requires around 40 MB of free space on this partition to backup successfully.
So if the free space is less than 40 GB, backup does not get enough free space.
As a workaround try the following solution:
Since the default System reserved partition cannot be extended, creating a new system volume is the workaround. Here are the steps to move the system volume to any other volume:
1. Choose where you want to have your system volume.
Few things you need to keep in mind:
a. System volume can only be created on a primary partition of MBR disk.
b. If system volume & boot volume are together, then BitLocker feature cannot be used to encrypt volumes on your machine.
2. Suggest creating a new volume (say F:) on the same disk that contains the boot partition of size of about 490 MB (be careful to keep it less than 500 MB).
3. Assuming Windows is installed on C: on your machine. From an elevated command-prompt run: bcdboot.exe /s C:\Windows /s F:.
4. From elevated command-prompt run: DISKPART
5. From the disk part command-prompt:
DISKPART> select volume F
DISKPART> active
Now you can reboot your machine and F: will become the system volume.
You can undo this by repeating the same steps using the original system volume (you have to assign drive-letter to it) to revert to your previous configuration.

Extract Archival data and display in report

Hi All,
I prepared a report to display the details of GL accounts with vendor details.
i need to extract archived documents also and display in my report.
Kindly let me know how to extract the archived FI documents.
Regards,
Saravana

Hi..this is really habit of doing R and D.
Generally, we do archive the fi documents using the archiving object FI_DOCUMNT in the transaction SARE which archives all the tables related to FI application area.
Also, we do generally view the archived fi documents in the transaction SARE ..just you need to pass the object name as FI_DOCUMNT and the info structures if active.
We do also have the read program to extract the all the archive fi documents...please check this program: RFBELJ00
you can develop your own program as per the above standard one. But do you think, it is neccessary???
Please let me know if you need any inputs from me..!
Please rewards points if sounds helpful/useful.
Regards,
Shamim

Make System.in read input from a command prompt

How can i make System.in read input from a command prompt which is opened after program
is started. Please note that program starts without commad promt. Can u plz help?
sharmila

System.in DOES read from the command shell that you start the app in.
What you don't have is a prompt.
You should know about Java Almanac. There are code samples for simple things like I/O that everyone should know about. There's an example there to help you.
MOD

Eliminate entering password to make system changes

How can I eliminate entering a password when an app whats to make system changes - seems redundant since I am the administrator

I'm having a similar problem, since the 10.5.1 upgrade (I downloaded the 110MB version, as Apple readily admits that there are problems when using Software Update for upgrades).
I ran Disk Utility to repair permissions on my boot drive, and it prompted me for my administrator password (something that I've only had to do since the upgrade to 10.5). This time, the user name was blank (usually it fills in the user name with the account name I'm logged in under). I entered the information, and got the error. Double checked everything, and still no luck. After a third attempt, I was told I had to wait a while before trying again.
I'm hoping there's some simple fix or something I can easily to type in. I don't want to wait a few more weeks for Apple to release another patch, and I don't want to have to step back to an even more unstable version so I can use Disk Utility.
~Trilo~

I think in the iOS 7.1 it's will be very nice if you will make system in iPhone 5s that when you open the iPhone with your finger Siri will say welcome back [name you can choose] it's will be very nice.

I think in the iOS 7.1 it's will be very nice if you will make system in iPhone 5s that when you open the iPhone with your finger Siri will say welcome back [name you can choose] it's will be very nice.
In the options before you click on add finger you will be able to choose your name
And if you don't want it so you will click on i don't want it
and it won't say your name

We are all users here, just like you. Apple does not follow these discussions.
But you can tell Apple about your wishes here:
Apple - iPhone - Feedback

How do we do Archiving the system logs in SAP-BW

Hi All
How do we do Archiving the system logs in SAP-BW.
Can anyone will let me know reagrding this
If you have any docs also pls forward to my id [email protected]
Thanks & Regards
Balji

Balaji,
What is the landscape you have ?
Windows / Unix / Solaris etc ?
Also there are a lot of logs that are generated:
Archive log ,
System Log,
Transaction log etc...
The usual procedure is to copy them into another location and then delete the original file , the system will usually recreate the log and start logging new entries..
Arun
Hope it helps...

Created several DART extracts in Production System - OSS Notes

We have created several DART extracts in Production System and we are getting some error messages
Below Views are missing
view 0sap_BKPF is not existing
view 0sap_BSEG is not existing
view 0sap_BSET is not existing
view 0sap_Ekko is not existing
view 0sap_MKPF is not existing
view 0sap_MSEG is not existing
view 0sap_T003 is not exisiting
view 0sap_VBRK is not existing
Below Fields are missing
Field A001-A002AFABE is unknown in 2 below views
0sap_AMMST and 0sap_AMTRN
Edited by: TheGaurav on Jul 16, 2010 11:10 AM

Hi,
the note 611648 should help.
Br
Attila

Extraction from CRM system to BI 7.0

I want to extract BP relationships based on sales area.Kindly let me know if there are any standard datasources and what is the approach to extract from CRM system.

I believe DS for "CRM Business Partner: Partner Function Assignment (Sales Area-Dependent)" can help you:
0BPFUNCTION
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/f6/033a3b7fe88b57e10000000a11402f/content.htm

How to make system call to execute command line in JAVA?

Hi,
I am new in JAVA. How to make system call to execute the following command line in JAVA in LINUX environment.
rpm -qa jdkIn C programming, use as such:
system ("rpm -qa jdk");
How about JAVA?
Thanks.

Runtime.getRuntime().exec. But first read this:
http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html

How to take flash archive zoned system and how to deployee from jumpstart s

Hi All
How to take flash archive zoned system and that flash archive how to deployee from Jumpstart server
please help me in this,it is very urgent for me
Thanks
Murali

when you've created the flar image just setup the jumpstart server accordingly
1) create a profile for a flash installation
install_type flash_install
archive_location nfs js1:/data/server.flar
partitioning explicit
filesys c0t0d0s0 2000 /
filesys c0t0d0s3 6000 /usr
filesys c0t0d0s4 2000 /var
filesys c0t0d0s5 2000 /export/home
filesys c0t0d0s6 520000 /export/zones
2) create the jumpstart client just as you would normally
3) jumpstart the server
As far as i know this should work

Archive Information System (AS)

Hi All,
Can any body please explain me the concept (or purpose)of Archive information system or information structure. I want to know whether it will contain archived data or not.
Thanks in Advance!
Regards,
Kannan

Hello Kannan,
The archive information system is a tool used to access archived data. An archive infostructure is an "index" used to directly access the archive data files. They will contain a small subset of the archived data - the fields which have been configured to use as search criteria, plus the pointer to where the rest of the archived data resides.
Hope this helps.
Best Regards,
Karin Tillotson

Extracting archives makes system unusable

Similar Messages

Maybe you are looking for