Extracting delta's with ODP-data source 0MATERIAL_ATTR from SAP ECC

We are using ODP-replication to extract data from SAP ECC to a MS SQL-database by SAP BusinessObjects Data Services.
For extracting Material-data we use the standard data source 0MATERIAL_ATTR in SAP ECC.
This data source delivers a full load with all Materials in it.
In the properties of this data source (tab attributes) we saw that this data source is Delta_Extractor_Capable.
Therefore we set the extraction mode from 'Query' to CDC (= Change Data Capable) and did a new initial load to get all Materials again.
After changing a Material in ECC, we did a delta-load, but unfortunately we received ZERO records.
Is there anyone with experience on extracting delta's with data source 0MATERIAL_ATTR or another standard masterdata data source in ECC?
Thank you for your reaction in advance,
Best regards,
Jan-Hendrik

Hi,
You can check the delta records in RSA3 see teh article. in https://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
Checking the Data using Extractor Checker (RSA3) in ECC Delta Repeat Delta etc...
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/80f4c455-1dc2-2c10-f187-d264838f21b5&overridelayout=true
Data Flow from LBWQ/SMQ1 to RSA7 in ECC and Delta Extraction in BI
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/d-f/data%20flow%20from%20lbwq_smq1%20to%20rsa7%20in%20ecc%20and%20delta%20extraction%20in%20bi.pdf
Delete the Queue in LBWQ/RSA7 and then freshly load Init and Check the Delta.
Once you load the Init then if there are no new records then it won't get any data. so 0 records
Check in SM37 in ECC why the job is terminated. See in ST22 also.
Thanks
Reddy

Similar Messages

Block with query data source tipe: from clause query

I have a block that have this property.
But now I want to change data.
Do you know how to do it?

A from clause query does what is says: it can only query data. For DML operations use Table/Procedure.
hth,
J

ODP Data Source Delta issue 2lis_11_VAHDR 2lis_11_VAKON

Hi Expert,
I am pulling the data from SAP using ODP data sources. 2LIS_11_VAHDR 2LIS_11_VAITM 2LIS_11_VAKON.
For all the data sources I am doing the initloads. For 2LIS_11_VAITM data source after init load its enabling the delta.
For remaining data sources even if you try to pull the delta it's loading full load.
Steps I am following
LBWG do the deletion of setup tables.
OLI7BW fill the setup tables.
Run the data services job which pull the initial load. It loads all the data.
Change the ODP data source settings to Init load to No (Capture only delta)
In SMQ1 all the delta records will be captured
Run the Jobs which pull the delta records to ODQMON from there if you run Job in data services it has to pull the Delta records.
This is happening for 2LIS_11_VAITM but not for other data sources 2LIS_11_VAHDR and 2LIS_11_VAKON.
Event if you try to pull the delta records its loading all the records.
Can some one throw some light on this
Regards,
Murali.

In RSMO, go to the details tab and check in which stage the load has failed. If the issue is with extraction then go to Environment > Job Overview in the source system. Check if this job is complete.
I hope you must have cleared the Delta Queue, so now go and check if any entry is being displayed for 2lis_11_vahdr

Can generic function module extractions possible with CRM data sources.

Hi Friends,
can generic function module extractions possible with CRM data sources.
90% extractions are generic function module extractions.
How is it possible without BW adapters..
It's very urgent ...Please.
Thanks,
Basava Raju

Hi Madhu,
Just curious ... if you already have a generic FM extractor then just go into it and find out where it is reading the data from. If its reading data from the CRM system then thre is no need for any BW adapter ... just in case you need any ABAP help ... post here ... I may be of use to you.
Best regards,
Kazmi

11i EBS XML Publisher Report with Multiple Data Source

I need to create XML Publisher report in 11i EBS pulling data from another 10.7 EBS Instance as well as 11i EBS in single report.
I am not allowed to create extract or use db links.
My problem is how to create Data Source Connection using Java Concurrent Program.
The approach I am trying is
1. create Java concurrent program to establish connection to 10.7 instance.
2. Will write the SQL queries in Data Tempalete with 2 Data Source 1 for 11i EBS and 2 for 10.7 EBS
3. Template will show the data from both query in 1 report..
Is there any other way to proceed using datasource API...
thanks

option1:
The query should be same @ detail level, only the template has to be different for summary and details.
@runtime, user can choose to see the detail/summary
Disadvantage, if the data is huge,
advantage , only one report.
option2:
create two separate reports summary and details
and create diff data and diff layout and keep it as different report
Advantage, query will perform based on the user run report, summary/detail, so that you can write efficient query.
Dis advantage , two reports query/template to be maintained.

Delta Option for Generic Data Source

Hi ,
My requirement is Delta Option for Generic Data Source. This Data Source is getting Extracted from Function Module.
For this requirement I have followed below steps.
1) Added the Field (On which Delta gets enabled) to the extract structure by using Append Structure
2) Enabled Delta On this Filed.
3) If I try to save the Data Source, I have gone to a screen where I am able to see 4 coloumns
a) Selection
b) Hide Field
c) Inversion
d) Filed Only known in User Exit.
By default Hide Field and Filed Only known in User Exit check boxes have been checked.
Would you please tell what is the use of Filled Only known in User Exit check biox.
As My data source is getting the data buy using the Function Module, Shall I uncheck this Check Box.
Thanks and Regards,
K.Krishna Chaitanya.

Hi Krishna,
The "FIELD" should be checked if we write any enhancement in CMOD, so that system can identify that this particular field has enhancement written to it,
But even in real time systems i usually find that even though we check the "FIELD" or not , there is no effect .
So Checking "FIELD" or not will not impose any isses .
Regards,
Krishna

How to maitain Deltas for generic master data source

Hi Friends,
I created a view using MARA and MARC table. This view fields maitained by attributes of ZWMAT_PLT Characteristic.
Now i faced the problem with deltas.
How i need to maitain delta for above view.
please give me solution for above problem.
Thanks & Regards,
Guna.

Hi,
If you have timestamp field in the view it is better use the Timestamp for the generic delta. Else try to include a timestamp field in the view.
Also check this forum.
How to set the delta for existing generic data source
Delta Updating a Master Data Infoobject
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Assign points if this is helpful
Rgs,
I.R.K

64bit CR-Enterprise wont talk with 32bit data source, 32bit IDT wont use 64bit connection for universe. How do I connect them.

Hi.
I installed the full suite of tools as I am involved with a company intended to become a partner and reseller so we are trying to get everything working.
SAP Crystal Server 2013 SP1
BusinessObjects Business Intelligence platform
SAP Crystal Reports for Enterprise
SAP HANA
SAP Crystal Reports 2013 SP1
SAP BusinessObjects Explorer
SAP Crystal Dashboard Design 2013 SP1
Crystal Server 2013 SP1 Client Tools
SAP BusinessObjects Live Office 4.1 SP1
.NET SDK
I found out that BI was needed only after I installed all the others but I installed it without problem.
My issue is that the Information Design Tool (IDT) which creates my universes successfully, and even lets me open and see the dada no problem. Is using a 32bit (ODBC connected to SQL Server 2008) data source.
However, I am unable to load the .UNX in crystal reports (CR) 2011, so I used CR Enterprise (CRE) to connect to my universe. Now when I try to open the universe I start getting the following error:
[Microsoft][ODBC Driver Manager] The specified DSN contains an architecture mismatch between the Driver and Application
When I do searches online I get very generic information relating to setting up data sources. While I believe the problem is indeed with the data source, I don't believe it is setup wrong.
When I access the universe using the IDT (which uses the 32bit version of the data source to build its connection, it wont let me use a 64bit) I can load a table under the "result objects for query #1" press refresh, I get a list of data.
When I access the same universe using CRE (which "Seems" to use a 64bit data source, but I am not sure), and follow the same process as above. I get the above error.
If I cancel the process, when CRE lists the fields for the report I can later manually map these fields to an ODBC connection. But if I have to do this what is the point of using the universes at all as the end user has full access to all the various DB's available in the data source.
Thanks in advance for any help you can provide.

On the server where Crystal Reports Server is installed, create a 64-bit ODBC connection with the same name as the 32-bit connection. CRS will then automatically use the 64-bit version of the connection.
-Dell

CrystalReports error in XI 3.1 with Oracle Data Source

Having trouble running Crystal Reports with Oracle data source off XI 3.1 SP3. Reports hang through CMC or InfoView. Have no trouble on identical environment (presumably) with the same reports. Basically this happened after migration.
Report can be run on designer on the server box (suggesting the connection is good) however once uploaded to CMS, it hangs with error. This is not about an specific report only reports with Oracle Data source (Oracle client already installed and connection established)
Any comments appreciated.

Thank you for your reply.
Seems like a re-boot resolved the problem.
Edited by: Amir Eskandari on Feb 10, 2011 3:57 PM

XmlDataProvider .... is gone completely in my Xaml file. Why? How many different ways to deal with xml data source through WPF

I followed a procedure described in a book.
1. insert "Inventory.xml" file to a project "WpfXmlDataBinding" .
2. add the XML data source through the data panel of "blend for 2013", named it "InventoryXmlDataStore" and store it in the current document.
3. dragged and droppped the nodes from the Data panel onto the artboard.
Then I checked my Xaml file against the one provided by the book
Xaml file by the book:
<Window.Resources>
<XmlDataProvider x:Key="InventoryDataSource"
Source="\Inventory.xml"
d:IsDataSource="True"/>

<DataTemplate x:Key="ProductTemplate">
<StackPanel>
<TextBlock Text="{Binding XPath=@ProductID}"/>
<TextBlock Text="{Binding XPath=Cost}"/>
<TextBlock Text="{Binding XPath=Description}"/>
<CheckBox IsChecked="{Binding XPath=HotItem}"/>
<TextBlock Text="{Binding XPath=Name}"/>
</StackPanel>
</DataTemplate>
</Window.Resources>
<Grid>
<ListBox HorizontalAlignment="Left"
ItemTemplate="{DynamicResource ProductTemplate}"
ItemsSource="{Binding XPath=/Inventory/Product}"
Margin="89,65,0,77" Width="200"/>
</Grid>
my Xaml file:
<Window x:Class="WpfXmlDataBinding.MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Title="MainWindow" Height="922" Width="874">
<Window.Resources>
<DataTemplate x:Key="ProductTemplate">
<StackPanel>
<TextBlock Text="{Binding XPath=@ProductID}"/>
<TextBlock Text="{Binding XPath=Cost}"/>
<TextBlock Text="{Binding XPath=Description}"/>
<CheckBox IsChecked="{Binding XPath=HotItem}"/>
<TextBlock Text="{Binding XPath=Name}"/>
</StackPanel>
</DataTemplate>
</Window.Resources>
<Grid DataContext="{Binding Source={StaticResource InventoryXmlDataStore}}">
<ListBox HorizontalAlignment="Left" Height="370"
ItemTemplate="{DynamicResource ProductTemplate}"
ItemsSource="{Binding XPath=/Inventory/Product}"
Margin="65,55,0,0" VerticalAlignment="Top" Width="270"/>
</Grid>
</Window>
All looks quite the same except the <XmlDataProvider ....> part under <Window.Resources>, which is gone completely in my Xaml file.
1, Why?
2, How many different ways to deal with xml data source through WPF?
Thanks, guys.
(ps My "WpfXmlDataBinding" runs without problem through.)

Never do yourself down Richard.
Leave that to other people.
It's quite common for smart developers to think they're not as good as they are.
I coach a fair bit and it's a surprisingly common feeling.
And to repeat.
Never use anything ends .. provider. They're for trivial demo apps. Transform xml into objects and use them. Write it back as xml. Preferably, use a database.
You want to read a little mvvm theory first.
http://en.wikipedia.org/wiki/Model_View_ViewModel
Whatever you do, don't read Josh Smiths explanation. I used to recommend it but it confuses the heck out newbies. Leave that until later.
Laurent Bugnion did a great presentation at mix10. Unfortunately that doesn't seem to be working on the MS site, but I have a copy. Download and watch:
http://1drv.ms/1IYxl3z
I'm writing an article at the moment which is aimed at beginners.
http://social.technet.microsoft.com/wiki/contents/articles/30564.wpf-uneventful-mvvm.aspx
The sample is just a collection of techniques really.
I have a sample which involves no real data but is intended to illustrate some aspects of how viewmodels "do stuff" and how you use datatemplates to generate UI.
I can't remember if I recommended it previously to you:
https://gallery.technet.microsoft.com/WPF-Dialler-simulator-d782db17
And I have working samples which are aimed at illustrating line of business architecture. This is an incomplete step by step series but I think more than enough to chew on once you've done the previous stuff.
http://social.technet.microsoft.com/wiki/contents/articles/28209.wpf-entity-framework-mvvm-walk-through-1.aspx
The write up for step2 is work in progress.
https://gallery.technet.microsoft.com/WPF-Entity-Framework-MVVM-78cdc204
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML

Query for records on a block with Query Data Source Type : Procedure

Hi All,
The veriosn of form I'm using is:
Forms [32 Bit] Version 6.0.8.23.2
I have a block based on a procedure.
But when I enetr-query and search for records specific to ceratin criteria even then the result of the Query is all records.
Is Query not allowed on a block with Query Data Source Type : Procedure.
Hope my question is clear.
Thanks in advance.
Regards
Arif

When you use a table based block, forms can construct any select with any where clause based on the given inputs. Using a procedure based block, forms cannot "know" which in or out parameter of the procedure corresponds to which item. Even if Forms could pass the value of an item to an argument automagically, the procedure would have to "do something" with the argument, and you´d have to code it.
So, any item that should be used in the where-clause must be mapped to an argument.
Perhaps it would be easier to use a table based block querying a view? For DDL, you could use an instead-of-trigger on the view.
Regards,
Gerd

Adhoc Query Requirement with Multiple Data Source

Hi All,
I have a Adhoc Query Requirement with Multiple Data Source. Is there any way to achive it. Other than Resultant set and bring into Model.
Thanks
SS

You can compare stuff in the EL, but I don't think this is what you need.
You can just use Java code in the backing bean class for all the business logic. You can use DAO classes for database access logic. Finally for displaying you can use the JSF tags such as h:outputText.

Using ConnBean and CursorBean with a Data Source

Hi all,
I',m making a web app. using the Jdev (RUP4) with OA Extension. I looked in the help menu under "About Data-Access JavaBeans and Tags". Here I found the following example, but for some stange reason I cannot get the setProperty to work.
Example: Using ConnBean and CursorBean with a Data Source This following is a sample JSP page that uses ConnBean with a data source to open a connection, then uses CursorBean to execute a query.
<%@ page import="java.sql.*, oracle.jsp.dbutil.*" %>
<jsp:useBean id="cbean" class="oracle.jsp.dbutil.ConnBean" scope="session">
<jsp:setProperty name="cbean" property="dataSource"
value="<%=request.getParameter("datasource")%>"/>
</jsp:useBean>
<% try {
cbean.connect();
String sql="SELECT ename, sal FROM scott.emp ORDER BY ename";
CursorBean cb = cbean.getCursorBean (CursorBean.PREP_STMT, sql);
out.println(cb.getResultAsHTMLTable());
cb.close();
cbean.close();
} catch (SQLException e) {
out.println("<P>" + "There was an error doing the query:");
out.println("<PRE>" + e + "</PRE>\n<P>"); }
%>
Does anyone know how to set the "Property" to a datasource and make it work?
Best regards,
MHCI

There is no point-and-click (Import Data Source Metadata) way to use an LDAP server as a datasource. You have to use the Java Function provided on dev2dev. If you need help with it, please post here.
- Mike

DATACOPY with partitioned data source

Hello,
I am actually working on the Hyperion Essbase EPM 11.1.2
I am trying to perform a Datacopy command in a HBR.
Data source are partitioned with a transparent partition.
This datacopy do not work. The HBR is really fast but when I retrieve data no data are copied.
I am wondering if this is possible to perform a datacopy command, in a HBR with partitioned data source.
I have managed to perform this datacopy throw a HBR using the command:
SET CREATEBLOCKONEQ
Target = Source;
But this method is really long.
Thanks for your answer,
Arthur.

Hi
Make sure that you have relevant Role & Authorization at Quality/PRS.
You have to Transport the Source Cube first and then Create a Generate Export Data Source in QAS. Then, replicate data sources for BW QAS Soruce System. Make sure this replicated Data Source in QAS. Only then can transport new update rules for second cube.
Hope it helps and clear

Obiee with unstructured data source

Hi,
How to work with Unstructured data sources using OBIEE 11g?Anybody any idea?examples would really help.
Is it also available in 10g also?
Please Help.
Regards,
Krish

Hi Krish,
It's actually possible to use OBIEE with unstructured data.
Even if you don't have real FK relations in your database and a proper model, OBIEE can create queries if you tell him where to find the joins and how they are defined.
The Idea is to create you FK in the physical layer and try to have a 3FN schema (star schema with Dimension and Fact) as much as possbile in your Business layer.
A very nice presentation is available on Mark Rittman webite:
http://www.rittmanmead.com/files/3_Complex_Modeling_with_OBIEE_Elio_Idema.pdf
Hope it will help you to start.
Regards
PS: Please don't forget to close the thread and assign points when your question is answerd

Extracting delta's with ODP-data source 0MATERIAL_ATTR from SAP ECC

Similar Messages

Maybe you are looking for