Extracting files error on WindowsXp,Service Pack 3
Extracting files error on WindowsXp,Service Pack 3 I'm just staring to use CS3. I'm running Windows Xp Professional
Service Pack 3.
the CS3 files are in the compact form and when I run the file ADBEPHSPCS3_WWE, I get the following messages
Preparing Files
Please wait while the downloaded files are being extracted
Then I get
A problem occurred while extracting some files. Check space on your computer and the write priviliges on the
destination folder.
This message occurs when processing the file
...\redist\WindowsXP-kb898715-x64-enu.exe
The machine am instaling on has over 25G of free space.
Please HELP
Thanks johns
Installation preparations
Mylenium
Similar Messages
-
Extracting files error on Vista
I'm just staring to use CS3. I'm running vista business.
The CS3 files are in the compact form and when I run the file ADBESTDVCS3_ESD1_WWE, I get the following messages
Preparing Files
Please wait while the downloaded files are being extracted
Then I get
A problem occurred while extracting some files. Check space on your computer and the write priviliges on the destination folder.
This message occurs when processing the file
...\redist\WindowsXP-kb898715-x64-enu.exe
The machine am instaling on has over 200G of free space.
HELP
Thanks
BrendanI have a same problem But when I run the file ADBEPHSPCS3_WWE, On Windows Xp Professional
Service Pack 3. I get the following messages
Preparing Files
Please wait while the downloaded files are being extracted
Then I get
A problem occurred while extracting some files. Check space on your computer and the write priviliges on the
destination folder.
This message occurs when processing the file
...\redist\WindowsXP-kb898715-x64-enu.exe
The machine am instaling on has over 25G of free space.
Please Help me
Thanks johns -
Error after install Service Pack 4
Put weblogic510sp4boot.jar as the first package in your JAVA_CLASSPATH
and
Put weblogic510sp4.jar as the first package in your WEBLOGIC_CLASSPATH
Cheers - Wei
Min Zheng <[email protected]> wrote in message
news:[email protected]...
Hello,
I have following errors when I start WL:
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:140)
>
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:112)
>
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:104)
>
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(Recurs
iveReloadOnModifyClassLoader.java:53)
>
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<
init>(RecursiveReloadOnModifyClassLoader.java:149)
>
at
weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextIm
pl.java:1392)
>
at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:
516)
>
at weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java,
Compiled Code)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:388)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:140)
>
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:112)
>
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:104)
>
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(Recurs
iveReloadOnModifyClassLoader.java:53)
>
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<
init>(RecursiveReloadOnModifyClassLoader.java:149)
>
at
weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextIm
pl.java:1392)
>
at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:
516)
>
at weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java,
Compiled Code)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:388)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
This erros happend only after I installed Service Pack 4, and change the
weblogic.class.path.
Thanks, -
Exchange 2007 OWA Error after installing Service Pack 3 (MSExchange OWA event 65)
Hi everyone, I have multiple servers in Exchange 2007 SP1, Windows Server 2003 SP2 64bit.
I installed SP3 and RU15 a CAS / HUB server and now I access OWA, showing the below error:
Outlook Web Access did not initialize. There has been an event for the system administrator can resolve the problem. Contact the support of the organization.
Object reference not set to an instance of an object.
Request
URL: https: // mailserver01: 443 / owa / auth / error.aspx url = https: // mailserver01 / owa / & reason = 0
Exception
Exception type: Microsoft.Exchange.Clients.Owa.Core.OwaInvalidConfigurationException
Exception message: Object reference not set to an instance of an object.
Call stack
in Microsoft.Exchange.Clients.Owa.Core.OwaConfigurationManager.CreateAndLoadConfigurationManager () in Microsoft.Exchange.Clients.Owa.Core.Globals.InitializeApplication () in Microsoft.Exchange.Clients.Owa.Core.Global.ExecuteApplicationStart (Object sender,
EventArgs e)
Inner Exception
Exception type: System.NullReferenceException
Exception message: Object reference not set to an instance of an object.
Call stack
in Microsoft.Exchange.Clients.Owa.Core.Configuration.CheckPublicFolders (ADSystemConfigurationSession session, ADObjectID [] pfdbIds, Boolean & allLegacy, Boolean & allLater) in Microsoft.Exchange.Clients.Owa.Core.Configuration..ctor (ADSystemConfigurationSession
session, String virtualDirectory , String WebSiteName, ADObjectID distinguishedName, Boolean isPhoneticSupportEnabled) in Microsoft.Exchange.Clients.Owa.Core.OwaConfigurationManager.LoadConfiguration () in Microsoft.Exchange.Clients.Owa.Core.OwaConfigurationManager.CreateAndLoadConfigurationManager
In server events next event is logged
Event Type: Error
Event Source: MSExchange OWA
Event Category: ADNotifications
Event ID:. 65
Date: 12/27/2014
Time: 7:20:54
User: Not available
Team: mailserver01
Description:
There was an error loading the configuration parameters of Outlook Web Access. Virtual directory "owa". Website: "Default Web Site".
Error message:
"Object reference not set to an instance of an object."
HOW CAN I SOLVE THIS?
thank you very much
Microsoft Certified IT Professional Server AdministratorHello
everyone,
thank you
for
answering,
finally
opened
with
Microsoft
support
case
and
showed
me
that
delete
servers
from
ADSEDIT.
I deleted
the
servers
that
should
not
be
and
immediately
everything
started
to
work
properly
Many
thanks to
all
for
the
help
Microsoft Certified IT Professional Server Administrator -
Windows Server 2008 R2 Service Pack 1 installation failed with error code 0x800f0a12
Hello,
I'm facing problem to install windows server 2008 R2 SP1. I cannot install SP1. In this server have running Exchange 2010 server. to update Win2008 R2 SP1 facing the following error:
1. Service Pack installation failed with error code 0x800f0a12.
2. Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Server 2008 R2 Service Pack 1 for x64-based Systems (KB976932).
Please suggestPlease run the system update readiness tool.
http://windows.microsoft.com/en-us/windows7/What-is-the-System-Update-Readiness-Tool?SignedIn=1
Then post the complete contents of;
%SYSTEMROOT%\Logs\CBS\CheckSUR.log
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
JSP PRECOMPILER IS NOT WORKING WITH WEBLOGIC 6.1 SERVICE PACK 5
When i compile JSPs using JSP PreCompiler in weblogic 6.1
( Service Pack 4 ) , compilation is perfect.
But when i precompile the same JSPs with weblogic 6.1 (Service Pack 5 )
, i get compilation error.
Variable Not Found error comes in service pack 5. But the same code works
well with service pack 4.
Could anyone help me ?
[java] C:\CVSMessageRouter\platform-apps\2notify\webapp\consoleapp\.\web\WE
NF\classes\jsp_servlet\_secure\__confirmation.java:280: cannot resolve symbol
[java] symbol : variable yesLinkPageText
[java] location: class jsp_servlet._secure.__confirmation
[java] htmllink0.setPage(yesLinkPageText); //[ /secure/co
rmation.jsp; Line: 32]
[java] ^
[java] C:\CVSMessageRouter\platform-apps\2notify\webapp\consoleapp\.\web\WE
NF\classes\jsp_servlet\_secure\__confirmation.java:378: cannot resolve symbol
[java] symbol : variable noLinkPageText
[java] location: class jsp_servlet._secure.__confirmation
[java] htmllink0.setPage(noLinkPageText); //[ /secure/con
mation.jsp; Line: 37]
[java] Error: compilation of jsp file /secure/confirmation.jsp (java file C
VSMessageRouter\platform-apps\2notify\webapp\consoleapp\.\web\WEB-INF\classes
p_servlet\_secure\__confirmation.java failed):
[java] ^
[java] null
[java] 2 errors
[java] Error: [jspc]: 1 file(s) failed:
[java] /secure/confirmation.jsp
[java] java.io.IOException: Compiler failed executable.exec(java.lang.String
Can you post the jsp page or a example which doesnt compile in sp5. It seems
difficult to guage what the problem could be from looking at the error.
--Nagesh
"george vargeese" <[email protected]> wrote in message
news:40c56502$1@mktnews1...
>
> When i compile JSPs using JSP PreCompiler in weblogic 6.1
> ( Service Pack 4 ) , compilation is perfect.
>
> But when i precompile the same JSPs with weblogic 6.1 (Service Pack
5 )
> , i get compilation error.
>
> Variable Not Found error comes in service pack 5. But the same code
works
> well with service pack 4.
>
> Could anyone help me ?
>
>
> [java]
C:\CVSMessageRouter\platform-apps\2notify\webapp\consoleapp\.\web\WE
> NF\classes\jsp_servlet\_secure\__confirmation.java:280: cannot resolve
symbol
>
> [java] symbol : variable yesLinkPageText
> [java] location: class jsp_servlet._secure.__confirmation
> [java] htmllink0.setPage(yesLinkPageText); //[
/secure/co
> rmation.jsp; Line: 32]
> [java] ^
> [java]
C:\CVSMessageRouter\platform-apps\2notify\webapp\consoleapp\.\web\WE
> NF\classes\jsp_servlet\_secure\__confirmation.java:378: cannot resolve
symbol
>
> [java] symbol : variable noLinkPageText
> [java] location: class jsp_servlet._secure.__confirmation
> [java] htmllink0.setPage(noLinkPageText); //[
/secure/con
> mation.jsp; Line: 37]
> [java] Error: compilation of jsp file /secure/confirmation.jsp (java
file C
>
VSMessageRouter\platform-apps\2notify\webapp\consoleapp\.\web\WEB-INF\classe
s
> p_servlet\_secure\__confirmation.java failed):
> [java] ^
> [java] null
> [java] 2 errors
> [java] Error: [jspc]: 1 file(s) failed:
> [java] /secure/confirmation.jsp
> [java] java.io.IOException: Compiler failed
executable.exec(java.lang.String
>
>
-
Service Pack 1 for Weblogic 6.0 install fails
Hi,
I have weblogic 6.0 installed in directory E:\programs\bea . This is
a winnt machine.
When I install the service pack 1, I get the following error -
"WebLogic Server Service Pack 1 Installation failed. You do not seem
to have WebLogic Server 6.0 installed for BEAHOME E:\programs\bea."
Thanks
VipulI captured the debug screen for install anywhere, and it is throwing an
exception "com.bea.installer.registry.RegistryException: file is read only
can not update"
Below is the debug output,
Thanks
Vipul Manglik
original working dir is: |D:\Temp\I986930988\Windows|
CONTROL KEY DOWN
application dir is: |D:\Temp\I986930988\Windows|
app_path : |D:\Temp\I986930988\Windows\install_sp1.exe|
arg 0: |W:\Software Downloads\WebLogic\weblogic
6.0\servicepacks\wls60sp1_upgrade_win.exe|
reading properties from: |D:\Temp\I986930988\Windows\install_sp1.lax|
Searching through the registry for VMs...
looking in E:\Programs\JRE\1.3\bin
Found: E:\Programs\JRE\1.3\bin\java.exe
Found: E:\Programs\JRE\1.3\bin\javaw.exe
looking in C:\Program Files\Oracle\jre\1.1.7\bin
Found: C:\Program Files\Oracle\jre\1.1.7\bin\jre.exe
Found: C:\Program Files\Oracle\jre\1.1.7\bin\jrew.exe
looking in E:\Programs\JRE\1.3\bin
Found: E:\Programs\JRE\1.3\bin\java.exe
Found: E:\Programs\JRE\1.3\bin\javaw.exe
looking in E:\Programs\JRE\1.3\bin
Found: E:\Programs\JRE\1.3\bin\java.exe
Found: E:\Programs\JRE\1.3\bin\javaw.exe
...Finished searching through the registry for VMs
Searching through the path for VMs...
Looking in E:\programs\bea\jdk130\jre\bin
Found: E:\programs\bea\jdk130\jre\bin\java.exe
Found: E:\programs\bea\jdk130\jre\bin\javaw.exe
Looking in E:\programs\enJin\bin
Looking in E:\programs\enJin\odb\6_0_0\NT\bin
Looking in E:\programs\enJin\6_0_0\NT\bin
Looking in E:\programs\enJin\6_0_0\NT\bin
Looking in E:\programs\enJin\6_0_0\NT\bin
Looking in E:\programs\enJin\6_0_0\NT\bin
Looking in c:\winnt\system32
Ignoring 'c:\winnt\system32\java.exe' because it is in a Windows System
Directory.
Ignoring 'c:\winnt\system32\javaw.exe' because it is in a Windows
System Directory.
Ignoring 'c:\winnt\system32\jre.exe' because it is in a Windows System
Directory.
Ignoring 'c:\winnt\system32\jrew.exe' because it is in a Windows System
Directory.
Looking in E:\Programs\Oracle\Ora81\bin
Looking in C:\Program Files\Oracle\jre\1.1.7\bin
Found: C:\Program Files\Oracle\jre\1.1.7\bin\jre.exe
Found: C:\Program Files\Oracle\jre\1.1.7\bin\jrew.exe
Looking in E:\programs\enJin\odb\6_0_0\NT\bin
Looking in E:\PROGRAMS\VERSANT\JVI\2_4_0\lib\5.2.2\2p\
Looking in E:\PROGRAMS\VERSANT\JVI\2_4_0\bin\5.2.2\
Looking in E:\PROGRAMS\VERSANT\JVI\2_4_0\lib\
Looking in E:\PROGRAMS\VERSANT\JVI\2_4_0\lib\5.2.2\
Looking in E:\programs\weblogic\bin
Looking in E:\programs\bea\jdk130\bin
Found: E:\programs\bea\jdk130\bin\java.exe
Found: E:\programs\bea\jdk130\bin\javaw.exe
Found: E:\programs\bea\jdk130\bin\oldjava.exe
Found: E:\programs\bea\jdk130\bin\oldjavaw.exe
Looking in %PATH%
Looking in E:\Programs\OpenLink\bin
Looking in %TPEROOT%\bin
Looking in E:\Programs\Oracle\Ora81\orb\bin
Looking in E:\Programs\JavaMessageQueue1.1\bin
...Finished searching through the path for VMs
ORDERING VMS
1: E:\programs\bea\jdk130\jre\bin\java.exe (in path)
2: E:\programs\bea\jdk130\jre\bin\javaw.exe (in path)
3: C:\Program Files\Oracle\jre\1.1.7\bin\jre.exe (in path and registry at
HKEY_LOCAL_MACHINE\SOFTWAR
E\JavaSoft\Java Runtime Environment\1.1)
4: C:\Program Files\Oracle\jre\1.1.7\bin\jrew.exe (in path and registry at
HKEY_LOCAL_MACHINE\SOFTWA
RE\JavaSoft\Java Runtime Environment\1.1)
5: E:\programs\bea\jdk130\bin\java.exe (in path)
6: E:\programs\bea\jdk130\bin\javaw.exe (in path)
7: E:\programs\bea\jdk130\bin\oldjava.exe (in path)
8: E:\programs\bea\jdk130\bin\oldjavaw.exe (in path)
9: E:\Programs\JRE\1.3\bin\java.exe (in registry at
HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Plug-i
n\1.3)
10: E:\Programs\JRE\1.3\bin\javaw.exe (in registry at
HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Plug
-in\1.3)
11: E:\Programs\JRE\1.3\bin\java.exe (in registry at
HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runti
me Environment\1.3)
12: E:\Programs\JRE\1.3\bin\javaw.exe (in registry at
HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runt
ime Environment\1.3)
13: E:\Programs\JRE\1.3\bin\java.exe (in registry at
HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runti
me Environment\1.3.0)
14: E:\Programs\JRE\1.3\bin\javaw.exe (in registry at
HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runt
ime Environment\1.3.0)
Searching for console vm.
lax.nl.valid.vm.list=J2 J1 MSJ MRJ
lax.nl.current.vm=.
was not a valid Win32 executable.
SUCCESS! E:\programs\bea\jdk130\jre\bin\java.exe
BATCH SCRIPT
cd "D:\Temp\I986930988\Windows"
set
CLASSPATH=D:\Temp\I986930988\InstallerData\lax.jar;D:\Temp\I986930988\Windows\resource\jdglue.zi
p;D:\Temp\I986930988\InstallerData\IAClasses.zip;D:\Temp\I986930988\InstallerData\Installer.zip;D:\T
emp\I986930988\InstallerData;
E:\programs\bea\jdk130\jre\bin\java.exe -noverify com.zerog.lax.LAX
D:\\Temp\\I986930988\\Windows\\i
nstall_sp1.lax C:\\TEMP\\env.prop
executing java...
LAX Version = 4.0
InstallAnywhere 4.0 Enterprise Edition
No plugins installed
Tue Apr 10 12:30:01 PDT 2001
Free memory = 1022 kB
Total memory = 1984 kB
No arguments.
java.class.path =
D:\Temp\I986930988\InstallerData\lax.jar
D:\Temp\I986930988\Windows\resource\jdglue.zip
D:\Temp\I986930988\InstallerData\IAClasses.zip
D:\Temp\I986930988\InstallerData\Installer.zip
D:\Temp\I986930988\InstallerData
ZGUtil.CLASS_PATH =
D:\Temp\I986930988\InstallerData\lax.jar
D:\Temp\I986930988\Windows\resource\jdglue.zip
D:\Temp\I986930988\InstallerData\IAClasses.zip
D:\Temp\I986930988\InstallerData\Installer.zip
D:\Temp\I986930988\InstallerData
java.version = 1.3.0
java.vendor = Sun Microsystems Inc.
java.home = E:\programs\bea\jdk130\jre
java.class.version = 47.0
os.name = Windows NT
os.arch = x86
os.version = 4.0
file.encoding = Cp1252
user.home = C:\WINNT\Profiles\vipulm.000
user.dir = D:\Temp\I986930988\Windows
user.language = en
user.region = US
java.compiler = null
seaFilename = wls60sp1_upgrade_win
Default location = W:\Software Downloads\WebLogic\weblogic
6.0\servicepacks\
UI Mode set to Default - AWT. No UI mode specification was given.
focus ownerZeroGu[win0,387,357,506x310,layout=java.awt.BorderLayout]
Installer: InstallAnywhere 4.0 Enterprise Edition Build 824
Installer: looking for Win32 DLLs in
D:\Temp\I986930988\InstallerData\..\Windows\resource\
No Default Install Set Specified: null
javaVersion=1.3 required=1.3
com.bea.installer.registry.RegistryException: file is read only can not
update
at com.bea.installer.registry.XmlParser.fail(XmlParser.java:1029)
at
com.bea.installer.registry.XmlParser.addElement(XmlParser.java:578)
at
com.bea.installer.registry.Registry.openRelease(Registry.java:196)
at
com.bea.installer.registry.ReleaseEntry.<init>(ReleaseEntry.java:67)
at com.bea.installer.BeforeCopying.install(BeforeCopying.java:49)
at
com.zerog.ia.installer.actions.CustomAction.installSelf([DashoPro-V1.2-120198])
at com.zerog.ia.installer.AAMgr.a([DashoPro-V1.2-120198])
at com.zerog.ia.installer.AAMgr.b([DashoPro-V1.2-120198])
at com.zerog.ia.installer.AAMgr.e([DashoPro-V1.2-120198])
at com.zerog.ia.installer.AAMgr.h([DashoPro-V1.2-120198])
at
com.zerog.ia.installer.AAMgr.actionPerformed([DashoPro-V1.2-120198])
at java.awt.Button.processActionEvent(Button.java:329)
at java.awt.Button.processEvent(Button.java:302)
at java.awt.Component.dispatchEventImpl(Component.java:2595)
at java.awt.Component.dispatchEvent(Component.java:2499)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:319)
at
java.awt.EventDispatchThread.pumpOneEvent(EventDispatchThread.java:103)
at
java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:93)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:84)
Vipul wrote:
Hi,
I have weblogic 6.0 installed in directory E:\programs\bea . This is
a winnt machine.
When I install the service pack 1, I get the following error -
"WebLogic Server Service Pack 1 Installation failed. You do not seem
to have WebLogic Server 6.0 installed for BEAHOME E:\programs\bea."
Thanks
Vipul -
Hello,
I am going through the following Technet article:
Repair Microsoft Dynamics CRM Server 2013 (
https://technet.microsoft.com/en-us/library/hh699749(v=crm.6).aspx )
The repair option asks for the original CRM DVD media location. The problem is that how the repair procedure knows about the service packs or update rollup files location?
My concern is that the repair procedure replaced the update DLLs (or other files installed by CRM service pack installer) by the RTM files in the original setup DVD.
Is there any special consideration for repairing Microsoft Dynamics CRM Server 2013 once the Service Pack or Update Rollup is installed?
Thank you,Hello,
I am going through the following Technet article:
Repair Microsoft Dynamics CRM Server 2013 (
https://technet.microsoft.com/en-us/library/hh699749(v=crm.6).aspx )
The repair option asks for the original CRM DVD media location. The problem is that how the repair procedure knows about the service packs or update rollup files location?
My concern is that the repair procedure replaced the update DLLs (or other files installed by CRM service pack installer) by the RTM files in the original setup DVD.
Is there any special consideration for repairing Microsoft Dynamics CRM Server 2013 once the Service Pack or Update Rollup is installed?
Thank you, -
In Windows 8 I received the error iTunes Library .iti file is locked on a disk or you do not have permission for this file. I can open itunes in the compatibility mode for Windows XP Service Pack 3.
I've tried changing permissions and sharing - nothing seems to work. mat be a Windows 8 issue???You also need to make sure you have both read and write permission for the file, or for the whole iTunes folder for that matter. That's also done in Get Info for the file or folder concerned.
Read the part about changing permissions on the iTunes folder in: https://discussions.apple.com/message/11583914 -
I want a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat Pro 10.1.12 file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser. Unknown Error. (123)"
Change browsers. See what happens.
Be well... -
Having trouble when I launch iTunes (version 11.0.2) on my Dell Laptop running Windows 7 Professional (service pack 1). I get an error message indicating software required to communicate with iPod and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you? I normally respond with OK and it immediately tells me "could not be repaired. Please reinstall iTunes..." I have done this a number of times to no avail.
I also notice Quicktime is not getting installed at all.
That one is normal nowadays (ever since the iTunes versions 10.5.x).
The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
Office 2010 Service Pack 2 (SP2) installation failing with error code 0x80070643 and B56
I've been trying to install Office 2010 service pack 2 (32 bit) multiple ways without success. I've tried getting it directly from Microsoft Update, downloading the full file from Microsoft and installing it, using WSUS to deploy to clients, and I've tried
using LANDesk to deploy it. All methods are failing.
I need a solution that doesn't involve touching each PC manually, as I have a feeling this error is going to occur on several hundred PC's in my organization. So far on a group of 15-20 test PC's, every one has failed. We have not had problems with any other
Microsoft Updates before this one.
When I try Microsoft Update, I receive the following error:
Code B56 Windows Update encountered an unknown error.
Below is the WindowsUpdate.log excerpt:
2013-08-06 12:45:33:313 3952 dc4 Handler :::::::::::::
2013-08-06 12:45:33:328 3952 dc4 Handler :: START :: Handler: MSI Install
2013-08-06 12:45:33:328 3952 dc4 Handler :::::::::
2013-08-06 12:45:33:328 3952 dc4 Handler : Updates to install = 7
2013-08-06 12:45:33:328 3952 dc4 Handler Extracting MSP file stored in CAB officesuiteww-x-none.cab
2013-08-06 12:45:43:671 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:43:671 3952 dc4 Handler Extracting MSP file stored in CAB proofing-en-us.cab
2013-08-06 12:45:43:702 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:43:702 3952 dc4 Handler Extracting MSP file stored in CAB proof-fr-fr.cab
2013-08-06 12:45:43:983 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:43:983 3952 dc4 Handler Extracting MSP file stored in CAB clientshared64ww-x-none.cab
2013-08-06 12:45:44:217 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:44:217 3952 dc4 Handler Extracting MSP file stored in CAB officesuitemui-en-us.cab
2013-08-06 12:45:44:482 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:44:482 3952 dc4 Handler Extracting MSP file stored in CAB clientshared64mui-en-us.cab
2013-08-06 12:45:44:529 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:44:529 3952 dc4 Handler Extracting MSP file stored in CAB proof-en-us.cab
2013-08-06 12:45:44:716 3952 dc4 Handler MSP update {00000000-0000-0000-0000-000000000000}.0 using full-file patch
2013-08-06 12:45:44:716 3952 dc4 Handler : Batch installing 7 updates
2013-08-06 12:45:46:417 3952 dc4 Handler List of MSPs in transaction:
2013-08-06 12:45:46:417 3952 dc4 Handler C:\Windows\SoftwareDistribution\Download\29f5035d168bf9e9d0369f84037ff787\img\officesuiteww-x-none.MSP
2013-08-06 12:45:46:417 3952 dc4 Handler MSP final command line: DISABLESRCPROMPT=1 LOCALCACHESRCRES=0 NOLOCALCACHEROLLBACK=1 REBOOT=REALLYSUPPRESS MSIRESTARTMANAGERCONTROL=Disable
2013-08-06 12:46:42:265 112 600 Report Uploading 2 events using cached cookie, reporting URL =
http://wsus:8530/ReportingWebService/ReportingWebService.asmx
2013-08-06 12:46:42:358 112 600 Report Reporter successfully uploaded 2 events.
2013-08-06 12:47:52:012 3952 dc4 Handler MSP Error List:
2013-08-06 12:47:52:012 3952 dc4 Handler 1: 2902 2: ixfAssemblyCopy
2013-08-06 12:47:52:012 3952 dc4 Handler : MSI transaction completed. MSI: 0x80070643, Handler: 0x8024200b, Source: No, Reboot: 0
2013-08-06 12:47:52:012 3952 dc4 Handler : WARNING: First failure for update {365F23BF-5D31-4811-A197-29C2C0751961}, transaction error = 0x8024200b, MSI result = 0x80070643, MSI action = InstallFiles
2013-08-06 12:47:52:012 112 938 AU >>## RESUMED ## AU: Installing update [UpdateId = {9C5E43A3-3AE9-434D-B105-A9D7902D5F9F}]
2013-08-06 12:47:52:012 112 938 AU # WARNING: Install failed, error = 0x80070643 / 0x00000B56
2013-08-06 12:47:52:012 3952 dc4 Handler : WARNING: Operation failed at update 0, Exit code = 0x8024200B
2013-08-06 12:47:52:012 3952 dc4 Handler :::::::::
2013-08-06 12:47:52:012 3952 dc4 Handler :: END :: Handler: MSI Install
2013-08-06 12:47:52:012 3952 dc4 Handler :::::::::::::
2013-08-06 12:47:52:168 112 5c4 Agent *********
2013-08-06 12:47:52:168 112 5c4 Agent ** END ** Agent: Installing updates [CallerId = AutomaticUpdates]
2013-08-06 12:47:52:168 112 5c4 Agent *************
2013-08-06 12:47:52:168 112 938 AU Install call completed.
2013-08-06 12:47:52:168 112 938 AU # WARNING: Install call completed, reboot required = No, error = 0x00000000
2013-08-06 12:47:52:168 112 938 AU #########
2013-08-06 12:47:52:168 112 938 AU ## END ## AU: Installing updates [CallId = {87C0C0A5-18CE-45A0-9376-989DCA9CACCA}]
2013-08-06 12:47:52:168 112 938 AU #############I too have been unable to install the Office 2010 SP2 update on either a Win7 or a Win 8 system. Researching the errors I got led me to discover the following:
1. Many people are encountering errors during the SP2 installation. Some were able to get around it by downloading the self-installing package and bypassing Windows Update. Some were able to get it installed by first doing a Repair on Office 210 itself
first, and then installing SP2. But many others have not been able to install it at all.
2. Apparently a common and insurmountable issue that prevents SP2 from installing is the lack of the MSOCACHE directory. This directory normally gets installed on a machine during the original install of Office, and contains all the install files used
during the installation. Apparently the idea behind creating MSOCACHE was to allow subsequent updates without requiring the user to have the original source CD available.
The problem is that if MSOCACHE is deleted, which is an option many people choose, you can then no longer do any updates to Office.
I am one of those people.
I found a posting that described a way to recreate MSOCACHE from the source CD. I did that, and the SP2 update actually got farther - it started to install stuff but then stopped and asked for a particular file. I found the file on the CD and
pointed the installer to it, but it said the file was not found and quit. So my install still failed.
The last response I got at the Microsoft Answers site was to wait until SP2 is debugged. It's not clear to me this will ever happen, but we'll see.
Birk Binnard http://www.birkbinnard.com -
Office 2013 with Service Pack 1 installation error about "search path"
I have an automated installation technique that has worked fine with Office 2010 Pro Plus (32-bit), incorporating the latest Service Pack into the network administrative installation point (under \updates), adding 10 foreign languages to the network administrative
installation point, creating a custom .msp with the OCT (that goes into \updates too), editing the config.xml files, and then running setup.exe from that network administrative installation point. This works on 32-bit Windows XP clients and on 32- and 64-bit
Windows 7 clients.
For Office 2013 Pro Plus, I have built the network administrative installation point exactly the same way (original DVD files + languages + SP1 updates + config.xml updates), but the installation is failing with every type of client, all with
the same error message. The network administrative installation point is readable by the normal installing account, but I even get the same error when I login as me and initiate setup.exe manually, and I have all rights to this point.
Here's the critical point from a log file:
2014/03/11 11:53:49:691::[2372] DistributionPoint parsed. The distribution point is now set to: \\archive.ads.college.edu\archive\KBOXalt\Office2013
2014/03/11 11:53:49:691::[2372] COMPANYNAME specified in config.xml.
2014/03/11 11:53:49:691::[2372] USERNAME specified in config.xml.
2014/03/11 11:53:49:800::[2372] Setupexe Resiliency Mode is set to [PerformIfApplicable]; thus Resiliency is [disabled] for the [InstallExecutionMode]
2014/03/11 11:53:49:910::[2372] Searching for default versions of resource files under the folder [\\archive.ads.college.edu\archive\KBOXalt\Office2013].
2014/03/11 11:53:50:019::[2372] Error: GetDirectories: search path \\archive.ads.college.edu\archive\KBOXalt\Office2013 does not exist
ErrorCode: 0(0x0). Failed final attempt to load a setupexe resource file.
2014/03/11 11:53:50:019::[2372] Error: GetDirectories: search path \\archive.ads.college.edu\archive\KBOXalt\Office2013 does not exist
Type: 34::InvalidDirectory.
2014/03/11 11:53:50:019::[2372] WER element [SuppressModal] is set to value [true]
2014/03/11 11:53:50:019::[2372] WER element [P4] is set to value [InvalidDirectory]
2014/03/11 11:53:50:019::[2372] Catalyst execution finished: 03/11/2014 11:53:50. Return code: 30034. Exception caught: InvalidDirectory.
2014/03/11 11:53:50:019::[2372] PERF: TickCount=894821 Name=RunSetup Description=End function
I cannot find any references to this exact error anywhere on the Internet. Can anyone tell me what this means, and how I fix it?As automated, the utility that runs setup.exe maps a drive letter to
\\archive.ads.college.edu\archive\KBOXalt using a kboxmap AD account, which has read access to the whole \KBOXalt tree. I used that same kboxmap AD account manually to simulate what the utility does, and hit the same problem. But here's what's
odd: right next to that
\\archive.ads.college.edu\archive\KBOXalt\Office2013 directory is an
\\archive.ads.college.edu\archive\KBOXalt\Office2010 directory, both created the same way, and the Office 2010 installation has always worked perfectly using the kboxmap AD account. I don't understand why Office 2013 is only working for an account with
read/write access, where Office 2010 worked fine for an account with only read access. Especially when the Office 2013 resource kit documentation clearly states that the account running the installation should only have read access, nothing more. (All this
KBOX stuff comes from the fact that our deployment environment is a Dell KACE KBOX 1000. However, that plays no part in the problem: ignoring the KBOX 1000, I can manually recreate the problem every time.) -
Error message while while upgrading FIM RTM to FIM Service pack 1
Hi All,
I am getting the below error message while while upgrading FIM RTM to FIM Service pack 1, I had followed the same procedure in one of my test lab and it upgraded successfully. Kindly advice.
Regards,
Anirban SinghaHI Dominik,
Thanks for reply,
Event Error,
Product: Forefront Identity Manager Synchronization Service - Update 'FIM Synchronization Service Hotfix KB 2814853' could not be installed. Error code 1603. Additional information is available in the log file E:\FIMR2-SP1\logfile.txt.
MSI Logs:
CustomAction DetectServiceAccount returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
Action ended 15:06:14: DetectServiceAccount. Return value 3.
MSI (c) (C4:10) [15:06:14:359]: Doing action: SetupCompleteError
Action 15:06:14: SetupCompleteError.
Action start 15:06:14: SetupCompleteError.
MSI (c) (C4:20) [15:06:14:365]: Transforming table Binary.
MSI (c) (C4:20) [15:06:14:365]: Transforming table Binary.
MSI (c) (C4:20) [15:06:14:365]: Note: 1: 2262 2: Binary 3: -2147287038
Action 15:06:14: SetupCompleteError. Dialog created
MSI (c) (C4:A0) [15:06:14:376]: Note: 1: 2731 2: 0
Action ended 15:06:19: SetupCompleteError. Return value 2.
Action ended 15:06:19: INSTALL. Return value 3.
MSI (c) (C4:10) [15:06:19:627]: Destroying RemoteAPI object.
MSI (c) (C4:E0) [15:06:19:628]: Custom Action Manager thread ending.
Property(C): DiskPrompt = [1]
Property(C): UpgradeCode = {545334D7-13CD-4BAB-8DA1-2775FA8CF7C2}
Property(C): PID = 04783-270-0001260-04309
Property(C): MIIS_PATH = C:\Program Files\Microsoft Forefront Identity Manager\2010\Synchronization Service\
Property(C): INSTALLDIR = C:\Program Files\Microsoft Forefront Identity Manager\2010\
Property(C): WWF35 = 3.5.30729.5420
Property(C): DOTNETINSTALLROOT = C:\Windows\Microsoft.NET\Framework64\
Property(C): SQLDB = FIMSynchronizationService
Property(C): EVENTSOURCE = FIMSynchronizationService
Property(C): EVENTPRODUCTNAME = FIM Synchronization Service
Property(C): SYNCINSTALLPATH = C:\Program Files\Microsoft Forefront Identity Manager\2010\Synchronization Service\
Property(C): GROUPADMINS = MPHASIS\FIMSyncAdmins
Property(C): GROUPOPERATORS = MPHASIS\FIMSyncOperators
Property(C): GROUPACCOUNTJOINERS = MPHASIS\FIMSyncJoiners
Property(C): GROUPBROWSE = MPHASIS\FIMSyncBrowse
Property(C): GROUPPASSWORDSET = MPHASIS\FIMSyncPasswordSet
Property(C): SQLServerStore = LocalMachine -
windows vista home premium service pack 2。error measage __(the windows installer service could not be accessed.this can occur if the windows installer is not correctly installed .contact your support personnel for assistance )no error nurber
Hi Abdallah,
According to your description, could you please post the summary and detail logs for further analysis? By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
Usually, the error occurs when the Windows Installer Service is not running or the Windows Installer registry settings are corrupted. I recommend you reset the Windows Installer Service settings in the registry and restart the Windows Installer Service,
then reinstall SQL Server 2008 R2. For more details, please review this similar
article.
Thanks,
Lydia Zhang
Maybe you are looking for
-
How do I create a shortcut to type a text string?
I often need to enter my email address into various text data entry fields when online. I would like to be able to use some simple combination of keys to have the address typed automatically. How do I construct such a capability?
-
Hi all. I need to parse an XML Schema and get the following information out of it: list of elements allowed in schema list of attributes for each element - which are required and which optional given an element name get elements that it can contain e
-
Regarding passing blank characters to internal table field
Hi All, I have small issue. Actual issue is I am having one internal table field as <b>oper_table-arbid</b> in the program i will actually pass first 4 characters of that field into another internal table <b>i_download_operation-arbid.</b> Then if <b
-
Telstra Nokia N95 software update?
Hi all, I recently purchased an N95 from a Telstra shop on 15/05/08, tried to update my firmware, have the latest version of PC suite 6.86.93, the N series PC suite, and the software updater. I've been reading the news on the N95 and Nokia states it'
-
Directory Admin no longer authenticates---HELP
I used to be able to authenticate with the directory server, now it keeps saying "The login information is not valid for this server. The server failed accept the login information you provided. Check the Name and Password and try to log in again or